No Memory Cards Working
Jul 11, 2011
The problem is that no kinds of storage cards are currently working perfect on my computer.For an example no phones can be connected, have tryed 2 htc's with microsd cards, and a sony ericson with an m2 card, and same problem. Also if i try to open any SD cards, like camera it dosent work.The thing is that it comes up as removable drive, but when i try to open it it just says please insert card. I have tryed deleting, installing reformatting drivers, and cards like crazy and its the same. I have also tryed changing the drive letters around but the issue is the same.The only thing that makes the work is the following: If i leave the card in the cardreader, or a phone connected, then restarts the pc whitout removing the card or phone, then it works when its rebooted. but asoon as i remove the card/phone and reinsert them the issue is still there "please insert card".I have even changed the motherboard, cpu, and memory, and formated the computer 3 times but still same issue. So im thinking that windows is installing wrong driver or something? [code] Also the issue was the same on my old computer also running windows 7 that had a socket 775 build.
View 9 Replies
ADVERTISEMENT
Apr 11, 2011
I recently update my vaio vgn-cr205e from win vista to win 7 ultimate 32 bits everything look great but suddenly when I try to use the webcam i got a message that is not conected and also I try to use my memoy cards sd and pro duo and also dont work I look everywhere trying to find the drivers but no
View 3 Replies
View Related
May 23, 2011
I original bought 4x2g of these:[URL]- G.SKILL 4GB (2 x 2GB) 240-Pin DDR2 SDRAM DDR2 1066 (PC2 8500) Dual Channel Kit Desktop Memory Model F2-8500CL6D-4GBNQ They are rated 6-6-6-18 with a Cas Latency of 6, also have a speed of DDR2 1066 (PC2 8500)Now since I only need to replace 1 stick, I figured try to get the same exact stick, but it seems they dont sell the exact ones any more.So I was going to get this single 2g stick of G.Skill's: [URL]- G.SKILL 2GB 240-Pin DDR2 SDRAM DDR2 800 (PC2 6400) Desktop Memory Model F2-6400CL5S-2GBPQBut it seems to be rated a bit slower?5-5-5-15, lower voltage, a Cas Latency of 5 & its speed is DDR2 800 (PC2 6400)Will this limit the computers ability to really perform at it's highest possible rate of 8g if the 4th stick is slower like that?
View 3 Replies
View Related
Feb 6, 2012
any computer running windows 7 but this new laptop i have (hp g6 core i5) seems to be continually corrupting memory cards out of my camera! when i first insert the memory card and view the pictures and go to change their orientation; windows comes up with a message saying it can't change it because the picture is no longer there! when you go back to view the folders on the card they appear as symbols as they have been corrupted! the first time it happened i downloaded (and purchased the key) for recovery which seems to do a good job of recovering the images. its really annoying me as to why it is happening! i'm now very careful and transfer images from the sd to the laptop straight away and safely remove the card afterwards. the laptop also corrupted a different memory card when the lid was shut and re-opened but im assuming this is because the computer was hibernating without the card being safely removed.has anybody else had this problem and if so how can it be sorted?
View 7 Replies
View Related
Apr 30, 2012
I stuck a compact flash memory card into my computer and it wouldn't see it. Somewhere I saw that the computer sees memory cards as drive K. It so happens that some time ago I set up a partition on the hard drive as K.
I went into Disk Management and changed the letter to R, restarted the computer. It now won't see any drive. Everything on the desktop seemed to work and I could access the internet, but whenever I tried to look at C or R it would say something like 'server failed', or 'cannot locate server'.
So I went back to Disk Management and changed the letter back to K and now everything works fine. I have a number of programs located in K. If I can I would rather re-assign which drive the computer uses for memory cards (Win7, 64bit)
View 2 Replies
View Related
Apr 19, 2012
I have a Toshiba Satellite L655-1EM laptop running windows 7 home premium 64bit.OEM came pre-installed. I've had the laptop about 6 months.It works great but I seem to get the BSOD quite a lot. I noticed it only seems to happens when I'm using either of my external hard drives or SD cards. Usually when I am transferring a batch of large files between drives.
View 2 Replies
View Related
Oct 28, 2009
I have two different ATI cards installed in one system, each with their own 22" HP LCD. One is an ATI FireGL V5600 for my CAD applications and the other is an X1900XT for Left4Dead. When I ran Windows Update after I installed Windows 7, it immediately downloaded an updated driver for the V5600 (8.623, I think) but when it installed it, it disabled the X1900XT.
I went to the Device Manager, uninstalled the X1900XT, then Scanned for Hardware Changes, it finds the X1900XT, installs the driver and it works again. Unfortunately, it also reverts the driver for the V5600 back to 8.56.1.15 which isn't even a valid driver for the V5600 as seen on this page.
I'm not sure why I can't have independent drivers for each card. I know for a fact that this is supported in XP as I have my system dual booting with XP and it work perfectly there (see photo 1 and photo 2 it's hard to tell, but both of those screenshots are from XP with each card having independent drivers). The downside is that my CAD apps don't recognize the V5600 with driver 8.56.1.15 as the workstation card it is, and my graphics are severely crippled in those apps.
I would like to report this to Microsoft, but unlike in RC1 there is no way to report a bug.
View 3 Replies
View Related
Feb 7, 2012
I have three memory sticks non now work when entered into usb. Have tried webcam and mouse in same usb they each load correctly. When I enter memory stick I hear an audio ping but no loading follows. I have tried checking if driver is up to date etc and all shows correct
View 45 Replies
View Related
Feb 20, 2010
I have tried another memory stick and that one isn't working either. However i have tried them on my laptop and they do work. It keeps claiming that the device drivers are not installing successfully, even though My memory stick clearly works. I performed a DriveCure scan, and everything is installed successfully. I have also tried other usb devices, such as my wacom tablet and it works fine. So it only seems to be having problems with External Memory Devices.
View 5 Replies
View Related
Jul 14, 2012
I downloaded about 14 CD's into My Docs Music Library and then sent them to a Kingston 2GB Data Traveler 101 USB 2.0 memory stick which plays OK on my computer.However when I insert the stick into a music player...nothing.
View 2 Replies
View Related
Aug 1, 2012
i plug my memory stick in the usb n it normaly comes up with a window to open it but now it dont all i get is a red light on the memory stick.
View 1 Replies
View Related
Jan 8, 2013
Memory card not working?
View 2 Replies
View Related
Mar 20, 2012
My games are not working it is saying that initialising Graphics
View 2 Replies
View Related
May 23, 2012
my PCI device is not working and i cannot use my my memory card,at all.
View 2 Replies
View Related
Aug 26, 2012
My 16 GB Centon memory stick I purchased @ Staples in Canada quit working & is not recognized in my computer under search. I have even installed the stick in another port on my computer & it is still not recognized.I have installed other USB sticks in the same port on my computer & they work fine, I can even download onto them.
View 1 Replies
View Related
Apr 25, 2012
gta not find enough vidio memory
View 1 Replies
View Related
Apr 8, 2011
My USB ports and memory card reader have all of a sudden stopped working correctly . the mem card slots i cant tell if they are working at all but the usb ports are still sending power as iv still be able to charge my mp3 player but it just will not send any data .. this is made even more frustrating as i was using them both less that 10 hours ago iv not installed any new software and i have not changed any hardware so tbh im completely at a loss as to why they arnt working .iv done only the basic things to attempt to get them working again.. i un-installed them from device manager and let windows re-install them to no avail . I also went in to my bios and made sure that the ports were enabled .. they were
View 2 Replies
View Related
Aug 12, 2011
how to convert a shared video memory into dedicated video memory and system video memory? me and my friend have the same specs computers but the same game runs slow in my computer but it runs smoothly in his computer?
View 1 Replies
View Related
Oct 6, 2012
i am having a problem with my memory getting tied up / used up and not being able to access it again until i reboot.
machine: dell xps studio 8100
os: win 7,
processor: i7 2.8
ram: 16gb (max it will take)
video: ati radeon 5700 (running 3 monitors)
versions: as far as i know i am running current versions of everything, including video drivers, flash, chrome, etc. (i've tried running chrome with both the build in version of flash and the system version -haven't seen a difference)
browser: i nearly exclusively run chrome / canary with auto-updates so am at the latest builds.what seems to cause me to use up / run out of memory is after i play videos (Internet, netflix, etc.), the memory seems to get used, but is not returned to the system, even if the browser is closed and re-opened.right now for example things are working fine; i rebooted my system a couple hours ago (but have not played any videos). i have adobe lightroom running, picasa, chrome and canary (currently 4 web browser windows open with 52 tabs open). task manager currently shows me using 8.20gb of ram, that seems pretty reasonable to me.
normally my system will keep running properly (if a program is closed, memory is freed up) right up until i start to play any videos (Internet, netflix, etc.) then it will start using up more memory. (of course i expect it to use more memory during playback) however, even if i restart the browser, the memory does not get freed back up. for example, just prior to the reboot, with everything closed, i was using right around 8gb of ram. once i rebooted, i was using 1.something gb of ram prior to opening any programs.however, once i start playing some videos, i never seem to be able to get my ram freed back up again unless i reboot the whole system. this is not just a problem with how much memory the system shows as being available, i frequently actually run out of memory. (task manager will show me as using around 15gb and then everything starts swapping out like crazy).
View 2 Replies
View Related
Jun 1, 2009
I find that if I run chkdsk and watch the memory usage in task manager it jumps by about 50MB every 2 seconds or so until it either finishes or hits around 3.2GB at which point my physical memory shows 99% used (I'm running 4GB), and the system of course slows to a crawl.f you just run a quick chkdsk on your boot drive you may not notice it, but try running something longer like chkdsk /r on a flash drive or chkdsk /f on a bigger internal drive (but not your OS drive as this would require a reboot) and watch the memory usage climb. I have duplicated this on both systems I have running Windows 7. My XP machine (checking the same USB flash drive) uses a much more normal amount of memory for chkdsk (20 - 30 MB).
View 9 Replies
View Related
May 22, 2010
Memory Usage Goes Up Gradually (Memory Leak)When I starting the Windows (in the first few hours) everything is normal But after 1 day or 2 (sooner or later) the amount of available memory gradually goes down and the physical memory usage increasing. This increasing, continues until the memory usage reaches near the 88% and at that point , there isn't any memory available to operate any software . Also when memory reaches that point, I can't access any drive in the HDD; because everytime I want to open any folder, the following error appears :c: is not accessible.Insufficient system resources exist to complete the requested service At this point, I even can't shutdown or restart Windows normally; I must restart windows manually by pressing the restart button.after restart, everything goes to normal again; but this problem appears again and again ...
my system :
------------------------
OS : Windows 7 x86
Cpu : Intel P4 3.0GH
Vga : nVidia 6600
MB : Gigabyte GA-8I915G Duo
PSU : Corsair 750W
RAM : 2GB DDR-400 Transcend
(I have these memories for 2 years)
Physical Memory: 2000 mb
Paging File: 2000 mb
Virtual Memory: 6000 mb
0- using some optimizing and freeing softwares like (Memory Booster Gold - RAM Saver Pro - CleanMem)
1- Scanning my computer with antivirus and antispywares
2- Changing antivirus software
3- Updating windows with all updates available via Windows Update
4- Updating drivers of all hardwares
5- Downloading and installing the following hotfixes that are related to memory leak : The memory of the nonpaged pool may leak when you enable IPsec on a computer that is running Windows Server 2008 R2 or Windows 7 A memory leak issue occurs in the Windows Management Instrumentation service on a computer that is running Windows Server 2008 R2 or Windows 7 FIX: A memory leak may occur when you use the Microsoft ActiveX Data Objects Library in Windows Vista, in Windows 7, in Windows Server 2008, or in Windows Server 2008 R2 A memory leak occurs when an ADO Recordset object calls the UpdateBatch method A nonpaged pool memory leak occurs when you use a WFP callout driver in Windows Vista, Windows 7, Windows Server 2008, or in Windows Server 2008 R2
View 7 Replies
View Related
Nov 5, 2011
I just built a new computer and started with 8GB of memory. A few weeks down the line I purchased another set of the same memory because it was on such a good deal and had great reviews (newegg). It also was working well for me, so I figured maybe more could be better.
I haven't noticed any decrease/increase in system performance except Alt-Tabbing has recently got slower. Also, Windows 7 was sitting tight on 1.3gb to 2gb of memory usage prior to the extra 8 (now 16) being added. Even when gaming, it went up to like 3gb. Now that I've added the extra it's going up to 4.5gb or better. Also, is it possible to speed up my alt-tabbing? It seems to have a good 3-4 second pause in it instead of being immediate like it was.
Computer specs:
Windows 7 HP 64-bit
gSkill 16gb 1866 memory (BIOS shows it at 1866, too)
Intel i5-2500k Sandy Bridge (OC'd 4.6 with factory Overclock presets)
ASRock z68 Extreme4 mobo
View 9 Replies
View Related
Oct 17, 2009
I have two 9500GT video cards one id Evga and one is BFG they are both 1GB DDR2. I have looked into it but you experts will know. I think it's possible to set up a crossfire configuration. It might not be worth doing but i would mostly do it for fun and to see if I can get it working. My current mobo supports it and would like to play with it.
Is it possible with the same GPU but different companies and possibly slightly different specs on the rest of the card? I thought if it the same GPU you could do it.
http://www.newegg.com/Product/Product.aspx?Item=N82E16814143150
http://www.newegg.com/Product/Product.aspx?Item=N82E16814130395
Also you might know if I can make a USB install flash drive with professional and use it to install home premium or ultimate as long as I have the licence keys?
View 4 Replies
View Related
Jul 31, 2009
Just a thought. I'm currently running an XFX 260 Black Edition on my Asus P5Q Pro MB.
I still have my old card- A BFG 8800GTS OC 512MB.
I kept meaning to ebay it but never got round to it.
Is there any way I could usefuly use it in my present set up?
View 5 Replies
View Related
Jun 5, 2012
Is it possible to put a Nvidea GTX 560 + Nvidea GTX 670 in one pc, and get them work both with one monitor?
View 7 Replies
View Related
May 5, 2009
i just installed the latest build of Windows 7 (build 7100). and there are a few problems with my graphics options. There are 2 systems that i tried this on and both are having the same problem. The first setup has a Ati Radeon X1650 by MSI, and the drivers install, signed by WDDM. Now the monitor/tv that i am using is a 42inch LCD TV, and has the 1920x1080 resolution, that is its native resolution. Windows 7, supports the resolution and has it as the recommended resolution, however, when i select it, my monitor says "mode not supported" this is the same problem i have with the HD2600XT card from ATI.
Both of these cards work in Vista Ultimate, Vista Home Premium, Vista Business, and XP Pro SP3 and XP Home SP3, and even tried Server 2008 and server 2003. all of those OS's work with the native resolution on the monitor except the Windows 7 builds. anyone have an idea why this would be??
also, for the HD2600XT i did install the latest ati driver 9-4, and nothing is fixed. right now i am running it at 1280x768, but its skewed.
if anyone has any info on this it would be great, as i have tried everything.
i have also tried installing the 9-3 drivers on both cards, manually and using the installs. the manual way was to unzip the driver package and in device manager install the drivers myself.
The one system i have plugged into it now is a Shuttle Barebone SG31G2B, 4 GB of ddr2/800 ram, quad core q6600 2.4ghz, and the hd 2600xt.
View 9 Replies
View Related
Oct 31, 2009
Microsoft says that Smart Cards can be used in conjunction with Encypting File System (EFS) to keep the encryption key off the computer.
What are smart cards, and is that the only it can be done? Why not a regular SD card or flash drive?
View 8 Replies
View Related
Sep 30, 2009
Will pci cards such as ones for connecting CCTV cameras to a PC work in Win 7 XP mode.
View 1 Replies
View Related
Dec 30, 2011
When I put a CF or an SDHC card in the internal (USB) cardreaderor in an external (USB) cardreader, those cards are not seen, although the readers are seen alright.When I disconnect the internal reader, put a card in it, and connect it again to USB, the card is seen. Take the card out, put it in again; no card. Same with he external reader.I checked Device Manager on possible wrong settings, but couldn't find anything.
View 6 Replies
View Related
Mar 9, 2009
Dont know if it should be in here Toshiba Flash Cards is a program that runs when you press 'FN' it displays a top flash card thingy that allows you to use the FN -> F2 etc... keys cant get this to work on windows 7 though anyone got any ideas ill try a few more things i think might be able to fix it but does anyone else have any ideas?
UPDATE: seems to be a error with KeNotify.exe...... When i press FN it crashes KeNotify
UPDATE 2: Running in Compatibility and/or Running as administrator still makes it crash.
View 3 Replies
View Related
Jan 15, 2013
i usually record PC games using fraps and it got me thinking to how do people record console footage and then put it on the computer.The problem is i dont know the first thing about gaming capture cards and how they work, i do know however that some of them are PCI cards.
1. if a console is connected to a T.V how is the footage captured from the console to a PC?
2. Does using capture cards also provide audio or do you need certain cables (3.5 jacks, hdmis, etc)
View 2 Replies
View Related