I can not start windows 7, and i try to restore to an earlier point in time, and it says i've not enough free space in C:. I tried using command Prompt to delete files from C, but it looks stuck in X:. I entered x:>cd "C:" and it says C: and after X:>
View 2 Replies
i am trying to get my lost data, with recover my files software but, when i scan only for scanning .max files, the programme terminates,
View 2 Replies View RelatedI have an Acer Aspireone d255 netbook that cannot recover after it has gone into sleep mode when on battery. My computer geek had a look at it and said it had diseases which he removed and put combofix, mbam and superantispy on the netbook.
View 2 Replies View RelatedRecently I was attacked with malware and I had no internet security. It messed up some programs, changed the description of processes etc. I read up on how to get rid of malware and such, and I got Malwarebytes, SpyBot - search&destroy, and finally Avast! computer antivirus. After running scans with malwarebytes and Spybot, removing all the trojans and programs that were affected, I used ccleaner to clean the registry. Although I did all that, it seems like there is still something in my computer because spybot keeps scanning the same files over and over, and both Malwarebytes and Avast! keep saying that a malware threat had been stopped, while showing a URL that I never even connected to. Sometimes it even happends when internet explorer is off. what I really want to do is to restore my PC to the factory settings and start with a fresh NEW system. I'll make sure to get AVAST right away to insure security. As for backing up files, I'm afraid that the virus would somehow be in certain files and infect my computer again. Nothing really important that I'd lose. So I don't really mind so much to do a full factory reset.
View 9 Replies View Relatedmy 5 month old computer would no longer boot, it automatically ran start up repair, after about 6 hours said could not repair, took me to restore, but then said couldn't restore due to I/O error, tried recovery option with data back up with disks but get fail due to I/O error, tried again on the complete factory restore and got error of not enough memory to complete. can I recover my system?
View 9 Replies View RelatedI decided to recover the windows and I haven't made the recovery disc yet, so I will recover from from windows directly from hp recovery systemI just want to know how many times can I use this option for later?
View 3 Replies View RelatedI do not know how or why but some files that I have been using were just gone when I went to find them. The files where in a word document with other files which are still there.
View 3 Replies View RelatedI have a Gateway T-1625 laptop. it has 2 gb of ram, 500 gb hdd, and an amd turion 64x2 processor. It came with win vista and am trying to upgrade to win7. I ran the disk, everything seemed to go fine, all the way up to setting the time and date. After the restart, it goes to "System Recovery Options" and asks for language. Next screen says "select an operating system to repair and click next. Only win vista operating systems are listed and can be repaired". My problem now is only win7 is listed. My options are to load drivers or next. I have read in a few places to load drivers, but i read them after trying to install win 7. I don't know where to look for drivers if that might be the case. If i click next, i get the "choose a recovery tool" and it states the operating system is win7 located on (C Local Disk. I have tried the startup recovery several times to no avail. When i look at the details, there are 10 problem signatures. The ones that look odd to me are the "Signature 1 SystemDisk" and "Signature 6 OsVersionMismatch". Like most idiots, i thought i could handle a simple installation and didn't bother to look for tips before hand, and now it's costing me.
View 14 Replies View RelatedI am attempting to run a complete system recovery (factory restore) on Windows 7 using a recovery partition. Last time I ran the recovery, I ended up having a lot of problems with system programs not being installed correctly, and with the system administrator account. Now, when I reboot and use the F8 option to bring up the boot options, I do not have an option to "Repair your computer" as I had before. I also tried rstrui.exe through the command prompt, but it only tells me that "No restore points have been created on your computer's drive. To create a restore point open System Protection."
I also checked my drives through DISKPART to make sure there were no problems with the recovery partition, but it is showing up normal. On the Windows knowledge database it said that if the system recovery options are missing, then the system is not installed with the options or they were disabled by the network administrator. Given that I had no problems accessing these the last time I ran the recovery, I'm assuming something happened with the account. I am set up with 1 user in the system, which is the administrator.
1) Re-enabling the options so that I can access the "Repair your computer" options on the boot menu.
2) Run the system recovery options without having to get into the bootup menu.
if my operating system like xp or win 7 is corrupted/damaged which it can't be started to get/recover my files what software should i use
View 4 Replies View RelatedI attempt to do a system restore from several dates, keep getting recoveryunsuccessfull, what do I try next ?
View 2 Replies View RelatedHonestly don't know y I deleted it but, I was cleaning files from my drives while in Linux and I deleted the system volume folder from one of my hdds and now all my data is inaccessible. Haven't touched the drive since, would like a surefire way to get it back. Here is my set up64gb ssd Windows 7 1tb hdd internal (deleted system volume folder) 1tb external hdd 50gb Linux partition 950gb ntfs partition
View 2 Replies View Relatedmy son wiped out my operating system on my gatewaylaptop, can u help to get it back
View 2 Replies View RelatedI am familiar with System Restore, selecting earlier times, and the often-available option of undoing a System Restore. But I found out (too late) that according to Microsoft, System Restore done in Safe Mode is not able to be undone.I lost 1,000's of photos doing the system restore, now the only restore point option visible is what I believe to be the new one after I did the restore. Prior to me doing the System Restore, there were a number of times from me to choose from, I just chose one that was 10 days ago. Is there any software, method, or hack that I can use or do to recover the thousands of photos that were on my desktop and that were in folders on my desktop? It's a 1 TB HD?
View 1 Replies View RelatedI have my HP Laptop which came with Windows Vista as the OS. I want to upgrade to Windows 7 so I bought Windows 7 from my local store.I entered the disc and did boot from CD. It reached to the page where it shows the disk partition. I deleted the partitions and created new one. However, whenever I create the partition, it creates a primary one and gives me error saying Setup was unable to create a new system partition or locate an existing system partition.
View 9 Replies View RelatedI accidentally deleted the system variable PATH in environmental variable while setting path for java programs.How can I recover my path? What am I supposed to do now?
View 1 Replies View RelatedI have made a reformat on my hdd to install Win 7. But during install this message comes" Setup was unable to create a new system partiton or locate an exsisting system partiton" And if I start my computer without a DVD this message comes in the end "BOOTMGR IS MISSING"
View 1 Replies View RelatedI recently reorganized my computer and this included a fresh install of Windows 7 on a new disk. I backed up all my data on the old disk so that I could make sure I wasn't losing any important documents or whatever.I'm now sure I've got everything off the disk that I needed and am using the disk as a storage disk for media. However, there are still folders that I can't seem to erase in the Program Files, Program Files (x86), and Windows directories. Most of the files are gone but about 12GB of junk remains that I no longer need. Whenever I try to delete what is left, it says I need permission from TrustedInstaller and it won't let me delete these files.Is there any way to blow these directories away without having to format the disk? I really can't format because the disk is almost full with data that I need to keep and I don't really have any other disks to temporarily back these files up to.
View 6 Replies View RelatedI have a copy of windows 7 from a friend. (USB, possibly enterprise)It runs well, is official and can be re installed and is verified through the Microsoft site, so the media doesn't seem to be a problem.I was able to install Win7 Ult x64 on my WinVista HomePrem x86, but I went back through to clean the hard drive (it was full, I didn't format before) and after low level formatting I cannot reinstall the OS. The harddrives are completely empty, and I get stuck at "Setup was unable to create a new system partition or locate an existing system partition," after hitting next when you are selecting the HD partition to install on. I tried a couple of things already:
-Installing on another harddrive
-Formatting using Hiren's bootcd
-Using a hard drive with XP installed to see if it is an upgrade and not a full version (no luck, still wouldn't install)
-diskpart > list disk > select disk 0 > list partition > active \ in cmd..I have three hard drives attached to the computer right now, they can't all be broken. T.T
Well, unfortunately, I�m having the same problem of PaulyC."show more restore points dates" IS checked but it does not show anything before 16 december, TWO days ago.
View 3 Replies View RelatedI'm having a problem I cannot seem to fix at all. I'll provide the backstory and what steps I've tried to take to resolve the problem, but I'm literally at a place where I don't know what to do. My ultimate end goal is to just recover personal files from my old hard drive and that's it. I don't care how I access that drive, I just need to access it. The problem is I can't no matter how hard I try.
So a week ago I was having problems with my computer. Lots of blue screen errors (unfortunately I don't have those numbers anymore) and even after try to do chkdsk, running repair programs, defragging, etc., nothing seemed to help. I had a 1TB HDD partitioned into two sections. I backed up my personal files to the second partition (the one without Windows) and then tried to do a repair of the Windows installation. That didn't help, so I just wiped that first partition and did a fresh install of Windows. Everything seemed to be working great, no errors, no BSOD, nothing. So I moved back my personal files to the partition with windows on it (my second partition is where I hold all my games) and called it a night after I had gotten everything back to normal.
The next day my computer is on and it suddenly just turns itself off. When I restarted it I got a blue screen error that flashed on my screen and immediately rebooted the computer. When it tried the second time I got another BSOD, this one giving me the error of 0x00000024. I tried booting last known good config, safe mode, disk repair... seems no options can get me back into Windows.
I am facing a troublesome problem.I am not able to shut down my system after use.whnever i click on the shut down option it remains idle. BUT WHEN i switched off d power option D system goes off and again when i switched it on there is no rebooting and directly desktop appears.
View 1 Replies View RelatedRecently my SSD failed so I tried installing windows 7 from DVD on my HDD but I always get an error message: "Setup was unable to create a new system partition or locate an existing system partition."I've tried everything I could find here: I gave boot priority to the HDD, I unplugged every other device but nothing seems to work.
View 4 Replies View RelatedI have just performed a full system restore on my Dell XPS L501 with Windows 7, but now it won't boot up. I get a 'Bootmgr is missing' message. I think I might have to try re-installing Windows but did not receive a disk with the PC. Anything else I should try?
View 1 Replies View Related"unable to defragment system partition. When run Disk Defragmenter the C: volume is not displayed. Other partitions can be defragmented and are displayed."
View 2 Replies View RelatedSo to give an idea of whats going on: D: Drive is where Vista USED to be. C: Is where I put 7. E: Is a small drive I dropped in for XP.
Now that 7 is on C: I have no real use for Vista and want to format D: for storage of all non-system files. However its not letting me delete all the files (it shows about 50+ GB os files in D:Program Files and D:Windows from the old installation) OR Format the drive because it treats is as a system drive. Any way around this?
I have Win 7 64 bit installed on my laptop as well as my desktop. System images for both are on external HD's.
On the laptop, I have created a system image on blank DVD's using DVD-R's. No problems -- I can restore from the DVD's.
However, when I try to create a system image on blank DVD-R's on my desktop, I get a message saying something like, "format was unsuccessful." If I use a DVD+RW the process runs to completion and I can restore from it. I had to use RW's because I don't have and +R's.
I get the same unsuccessful message if I try to format a blank DVD-R with Win 7.
My DVD burner on the desktop says it is a +R. Does that mean I can't use -R's.
I've no idea whether this is a Win 7 problem, burner problem or a problem on my part.
Would someone please try to straighten out the dense old mind?
I managed to figure out that I have to use the VCenter Converter Standalone itself separately to get it to work out better. I am currently able to boot my VM, but my files are corrupted so it sends me to a restore method. I attempted to restore from my external HD and it seemed to work, but then it gave me an error. Obviously it has something to do with the error i got at around 98% while converting.This is on the left side of the box.
View 5 Replies View RelatedI recently put together my first build and am currently trying to install Windows 7 onto it.
My school offers Windows OS for free so I downloaded a .iso file of Windows 7 Professional 64-bit onto a USB drive.it starts up just fine, leads me to install Windows, agree to terms, but when I go to set up the drive it gives me the message, "Setup was unable to create a new system partition or locate an existing system partition. See the Setup log files for more information."
System Info Utility version 1.0.0.2
OS Version: Microsoft Windows 7 Home Premium, Service Pack 1, 64 bit
Processor: AMD A4-3300 APU with Radeon(tm) HD Graphics, AMD64 Family 18 Model 1 Stepping 0
Processor Count: 2
RAM: 3575 Mb
Graphics Card: AMD Radeon HD 6410D, 512 Mb
Hard Drives: C: Total - 466936 MB, Free - 259482 MB; D: Total - 305242 MB, Free - 137596 MB;
Motherboard: Foxconn, A75M
Antivirus: Kaspersky Internet Security, Updated and Enabled
I recently did a Clean install of WIN 7 from scratch (after reloading the manufacturers settings), download Microsoft Updates and Kaspersky 2013. However I am unable to restore from my backup Drive (D), Win accepts the command and identifies the File/s to be restored, yet on completion the files do not appear to have been restored after a restart.
I'm doing a fresh install on windows 7, instead of a disk it's on a thumb drive
I have a 500 GB Partition I want to install windows toI went through setup and formatted the disk when I try to continue with the installation and get this error.
