Recover Set Path Environment Variable System Variable?

Dec 23, 2012

I accidentally deleted the system variable PATH in environmental variable while setting path for java programs.How can I recover my path? What am I supposed to do now?

View 1 Replies


ADVERTISEMENT

How To Retrieve Windows 7 Path Environment Variable

May 23, 2012

how to retrieve the user variable deleted in windows 7?

View 1 Replies View Related

Command To Change The Path Using Environment Variable From Command Prompt?

Jun 9, 2012

In UNIX, for changing the directory path, there is "cd" command. .This works fine in windows 7 too.. But the problem comes when we are trying to change the path using environment variables. .

In UNIX, cd $JAVA_HOME changes the path to the value set for JAVA_HOME,

Similarly is there any command in Windows which does the trick from command prompt for changing path using Environment variables. .

View 1 Replies View Related

Path System Variable Default Windows 7?

May 21, 2012

I have acer 3830TG laptop.I have deleted my path variable accidentally .Now I repair it by default path variableBUT what about my priveous original path ?Is my syatem works as previous ?what about graphics path,bluetooth etc

View 2 Replies View Related

What To Put In The System Variable PATH For Java Commands

Jan 21, 2013

I want to set up a server using java on my new computer that I built, but my computer doesn't recognize any Java commands even though I re-installed it twice. SO I looked at Java's tutorial, but they did not mention the location of the class or were to find the location of the class. I

View 12 Replies View Related

Default System Variable Path In Windows 7 64 Bit In Sony Vaiovpcea15fg?

Sep 23, 2011

accidentally deleted the default system variable path in windows 7 64 bit in sony vaio vpcea15fg.....find me a sol...

View 1 Replies View Related

Deleted PATH Variable?

Dec 23, 2011

I have a inspiron zino HD windows 7 and i lost my path variable.

View 1 Replies View Related

Accidentally Deleted PATH Variable?

Nov 6, 2009

I was trying to edit my PATH environment variable and accidentally deleted it. Is there any way to recover it? If not, is there anyone out there who can tell me what the default path variable should be? I'm afraid to turn off my computer without fixing this as I'm not sure if it will be able to boot up again.

View 7 Replies View Related

Path Variable For Installing Dig Instead OF Using NSLookup?

Dec 12, 2011

Just wondering if anyone can tell me if it is OK to have (create) asecond PATH environment variable for Dig.I currently have 1 PATH variable already being c:Program Files (x86)Nmap.In the instructions for installing Dig found here dig, a DNS query tool for Windows and replacement for nslookup it says that if the PATH variable exists to double click it for editing and to append dig to the PATH variable.

View 3 Replies View Related

Accidentally Deleted PATH Variable

Nov 6, 2009

I was trying to edit my PATH environment variable and accidentally deleted it. Is there any way to recover it? If not, is there anyone out there who can tell me what the default path variable should be? I'm afraid to turn off my computer without fixing this as I'm not sure if it will be able to boot up again.

View 5 Replies View Related

Deleted Environmental Variable - Replace The File Path?

Dec 28, 2012

I deleted it and put in C:Program FilesJavajdk1.7.0_10in; I have been having problems. I have a Windows 7 64-bit machine, and need to replace the file path.

View 1 Replies View Related

Accidentally Deleted CLASSPATH System Variable For 32bit

Feb 12, 2011

Accidentally Deleted CLASSPATH system variable for 32bit

View 2 Replies View Related

Set Permanent Variable In Cmd?

Jul 18, 2012

I am trying to find a way to set a variable in the cmd that is "permanent".What I mean is that I could set the variable %message% to "hello", and I could close the cmd, open it up a week later and if I typed this: Code: echo %message% This would be the result Code: hello Using the normal SET command will only set the variable for the time the cmd is open. I need to set the variable within the system so that it will stay if I close the cmd.

View 2 Replies View Related

How To Select Multiple Values For Variable

Mar 16, 2012

I have a set of strings like word1,word2,word3 and I have use these strings one by one.I am using variable option in DOS batch file. I have to use word1 as variable value and word2 as variable second time and word3 third time.

View 1 Replies View Related

Batch File Command Output To Variable

Nov 9, 2011

Im setting up a batch file to run some adb commands on my android phone. I want to run a command and store the result into a variable for later use in the batch file.

Example command:
adb shell getprop ro.product.brand

That command outputs the brand of the device e.g. samsung. I want to capture that without displaying it into a variable that will be used later on in the script. I have the 3 adb files coped over to the scripts location so that it will run natively.

View 5 Replies View Related

Variable To Bad Playback Audio Quality In Windows 7 Live Movie Maker?

Aug 9, 2012

What is going wrong after soundtrack or music has been added and the clip saved?requently music playback in the files converted from a number of formats ( obv. to wmv) is dodgy, choppy or simply not capable of being listened to. Obviously I am at fault. What is being done incorrectly> Windows 7 ultimate 32 bit (warranted no emoticons)

View 3 Replies View Related

64-bit Not Running Batch Files/Path Environment?

May 17, 2011

I recently got a new laptop running Win 7 Pro 64-bit and as part of my initial third-party software installations I inadvertently overwrote the 'Path' environment variable (instead of appending to it). I subsequently tried adding c:windowssystem32; to it but don't know if this is doing anything. I have not managed to find any definitive information on what the Path ev should be on a new Windows 7 64-bit install.The thing is I loaded a batch process which I had on another Win 7 (32-bit) system but when I key the bat filename in cmd.exe (without the extension or double-click it) I get this error:"The syntax of the command is incorrect."If I key the bat filename with the extension, it runs but then stops because it seems not to recognize another program which the bat file calls even though I have the Path ev set for that program.

View 2 Replies View Related

How To Get Original Windows Vista Environment Variables Path

Dec 20, 2011

I deleted by mistake the environment variable in path, in vista 32 bit. I was adding this ""CProgram FilesJavain";". Could anybody tell me the original settings please.

View 5 Replies View Related

System Could Not Find Entered Environment Option

May 8, 2011

I think I have some kind of malware. I am unable to use many functions on my computer, I always get the same error message "C:windowssystem32 strui.exe. The system could not find the environment option that was entered." I can't open system restore, because I get that same error message. I think its any .exe operations that I cannot use. My malware program won't open normally but when I tried it in safe mode, it didnt find any problems.

I also tried system restore in safe mode and from the boot screen, and it told me system protection was turned off, so I tried to turn it back on and the security tab that was needed to do this was missing. I don't have the windows 7 install disc because it was a factory install. I can't install any new programs and now I keep getting error messages saying I may have counterfeit software. In the bottom right corner of the desktop it says "Windows 7 Build 7600 This copy of Windows is not genuine".

View 9 Replies View Related

"The System Could Not Find The Environment Option That Was Entered"

Sep 17, 2012

The problem started while playing a game, causing a BSOD. After a restart, I noticed some of my programs just didn't boot up, for example Core Temp. I attempted to manually start Core Temp and received the following error: "The system could not find the environment option that was entered."That problem lead me here: The system could not find the environment option that was entered. - Microsoft Answers Which, obviously, did nothing for me. I tried to create a new user, but when I click the link in the control panel to do so, nothing happens. I then tried to repair my windows installation using my disc, and it said it could not find any problems. After searching some more, I found another solution would be to perform an upgrade to my Windows installation to fix the problems.

I put the disc in, nothing happened so I went to the setup.exe directly and got the same error as above. So I then booted in safe mode, and it loaded. I got excited until it said something like "an error prevented a compliance check from completing"And just to be very clear, my windows 7 is valid, I'd be more than happy to share an image of my newegg receipt or even my box to get that out of the way, as I've seen a lot of flaming towards people who have issues regarding validity. Well that brought me to a thread on this website where someone said to open an elevated command prompt and run sfc /scannow. I tried doing that and got this error: "This file does not have a program associated with it for performing this action. Please install a program, or, if one is already installed create an association in the default programs control panel."

View 7 Replies View Related

Windows 7 - System Cannot Find Path Specified When Installing Programs

Oct 1, 2011

after i reinstall windows 7 ultimate i try to install Internet music downloader and it says: the system cannot find path specified, i try to run as administrator but it doesn't works. i open troubleshoot compatibility and it says: incompatible application. i am using 64 bit windows 7 and i get this error on every program i want to install.

View 2 Replies View Related

TeraCopy Open Error - System Cannot Find Path Specified

Aug 20, 2012

I'd like to use Teracopy for all copying etc. But after moving to 7 from xp it's giving me these errors. I have Win 7 Pro 64-bit. I copy from network drive for which I have read and write permissions as windows' own copy works fine. But with teracopy I immediately get error "Open error: The system cannot find the path specified". I'm trying to copy, not move, a folder with several subfolders from a network drive into local C:. I have administrator privileges. It seems that Teracopy somehow doesn't have even read permission for the network drive. Taking ownership of the network drive (samba share) is not possible.

View 5 Replies View Related

Unable To Recover System?

Dec 28, 2012

I can not start windows 7, and i try to restore to an earlier point in time, and it says i've not enough free space in C:. I tried using command Prompt to delete files from C, but it looks stuck in X:. I entered x:>cd "C:" and it says C: and after X:>

View 2 Replies View Related

How To Recover System To Factory Settings

Sep 10, 2011

Recently I was attacked with malware and I had no internet security. It messed up some programs, changed the description of processes etc. I read up on how to get rid of malware and such, and I got Malwarebytes, SpyBot - search&destroy, and finally Avast! computer antivirus. After running scans with malwarebytes and Spybot, removing all the trojans and programs that were affected, I used ccleaner to clean the registry. Although I did all that, it seems like there is still something in my computer because spybot keeps scanning the same files over and over, and both Malwarebytes and Avast! keep saying that a malware threat had been stopped, while showing a URL that I never even connected to. Sometimes it even happends when internet explorer is off. what I really want to do is to restore my PC to the factory settings and start with a fresh NEW system. I'll make sure to get AVAST right away to insure security. As for backing up files, I'm afraid that the virus would somehow be in certain files and infect my computer again. Nothing really important that I'd lose. So I don't really mind so much to do a full factory reset.

View 9 Replies View Related

Cannot Recover System With Recovery Disks

Apr 18, 2012

my 5 month old computer would no longer boot, it automatically ran start up repair, after about 6 hours said could not repair, took me to restore, but then said couldn't restore due to I/O error, tried recovery option with data back up with disks but get fail due to I/O error, tried again on the complete factory restore and got error of not enough memory to complete. can I recover my system?

View 9 Replies View Related

Recover Windows 7 From Hp Recovery System?

Aug 1, 2012

I decided to recover the windows and I haven't made the recovery disc yet, so I will recover from from windows directly from hp recovery systemI just want to know how many times can I use this option for later?

View 3 Replies View Related

How To Recover All Files And Pictures After A System Recovery?

Jan 31, 2013

I do not know how or why but some files that I have been using were just gone when I went to find them. The files where in a word document with other files which are still there.

View 3 Replies View Related

Fresh Install Of Windows 7 Always Goes To System Recover Options?

Nov 3, 2011

I have a Gateway T-1625 laptop. it has 2 gb of ram, 500 gb hdd, and an amd turion 64x2 processor. It came with win vista and am trying to upgrade to win7. I ran the disk, everything seemed to go fine, all the way up to setting the time and date. After the restart, it goes to "System Recovery Options" and asks for language. Next screen says "select an operating system to repair and click next. Only win vista operating systems are listed and can be repaired". My problem now is only win7 is listed. My options are to load drivers or next. I have read in a few places to load drivers, but i read them after trying to install win 7. I don't know where to look for drivers if that might be the case. If i click next, i get the "choose a recovery tool" and it states the operating system is win7 located on (C Local Disk. I have tried the startup recovery several times to no avail. When i look at the details, there are 10 problem signatures. The ones that look odd to me are the "Signature 1 SystemDisk" and "Signature 6 OsVersionMismatch". Like most idiots, i thought i could handle a simple installation and didn't bother to look for tips before hand, and now it's costing me.

View 14 Replies View Related

Windows 7 System Recover - Repair Option Missing

Feb 25, 2011

I am attempting to run a complete system recovery (factory restore) on Windows 7 using a recovery partition. Last time I ran the recovery, I ended up having a lot of problems with system programs not being installed correctly, and with the system administrator account. Now, when I reboot and use the F8 option to bring up the boot options, I do not have an option to "Repair your computer" as I had before. I also tried rstrui.exe through the command prompt, but it only tells me that "No restore points have been created on your computer's drive. To create a restore point open System Protection."

I also checked my drives through DISKPART to make sure there were no problems with the recovery partition, but it is showing up normal. On the Windows knowledge database it said that if the system recovery options are missing, then the system is not installed with the options or they were disabled by the network administrator. Given that I had no problems accessing these the last time I ran the recovery, I'm assuming something happened with the account. I am set up with 1 user in the system, which is the administrator.

1) Re-enabling the options so that I can access the "Repair your computer" options on the boot menu.

2) Run the system recovery options without having to get into the bootup menu.

View 14 Replies View Related

Recover Data/files If Operating System Is Corrupted?

Aug 11, 2012

if my operating system like xp or win 7 is corrupted/damaged which it can't be started to get/recover my files what software should i use

View 4 Replies View Related

Dell Laptop Wont Recover In System Restore?

Oct 17, 2012

I attempt to do a system restore from several dates, keep getting recoveryunsuccessfull, what do I try next ?

View 2 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved