So to give an idea of whats going on: D: Drive is where Vista USED to be. C: Is where I put 7. E: Is a small drive I dropped in for XP.
Now that 7 is on C: I have no real use for Vista and want to format D: for storage of all non-system files. However its not letting me delete all the files (it shows about 50+ GB os files in D:Program Files and D:Windows from the old installation) OR Format the drive because it treats is as a system drive. Any way around this?
how i can format my pen drive if window 7 and XP is unable to format it. they are saying files are in use. i have kept window xp, photoshop and some other software in it. Now please tell me how can i delete these items or format it.
I recently reorganized my computer and this included a fresh install of Windows 7 on a new disk. I backed up all my data on the old disk so that I could make sure I wasn't losing any important documents or whatever.I'm now sure I've got everything off the disk that I needed and am using the disk as a storage disk for media. However, there are still folders that I can't seem to erase in the Program Files, Program Files (x86), and Windows directories. Most of the files are gone but about 12GB of junk remains that I no longer need. Whenever I try to delete what is left, it says I need permission from TrustedInstaller and it won't let me delete these files.Is there any way to blow these directories away without having to format the disk? I really can't format because the disk is almost full with data that I need to keep and I don't really have any other disks to temporarily back these files up to.
I have a dell 1545 inspiron and I am trying to format all the drives and do a clean install of vista until I get windows 7 pretty soon. I am doing a clean install because I found a rootkit (gecko-crash) when I ran a housecall online scan. I was able to format the F drive which was vista recovery drive. But D is a system drive and contains some system files, some of which I don't recognize and one folder is titled 'Boot'. I can copy other files to D(which means viruses can copy themselves to it) and I have to format it because it might be infected as well but can't be formatted.. I keep getting 'can't format D system drive' messages.Btw I have ran spyware doctor scan, online house-call scan and nothing has showed up. But the system was kinda slow and I have to do a clean install now.
i have laptop reinstalled with windows 7, it doesnt work properly, cos ram is 1GB only, i want to reinstall windows xp now, but it does not allow me to do that. message comes that newer version is installed on this machine and it is not letting me to install windows xp.
It's time to format my hard drive. It hasn't been formatted since 2008 when it was bought and it's having some major issues.I made a system image. when i was installing it, I couldn't check the option to "get rid of the partitions and format the hd". It requested the drivers, asked me to insert the disc, but I don't have any disc with the drivers
So I bought a used 2 TB Hard drive and it supposedly was only used a couple of times and I got a good deal.I plugged it in and the software was installed successfully but it doesn't show up in the explorer with a drive letter. Now when I go to the device manager it does show up but I am not able to format it or give it a letter etc. Also like I said in the title it doesn't have a fat32 or NTFS File System.The hard drive I right clicked is the one I am talking about.
Hard drive in 2009 Satellite P500 series notebook, Windows 7 Home Premium X64, is pre-Advanced Format Drive. The 2008, 500 GB Hard drive failed with SMART warning at every boot. (Pre-Advanced Format Drive) Replace with new 500 GB HDD (AFD) Advanced format. Repair with Toshiba supplied 3 Disc set "Recovery Media Satellite P500 series"... Boot okay, no network, Device Mgr shows 6 yellow exclamation marks, but properties all show "The device is working properly". Download latest drivers and install... no change in symptoms. Scrounge up another 2008 (320 GB) Hard drive, and the Recovery Media installs fine. System boots and everything is working great.Image Backup with three different programs, (PQ Drive Image (GHOST), Acronis, Active@Disk Image)Restore to new 500 GB (AFD) hard drive Continue to configure and customize system, and install all the latest updates. Install again, the new AFD hard drive into computer. Machine seems okay.. Use it for a couple days. Discover that Windows Update does not work. Says service is not running. but it is. I spent most of a day trying to resolve. can't fix it. Download an install a stand-alone fix does not work either.
Can I format a Hard Drive with Windows 7 using a 2000 format disk. If so, what are the prompts i see and action on boot-up before I use the format C. Done it before but just forgot
I recently turned my usb into bootable usb in order to run chrome os,everything was ok untill i needed my usb to transfer some files so when i plugged it in while running windows 7 a box popped up to format it i clicked ok,then i noticed the usb from 8 giga showed up as 1 giga in my computer.I opened disk management and saw that it was cutted down in many partitions, i deleted some of them so i would expand it in one partition,at that point my trouble began,the expand option was greyed out,i tried diskpart and delete the partitions there.After that the drive lost its assign letter and showed up as one partition in disk management but in my computer it was invisible,i tried other guides that use diskpart and i download some programs to fix this with no luck.when i tried to format or assign letter from disk management i get this message "the system cannot find the file specified usb format".I tried to plug the usb in my roomates laptop with the same resaults so i dont think its my drivers or laptop problem.
I'll warn up front that this is a duplicate of another forum entry, but although that other entry is now closed, the solution was never postedI recently turned my 8GB Sandisk usb into bootable usb in order to run chrome os,everything was ok untill i needed my usb to transfer some files so when i plugged it in while running windows 7 a box popped up to format it i clicked ok,then i noticed the usb from 8 GB showed up as 1 GB in my computer.I opened disk management and saw that it was cut into many partitions, i deleted some of them so i would expand it in one partition,at that point my trouble began,the expand option was greyed out,i tried diskpart and delete the partitions there.After that the drive lost its assign letter and showed up as one partition in disk management but in my computer it was invisible,i tried other guides that use diskpart.when i try to format or assign letter from disk management i get this message "the system cannot find the file specified usb format".
I found some disks in my room with old music burned on them so i decided to format it so i can put new stuff on it. When i click for mat its goes for like 3 seconds and says "Unable to format disk".
I've gotten a copy of Windows 7 prof last year and it had worked perfectly. Recently I've decided to give my hdd a format, and when I tried to install Windows 7, I got to the welcome screen, asking me for a user and pw log.
I have never set any password on this computer before the format, and have never set any administrator password at all! I used to switch on the computer, and let it boot all the way to my desktop without needing to key in anything.
I bought two new Western Digital AV-GP WD3200AUDX drives. They're advanced format drives designed for audio-video editing folks, but essentially they're just a bit better than any standard SATA drive (per reviews I've read).
My Config: Windows 7 Home Premium 64 Asus P6T Deluxe V2 2x WD AV-GP drives (320GB each, RAID0)
I would install them into a RAID0 (striping) configuration and then install Win7 Home Premium 64. The problem is that if I enable RAID in the BIOS, windows WILL NOT recognize these drives and thus I can't install to them. I saw that there's a problem with earlier versions of Intel RST and that you can either download new drivers or upgrade to Win7 SP1 which includes the fix.[URL]
Problem: I can't install, so I can't use the new drivers. The driver disk they have available for installation is (a) meant for XP and such, not Win7... and (b) doesn't work anyhow.Another Problem: I installed Win7 to a separate drive in IDE mode and upgraded to SP1, but now Windows has a boot loop and windows startup repair is telling me SP1 is the issue. The theory here was that I would get SP1 up and running with the drivers, then tell Windows to do an upgrade/clean install over to the new RAID drive (which it would hopefully recognize now) and download updates prior to the installation, thus enabling it to work during install.The only thing I can try doing (that I haven't yet) is updating the BIOS, but none of the newer updates mention anything about drives or storage compability, so I don't think it'll have any effect.
I have bought a new laptop (DOS installed) and trying to install windows7 After i installed windows 7, i can see only 30 gb drive in "My computer" (500 gb hard disk) When iam trying to create new volume in disk management on unallocated space iam getting a prompt that "this action will convert the disk to dynamic disk" when i proceeded with clicking ok i get an error message saying "Not enough space on the disk to perform the operation" Even in the windows installation screen iam unable to select the unallocated space and format. I can see the options "format", "delete" disabled for the partitions I can see the options enabled for only few partitions. This is a brand new laptop with DOS installed and iam installing the windows for first time.how can i partition the hard disk and format?
I recently upgrade my entire computer, with it i brought a 2TB WD HDD. I set everything up, installed Windows 7 and updated all my drivers/etc.
I then moved my old 3x 1TB drives over, in it, one partition had my old Windows 7, I am unable to format/delete windows folder/program files. One HDD had my old Vista partition, same story..i can't format/delete.
What i basically want to do is, take those 3 drives, format and re-set them into 1TB 1 Parition drives. Now i have 1.6TB space left on my 2TB drive, so i can put one entire drive over and format the old, repartition to 1...
How can i get about this? I don't understand why the boot system will have problems because when i installed Windows 7 it had no other drives to see..
I have a new computer, Dell Inspiron 580 Windows 7 64-bit. I was trying the "Format" option in Windows Explorer and got the following message: : Windows was unable to complete the format." I had a DVD R/W disc in the drive.
I have bought a new laptop (DOS installed) and trying to install windows7After i installed windows 7, i can see only 30 gb drive in "My computer" (500 gb hard disk)When iam trying to create new volume in disk management on unallocated spaceiam getting a prompt that "this action will convert the disk to dynamic disk"when i proceeded with clicking ok i get an error message saying "Not enough space on the disk to perform the operation"Even in the windows installation screen iam unable to select the unallocated space and format.I can see the options "format", "delete" disabled for the partitionsI can see the options enabled for only few partitions.This is a brand new laptop with DOS installed and iam installing the windows for first time.
I have created drives and installed fresh version of windows 7. I made 4 drives. I was not able to format one of these drive. When I gave format option a message displays "Windows was unable to complete format". Is it hard disk problem .
im having this prob where a total of 40GB of space out of 160Gb in my HD cant be formatted. I were using Windows Vista before upgrading it into Win 7....
I had 3 partitions ( c:, d:, & N... All 3 of it works perfectly. The only problem im facing here is with this 40GB of free space which i couldn't Format in anyway.. it keeps on bugging me with this warning of "not enough space to complete operation" thingy...
Here is an image of it, where the green colored free space (39.06Gb)... cant be formatted.
I tried Formatting it while the Windows 7 installation process, yet, i still couldn't do anything.