Unable To Find A Single Resolution That Will Provide A Good Display On All Websites
Nov 1, 2011
I am unable to find a single resolution that will provide a good display on all websites. As a result I am adjusting it when moving from one site to another. Not difficult to do, but if I could rid myself of this chore, it would be great. Problems are wrong screen size and garbled text.WIN 7 premium, 64 bit, using 32 bit IE9 due to the lack of a flash player that will work on 64 bit IE9.
View 4 Replies
ADVERTISEMENT
Apr 2, 2012
as the title of my thread suggests i am not getting the display using single link dvi d cable. presently, i am using dvi to vga converter to get the display. i have HP 2009f monitor and it has dvi input.
when i connect my system with dvi d single link cable i am not getting any display and the monitor after scanning for the display signal, finds no signal and goes to sleep.
i was wondering, is there anything to be done in bios? i have onboard graphics on i7 2600 and am using dh67bl as my motherboard.
View 4 Replies
View Related
May 1, 2012
I am not able to open any websites other than Gmail ??
View 2 Replies
View Related
Jul 29, 2011
belkin router unable to connect to certain web sites by hard wire,but can access through the wireless side with the same computer with windows 7 and firefox or internet explorer
View 2 Replies
View Related
May 3, 2011
I am using Windows 7 Ultimate and I also have IE 9. I go to news websites and I am unble to view the video feeds from their websites. Is this possibly an intenet option setting that I need to adjust?
View 3 Replies
View Related
Jan 23, 2012
unable to get into genesreunited websites and links from emails/
View 1 Replies
View Related
Apr 16, 2012
I have been downloading pictures to Facebook, Walgreens, and Shutterfly for 3 years with no problems. All of a sudden I can not upload any pictures! I had no difficulties downloading them from my memory card to my computer and I can view them just fine. When I go to upload them it will let me select the pictures I want and start the process, but then just keep "loading" or "thinking" for hours if I would let it. It will not upload even one photo.
View 7 Replies
View Related
Mar 17, 2012
My resolution is 640x480. How I increase resolution of my display?
View 1 Replies
View Related
Jan 11, 2013
Can't get monitor to display same resolution between 2 workspaces - Microsoft Community Copy/paste of text in OP (posted Nov 21, 2012): Ok, so here's my setup:HP EliteBook 6930p with ATI Radeon HD 3450 graphics card. Win 7 Pro 32 bit installed.I have 2 workspaces, both with docking stations.Workspace 1 (primary work site) had 24" wide (primary monitor) and 19" wide monitors.Resolutions that Windows let me set were 1920x1080 and 1440x900, respectively. These monitors were also hooked to the docking station via DVI and VGA cables, respectively.Workspace 2 had a 19" standard monitor (1280x1024, VGA, set as primary) and then I would open the laptop beside it for the dual monitor (1280x800).Today I have pulled the 19" wide from workspace 1 to replace the 19" standard at workspace 2. Windows, however, will only let me set the resolution to 1280x720 (still using VGA). Even taking off the "hide modes" option or going into the ATI Catalyst Control center to try and force it does not work. I've also tried switching between which one is primary or even making it single monitor display (on the 19" wide). 1440x900 is simply not available.
View 9 Replies
View Related
Oct 29, 2009
Windows 7 installed without any problems, and found all the hardware devices, but the only problem I have is that the monitor will only dislplay at 1920x1080. If you lower it , the monitor will not display a full screen. Tried all resolutions, and have the latest 191 drivers. Any ideas..
View 2 Replies
View Related
Aug 1, 2012
I have a Toshiba LED TV that I use as a secondary display. Up until today, it worked fine at 1920x1080. Now for some reason Windows is detecting it as a generic UPNP display and it it only let's me set it up to 1600x900. I have tried installing updates and drivers, but I cannot fix it.
View 2 Replies
View Related
Mar 9, 2010
How to Change the Screen Resolution in Windows 7 ?
View 0 Replies
View Related
Sep 6, 2011
After installing Windows 7 on Gateway W340UI, the display resolution is decrease till 1024x768. And it hurts eyes and makes less comfortable work on laptop.
I suppose that the package drivers of Windows 7 are not compatible with Gateway W340UI. If you know the way of increasing screen resolution
View 4 Replies
View Related
Aug 10, 2009
I have a dual head setup that works ok. My issue though is that whenever I do a reboot, I have to go into display resolution settings and re-enable "extend" displays.
Is there a way to make this persistent? It's just annoying doing a reboot and having to spend time re-organizing your desktop every time.
View 3 Replies
View Related
Nov 22, 2010
I used to use a MBP as my main computer, coupled with a 30" Apple Cinema Display (Model A1083 - purchased three years ago). I recently purchased a PC (i7-950 3.06 GHz; AMD Radeon HD 6850 1GB; Windows 7 Home Premium 64-bit) to use as my home computer, and the MBP for mobile purposes. However, I cannot get the new PC to recognize the native resolution of the Apple Cinema Display (2560x1600). The monitor shows a maximum display resolution of 1200x800. I am using the only connection the monitor has to hook into the PC -- DVI-D Dual Link.In the screen options, under Control Panel, it shows the monitor as "CINEMA" but the drivers reflect "Generic PnP monitor".
From what I can discern, people used to use WinACD (WinACD | Download WinACD software for free at SourceForge.net) as a fix for this common issue, but the file has been discontinued and the last version was made for WindowsXP.
View 2 Replies
View Related
Feb 2, 2012
My daughter is a teacher and just got a new smart board installed. She has a Epson projector hooked up and can only get duplicate as an option in Windows 7. It will not let her use the projector as an extended display. She need to be able to change resolutions on each desktop as her laptop is wide screen at 16:10 and her smart screen is 4:3 ratio. She is a math teacher and needs to be able to make correct circles and graphs on both, one has circle while the other displays an oval. I have changed the resolution and can get one or the other to work right, but not both. As far as I know the only way to have different resolutions on each is with extended display.
View 1 Replies
View Related
Nov 21, 2009
im running win 7 x86 in a vaio vgn nr 21s/s with a 8400mgt and i cant find a driver which displays my correct resolution in my external wide screen (22'' at 1680/1050)
all i cant get is 1600/1200 or above but not he optimal.
View 5 Replies
View Related
Apr 28, 2012
Win 7-64 on Gateway FX6860 i7 system 8gm ram tons of HD space. Got "Page Failed to Load" error attempting to change my Windows 7-64bit display resolution. This used to work, but no more ( don't know what might have caused it). I ran "sfc /scannow". SFC reported that there were corrupted files that could not be repaired or replaced and to look at CBS.log. I did but can make no sense out of it.
View 2 Replies
View Related
Mar 29, 2012
My monitor uses the resolution 1024 x 768, but this morning it's on 640 x 480?i try to change the resolution back, but the Resolution option is greyed out?A warning underneath says: If your resolution is below 1024 x 768, some items may not fit on the screen.
View 1 Replies
View Related
Apr 4, 2011
I am using windows seven ultimate. I have accidentally choosen Display 2. In the screen resolution and now my laptop doesn't start in normal mode. Its like I have to connect to an external display like a laptop to view my Desktop. I can only access it using safe mode..
View 1 Replies
View Related
Nov 10, 2011
why cant read my message on face book and have display problem...what should i do my screen resolution 1024x600 are used/full?
View 1 Replies
View Related
May 14, 2009
I have Windows 7 RC Build 7100 x64, and my 15 inch Compaq CRT Monitor can not go past 1024x768 in windows 7, but in windows XP and Windows Vista, im able to go all the way up to 2048x900 57 hz, ive tried upgrading drivers, using a DVI-to-VGA adapter to use the DVI port with my vga monitor, and clearing the checkbox that hides the higher resolutions, but, i still cannot go any higher than 1024x768,
which is too low of a screen resolution for me, so, please help, ive also tried using vista drivers from 2008, but still a no-go, so im out of ideas, if theres a way to fix this, or this is unfixable for the time being, ill stick with XP, so please let me know.
View 4 Replies
View Related
Jul 4, 2012
I recently had a problem with my games (found in the thread here) that involved the games lagging badly. It turned out to be an image settings preference that I hadn't set properly. In my attempt to fix the problem however I did a clean install of drivers and updated to v301.42.
Since I installed the new driver none of my games would start (NBA 2K12, Assassin's Creed, Skyrim etc.) and simply go to a black windowed screen. Skyrim tells me that 'Your display doesn't support the selected resolution'. However, I am using the native resolution (1680x1050) for my monitor.
View 7 Replies
View Related
Jan 12, 2013
I've built myself a PC and run into some problems with the display resolution.
OS: Win 7 x64
Graphics Card: XFX/ATI Radeon HD 4550 512MB PCI-E 2.0 VGA/HDMI/Dual-Link DV
Monitor: Hanns G HZ194
Display Adapter: ATI Radeon HD 4550
Monitor: Generic PnP Monitor
Current Resolution (I guess) is 1024x768 although the settings show that I have selected the recommended 1366x768. Everything is moderately big and chunky - not safe mode though. Is that the Generic Monitor is causing the problem. How I can get a sensible resolution. It's causing me some big problems as some of my applications don't fit on the screen properly and don't have effective resize/scroll bars.
View 9 Replies
View Related
Aug 10, 2012
just installed onto a new machine windows7 home premium the monitor reports the vga signal as out of range (ie the resolution is too high) i have tried leaving the monitor disconnected until the machine has been on for 10 mins( same result) i have tried to get it into safe mode and it says "setup cannot continue in safe mode computer will restart now" so basically I am stuck I have gone into cmos on the mother board and reduced the on boardgraphics memmory to 64mb in an attempt to drop the resolution I do not have any other monitors available (within ten miles)?
View 1 Replies
View Related
Jul 8, 2011
i have wondows 7 and i cant find driver for my dysplay card i need intel 915gm for windows 7.
View 7 Replies
View Related
Dec 19, 2011
find the driver for my lenovo t60 video display
View 1 Replies
View Related
Feb 26, 2012
Hp 9000 unable to see display?
View 1 Replies
View Related
Apr 13, 2012
i recently got a new hard drive in which the guy had to rewrite a partition on it. i updated all the drivers and for some reason i cannot install these two microsoft updates everytime i try it fails, and doesnt tell me why it fails, and when the hard drive and windows 7 was installed and it was working, all the memory on the local disk drive was taken up except for 200mb which is strange because it only had the OS installed and any windows essiantal programs.
View 1 Replies
View Related
Jun 26, 2011
Today I bought an HDMI cable in order to have a dual monitor with my lg 42 inch tv. I updated my drivers and tried unplugging, restarting, etc. Under my control panel when I tell it to extend it will say unable to save display settings. I run a radeon 6950?
View 3 Replies
View Related
Apr 28, 2011
I am accessing another computer by read/write rights to specific folders.Today, I was at the host computer and I saw a file, that I deleted before, still there.When I was permanently deleting it, it was going off; but when I refresh, it was coming back.When I tried to just delete - recycle - it, it told me that I didn't have the rights to do it.When I checked the security options from the properties, it showed the owner as "Unable to display current owner" and didn't let me to change the owner or delete the file.What can I do in these kind of situations when current owner cannot be displayed or changed?(I understand the file can come from/to host computer, remote computer, and one of the external drives which may have a different owner -remote computer controls all the external drives, just some of the external drives has a creator owner in permissions also)
View 2 Replies
View Related
