Increasing Display Resolution In Gateway W340UI?
Sep 6, 2011
After installing Windows 7 on Gateway W340UI, the display resolution is decrease till 1024x768. And it hurts eyes and makes less comfortable work on laptop.
I suppose that the package drivers of Windows 7 are not compatible with Gateway W340UI. If you know the way of increasing screen resolution
View 4 Replies
ADVERTISEMENT
Sep 11, 2011
i have a htpc at home, hooked up to a 1080p tv at 1920x1080. because i sit 10 feet from my tv, i needed to increase the text dpi to 150% so i can see what's on the screen. however, i found that increasing the dpi is just simply reducing the screen resolution to 1280x720, and then enlarged to 1920x1080 so everything is bigger. i know this is true because many program state that as my resolution. full screen Internet videos automatically go to 720p instead of 1080p (unless i disable dpi scaling for chrome, which makes my text small again). there is a dramatic decrease in detail (1080 -> 720) when watching blu-rays with 150% dpi because the resolution is lowered by dpi scaling. pictures in browsers are enlarged and not shown at the original resolution.dpi scaling is pointless if it just reduces resolution. is there a fix for this, or is dpi scaling just this poorly implemented in windows 7?
View 2 Replies
View Related
Jan 20, 2011
Can't get my monitor to be reconized in 64 bit win7. Can't get EzTune to stay working after installing.
View 9 Replies
View Related
Aug 11, 2011
I have installed windows 7, now media center doesnt want to display video because not enough ram on video card. What can I do
View 2 Replies
View Related
Mar 17, 2012
My resolution is 640x480. How I increase resolution of my display?
View 1 Replies
View Related
Jan 11, 2013
Can't get monitor to display same resolution between 2 workspaces - Microsoft Community Copy/paste of text in OP (posted Nov 21, 2012): Ok, so here's my setup:HP EliteBook 6930p with ATI Radeon HD 3450 graphics card. Win 7 Pro 32 bit installed.I have 2 workspaces, both with docking stations.Workspace 1 (primary work site) had 24" wide (primary monitor) and 19" wide monitors.Resolutions that Windows let me set were 1920x1080 and 1440x900, respectively. These monitors were also hooked to the docking station via DVI and VGA cables, respectively.Workspace 2 had a 19" standard monitor (1280x1024, VGA, set as primary) and then I would open the laptop beside it for the dual monitor (1280x800).Today I have pulled the 19" wide from workspace 1 to replace the 19" standard at workspace 2. Windows, however, will only let me set the resolution to 1280x720 (still using VGA). Even taking off the "hide modes" option or going into the ATI Catalyst Control center to try and force it does not work. I've also tried switching between which one is primary or even making it single monitor display (on the 19" wide). 1440x900 is simply not available.
View 9 Replies
View Related
Oct 29, 2009
Windows 7 installed without any problems, and found all the hardware devices, but the only problem I have is that the monitor will only dislplay at 1920x1080. If you lower it , the monitor will not display a full screen. Tried all resolutions, and have the latest 191 drivers. Any ideas..
View 2 Replies
View Related
Aug 1, 2012
I have a Toshiba LED TV that I use as a secondary display. Up until today, it worked fine at 1920x1080. Now for some reason Windows is detecting it as a generic UPNP display and it it only let's me set it up to 1600x900. I have tried installing updates and drivers, but I cannot fix it.
View 2 Replies
View Related
Mar 9, 2010
How to Change the Screen Resolution in Windows 7 ?
View 0 Replies
View Related
Aug 10, 2009
I have a dual head setup that works ok. My issue though is that whenever I do a reboot, I have to go into display resolution settings and re-enable "extend" displays.
Is there a way to make this persistent? It's just annoying doing a reboot and having to spend time re-organizing your desktop every time.
View 3 Replies
View Related
Nov 22, 2010
I used to use a MBP as my main computer, coupled with a 30" Apple Cinema Display (Model A1083 - purchased three years ago). I recently purchased a PC (i7-950 3.06 GHz; AMD Radeon HD 6850 1GB; Windows 7 Home Premium 64-bit) to use as my home computer, and the MBP for mobile purposes. However, I cannot get the new PC to recognize the native resolution of the Apple Cinema Display (2560x1600). The monitor shows a maximum display resolution of 1200x800. I am using the only connection the monitor has to hook into the PC -- DVI-D Dual Link.In the screen options, under Control Panel, it shows the monitor as "CINEMA" but the drivers reflect "Generic PnP monitor".
From what I can discern, people used to use WinACD (WinACD | Download WinACD software for free at SourceForge.net) as a fix for this common issue, but the file has been discontinued and the last version was made for WindowsXP.
View 2 Replies
View Related
Feb 2, 2012
My daughter is a teacher and just got a new smart board installed. She has a Epson projector hooked up and can only get duplicate as an option in Windows 7. It will not let her use the projector as an extended display. She need to be able to change resolutions on each desktop as her laptop is wide screen at 16:10 and her smart screen is 4:3 ratio. She is a math teacher and needs to be able to make correct circles and graphs on both, one has circle while the other displays an oval. I have changed the resolution and can get one or the other to work right, but not both. As far as I know the only way to have different resolutions on each is with extended display.
View 1 Replies
View Related
Nov 21, 2009
im running win 7 x86 in a vaio vgn nr 21s/s with a 8400mgt and i cant find a driver which displays my correct resolution in my external wide screen (22'' at 1680/1050)
all i cant get is 1600/1200 or above but not he optimal.
View 5 Replies
View Related
Apr 28, 2012
Win 7-64 on Gateway FX6860 i7 system 8gm ram tons of HD space. Got "Page Failed to Load" error attempting to change my Windows 7-64bit display resolution. This used to work, but no more ( don't know what might have caused it). I ran "sfc /scannow". SFC reported that there were corrupted files that could not be repaired or replaced and to look at CBS.log. I did but can make no sense out of it.
View 2 Replies
View Related
Nov 1, 2011
I am unable to find a single resolution that will provide a good display on all websites. As a result I am adjusting it when moving from one site to another. Not difficult to do, but if I could rid myself of this chore, it would be great. Problems are wrong screen size and garbled text.WIN 7 premium, 64 bit, using 32 bit IE9 due to the lack of a flash player that will work on 64 bit IE9.
View 4 Replies
View Related
Mar 29, 2012
My monitor uses the resolution 1024 x 768, but this morning it's on 640 x 480?i try to change the resolution back, but the Resolution option is greyed out?A warning underneath says: If your resolution is below 1024 x 768, some items may not fit on the screen.
View 1 Replies
View Related
Apr 4, 2011
I am using windows seven ultimate. I have accidentally choosen Display 2. In the screen resolution and now my laptop doesn't start in normal mode. Its like I have to connect to an external display like a laptop to view my Desktop. I can only access it using safe mode..
View 1 Replies
View Related
Jan 25, 2012
banging my head with this issue...i have an ati radeon hd 5850 and samsung syncmaster 2233SW monitor....in the games the resolution being displayed is very low, somewhere in the 1280 x 1024 type of regions...though in the game settings its showing 1920 x 1080 .rivers are latest...11.12 amd vision engine control centerbtw my desktop resolution iv put at 1280 x 800 ...wen i put it at 1920 x 1080 in the desktop d sides of the screen get cut...evn my monitors auto adjustment function doesn
View 3 Replies
View Related
Aug 27, 2009
I currently have the Geforce 8600 GT 256mb <<(i think that's the VRAM not sure tho)
i can't run crysis on medium without lag....
my friend has a GeForce 8600 GT 1GB and can run crysis on High without any lag, and yes i have been to his house and personally played on his computer it is true! Don't tell me I'm lying i checked everything.
So, i can easily buy the GeForce 8600 GT 1GB but is it worth it? will it really make it so i can play crysis at-least on MEDIUM without lag on a low resolution like 1280x800 or even less. It's only $50 so even if i see a slight difference i would still buy it.
View 9 Replies
View Related
Jan 15, 2013
My mic is at 100% and it is working perfectly fine and everyone can hear me. However, at night time I have to talk really quiet or else my parents will wake up and get very mad. Talking this quiet however, nobody can hear me.
Is there some way or some program that can increase the mic volume over 100% so I can talk quietly at night time and the people I'm talking to can hear me?
View 7 Replies
View Related
Jun 29, 2012
I'm working on a friend's computer and she's having more BSODs lately. I'm trying to figure out the cause here. I've run MalwareBytes and found nothing. I don't know how to interpret these dump files, and I can't get it to blue screen for me.
System Specs:
HP - HPE-137c
Windows 7 Home Premium 64-bit
Core 2 Quad Q9300 2.5ghz
8GB RAM
Norton 360 =/
View 1 Replies
View Related
Aug 15, 2011
I'm always getting some graphical glitches when I minimize vmware workstation in full screen mode when running mac os x 10.6.6. And I think it's because of gdi objects always running out. So how do I increase the gdi objects in windows 7?
View 2 Replies
View Related
Dec 8, 2009
just purchased a cpu with windows 7. Wanted to increase virtual memory but didn't know how much I should increase it by. I have 8GB of ram and all that is allocated in virtual memory is 8183MB. I can increase it to 880,474MB didn't know how much I should increase it to? Any suggestions?
View 2 Replies
View Related
Dec 9, 2011
If bring it down to zero and it will immediately bring it back to 100%. It's like the system doesn't want to play any content below full volume.I first thought it was my mouse or keyboard, but I unplugged both of them but to no avail. I am at a loss as to what I should be doing. I can't play content at full volume, especially since I use headphones almost exclusively.[CODE]
View 6 Replies
View Related
Dec 22, 2012
I bought a new Philips SHP 2000. Decent headphone but no option to control the volume. Anyway, while watching movies I can use VLC or MPCStar to increase the volume beyond 100%. But for mp3, I usually go for WMP and the sound, obviously, is too low. Same way, while gaming the sound is too low even if I put it at 100% in game settings. The speaker icon in taskbar shows 100%.
Now, is there anyway to increase the sound?
View 8 Replies
View Related
Nov 21, 2009
Just a little hard to find bit of info on increasing the graphics size memory for the virtual SVGA graphics adapter on a Virtual Machine running under vmware products.
The default is only 16 MB (VRAM) which probably isn't enough to get Aero going on a Windows 7 Virtual machine. You need WKS 7 / vmware workstation 3.0 for 3D support in any case.
Solution
Edit the .vmx file with notepad (Open with notepad) and insert this line
svga.vramSize = "sizeInBytes"
I think 64MB is needed for AERO -- mine works with 64MB - but you could try 32.
Vm runs with FULL AERO -- no prob at all.
here's what I added to my .vmx file for a Windows 7 Professional X-64 Virtual machine - look at the last line.
pciBridge7.pciSlotNumber = "24"
scsi0.pciSlotNumber = "160"
usb.pciSlotNumber = "32"
ethernet0.pciSlotNumber = "33"
sound.pciSlotNumber = "34"
ehci.pciSlotNumber = "35"
vmci0.pciSlotNumber = "36"
scsi0.sasWWID = "50 05 05 66 67 3e f6 b0"
vmotion.checkpointFBSize = "134217728"
usb:0.present = "TRUE"
usb:1.present = "TRUE"
ethernet0.generatedAddressOffset = "0"
vmci0.id = "780936453"
usb:1.deviceType = "hub"
usb:0.deviceType = "mouse"
ide1:0.autodetect = "FALSE"
ide1:0.allowGuestConnectionControl = "FALSE"
tools.upgrade.policy = "manual"
scsi0:1.present = "TRUE"
scsi0:1.fileName = "Windows 7_pro x64-0.vmdk"
scsi0:1.redo = ""
floppy0.present = "FALSE"
ide1:0.startConnected = "TRUE"
svga.vramSize = "64000000"
Give it say 64 MB. Don't forget its size in BYTES you have to set -- if you do it wrong then the VM won't power on so backup the .vmx file before messing around with it.
View 5 Replies
View Related
Feb 16, 2011
The hdd has two patitions named C and D (for recovery).Upgrading from Vista to Window 7, has rendered the 10 GB (partition D) too small. The partition C is 176 GB
View 2 Replies
View Related
Jul 11, 2012
How To Increase Place in c drivd
View 2 Replies
View Related
Feb 22, 2012
My laptop has increasing updates when I switch it on. It started at update 1 of 1 and is now at update 1 of 66. Which means it can take forever to start. I don't understand why this is increasing all the time? And I can't find any similar queries on any support sites? Is it possible this is a virus? I have AVG free anti-virus software and the computer scan is coming out clear. Even in Safe mode.
View 5 Replies
View Related
Oct 3, 2010
I've installed Windows 7 Ultimate on a notebook which previously ran Vista. No problems there .....
I've now installed Ubuntu (now updated to 10.04) so that it can boot to either OS. It all works fine and when I first power up, I get a screen which invites me to select the OS I want to use. There are however two problems:
1) it defaults to Ubuntu (whereas I would prefer it to default to Windows 7), and
2) the list of choices is getting increasingly complex with an expanding list of choices (with each major update of Ubuntu adding more); it even seems to include an option to go back to Vista!
As long as I move down the list and make the right selection quite speedily, I get to where I want to be (though, as I say, I would like to change the default option).
Is there any way I can edit/shorten this list without damaging the functionality and how can I change that default?
View 3 Replies
View Related
Dec 16, 2011
How to increase drive c size because it is running out of space. PLEASE HELP
View 2 Replies
View Related