My mic is at 100% and it is working perfectly fine and everyone can hear me. However, at night time I have to talk really quiet or else my parents will wake up and get very mad. Talking this quiet however, nobody can hear me.
Is there some way or some program that can increase the mic volume over 100% so I can talk quietly at night time and the people I'm talking to can hear me?
so i have a blue yeti, and i'm an online animator/voice actor. whenever i record audio on my blue yeti (or any other mic) i record about 4-6 inches from the mic, and turn the gain down enough that the audio doesn't peak as i yell or whatever. this is what you're supposed to do if you don't want your audio levels peaking and making your recording sound horrible and corrupted. however, afterwards, it means i have really quite recordings. not a problem right? now that it's recorded right, i can boost the volume of the entire clip afterwards right? wrong. i'm not an audio expert so i must be missing something. but why in gods name would the audio distort and peak after it's recorded successfully? it's all there, it's all clean audio. if i turn the volume on my speakers all the way up it sounds crystal clear! all i want to do is do that inside the computer so that when i upload it to Internet people don't have to turn their speakers so far up. but if i increase the clips volume in the computer, it distorts! it sounds awful! why?! i tried in sony acid and audacity and they both do the same thing! i can take sound effects, and recordings made by other producers and crank them up nice and loud, but mine just fall apart!
View 2 Replies View RelatedIf bring it down to zero and it will immediately bring it back to 100%. It's like the system doesn't want to play any content below full volume.I first thought it was my mouse or keyboard, but I unplugged both of them but to no avail. I am at a loss as to what I should be doing. I can't play content at full volume, especially since I use headphones almost exclusively.[CODE]
View 6 Replies View RelatedI bought a new Philips SHP 2000. Decent headphone but no option to control the volume. Anyway, while watching movies I can use VLC or MPCStar to increase the volume beyond 100%. But for mp3, I usually go for WMP and the sound, obviously, is too low. Same way, while gaming the sound is too low even if I put it at 100% in game settings. The speaker icon in taskbar shows 100%.
Now, is there anyway to increase the sound?
I've searched everywhere, including (when you click F1) in windows 7. I need a keyboard shortcut for increasing and decreasing volume, and I don't mean when playing a video or something, I mean the "general" one. (Not in Media Player)
View 5 Replies View RelatedI bought a USB A4 Tech HU-200 HeadPhone Its volume is quite high even when the windows volume is at 0, When its at max 100 it works like dedicated speakers Is there any way to reduce the volume beyond the lowest volume of windows 7?
Note: My Headphone does not have any soft of driver or software
I just received a new keyboard today: Thermaltake Challenger Ultimate. I went from a Logitech G15.
First thing I did was connect the keyboard and install the software that came along on the CD, it probably also installed the correct drivers. First after this did I uninstall the software and drivers from the old Logitech G15. But before that, and now after, the volume buttons on my new keyboard is still not adjusting the volume when I press them.
A speaker-icon like this shows up when I press the volume buttons, so its not that the keys are not working: (ignore the text behind it, its me writing an assignment)
I recently got this problem, that my volume hotkeys stopped working, (Acer Aspire 5560G) AMD High Definition Audio. I also tryed plug in other keyboard that have's volume hotkeys but still doesn't work.
View 2 Replies View RelatedI like to listen to music loudly sometimes. I have both the volume mixer and my application's volume set to maximum levels, but it's not loud enough for my liking. Is there any way to increase the maximum sound volume in Windows 7?
View 9 Replies View RelatedWhat is the optimal set-up?
High volume on speakers and low in windows, or low on speakers and highest in windows?
[email]amtemirak@hotmail.comSpoiler :[spoiler]
View 1 Replies View RelatedI currently have the Geforce 8600 GT 256mb <<(i think that's the VRAM not sure tho)
i can't run crysis on medium without lag....
my friend has a GeForce 8600 GT 1GB and can run crysis on High without any lag, and yes i have been to his house and personally played on his computer it is true! Don't tell me I'm lying i checked everything.
So, i can easily buy the GeForce 8600 GT 1GB but is it worth it? will it really make it so i can play crysis at-least on MEDIUM without lag on a low resolution like 1280x800 or even less. It's only $50 so even if i see a slight difference i would still buy it.
I'm working on a friend's computer and she's having more BSODs lately. I'm trying to figure out the cause here. I've run MalwareBytes and found nothing. I don't know how to interpret these dump files, and I can't get it to blue screen for me.
System Specs:
HP - HPE-137c
Windows 7 Home Premium 64-bit
Core 2 Quad Q9300 2.5ghz
8GB RAM
Norton 360 =/
I'm always getting some graphical glitches when I minimize vmware workstation in full screen mode when running mac os x 10.6.6. And I think it's because of gdi objects always running out. So how do I increase the gdi objects in windows 7?
View 2 Replies View Relatedjust purchased a cpu with windows 7. Wanted to increase virtual memory but didn't know how much I should increase it by. I have 8GB of ram and all that is allocated in virtual memory is 8183MB. I can increase it to 880,474MB didn't know how much I should increase it to? Any suggestions?
View 2 Replies View RelatedJust a little hard to find bit of info on increasing the graphics size memory for the virtual SVGA graphics adapter on a Virtual Machine running under vmware products.
The default is only 16 MB (VRAM) which probably isn't enough to get Aero going on a Windows 7 Virtual machine. You need WKS 7 / vmware workstation 3.0 for 3D support in any case.
Solution
Edit the .vmx file with notepad (Open with notepad) and insert this line
svga.vramSize = "sizeInBytes"
I think 64MB is needed for AERO -- mine works with 64MB - but you could try 32.
Vm runs with FULL AERO -- no prob at all.
here's what I added to my .vmx file for a Windows 7 Professional X-64 Virtual machine - look at the last line.
pciBridge7.pciSlotNumber = "24"
scsi0.pciSlotNumber = "160"
usb.pciSlotNumber = "32"
ethernet0.pciSlotNumber = "33"
sound.pciSlotNumber = "34"
ehci.pciSlotNumber = "35"
vmci0.pciSlotNumber = "36"
scsi0.sasWWID = "50 05 05 66 67 3e f6 b0"
vmotion.checkpointFBSize = "134217728"
usb:0.present = "TRUE"
usb:1.present = "TRUE"
ethernet0.generatedAddressOffset = "0"
vmci0.id = "780936453"
usb:1.deviceType = "hub"
usb:0.deviceType = "mouse"
ide1:0.autodetect = "FALSE"
ide1:0.allowGuestConnectionControl = "FALSE"
tools.upgrade.policy = "manual"
scsi0:1.present = "TRUE"
scsi0:1.fileName = "Windows 7_pro x64-0.vmdk"
scsi0:1.redo = ""
floppy0.present = "FALSE"
ide1:0.startConnected = "TRUE"
svga.vramSize = "64000000"
Give it say 64 MB. Don't forget its size in BYTES you have to set -- if you do it wrong then the VM won't power on so backup the .vmx file before messing around with it.
The hdd has two patitions named C and D (for recovery).Upgrading from Vista to Window 7, has rendered the 10 GB (partition D) too small. The partition C is 176 GB
View 2 Replies View RelatedHow To Increase Place in c drivd
View 2 Replies View RelatedMy laptop has increasing updates when I switch it on. It started at update 1 of 1 and is now at update 1 of 66. Which means it can take forever to start. I don't understand why this is increasing all the time? And I can't find any similar queries on any support sites? Is it possible this is a virus? I have AVG free anti-virus software and the computer scan is coming out clear. Even in Safe mode.
View 5 Replies View RelatedI've installed Windows 7 Ultimate on a notebook which previously ran Vista. No problems there .....
I've now installed Ubuntu (now updated to 10.04) so that it can boot to either OS. It all works fine and when I first power up, I get a screen which invites me to select the OS I want to use. There are however two problems:
1) it defaults to Ubuntu (whereas I would prefer it to default to Windows 7), and
2) the list of choices is getting increasingly complex with an expanding list of choices (with each major update of Ubuntu adding more); it even seems to include an option to go back to Vista!
As long as I move down the list and make the right selection quite speedily, I get to where I want to be (though, as I say, I would like to change the default option).
Is there any way I can edit/shorten this list without damaging the functionality and how can I change that default?
How to increase drive c size because it is running out of space. PLEASE HELP
View 2 Replies View RelatedIn setting up my wife's computer, I allocated 30 gigs to the C: partition...probably a big mistake. I'd like to increase its size by about 100G, and I have shrunk the D: and E: partitions accordingly, using the Disk Management tool.
Now however I am stuck with two separate blocks of unallocated space, and apparently no way to expand the C: partition into that extra space. Is there any way this can be done within Windows 7 or do I have to seek out some additional software?
i have a htpc at home, hooked up to a 1080p tv at 1920x1080. because i sit 10 feet from my tv, i needed to increase the text dpi to 150% so i can see what's on the screen. however, i found that increasing the dpi is just simply reducing the screen resolution to 1280x720, and then enlarged to 1920x1080 so everything is bigger. i know this is true because many program state that as my resolution. full screen Internet videos automatically go to 720p instead of 1080p (unless i disable dpi scaling for chrome, which makes my text small again). there is a dramatic decrease in detail (1080 -> 720) when watching blu-rays with 150% dpi because the resolution is lowered by dpi scaling. pictures in browsers are enlarged and not shown at the original resolution.dpi scaling is pointless if it just reduces resolution. is there a fix for this, or is dpi scaling just this poorly implemented in windows 7?
View 2 Replies View Relatedi am a new comer of laptop world.do u have any suggestion for increasing the battery life of my lappy?i run my lappy maximum when there is power nd never use more than 1 hour on battery as power came instantly.so my battery was always full n showing not charging.is it good to run lyk that or i have to discharge the battery fully nd after that again recharge it??
View 9 Replies View RelatedI have a 3G connection which at times need to be redialled. But the problem is in Windows 7 the maximum limit is 99.
Is there anyway to increase this limit?
After installing Windows 7 on Gateway W340UI, the display resolution is decrease till 1024x768. And it hurts eyes and makes less comfortable work on laptop.
I suppose that the package drivers of Windows 7 are not compatible with Gateway W340UI. If you know the way of increasing screen resolution
I've found that since recently starting with Win7 the font/point size in nearly every program I use is 'thin' or 'weak'. Even Firefox. It's all very pretty and neat and I can see it alright, but I'd like to be able to change it to suit me. No problem doing this in Word etc.I'm using a full-HD TV/monitor at full resolution. All I can see to do is change 'display image'. I note this can range from the default 125%>150>200.However, this brings up a window pointing out there may be problems encountered doing this.All I really want to do is change the font to [b]BOLD[/b] as I've just done! Is that so difficult?I'm assuming that all the other programs are taking their cue from font settings within Win7. As a Win7 newbie, am I right in thinking this and is there any way I can easily change to the bold font I'd prefer? Or am I missing something basic here?
View 1 Replies View RelatedI want to change the icon size in the windows 7 task bar from 32x32 px to 64x64 px.. is there a way to do this?
I was thinking maybe increasing the dpi of the task bar only?
I know there are heaps of topics out there, but they all seem to saying things which I dont understand and dont apply to me. All I need to do is to enable certain applications use connection 1 and the rest use connection 2. How do i do that?
View 2 Replies View RelatedI have an Intel I5 Ivy Bridge CPU, Win 7 64-bit Home Premium OS, 16Gb RAM and Nvidia GTX 550 TI graphics board with 1 Gb DDR5 memory. I run two real-time stock charting/trading programs on two monitors.
My objectives are to improve screen re-draw time and to decrease Windows' hard disk access. While there are other alternatives to consider, I'd like to invite the community to offer thoughts on two questions:
1. How to increase Window's RAM usage for paging/caching : The System Monitoring tools are showing that RAM usage is only about 30% of the 16Gb installed while Windows' hard drive caching is continuously busy. If there is a tweak to increase RAM usage, I would expand RAM memory to 32Gb.
2. Otherwise, I might install a 120 Gb Solid State Drive. Then, the question is whether using the SSD for the OS or as the cache drive as per Intel Rapid Storage
Have been getting BSODs more and more frequently over the last week. Can't think of anything special that triggered the behaviour though. It mostly happens when the computer idles and I'm doing other stuff, and doesn't seem to relate to computer load etc.
Did a bit of digging myself and used WhoCrashed to identify Comodo Backup and Daemon Tools as possible culprits. They are both uninstalled now. Installed drivers for the bluetooth which were missing and giving an exclamation mark in device manager. After that no exclamation marks or errors there.
Today I did a full memorycheck with Memtest86+, which passed all runs.
Got another BSOD couple of hours ago (0x00000124), with no lead from WhoCrashed on the root cause so now I resort to asking the gurus.