My little daughter were messing with my laptop the other day and somehow turned off the smart pad. The laptop were turned off and she turned it on and fingered with it (it turned on and I have a user password to open it.) and when I turned it back on the smart pad didn't work anymore. Do Ihave to update the drivers or what? The pcsays it's updated, but still don't work. I have used both wireless and smart pad without any problems. Any tip on how to turn it back on? Have tried the souse section on controll panel without results. I feel handicapped witout the smart pad since I finally have get used to using it
My HP Smart Web Print program was working fine. I never did close it, but it is gone. And also the Leaf Icon is nowhere to be found. That was how I turned it back on before. How can I find it to get it to show up on my Internet Explorer again?
My HP Smart Web Print program was working fine. I never did close it, but it is gone. And also the Leaf Icon is nowhere to be found. That was how I turned it back on before. How can I find it to get it to show up on my Internet Explorer again?
I have installed the Elan touchpad driver I can't get it to scroll correctly. In addition an Elan touchpad .exe run box comes up at every boot which does nothing when Run. I finally browsed to it in the Programs folder and deleted that .exe file so it wouldn't pop up at every start. It shows installed in the Device Manager, however doesn't have the functions I had in the Samsung factory install. This and the sound driver don't seem to work right when installed, as though there is more software needed that isn't on the Downloads page at Support for NP-RF511.
It doesn't work because it cannot load EIO.dll. And it can't do that because it's not a signed driver. How can it be overriden? Has anyone got this program to work on Windows 7 x64
Phone model no. not identified, but software version is vx560404.
When the phone is connected to the computer, the usb recognition sound is issued, but the "Found New Hardware" message is not displayed nor is the "Safely Remove Hardware" icon.
The phone is displayed in Device Manager (LGE CDMA Composite USB Device), and in the Control Panel item Devices and Printers (as LG Mobile Phone, LG Mobile (Modem) and LG Mobile (Serial)). However, it is not displayed in Windows Explorer (trying to transfer photos from phone to computer).
I tried running the Troubleshooter, and a message was displayed that said a problem (not identified) was fixed. Except it wasn't. Restarting the computer did not solve the problem.
Previously i had smart audio for better performance of the sound and now after installing windows 7 home premium again that is not available. Please advice me what to do in downloading it. The internal harddisk got damaged and i had to install everything manually and so I have downloaded the conexant sound driver from toshiba site
I have a desktop PC with 2 x 1 GB discs which has a startup problem. When I start the PC up I get a screen Saying SMART status bad, Backup and Replace. Press F1 to run setup. When I do this, I get the ASUS EFI BIOS UTILITY screen giving various options. Pressing the "Boot Menu" button gives me 6 options. Pressing the SATA ST option results in the message "A disc read error occurred press CTRL + ALT + del to restart" on a black screen. I have a Windows 7 repair disc, but how do I get the PC to default to it when the DVD drive is not an option on the "Boot Menu". I have a Windows backup on an external drive.
I am trying to do a clean install of Win 7 Pro on a new Dell XPS. My laptop came with a 32gb mSATA drive and I want to keep the Intel Smart Reponse activated. Whenever I try to do a clean install with the SATA operation set to "Intel Smart Reponse" in the BIOS, it does not find any disks to install the software too. When I try to load a driver for the drivers, it says no signed drivers were found. I was able to install the Win 7 Pro with the sata operation set to AHCI, but that won't let me enable smart response.
I have been using my HP Pavilion g6 laptop for around a year now, and so far it has been smooth sailing. However, around a day or two ago, my computer suddenly became unbearably slow on normal mode. I would try to open google chrome and it would freeze up my computer, and even opening the start menu took an incredible amount of time. This was a sudden onset of slowness and I cannot remember if I installed any updates that may have caused this. Using even safe mode, opening the uninstall part of control panel would take ages. I have tried many things to fix this:Used SFC/scannow, caused a crash.
Used disk check on safe mode, says that I need to defrag 1% of the disk. However, It also says there is a SMART check failure. I am quite confused about this because when I looked again it said that the smart status was "good". (HP support center) Deleted temporary files Checked task manager to see if there was any processes that were taking up too much memory, it looks good normally. However, on normal mode whenever I would open chrome the CPU would spike to 60%.
Specs are: AMD A6-3400M APU with Radeon graphics. 6gigs of RAM
I am testing something and I want to populate errors to the S.M.A.R.T. but not damaging my HDD. any one has any ideas on that. I am using Windows 7 32 bit.
I've a corsair ssd 60GB with the latest firmware 1.3 And I wanted to use EZ smart response from gigabyte When I run eZ smart response it reboots windows to configure my setting to RAID and it does that
But after that the ssd does not appear in intel rapid storage technology even though it's in bios and in win explorer I even tried running smart response from gigabyte and gave me error that I need irst 10.5 or higher (I have 10.5) I download the latest version from intel but still the same error
if this hdd smart error C8H is a serious one? i can find only litle details on this. I'd like to know this as i bought an old IDE laptop drive for a pentium 4 era laptop that needed a slight upgrade, then one day i discovered this error while just playing around with the laptop, there's 19 errors of this so far and i don't even know what it does, the hd however works just fine except for that error, no surface problems or anything.
If anyone has heard of those type of softwares (like WinAshampoo's RAM Booster or something like that). I would like to know if these work in Windows 7?
my favorite is the one by IOBit. It comes with their Advanced System Care something like that XD
I was having problems with my computer running slowly after downloading MVPS Hosts and kept cleaning out the DNS client, etc.I rest back to MS hosts and DNS and did a fix it for slowness and now I keep getting popups for my HP printer/scanner program and even with cancel they keep popping up.I took some screen shots - but will only upload one as says others are too large - so I cut and pasted most of the messages onto the same paint.
I need some Drivers for my computer I bought at Cyberpower pc. It's an x- infinity case. It's about 5 years old. They said they don't have the driver's anymore. Wondering I somebody here has them. Drivers for the USB smart card.
Is there a way I can PERMENANTELY disable the smart pad? Every time I boot up the little darling is back up and working, I have to uninstall then re boot to stop it every single time I use the lap top.I have downloaded the latest driver, but it makes no difference. The fn9 button does not work at any time either so I do not have that option.
The only thing that failed is "Re-allocated sector count: results are value 138, threshold 140, worst 138.I have noticed my laptop heating up more than normal for a couple of weeks. Is this bad news?
Received an iPhone 4 S. D/loaded iTunes (for 64bit) and installed. Connected phone via usb port.iTunes does not show phone icon; no connection or synchronisation can occur.I have spent ages looking on the Apple site (boy they are tricky over there!) and the trouble shooter offered didn't help.As far as I can tell it's a conflict problem possible with anti virus (MSE).What I don't know how to do is: -properly test the usb port (which works fine for remote mouse plug in, any temporary flash drives via a hub) and test for what is preventing the two from recognising one another.
This isn't really a driver issue but more of a some help with local policy / permissions (I think).
I have just put a new Windows 7 PC on our domain and I am having a few troubles getting the Gemalto Smart card to work as a user. This card has the Gemplus esigner which lets us authenticate to connect back to our bank for secure banking.
Basically this PC is in a domain which locks the desktop and programs down so a user cannot access Programs etc. We then place an RDP icon in the start menu and they access their programs via RDP into a terminal server. Only a few programs are run locally on the PC.
When we install the Gemalto software on an XP machine we set permissions on the installation folder for everyone to have read / write access along with the registry key and this works fine an allows users to be able to use this on the local PC.
With Windows 7 I have tried this but I keep getting "Cannot fine the certificate store" error – however this works as administrator (local PC) which leads me to a permissions thing or a domain setting.
I can insert the smart card and manually import the certificate which reports successful yet the same error occurs.
Has anyone else has this issue or can anyone point me in the right direction?
