I've a corsair ssd 60GB with the latest firmware 1.3 And I wanted to use EZ smart response from gigabyte When I run eZ smart response it reboots windows to configure my setting to RAID and it does that
But after that the ssd does not appear in intel rapid storage technology even though it's in bios and in win explorer I even tried running smart response from gigabyte and gave me error that I need irst 10.5 or higher (I have 10.5) I download the latest version from intel but still the same error
I am trying to do a clean install of Win 7 Pro on a new Dell XPS. My laptop came with a 32gb mSATA drive and I want to keep the Intel Smart Reponse activated. Whenever I try to do a clean install with the SATA operation set to "Intel Smart Reponse" in the BIOS, it does not find any disks to install the software too. When I try to load a driver for the drivers, it says no signed drivers were found. I was able to install the Win 7 Pro with the sata operation set to AHCI, but that won't let me enable smart response.
There are some forms that I fill out on line that when I hit the send button on the form it tries to open and send it via outlook but I don't use outlook. I may be using g mail or yahoo or some other provider for my e-mail. Is there a way to change that? Normal e-mail works fine, it's only when I try to respond to a form on the internet, and not all forms do it.
My lap top is only 2 month old, I have kept it in great condition, not downloading tons or random movie and music files. It has been running perfectly. It is a Windows 7 HP Probook 4530s.Today my friend and I were downloading Java to play minecraft. The download went ok, and I proceed to boot up the minecraft program. When the program loaded the computer began lagging horribly. I quickly ended the program and attempted to restart it, the program ran with the same horrible lag.So I ended the program, but my computer was still lagging, all programs I attempted to run took for ever to start up, and when they did they froze. I restarted the laptop and after all the programs started up, I attempted to run Firefox, and it loaded, then froze, as did all other programs, I had to force the computer off. I spent the rest of the day cleaning up the computer, deleting old program files, music, I ran multiply disk clean ups, and attempted to defrag the hard drive. But these programs all froze.I restarted and ran in Safe Mode, and it worked fine, all the programs loaded and nothing froze. Me and my friend worked on it all day, finally we found out that the Minecraft program had installed wrong, or something like that, THe program files were installed in the wrong place. We deleted those file and restarted the computer. It started up, and All programs functioned for a while, and the lag was gone, it all ran smoothly, then maybe two minutes later everything freezes.
I'm running 64 bit Windows Home Premium. When I click on an image in eBay to enlarge it, I get no response, but the word "javascript;" appears at the bottom left of my screen. I also have a problem opening some links on other web sites. What settings do I need to change to overcome the problem?
The main reason I joined is because my windows 7 has a serious clicking problem. I drew the line when I tried to open "advanced network sharing settings" from the control panel. I clicked and clicked but it wouldn't open. This same problem occurs with lots of other functions with the control panel and the OS in general. I am an administrator and I can assure you it is NOT a hardware problem.
I work within the IT department and i require to install some software etc on machines remotely on our network, the machines tend to be offline due to been portable computers so i wanted to see if there was a way to create a script or something so if did a ping response from command line (ping machine name -t) so that when the machines did actaully appear back on the network i would receive say an email from Microsoft Outlook (exchange) This would be weather the command line has to stay open (which i know i could do with the Asstrix syntax but i dont want to keep it open, just have something to notify me when its back on our network?
I've used Window Vista for a short time before changing to Windows 7 64-bits by upgrading it from Vista. After I've upgrade to Windows 7, all programs seem working well without any problem. (I've tried downloaded the driver for Windows 64 bits and upgrade/update everything I can like Windows 7 or the latest printer driver)
But when I try to print any document from any program or browser, it take very long time (around 10-30 minutes) before the printer start to print .
And before the printing if I try to adjust any option via printer properties in the printing screen of any program, it take a long time (more than 3 minutes) and most of the time it has 'NO RESPONDING' in the program and I cannot do anything with it (but if I wait for a long time, it will show up like nothing wrong).
I've tried using notebook with Windows 7 32-bits, but it has NO problem at all.
I've ask EPSON in my country and they only prove that it works fine with Windows 7 64-bits (and send the document for me). But my problem still exists and I have no idea how can I find out the cause or fixing it.
I am having difficulty opening some topics in the Control Panel. I have Windows 7 64 bit os. For example, when I click on Network and Sharing Center, there is no response. When I click on Device and printer, there is no response. When I click on display, I can open the Display window. Prior to that I uninstall a Monitor software, MaxiVista Ver. 4.0, and when I tried to reinstall it, it will not reinstall. I am not sure whether this is a related event. I tried to open Control Panel > Recovery > Open System Restore, and it will not open.
One night I turned it on to check my email, something went wrong but I don't remember what.Anyway, I rebooted it manually and it took forever to start again.fter the starting windows screen it was just black forever. Eventually it did turn on after like 5 minutes but things didn't work well.Here's a list of problems i'm experiencing:When you drag your cursor over an icon or a taskbar icon it takes a minute for the cursor to to highlight it.Any program you do manage to click on takes forever to start. Some programs don't start at all, windows live mail tells you it can't start because there isn't enough memory left and you sholuld check your hard drive. I know there is plenty of memory left, there isn't much on that computer.
I can't do system restore, there are no restore dates available and when you try to create one it says it can't because the computer responded too slow.I can't back up my system, that also tells me the program responded too slow.AVG free virus scanner (installed after this started) can't find any virus or spyware.Advanced system care 4 (Installed after this started) found plenty of troubles and said it fixed them but everything is still broken and functioning incredibly slow.Internet works but it is slow.Every now and again the icons and start menu dissapear and come back whenever they feel like it.
I am running a legacy program in XP Mode (Adobe Pagemaker 7.0). When I need to save a document, usually to a Windows 7 drive, it takes a very long time to do so - unless I move the mouse pointer within the window. I know this sounds strange but I've confirmed this behavior many times.
I'm guessing that moving the mouse generates an IRQ which temporarily gives the XP mode process higher priority. If it is a large file which takes longer to save, I can observe the save process speed way up when moving the mouse and slow way down when I stop.
Is there some setting somewhere to speed up the process without the mouse movement - my hand is getting tired.
I have a D-Link DIR615 router which I've been using for the past 5 months (no problems whatsoever). After i've got my laptop from the support service I can't seem to successfully connect to my home network.
My phone can connect with no problem to my router. My laptop sees other wireless networks. This is how it goes: when I try to connect it immediately says "unable to connect" when I run the diagnostics I get the "windows did not receive any response from the wireless router" message. I can only connect after like 30 mins of changing the wireless settings (usually SSID and security) from my router + rebooting it countless times. Even then, I usually check "automatically connect" and the next day after I arrive from work, it doesn't really connect automatically and can't even connect to it (unable to connect message). Even typing a wrong passphrase when it's secured it doesn't say "wrong passphrase" but "unable to connect".
Another very wierd thing is that my wireless network disappears from the network list after a few minutes, I still see other secured wireless networks.
I can connect to a wireless network made by phone (wifi hotspot) with no problems.
my yahoo email is taking too long to response on log out and then i get this message.The connection has timed out The server at [URL] is taking too long to respond The site could be temporarily unavailable or too busy. Try again in a few moments. If you are unable to load any pages, check your computer's network connection. If your computer or network is protected by a firewall or proxy, make sure that Firefox is permitted to access the Web.and i click try again it does the samething usually i have to click tryagain twice are go to my yahoo homepage and click my email and then logout again and usually after tha it logs out .I though maybe it was because i was using open DNS on my router so i switch to dynamic again but tha didn't help .
Win7x64, all updates, 4GB, 300GB, 180GBfree, Intel i3
WLM was quick as one could want till two days ago. Don't know what happened but now changing from one folder to another takes 10 to 15 seconds. Where to start looking for the holdup?
On bootup on my Win 7 64-bit desktop nothing appeared on the monitor , just a completely black screen .I realise this could be due to several causes - monitor failure , video card problems etc and I have yet to check these out but my reason for posting here before I do these basic checks is that this problem is accompanied by an unusual response to the Power button which did not exist before as far as I am aware.When I got this black screen I pressed the power button to switch the PC off . normally this requires you to hold this button down for about 5-10 secs . This time when I did this the PC started to power up again and , to prevent this , I now have to hold this button down for , at least 30 secs or so , before the PC stays off.Could this power button anomaly be related to this black screen?
often, when I want to put computer into sleep mode or sometimes when I restart it, procedure doesn't finish, display usually turns off, but computer is still running. The only option is to turn it off manually by holding power button.
After restarting I have a lot of (15) errors in system log:
A timeout (30000 milliseconds) was reached while waiting for a transaction response from the XXXXXX service.
XXXXXX = iphlpsvc, Schedule, SENS, BITS, CertPropSvc, EapHost ... etc.
Several days ago I have updated my bios and some drivers, so I suspect that the reason may be some driver.
I have dell latitude e4310 notebook running Win7x64 SP1.
Unfortunately i'm not an expert in Microsoft Access 2010, but i've come across a problem with one of my databases that is running on a Windows 7 computer.The problem is that when the database runs, it has a very very slow response time yet if I copy it to another Windows 7 or XP computer the response time is fast.So far I have updated the computer with Windows 7 updates, and modified the registry buffer size to 50000 in the Access Connectivity Engine setting, but the Microsoft Access database is still very slow
I am testing something and I want to populate errors to the S.M.A.R.T. but not damaging my HDD. any one has any ideas on that. I am using Windows 7 32 bit.
if this hdd smart error C8H is a serious one? i can find only litle details on this. I'd like to know this as i bought an old IDE laptop drive for a pentium 4 era laptop that needed a slight upgrade, then one day i discovered this error while just playing around with the laptop, there's 19 errors of this so far and i don't even know what it does, the hd however works just fine except for that error, no surface problems or anything.
If anyone has heard of those type of softwares (like WinAshampoo's RAM Booster or something like that). I would like to know if these work in Windows 7?
my favorite is the one by IOBit. It comes with their Advanced System Care something like that XD
I was having problems with my computer running slowly after downloading MVPS Hosts and kept cleaning out the DNS client, etc.I rest back to MS hosts and DNS and did a fix it for slowness and now I keep getting popups for my HP printer/scanner program and even with cancel they keep popping up.I took some screen shots - but will only upload one as says others are too large - so I cut and pasted most of the messages onto the same paint.
I need some Drivers for my computer I bought at Cyberpower pc. It's an x- infinity case. It's about 5 years old. They said they don't have the driver's anymore. Wondering I somebody here has them. Drivers for the USB smart card.
Is there a way I can PERMENANTELY disable the smart pad? Every time I boot up the little darling is back up and working, I have to uninstall then re boot to stop it every single time I use the lap top.I have downloaded the latest driver, but it makes no difference. The fn9 button does not work at any time either so I do not have that option.
The only thing that failed is "Re-allocated sector count: results are value 138, threshold 140, worst 138.I have noticed my laptop heating up more than normal for a couple of weeks. Is this bad news?
