I love restore when it works but since I got my pc I have never been able to get it working. Every time I run it all I ever get is"please wait while your windows files and settings are being restored system restore is initializing..."I left it for 8 hours over night (even though I hate leaving my pc on over night) to see if it was just me being impatient but 8 hours later the message was still through same no change.
View 9 RepliesSystem Restore will not create a restore point or restore to a previous date & time.The error message was: A restore point could not be created: An error was detected in the Volume Shadow Copy Server (VSS).The problem occurred while trying to contact VSS writers. Verify that the Event System Sevice and the VSS service are running & check for associated errors in the event logs (0x80042318).Volume Shadow Copy is started & running (done in system events).Event System Sevice and the VSS service are started and running. But no cigar, SR still broken.
View 9 Replies View RelatedDoes anyone know how to schedule/automate a rollback to a system restore point at a set time each day?What i'm trying to do is:1. Disable the standard system restore behavior for creating restore points when installing apps and drivers.2. Automatically/schedule a restore point to be created every morning. (probably using Task Scheduler)3. Automatically/schedule a rollback to that morning restore point every night.This should allow users to mess up the workstation during the day, and restore a working rollback point at night when users are not using a workstation.Updates are scheduled at nighttime, so before that happens, it should rollback to a good restore point, apply updates, then create a working "new" restore point with the updates in the morning....etc.
View 4 Replies View RelatedSo I cleaned my registry using RegSeaker and now my computer BSODs at the 'starting windows' screen, even if I try to start in safe mode. I created a backup of my old registry before cleaning and I can access it using the command prompt that you can access in the system restore options. However, when I try to update the registry with it I get an error message saying 'cannot import.
View 7 Replies View RelatedOK, so a couple of days ago, my HP desktop crashed and then went through the whole System Recovery loop(I couldn't login to Safe mode, wouldn't let me past the System Recovery Screen). Well I backed up the entire C drive using Backup your files in the menu. Then it shows you all the file types it will back up; i.e photos, videos, e-mails and bookmarks. So I did that to an external hard drive and it comes out to 143GB.Now comes my problem. I've been able to copy everything from the external hard drive using RecoveryMgr.exe which opens the WIM files and saves them to my C: hard drive under System Recovery Files. However it does not seem to work when it comes to putting in my old Thunderbird e-mails, contacts and such or in Firefox to restore my bookmarks, saved passwords.
View 1 Replies View RelatedI am trying to restore my computer because it launches into system recovery. After I get to the recovery options I tried to do system restore but it tells me there isn't enough space on the disk.
View 6 Replies View Relatednot A legel verison of window 7. wont to restore to factory setings.
View 1 Replies View RelatedI have tried a lot of things and I can't get system restore to work. I don't need to use it but I would like my computer to be working since there is no reason for this not to work. I just keep getting ComPlusStaging failed to obtain original copy from %systemroot%/registration all the time.
View 9 Replies View RelatedI have recently upgraded from Vista 64-bit to 7 64-bit. Before the upgrade I had installed and played many games (Battlefield 2 & 2142, FATE, Assassin's Creed, etc.) in full-screen mode with no problems.
Something seems to have happened after the upgrade however as now I am not able to launch some games and have had many difficulties with the others. I have updated the driver specific to my graphics card as well as the Catalyst ones and have checked all the other drivers for updates only to be told they were the most current.
On a related note, my Assassin's Creed is a digital download from EB Games. When I try launching it through DirectX 9 it asks me to insert the CD, and if I try to launch it by any other of the options, the CPU runs for about 5 seconds and then nothing happens.
I say nothing happens, but that's not true. A Windows Error Report is created roughly named AppCrash Assassin's Creed for each time I try to launch it.
As for the other games, FATE creates a process that runs in Task Manager, but nothing shows up on the screen, and occasionally Battlefield 2 does the same.
Is there something that I am missing? I am close to going back and doing a clean install of Windows 7 (instead of having the upgraded version) but would REALLY rather not have to re-install all the programs.
I have been have some problems with my HP dv 8500 laptop. It has vista on it. I could not get any windows updates. So I backed up my files to a flashdrive and did a system recovery. I have files on the flash drive but cannot transfer them back to the laptop. I would love it if someone could guide me through the process.
View 9 Replies View RelatedMy Windows 7 System Restore doesn't restore. It allows me to set them and tells me they've been done. But on the couple of occasions when I've wanted to use one, no joy. Yes I know I could possibly do it in 'Safe Mode' but that isn't an answer as to why I can't do it in regular mode?
View 2 Replies View RelatedSystem restore failed to extract the file. from the restore point. There was a disk failure during the restore. This might be caused by bad sectors on the disk. I get the same message, but with a different file name, with every restore point I try, and I have now tried all seven available restore points, going back to 30 Dec 2011. The computer was working perfectly until 3 days ago when it blue screened, and has not started properly since. It is a Corei5 with 4 GB RAM and is only 12 months old. I just dont believe the drive has that many bad sectors.
View 9 Replies View Relatedmy Windows 7 after restoring it to factory configurations. I installed Ubuntu 12.04, the installation smooth as butter, but after a few days of usage, the GRUB system screwed up. After a LOT of problems I managed to restore my Laptop to its default configuration. Then, I tried to restore my personal files with the DVDs I made, but when the manager finished, it only showed a folder with all my files in it! And it didn't give me any option to restore these files or something!
View 3 Replies View RelatedI lost 2987 emails by clicking on email tab in windows task manager All the emails disappeared so now >>??? wondering if Sysytem restore restores email as well with Win 7 are do I have to do like Ive seen ? Go to your documents folder and right click on the folder titled Mail the properties and then the previous versions tab.Click on a restore point from before it was deleted and click restore.
View 3 Replies View Relatedunable to access one of my hard drives. I went to disc manager and it showed the file system being RAW. I used autoruns and disabled autocheck and restarted my computer. Now when I go back into disc manager, it shows it as being Unknown and Not Initialized. I tried to iniatialze it and the error "The semaphore timeout period has expired."
View 1 Replies View RelatedI have an ASUS Rampage II Extreme MOBO, with the lates BIOS update (ver. 2101). When I boot the Comp, I can get into BIOS and what not with keyboard (logitech G-15-original one). Problem starts when I log on to Windows. It takes over 1 minute for me to start typing or even being able to use my keyboard. I have tried other ports, still the same. I have tried other keyboards, still the same. The only one that I am able to use it a PS/2 style keyboard. All my other USB Devices seem to start up and run ok, it's only the keyboard. Also, I have tried other USB ports on PC as well.I called ASUS, they were ready to RMA the MOBO for me, which I bought back in 2009! Then he said it could be a Microsoft issue..This all started when I switched to 2x120 SSD's in a RAID 0 Configuration, but was probably like this and didn't notice because I had to wait 3-5 minutes for the computer to start up. My computer will boot up and I can get on the web in about 15 seconds now, but can't use the keyboard...
View 7 Replies View RelatedI have downloaded skypeSetupFull.exe completely and saved. But when i try to install it by double clicking it. It is not initialising setup as there comes no setup wisard. How I can run the set up and install.As after double clicking it and clicking on yes to user account control the setup is not start. There is no problem of account control. Main problem is that installing wizard is not appearing.I want to know how I can run the setup and install setup successfully.
View 1 Replies View RelatedI am having the following system configuration
XPS L401X Base
Genuine Windows(R) 7 Home Premium 64bit (English)
Intel(R) Core(TM) i7-740QM Processor
6GB 1333MHz DDR3 SDRAM (1 x 2GB + 1 x 4GB)
640GB 7200RPM Hard Drive
Lately whenever i try to start my computer it pass the Dell Bios and then directly goes to the screen which states
Repair your system or Start windows normally When i chose repair system , it start downloading windows files and then launch the windows , but hung up at the sky blue login window with only movable cusor . When i choose to start windows normally it gives me BSOD momentarly ( hard to see the message) and then restarts again . i tried with the advanced boot up options like
repair my computer , all safe modes , restore to last good configuration but it does the same and hangs at windows loging sky blue window .I Tried to run the Dell PSA+ Diagnostic and it returns with 2000-0146 error . As per the Dell online solutions for this type of error ,I tried to reinstall the Hard disk but the problem still exist.
Using preinstalled Win 7 Home Premium 64bit on an HP 6813w Pavilion. The original hard drive, a Hitachi HDS721010CLA332 1Tb crashed.1) System Recovery discs was made along with a System Recovery with System Image disc.2) A more current System Image was made on an external hard drive.The Hitachi was replaced with the same model. Checked bios to make sure it was installed correctly.Under System Recovery, Image Restore, Select a System Image Backup there is nothing in the table to choose from as far as a source (disc drive or external drive).A) System Recovery (3 discs) has the HP preinstall file folder on the 3rd disc but is not read by the System Recovery program.B) Under System Restore, Image Restore, Advanced, it asks for a network or driver to be installed. That opens up the directory of C: which is the external hard drive. Under WindowsImageBackup the computer name is identified followed by three entries:[CODE]It seems to me the Recovery and System Restore discs are not functional. Am not a technical person but I have taken this as far as I know how at this point.Printed out all the instructions from HP and Microsoft to follow step by step but the failed discs will not allow me to move forward.
View 2 Replies View RelatedLiving is south FL can be a bitch when the rains come as there often is a ton of accompanying lightening that plays havoc with the electrical system, even though I have surge protectors inside and outside the house. We just had some very heavy rains with lightening and my computer shut down several times, but I could restart it each time...except for the last time when Windows wouldn't startup. At that point, Start Up Repair came into play. Although I routinely backup on an external drive, of course I never did it this month-DUH!Results from SUR were error free (error code=0x0) on all the parameters tested, however there were the following error codes reported:"Unspecified change to the system configuration might have caused the problem." Failed: 0x1fRepair Action: System FilesFailed: x490There were more options to select for a recovery task, but I didn't try them as they didn't seem to be as salient as the two above.
View 6 Replies View Relatedive got a sony vaio laptop that worked fine until i dl a pdf file and tried to view it, the machine froze and i had to reset it, since then it will not boot, booting from hd it gets to the windows logo then flashes up a blue screen with text on it that stays on for 1 sec then it resets and starts again.ive tried the sony recovery tools that shows no partitions on the hd, system restore says there are no restore points.
View 13 Replies View RelatedI am using Windows 7 Professional (64-bit) 6.1.7601 Service Pack 1. I used System Restore to undo system changes to my computer. I want to undo this System Restore operation, but System Restore says there are no restore points.
View 1 Replies View RelatedI recently did a system restore and when I started it up some of the documents are gone from the desktop. retrieve them they where word files .
View 1 Replies View RelatedI can create restore points. I just can't restore from them. I get this message:
System restore failed while restoring the registry from the restore point. The restore point was damaged or was deleted during the restore.
I have tried restoring in Safe Mode.I have deleted all restore points and turned off sys protection, rebooted and turned System protection back on.I have uninstalled Kaspersky (my system protection).I have made sure Volume Shadow Copy is started.
I am using Windows 7 Professional (64-bit) 6.1.7601 Service Pack 1. I used System Restore to undo system changes to my computer. I want to undo this System Restore operation, but System Restore says there are no restore points. How then can I undo this?
There were many, many restore points before. I have recovered the entire contents of C: with Recuva. What do the restore points look like?
I want to have a Factory Reset of my computer. In order to launch a System Recovery, I need to create Restore Discs. When I launch the Recovery Disc Creation, it says:"This computer does not have a burning drive, which is required to make DVDs. Please contact HP Support for asistance."My computer did not come with a build in CD Drive. Even plugging in a USB CD Drive will not make creating the discs possible. So. I ask you. How can I reset my computer to Factory Condition?
Computer Specs:
Windows 7 Home Premium (64-Bit)
Model: HP Pavillion dm3 Notebook PC
edit: This notebook came with a Recovery Partition built in.
Did a system restore in Windows 7 and my dual boot system (Windows 7&XP) won't boot. It's looking for a boot device. When I put in a Hiren boot 10.6 disk, the dual boot option is one of a number of alternatives, and it allows me to get into my pc. How can I get back to having the system work like it did before? So it boots to the dual boot option without Hiren.My SSD drive is the main drive for Windows 7 &XP. It has two partitions.
View 1 Replies View RelatedHow to Automatically Create A System Restore Point at Startup ?
View 0 Replies View RelatedI tried to do a routine (once a year) chkdsk via the command prompt Code: > chkdsk /r
> shutdown /r /f /t 1 . And upon the reboot, all I get is a black screen, no cursor, with ~4 rows of rainbow, garbled pixels at the very top of the monitor (certain pixels occasionally change colours). This occurs before the windows splash screen. I have left the computer as is, hoping it will eventually boot on its own with no luck. This was just a routine check. Some more information, I dual-boot with Ubuntu. I can mount and access the windows partition from Ubuntu, and I even ran ntfsfix in Ubuntu (which has some analogous functionality to chkdsk), but it didn't notice any problems.
Windows 7 N&S center is really slow. I have no idea what's causing it.Symptoms not present when I connect to my wireless router.But when I tether (get a connection from a USB device) the N&S Center stops responding for about 10 minutes.At some point, it will come up with the "Public Network?" box.How can I debug this?Even after the network is initialized, the N&S center is still very slow.I assume it's doing some automatic something or other that keeps pinging this, that or the otherThe USB device would serve an internet connection that has a reasonably high latency.Lots of network tools seem to slow down, especially while the connection is configuring itself. This is probably because all of the services involved are interlinked somewhere, and are waiting on the same mutex to be released or something.
View 3 Replies View RelatedThe other day I was trying to figure out what coral paintshop pro meant by security key, so I googled it. Something popped up and asked me if I wanted to download, and I wanted to say no, but my laptop's mouse is too sensitive at times, so I accidentally clicked yes. My computer automatically shut down right after that. Every time I turn it on now, it goes straight into System Repair and it doesn't work, it says it cannot repair. I've tried System Restore, but since that doesn't get rid of the documents that have been downloaded, it isn't helping either. My computer won't even let me enter any form of Safe Mode, it just goes straight back to System Repair.
View 3 Replies View Related