Skipped Vista, so I'm just learning to hate permissions in Windows 7. How do I enable the two other XP machines in the workgroup to access an entire drive on the Windows 7 machine? I've been able to set up access to individual folders (not even sure how I did that), but not to an entire drive - in this case data drive D.
View 9 RepliesIt is easy to share a folder with Everyone, or to share it with other user accounts on the same computer, but how can I share a folder with a specific user account on ANOTHER computer in the workgroup?Reason: in my neighborhood, four friends are connected by cable to the same router, and we all belong to the same workgroup. Each computer has a folder (named "public") that we share with everyone else, but I also want to have another folder (named "private") that I can share with only other computers in my apartment, but not with my friends (on other apartments). How can I do this?
View 3 Replies View RelatedI'm helping out my wife's friend who has a Dell Dimension 4700 with Windows Xp. So her motherboard fried and wanted me to transfer her files over to a new backup hard drive. So I took the hard drive out and hooked it up to my computer running Windows 7. I can see the files and everything just fine but when I click on a folder I get the "You don't currently have permission to access this folder" Click continue to permanently get access to this folder. So I click continue and it wants me to go to a security tab and change the owership from Unable to display current owner to Admin. The problem I'm running into is that it wants me to do that for every folder and file. Is their a way that I can do a blanket ownership over the whole drive, or is their a way to transfer the files without having to take ownership of the drive so my friend can just copy and paste the files with no problems.
View 1 Replies View RelatedI have been having issues with the booting of my c drive. I just installed a fresh copy of Windows 7 64 onto a fresh hard drive and it is booting. What I want to do is copy over the entire contents of my original C drive over to the new drive. I have a second computer to do this on and am not sure how to do it. I doubt that dragging and dropping will copy all the hidden and system files, which is what I want to do.
The reason I don't want to simply make an image of the first drive and restore that is that the original drive does not boot AND contains a system partition that I don't want to bring along. I am hoping to marry the bootability of the new drive with the files and information on the original drive.
Is there a method to link my entire C:/users folder to another drive with out the need to reinstall anything and have things work perfectly as the way they were? What I want is all the read and writes to be done on another drive.
View 7 Replies View Relatedi just bought a new computer running windows 7 home edition. my question is, can windows 7 make an entire image of my hard drive including (and this important) the recovery partition? If It can can anyone please tell me how. i need to have a complete backup of my hard drive in case of hard drive failure.
View 1 Replies View RelatedCurrently my Windows 7 is on the C drive, now my question is this: Is there a way I can say put in a SSD, then copy my entire windows and the Programs Files, Program Files x86 and the users folder to it, then switch my old HDD to the D drive and the SSD to the C and have it work just fine? Is there an easy way to do this? or will it require me to reinstall windows to do it? Been thinking about getting a 120 GB ssd for my os/program drive, and using my 1.5 tb drive as storage.
View 3 Replies View RelatedOkay, so I've set up network drives before going from XP to XP.. but a long LONG time ago and can't really remember what I did. Looking through Windows 7 also, it's all changed and a bit confusing :$.
I have two computers.. my main computer running Windows 7 64bit, and my server computer is running XP Pro 32bit. I want to have my server's 250GB drive (the only drive in the computer) accessible via my main computer as if it were plugged in.. so under 'my computer' it'll show something like "Server X:", X being the drive letter giving to the server's drive, and when I double click it I'll see Windows, Program Files.. everything and un-restricted.
Could anyone help be get this sorted and set up?
If anyone has links to a tutorial / step-through that would be very much appreciated.
I need my server (localhost) computer up and running as soon as I can as it's for my home business.
I'm going to use Windows 7 for my media center PC. Its going to be a machine without a monitor, I'll just stream from extenders and control it with logmein.com for now. I've currently got 3 XP machines, I like to be able to share the hard drives and map them on my other PCs to easily drop files onto them. But I've noticed since Vista, I just cant access those hard drives. I try to map it, and usually the PC shows up but nothing is there to select. At the most, my wife's Vista laptop has allowed me to access her Public folder but thats it. Its got the be one of the biggest annoyances with vista for me. We have no firewalls or virus software (i just hate it..id rather reformat than sacrifice PC performance), we use the windows built in firewall but thats it.
View 5 Replies View RelatedHave Dell Dimension 8400 I fixed up with new disk and 4g ram. Put a clean Windows 7 32 install on the new 500g disk, and formatted the old 250 as a spare disk. Nice box, My main machine is a Windows 7 64b Ultimate box - I can network to an XP SP3 box, and the Dell 8400 main disk (made a folder there and shared it). But the Dell box just won't allow any connection to that second disk or a folder in it. All machines on same workgroup. AFAIK "HomeGroup" stuff is all turned off. I have a user by the same name on both Windows 7 machines... have REPEATEDLY gone over the network settings for private/public - and all seems correct. Is there something about sharing a non-main disk? I just want a drop box on this Win32 machine as it will ultimately become a development server for MS SQL Server 2008 express.
View 5 Replies View RelatedHow do I get one Windows 7 computer to share out it's internal blu-ray drive and get another Windows computer to see it as a blu-ray disk instead of a folder? I want to make the shared disk drive be able to auto-play on a remote computer on my network.
View 8 Replies View RelatedI use a Drobo and I used to have it map on My host PC using letter I: but since it was causing drive letter conflicts I changed the drive letter to Z:. Ever since I did that my Drobo will lose its drive share every time restart. I can share it back out and it retains the individual folder shares I set up. But this was never and issue before. Is there a way to make a drive letter a permanent share or make a startup script to share the drive letter?
View 3 Replies View RelatedI've been trying for a couple hours to look for tutorials and none of them have helped me out.. I can't network share my external usb 1tb hard drive?
View 1 Replies View RelatedComputer 1
Username: AAA
No password
AAA is an administrator
Computer 2
Username: AAA
No password
AAA is an administrator
Computer 3
Username: BBB
No password
BBB is an administrator
Computer 4
Username: CCC
No password
CCC is an administrator
There are 2 drives on all computers: C with Windows 7 Ultimate x64 installed, and D. All computers are connecting to the same router. What should I do if I want Computer 1 to access drive D of Computer 2 and Computer 2 to access drive D of computer 1 while Computer 3 and Computer 4 can't access any other drive apart from their own. I have fully access to all computers' setting.
I have a 128GB SSD for booting and games and a 1tb hard drive for storage. Because my OS is on my boot drive, the location for my videos folder is on the boot drive and I don't want to store my movies on my boot drive because of space constraints. I'm using homegroup to stream movies to my mother's computer. Is there any way I can stream videos from a folder in my storage drive or any alternative method for changing the root destination of the videos folder in my C drive?
View 2 Replies View RelatedI'm currently having issues sharing a full hard drive from my windows 7 machine to my windows XP machine.
No matter what I try, when I try and open this drive on my XP machine I get the error Quote: p4pcmedia is not accessible. You might not have permission to use this network resource. Contact the administrator of this server to find out if you have access permissions.
Access is denied. I have set up the sharing rules in Windows 7, turned off the firewall and set the permissions to be read/write for administrators and everyone, which is the same permissions the default shared "users" folder which is accessible.
XP: Physical to Virtual & Share Drive w Host? Disk2VHD vs VMWare P2V? Physical-to-Virtual - Wikipedia, the free encyclopedia My Thinkpad X61T with recent 8GB DDR2 Upgrade:I have an XP Pro 3 instance on a HDD able to use 2.99 GB RAM. I can backup bunch of data files to make size smaller.I have a Win 7 x64 instance on another HDD that can use most of the 8GB RAM. Now, I'd like to do two things:
1. Virtualize the XP instance and create a Virtual Disk/ Virtual Machine, with all of the Programs & Settings intact.
2. Run this XP on top of Win 7 x64 Host and "Slowly" Migrate Files/ Settings/ MetaData etc. from GUEST XP to HOST machine.I'd prefer to be able to SHARE "the C: or Boot Drive" between the GUEST & HOST machines (as it is mounted/ running) and be able to COPY some Specific Files/Folders using ROBOCOPY/ RICHCOPY to maintain attributes that could/ easily get lost with any other copy method.Thoughts/ suggestions, experiences, comparative reviews on using Software/ Tools out of the above listed page and how could go about doing both the things.do let me know UPDATE: Some advise/ suggestions I got on another forum was. Quote: If it were me, I'd use DISK2VHD on the XP hard drive, copy it to the Windows 7 machine, install XP Mode, and fire it up like that.An alternative, in some ways better, would be to use VMWare's P2V converter on the XP machine, install VMWare Player on the 7 machine, and load the virtual machine on there.If you're just worried about docs / settings / etc, I'd suggest skipping virtualization and just use Windows Easy Transfer to make a clean break. I've used VMWare and Virtual PC a LOT in the past, but not used in a long time. I know some functionality for items 1 & 2 exist but wanted to get a comparative idea between the various options LISTED in the Link. I guess I was a little out of touch when I realized so many products existed just to do P to V. I remember only VMWare had that for a while.For me the ability to "share" & "copy" these files is critical. PS: Also, I may or may not have enough storage on the Win 7 x64 drive so I'll have to run the guest VM from a USB 2.0 HDD. Would that work okay? For now, if the suggestion give by someone from the other forum still holds. What are the pros vs cons of Disk2VHD vs VMWare? (Given the specifics of my scenario?)Esp Sharing Drive & Copying using RoboCopy/ Richcopy (To maintain Modified/ Created Dates .. Wish there was way to keep Accessed Date)
i can't share full hard drive in windows 7 local network
View 1 Replies View RelatedI have two machines running Windows 7 pro in a workgroup. PC A RDP's to PC B over port 3398 and has been working for months. As of this week the connection has failed access denied over port 3398. Nothing has changed as far as I know.
View 6 Replies View RelatedI have a Laptop that I just installed Windows 7 on, and an XP machine. All is working well, including the networking, but I have what might be a silly question.
From the XP machine, why does the 7 machine not show up when I "View Workgroup Computers". I can get to it when I look in "My Network Places", but when I View the Network Computers, only the XP machine shows up when I'm on the XP machine.
The XP machine shows up on the 7 machine when I "View Network Computers and Devices" FWIW.
I'm helping someone with there Windows 7 Professional.They can't update it or get certain features to work. I know it is because they are on an old Work Domain.They no longer work for that company. But the Laptop is there's.I went to System and "changed settings" under "Computer Name Domain and Workgroup settings".I changed from "Work Network" to "Home Network".After restarting, ALL of there configurations and settings were gone. Outlook, ACT!, etc needed to be setup again. But the computer was able to access the features that they needed.Apparently the user account that we were using to log in into, was no longer available.I did a system restore to right before I changed to Home Network.How do I change to "Home Network" from "Work Domain" while still keeping ALL user settings, but getting rid of the lockdown that the Domain Policies Enforced?
View 2 Replies View RelatedI am trying to set up a workgroup between two Windows 7 Pro computers over a wifi connection. I have set the workgroup name to be identical on both machines (Lastname-Home), but neither machine can see the other. Network discovery and sharing are turned on. From my googleing and forum searching (here and on other forums) all I can find is people saying that if the workgroup names match you should be able to see the PCs.
View 1 Replies View RelatedDoes anyone have experience with windows 7 (32) not allowing the network workgroup name to match a username? Do to some existing procedures we would like the username & workgroup to be the same. This works fine on XP machines but not on the Windows 7 machine.
View 1 Replies View RelatedI'm able to ping both ways and able to see another workgroup Vista machine from the XP side but not my laptop Vista.No antivirus other than MS Security Essientials, no third party firewall, removed all malware TSR's.Have files & Printer sharing turned on and double checked the workgroup BUT when I tried to change the computers name I get a "error occured validating..." message.
View 3 Replies View RelatedI cannot get this to work for the life of me. I have searched this forum, and others.
-I have set the workgroup identically on my windows 7 machine and my 10.6 MBP.
-I CAN smb to my windows 7 machine successfully.
-Neither my windows 7 or mac os x recognize one another in their respective network "browsers"
-With iTunes open on both machines, it successfully recognizes the libraries.
I am not a networking genius, but I'm fairly literate if someone could help me out, please.
This could be a whole separate issue, but even when connected to my windows 7 machine through VPN, the machines don't show up on their respective network "browsers"
I could 'see' my shared XP machine and my MacBook from my Windows 7 computer over my wireless network last night be cannot see them now. I can 'see' the Windows 7 from the XP machine on Workgroup computers but I cannot 'see' any computers from my Windows 7 network now.
I have seen another post like this but the solution there was to buy another wireless router but I just bought a new Netgear 11n router and it is working fine for Internet access.
I have had a Windows workgroup for years, linking PCs and Macs as well as a Linkstation Network Drive through a Time Capsule Router/Hard Drive Combo. Immediately after upgrading from Vista Business to Windows 7 Professional on my Sony Vaio VGN-Z750D, I can see the Time Capsule and MacBook but can not access the MacBook Pro. I am able to access the Linkstation and the Time Capsule. However, the system does not ask me for a username and password when I try to access the MacBook Pro, and I get an error message that Windows cannot access the MacBook. The problem seems to be on the Windows 7 end, for I am able to access the Sony on the MacBook Pro.
The workgroup name is the same on all computers. I had to reset the workgroup name on the Sony, because for some reason the Windows 7 upgrade renamed the workgroup name to WORKGROUP without asking. I reset it to the name used on all our mchines. The only variable changed is the Windows 7 upgrade.
How to View and Change the Workgroup Name in Windows 7 ?
View 0 Replies View RelatedI have a WIN7 Home Prem and an XP in a network workgroup.I have an HP offricejet J6450 an an HP laserjet1320 directly attached to the WIN 7 machine. Printer sharing is ON for both. The XP can access shared files on WIN7 and can use the J6450 printer. But I cannot get access to the Laserjet 1320.
View 3 Replies View RelatedI've added a new laptop to my home network (now 3 computers, all of them with win 7 ultimate 64) . I didn't use home group because i don't like it, so i configured everything manually and everything worked great, file sharing. printer sharing, everything. And then I added a password to my user on the new laptop to protect it and the sharing between the laptop and the two other computers stopped working. when i try to access the laptop from another computer it reports i have no access, and when i try to access one of the computers from the laptop it asks for a user name and password.i uninstalled firewall - didn't help. reinstalled. i removed the password - problem solved. added password again - problem returns.
View 3 Replies View RelatedI changed the domain on my work laptop to Workgroup so I could print on my local LAN at home and now I can not login using my user name and password. My laptop has a PGP total disk encryption. I can log in on the first PGP login screen. After that, Windows 7 login appears and I can not login using my usual name and password.
View 5 Replies View Related