Apparently the CPU has been overclocked, but tends to revert back to AMD Phenom II X3 720 from time to time. The CPU is inserted in the ASRock N68-VS3 UCC motherboard. Does it reverting back means that the overclocking procedure is somewhat unstable or is it just a graphic glitch? Also, how better is a AMD Phenom II X3 720 to an AMD Phenom II X4 20 both @ 2.8 GHz?
View 2 RepliesProblem Description: I was using Windows 7 (64 bit) and having difficulty operating some CS4 applications even when I changed the compatibility settings. I decided to clean install the 32 bit version of Windows 7 to see if this would remedy the problem. I had purchased the Windows 7 Professional package so both discs were available to me. The CS4 situation did not improve. However I am not concerned with the CS4 issue at present
what I would like to do is revert back to Windows 7 (64 bit) and I don't know how.
I went from Vista Ultimate to Windows 7 (64 bit) to Windows 7 (32 bit)
and now I want to go back to Windows 7(64 bit) is this possible.
i had a terrible problem with a big quantity of extremely important photo files; i formatted a pen drive by error and now i cannot access my photos; the card in the camera card filed as fat; my computer only files in nfts; a window popped up telling i had to format; i didnt realized the risk and formatted; now i cannot open the files because for sure they now are nfts; how could i revert the mistake i did?, there should be a way of reverting from nfts to fat, isnt it?
View 4 Replies View Relatedi have a eee pc 1000 ha. the operating system is win 7 now, but performance is not good, slower. so, i want to back win xp again. it has no cd drive. hw can i back / reinstall win xp on it?
View 1 Replies View RelatedFew days back my os stopped to start in any mode and shows a black screen.so decided to re install windows and installed windows 7 ultimate 64 bit os.After a few days i came to know this is a pirated copy .so now i have to revert back to pre-installed of laptop.i have a recovery cd from samsung and have a partirion named SAMSUNG_REC(E).
View 9 Replies View RelatedI am going to buy a Windows 7 laptop, but I have had experience with Windows 7 and personally hate it, so when I get this laptop I want to revert back to Vista operating system... How do I do it? Can the Vista be downloaded from Microsoft's website, or do I need to buy Vista in a CD?
View 24 Replies View RelatedI am in a problem here. A day before yesterday, I was messing up with folder permissions and unfortunately I messed up pretty badly.
The problem is I changed the folder permissions of C:Program Files and C:Program Files (x86) to Deny for all users. These included
Authenticated Users
System
Administrators
Users
I was logged in with an Administrator Account. Now the problem is I cannot access the above folders with any user. All my applications installed in those folders do not work.
I tried several solutions available on the net like changing ownership, using THE Administrator account, etc but to no avail and these folders are still locked.
Is there anyway I can access these files or shall I resort to the ultimate step i.e. re-install windows.
I've accidently set another .cnf filetype to be known, as well. It's just so aggravating to see them have an icon as if they're good to open..how can I make them to open with nothing once again..?
View 9 Replies View Relatedi was wondering if it is possible to revert windows 7 back to the first time setup i know this was possible on xp (without loosing installed programs) can this be done on windows 7
View 4 Replies View Relatedi have installed a new desktop customization tool in my laptop running Windows 7.the default shell got replaced,and now i can't see the start menu, my wallpaper isn't there,the right click on desktop doesn't work,all in all i am stuck.now i want to revert back to the default windows shell,i don't want to format my computer because i have so many softwares installed.
View 9 Replies View RelatedI tried srf/scannow imagres.dll and icon cache already, and I still get this: from a pack I installed I just want to get rid of these ugly Icons
View 1 Replies View Relatedwell scenario is I got my new dell 15r laptop with windows 7 basic loaded yesterday.. so backed it up and wanted to put my old PC's windows 7 ultimate version on it. I installed it, while installation it allowed to have only 4 partitions.it already had 2 partitions1) Recovery - 15gb2) something i forgot ... some 40MBso i made a partition of 125GB for OSand rest of unallocated space ie some 660gb could not be allocated in more than one partition so i let it be unallocatedso after installtion got completed and OS started i went in disk management and tried to make that unallocated space of 660GB in 2-3 partitions.but it converted all my previous partitions also to dynamic. even recovery partitions.ow do i go back to basic partitions?? particularly about that recovery partition and my C: (OS partition) ??
View 7 Replies View RelatedSo i returned to my work computer after lunch and the resolution had been changed to 800x600, very odd.Now i have spent 2 hours trying to get back my resolution to the 1680x1050 that is was before but i still can not choose anything higher then 1600x1200 under Screen Resolution settings. The one with the correct ratio i can choose is 1280x960 and i'd like to bigger one back.I have updated the driver for my graphics card (ATI Radeon 3000 Graphics accoridng to Device Manager). I have updated the driver for the Monitor (HP LE2201w), but the monitor still shows up as Generic Non-PnP Monitor under Device Manager and now i am out of ideas... I really have no idea what the hell happened when i was gone.(And yes, the computer was locked so it wasn't someone else changing something)Uninstalling the driver for the Generic device does nothing, it pops back up again after installing the correct display driver, or after a restart. It's like the display driver i downloaded from HP is not being installed, no idea why.
View 8 Replies View RelatedI don't remember What I did to get it like this but I've so many things and none seem to work. why my folder icons look like that.
View 1 Replies View Relatedi restored my computer to windows xp restore point from windows 7 , now have realised i need some files in windows 7 my documents and want to go back to win7 ,how do i do that any special software needed?
View 3 Replies View RelatedI have a friend who just installed Windows 8 Release Preview onto his computer, but what he was trying to do was install it as a dual-boot with Windows 7, but that didn't work. What ACTUALLY happened was Windows 8 installed as a primary OS, but it apparently didn't delete any of his data; it just replaced the Windows 7 OS with Windows 8, with its Metro UI and such.Is there any way to uninstall Windows 8 Release Review and revert back to Windows 7 without deleting any of the data on any of the hard drives?
View 9 Replies View RelatedI currently have a AMD phenom x4 currently clocked at 3.2ghz i want to overclock it to a 3.4ghz can anyone help me do this ? i know how to do the bios by manual n stuff but when it comes to the multiplyer or can anyone help me overclock this and i also have to do a voltage tweak if this is right?
View 5 Replies View RelatedI have an AMD Phenom II X3 710 2,5 GhZ, and after fiddling around some in the device manager I notice that the "coprocessor" is unknown, and I can't find drivers for it.I've an nVidia 8200 chipset with plans on changing to AMD 890GX/SB850.As a sidenote I'd actually also like to hear the experience of you wise fellows if any has tried changing motherboard without reinstalling windows.
View 9 Replies View Relatednew world record for 3dmark
amd phenom ii overclocked to 6.5ghz
Internet - amd phenom ii overclocked to 6.5ghz - new world record for 3dmark
i want one of these chips so bad, waiting until the ddr3 version is out then gonna grab a new mobo as well me thinks as long as the ddr3 is black version.
At some point maybe trough windows update or other such event my processor drivers have been corrupted. My hard hard drive is constantly writing data at processor folder on windows as can be seen on attached screenshot of resource control panel. This takes up considerable amount of procressing power too. I haven't found any newer drivers from internet as haven't windows either. Disabling current drivers doesn't seem like great idea either.
Problem arised in updating to service pack 1 of windows 7, but I think it has been around for longer as hard drive has spinned at intervals before the update too when there hasn't been any processies going on, but considerably less often.
I could allways be wrong about the cause as I have two Radeon 5500 graphics cards on system but as I updated those drivers today to no avail, so I doupt it. Offcorse it could be million other things too but hard drive writing really suggests processor drivers.
System info
Windows 7 Profesional 64 bit
AMD Phenom II X4 955
I have a AMD phenom II x6 1090t, with a Arctic Cooling Freezer 7 Pro rev 2 cooler and the thermal compound is applied properly. I also have 5 chassis fans.
On idle I normally have temps of 30-38 and when I'm gaming (GTA IV, LFD, COD MW2, BLACK OPS etc) I only hit 50, but when I was playing GTA IV, I finished playing and checked my temps and core temp said I hit 112 Celsius, however I didn't hear the computer get noisy or anything. I was wondering if this is legit or just a false temp because I've heard a few bad things about core temp.
When I use prime95 and other tools I only hit like 50 D:
Is the Phenom II x4 940 compatible with the Dell Zino 410 computer?
View 2 Replies View RelatedOverclocking & Unlocking AMD Phenom II X2 550 Black Edition?
View 7 Replies View RelatedIm new at overclocking, i wanna know how to overclock so that i don't screw up my computer D:
i feel as if this computer can go farther then its limit right now, so that's why im asking. I just bought this computer 1 year ago ( 2011 )
Operating System: Windows 7 Home Premium 64-bit (6.1, Build 7601) Service Pack 1 (7601.win7sp1_gdr.120503-2030)
Language: English (Regional Setting: English)
[Code].....
Will a MSI 890GXM-G65 Micro ATX AMD Motherboard be a good choice,for the AMD Phemon II X6 1100T Black Edition 3.3GHz 3.7GHz Tubro socket,AM3 125W Six core desktop processor?
View 2 Replies View Relatedi will be using a GTX 550 ti?
View 2 Replies View Relatedi have an asus laptop when i got it it had windows 7 32 bit it ran great bet computer ive ever owned but it took a fall and the harddrive broke i got a new one and had to rebuy windows everyone told me to get 64 bit so i did but now my usbs are not working and my speakers dont work same with videos to oh and during start up it lags real bad and can take almost 20 min to start but some times it takes only seconds ive looked at the main drivers they are all in 32 bit and ive done all the updates in the world for it but it still dont work i want to go back to 32 to see if i can get it running
View 5 Replies View RelatedI loaded WIN7 Home Premium onto a HP Notebook with 2 gig RAM, 60 gig HDD, and 1.67 Intel CPU. Not running well and want to revert back to XP which is fine for our use. In trying to make room on HDD, I deleted windows.old file. So my question is how do I reformat HDD and get back to clean machine without anything loaded and then load XP. Tried to install with XP disc but it would not let me. have Win7 on desktop and love it but it has the horsepower to run it like it should be run.
View 2 Replies View RelatedWin 7 Professional with all current updates an patches that Windows update wanted installed. IE 9 stopped working, it would just flash on and then off.
Followed a MS guide that was to FIXIT and the program failed. Tried Method 2, manual reset of IE options, In the control panel I clicked 'Interent Options' nothing happens. Never get to the reset button I was to click.
uninstall IE9. Could not do it via the Windows Update as this was installed as part up the original installation. Followed the other open to turn off IE 9 which is suppose to remove IE9 and then Windows Update can reinstall it. That worked and I now had a flashing IE8. The Update failed though. MS forum says to go to the IE9 site and download it myself. That failed.
Now was told do a recovery. That failed, not surprising as it was a restore point created by one of the earlier attemps to fix the problem. An older backup from March was also an option and and that failed saying is was missing files needed.
Tried a number of other suggestions and something via msconfig that I have forgotten now. It was 2 AM and was getting rather loopy and frustrated. I decided to follow the steps again that seemed to at least get me IE 8 and did the turn off again. That failed and now I cannot boot as it is stuck trying to revert the computer back to the state it was in before I tried the function. Safe mode said it did a restore and had me started though. I tried to restart normally and I was right back at the reverting problem again.
I REALLY DO NOT want to do a system reinstall but I am at a lose where to go next.
I had a pre release of Windows 7 and was adding the Windows 7 Ultimate but when I added it all of my settings as far as the desktop and programs did not transfer over. I did save everything, is there a way I can revert to my old Windows 7 pre-release? Or an easy way to have my desktop, documents, etc on my new version?
View 3 Replies View Relatedhow tricky it is to keep a clean install on Windows I'm wondering if i could ask some advice?
I will have the OS and programs on the ssd, let's call that c: and data on a regular hd, d:
If after time my c: has become bloated with appdata, unused folders in the users folder etc. How can I revert c: back to it's original state without changing d: ?
Can I do this with a restore point, or do I need another piece of software?