AMD Phenom II X4 955 Drivers Corrupt?
Feb 25, 2011
At some point maybe trough windows update or other such event my processor drivers have been corrupted. My hard hard drive is constantly writing data at processor folder on windows as can be seen on attached screenshot of resource control panel. This takes up considerable amount of procressing power too. I haven't found any newer drivers from internet as haven't windows either. Disabling current drivers doesn't seem like great idea either.
Problem arised in updating to service pack 1 of windows 7, but I think it has been around for longer as hard drive has spinned at intervals before the update too when there hasn't been any processies going on, but considerably less often.
I could allways be wrong about the cause as I have two Radeon 5500 graphics cards on system but as I updated those drivers today to no avail, so I doupt it. Offcorse it could be million other things too but hard drive writing really suggests processor drivers.
System info
Windows 7 Profesional 64 bit
AMD Phenom II X4 955
View 3 Replies
ADVERTISEMENT
Jun 6, 2011
How do I uninstall the problem drivers? I have been unable to uninstall them in the driver details. I can see them but can't uninstall.
View 3 Replies
View Related
Dec 23, 2011
This happened when I was booting today after turning it of last night after using it successfully since I bought it.The AHCI Drivers are corrupt.Windows won't load, it is stuck on the load screen.Trying to repair windows using the various F8 options doesn't work because they won't load either.Even the recovery partion won't load, it's stuck on the Acer E Recovery screen "please wait" and it is stuck for several hours on this.Now, in BIOS, when I change to IDE mode, it will load the various F8 options like trying to fix windows, but the problem doesn't solve itself. Also, the recovery partion does load, but it only gives me an option to install everything to factory settings, not just reinstall windows. However, Windows 7 won't actually boot on IDE mode, so I can't actually get into Windows 7.Therefore, my AHCI drivers are corrupt while the IDE ones are fine. How do I install fresh AHCI drivers to fix my corrupt ones from a USB stick? I do not have a windows install disk, it is all on the recovery partion/recovery disks
View 9 Replies
View Related
Mar 27, 2011
I currently have a AMD phenom x4 currently clocked at 3.2ghz i want to overclock it to a 3.4ghz can anyone help me do this ? i know how to do the bios by manual n stuff but when it comes to the multiplyer or can anyone help me overclock this and i also have to do a voltage tweak if this is right?
View 5 Replies
View Related
Mar 27, 2011
I have an AMD Phenom II X3 710 2,5 GhZ, and after fiddling around some in the device manager I notice that the "coprocessor" is unknown, and I can't find drivers for it.I've an nVidia 8200 chipset with plans on changing to AMD 890GX/SB850.As a sidenote I'd actually also like to hear the experience of you wise fellows if any has tried changing motherboard without reinstalling windows.
View 9 Replies
View Related
Jan 26, 2009
new world record for 3dmark
amd phenom ii overclocked to 6.5ghz
Internet - amd phenom ii overclocked to 6.5ghz - new world record for 3dmark
i want one of these chips so bad, waiting until the ddr3 version is out then gonna grab a new mobo as well me thinks as long as the ddr3 is black version.
View 3 Replies
View Related
Nov 25, 2011
Apparently the CPU has been overclocked, but tends to revert back to AMD Phenom II X3 720 from time to time. The CPU is inserted in the ASRock N68-VS3 UCC motherboard. Does it reverting back means that the overclocking procedure is somewhat unstable or is it just a graphic glitch? Also, how better is a AMD Phenom II X3 720 to an AMD Phenom II X4 20 both @ 2.8 GHz?
View 2 Replies
View Related
Jun 9, 2011
Windows/system32/drivers/ql2300.sys missing or corrupt shows it after boot What can i do? I haven't got that file...
View 6 Replies
View Related
Jun 15, 2011
I have a AMD phenom II x6 1090t, with a Arctic Cooling Freezer 7 Pro rev 2 cooler and the thermal compound is applied properly. I also have 5 chassis fans.
On idle I normally have temps of 30-38 and when I'm gaming (GTA IV, LFD, COD MW2, BLACK OPS etc) I only hit 50, but when I was playing GTA IV, I finished playing and checked my temps and core temp said I hit 112 Celsius, however I didn't hear the computer get noisy or anything. I was wondering if this is legit or just a false temp because I've heard a few bad things about core temp.
When I use prime95 and other tools I only hit like 50 D:
View 2 Replies
View Related
Dec 10, 2011
Is the Phenom II x4 940 compatible with the Dell Zino 410 computer?
View 2 Replies
View Related
Apr 24, 2011
Overclocking & Unlocking AMD Phenom II X2 550 Black Edition?
View 7 Replies
View Related
Jun 21, 2012
Im new at overclocking, i wanna know how to overclock so that i don't screw up my computer D:
i feel as if this computer can go farther then its limit right now, so that's why im asking. I just bought this computer 1 year ago ( 2011 )
Operating System: Windows 7 Home Premium 64-bit (6.1, Build 7601) Service Pack 1 (7601.win7sp1_gdr.120503-2030)
Language: English (Regional Setting: English)
[Code].....
View 2 Replies
View Related
Jul 26, 2011
Will a MSI 890GXM-G65 Micro ATX AMD Motherboard be a good choice,for the AMD Phemon II X6 1100T Black Edition 3.3GHz 3.7GHz Tubro socket,AM3 125W Six core desktop processor?
View 2 Replies
View Related
Sep 3, 2012
i will be using a GTX 550 ti?
View 2 Replies
View Related
Apr 7, 2010
"windows 7 setup.exe corrupt file the file or directory is corrupt"I'm trying to install 7 32bit OEM Home Premium with the legit bought holographic CD (not a burned image of any kind) onto a Gateway laptop with a brand new hard drive.I was getting this error installing the OS the regular way booting to the cd and installing from it, so instead I copied the contents of the cd to a freshly quick formatted NTFS partition on the new laptop hard drive, then used bootsect and diskpart to setup the disk. It boots just fine and also gets the same error installing straight from the hard drive.
View 9 Replies
View Related
May 5, 2012
when checking the disk, i got the following message:"windows resource protection found corrupt files but was unable to fix some of them." it mentioned a log that was saved (CBS.log), though i'm not sure what to make of it.what can i do to fix this? i have a lot of data on here that i don't want to lose. the computer does seem to be working mostly ok, but i did just get a BSOD and the above message.this is Windows 7 Pro, 64-bit. and i ran malwarebytes and kaspersky but they came up clean.
View 8 Replies
View Related
Jul 11, 2012
My new work computer, running Windows 7 is now unable to install software. I get various error msgs towards the end of installations. Usually some component or dll cannot be found. Aside from this inconvenience my system seems to be running smoothly. Our IT support guys have examined the system and have determined that my registry has become corrupt. They want to take my system and reformat it, and also run some intense hardware diagnostics. This is the second time this has happened in two months. I suspect these guys are just taking the easy option of reformatting rather than actual trouble shooting.
View 9 Replies
View Related
Mar 19, 2011
I just built my first computer and was happy to turn it on. When I tried to install Windows 7 I received the error in the title. I had Windows XP on the computer before but formatted it all to two 80GB NFTS partitions. When I try to boot up the Windows 7 recovery disc(or XP for that matter), my moniter goes off, saying no signal(The Windows 7 install disc is the only disc that I've tried that actually boots). I am about to try booting the recovery console off of a USB. Is there anything else that might alleviate this problem? Everything is checked and works fine inside the case.And just to make sure, I have no operating system, so after the BIOS screen the moniter will say no signal anyway, with a disc in or not.
View 9 Replies
View Related
Apr 4, 2011
I have a year old "gifted" computer currently running Windows 7 Ultimate OEM.Much of the software on it was transferred over from another standalone XP computer. This represents years of accumulated data.nfortunately, all that old software has come back to haunt me : running slow, if all. And corrupted registry, etc. etc. -- a real mess.If that wasn't enough there was also a bag of malware on the machine. I have spent the last several days cleaning it so the machine will run half decently. So far, so good! No trace of any viruses or malware Along the way I also found out that the OS may be corrupted (as in non-legit) as there appears to be some sort of EULA boot loader (DAZ.Loader?) on it (from the guy who originally set up the computer for me). With that in mind I think it's now best that I repurchase a legit copy of Windows 7 Pro (at least) OEM and reinstall the whole thing properly. But I'm not sure how this new OS will work with the remnants of the other OS still on the computer.As I still want to hang on to our most sacred data that's well integrated on both the OS drive and the larger data drives?
View 9 Replies
View Related
Jul 29, 2011
In the case of sfc /scannow CBS.log showing there are corrupt files and the MUI is also corrupt, where do we get hold of clean MUIs and where do we put them when we've found them? I've tried searching on my Win 7 dvd with no luck. It would obviously be preferable to replace the corrupt MUI rather than just the dll or exe, in case corruption happens again. I was under the impression that sfc /scannow would scan the dvd if it couldn't find a clean MUI and replace from there, but maybe not?
View 1 Replies
View Related
Aug 27, 2012
i have windows 7 Starter and bought the disk to upgarde it to windows professional, so i put dvd into dvd-unit... duh and after loading two white bars for secondary boot device it displays the hell message "winload is missing or corrupt..." i have already tried EVERYTHING on the forums and on the web including all the bootrec processes, rebuilt bcd, get a new copy of winload switching carpets, and modding BCD file to specify diferent routes for windows to search the file.. and yet nothing...I personally think the problem is that my C: drive it's partitioned in 3 one called system backup (wich is the standar recovery console for vaio, another partition of around 10 gb named System reserved and the free space where windows is located.
Administrador de arranque de Windows
----------------------------------
Identificador {bootmgr}
device partition=C:
description Windows Boot Manager
locale en-us
[code]...
View 2 Replies
View Related
Nov 22, 2012
When I bought the kit and built my new computer last year, I noticed that Windows 7 didn't like being turned off for any period of time over 5 minutes. Anytime longer and it would BSOD on me. Sometimes it gave me a full coded screen, other times notSometimes it would take me to a repair screen, sometimes not. Sometimes it would just boot up (I liked those times best) Every so often, I would have to system restore. It was annoying, but I could not find a fix, and when I did diagnostics on the disk, I was never given any errors on for the Hard drive or anything. Fast forward to a month ago when My monitor up and died on me. I had to send it to be repaired. This meant that I had to turn the hard drive off. I hooked it up today and it decided not to work. I tried system restore and the system repair and they have been useless. I contineu to get the following message upon every boot up now[CODE]
View 7 Replies
View Related
May 27, 2011
I'm looking into a relative's PC running Windows 7 Home Premium and it's giving me quite a lot of errors.I can't say exactly what the problem is, but several messages/errors led me to believe that a system repair of corrupt/missing files was in order:- Example 1: Control Panel >> Programs >> Turn Windows features on or off: The system could not find the environment option that was entered. Same error comes up when I try to run CMD as Administrator. - Example 2: Opening pictures with Windows' default picture viewer produced an error. This led me to believe that maybe just the picture viewer was corrupt, but then I saw WMP wouldn't run either, and different system options wouldn't work (as in Ex. 1).
I looked around and found that the appropriate files actually did exists, but still wouldn't run for some reason (e.g. WMP, Picture Viewer, etc.)So I decided to run "sfc /scannow" which, at first, just popped up and then immediately closed. Then I tried running it from the Windows 7 installation DVD, via Safe Mode, and via other accounts. In most cases, it said it was starting and that "This will take some time", and a few seconds later "Windows Resource Protection could not perform the requested operation".I also tried "sfc /scannow /offbootdir=c: /offwindir=c:windows" and the same via the installation DVD, in which case I used "sfc /scannow /offbootdir=d: /offwindir=d:windows" instead.I Googled a lot and nothing seems to work. I'd really like to restore this system back into working condition without losing any personal data. Yes, I've already backed it up.
View 5 Replies
View Related
Mar 21, 2012
First of all, I apologise if this is the wrong forum, but I don't know where the cause of this problem lies.I have a Windows 7 64 bit PC which until recently was working fine, including burning data DVDs (ebooks, zip files, text files, etc). ABout a week or two back, though, the discs I burnt began to turn out corrupt, with Nero reporting errors when verifying the discs. Whenever I reformat my PC and install the drivers and programs I make a disc image of the C: drive, so that I can reapply this image back to the drive at any point in the future, effectively rolling back the hard drive to the day when I reformatted and reinstalled everthing, so I applied the image to the C: drive, thinking that this would cure whatever file corruption was causing Nero to burn corrupt discs.
This failed to cure the problem, so I assumed that the DVD drive was failing, so I bought a new one, which exhibited the same problem. I tried other software (CDBurnerXP and Ashampoo) and they produced the same corrupted discs (some of the files on the disc had errors, just like with Nero, but the data on the hard drives itself was fine). So I tried burning a virtual disc image from Nero, and it turns out that the disc images Nero makes have the same corruption (which staggered me, as if the problem is purely software then I'd have thought that when I applied the C: drive backup image over the C: drive that would have solved the problem). Someone suggested it might be a rootklit, hiding in the boot block of the drive (I'm not well up on drive fundamentals, can a virus/rootkit hide in the bootblock and escape a C: drive re-imaging?) so I tried Combofix and others, and Combofix detected some 'suspicious' items and deleted them, but the problem still persists.
I tried four seperate Linux boot discs, as that way I could bypass the hard drives totally, so if I got the same error with Linux then I'd know the problem was hardware based, but Ubuntu, Mint, and Mageia all stuck mid-boot, whereas I managed to get Puppy linux to work via it's VESA setting, but the burner software in Puppy Linux (when I'd finally worked out that I had to mount the Windows 7 drive for the data, and how to then find the drive in the file system) just threw up an error - I can't remember what the error was now, I'll post it up when I get home later). I'm a *total* beginner to Linux, so please can anyone help me to get Ubuntu etc to load, so I can burn a DVD using Linux, to see if it's a hardware or software cause of the DVD-R data corruption?
Anyway, I removed all three of my hard drives, inserted an old IDE drive that had never been in a PC before, formatted it, and installed Windows 7 and Nero, and it too produced corrupted virtual disc files, and I'm 99.999% certain that no malware/rootkit could have infect that new (to the PC) hard drive, so I think the problem here is hardware, but I'm not sure.
View 2 Replies
View Related
May 22, 2012
My Acer laptop is suddenly having this issue and will not boot into windows in any mode including safe mode. I tried using a recovery disc with no luck. I can get to the command prompt from the recovery disc and I tried fixboot and fixmbr with no results.
View 14 Replies
View Related
Jun 13, 2012
My computer crashed and then crashed again during the restart. Windows tried the start-up repair, did its self diagnosis and said I have a corrupt ntfs.sys file.How do I fix this? I have looked on the Win7 installation disk but did not find any drivers.
View 1 Replies
View Related
Jul 8, 2012
A few weeks ago my computer started acting strange, in that mozilla firefox would freeze a few seconds after I started it. It would usually unfreeze about 10 seconds later, but sometimes it never would and I'd have to restart. I figured I could live with this until last week when the problem got worse and the freezing would last longer (and more often be permanent) and it didn't always require opening of the browser to trigger it anymore.Last week I re-installed windows 7 on a formatted partition, but the problem quickly came back. In fact today it was worse than it's ever been - my computer froze so I had to hold the power button to restart it. After that, I couldn't even start windows without it just hanging on on the loading windows page. I ran windows repair multiple times and kept being told that windows repair couldn't fix the problem. I tried running sfc \scannow but the computer wouldn't let me because it kept saying it had a pending repair and I couldn't get rid of the pending process. Anyway, I re-formatted the partition then re-installed Windows just now, but figure this problem won't go away unless I get to the bottom of it. Obviously a re-install isn't the answer since it didn't work the first time.For full disclosure - I have a 2nd partition and a 2nd hard drive installed on the computer that I did not format when I re-installed windows either time. One is work / program files, while the other is photos and videos. Obviously I can't just delete these, and if I back them up and restore them, any trojan or hijacker hiding in them will just return.Could this be a hardware issue, or does it sound like there's something more malicious here?At this point I've only installed Avast anti-virus and the windows updates. Please let me know if I should run any scans and post back here, as I'd really like to get this issue fixed ASAP so I can use the computer productively again.
View 11 Replies
View Related
Jul 27, 2012
I have no idea how it happened other than changing motherboards prevents the use of the same hard drive, so I may have attempted a wipe and install.The Gigabyte motherboard I had was damaged and had to be returned for repairs. Interim, I used a MSI 785GTM-E45. My Gigabyte was returned, so I switched back to it. (To use the MSI, I used a surplus hard drive until the Gigabyte was returned.)Upon booting my pc, I am given the choice of three operating systems to boot.The second and third are corrupt, so I would like to remove those. Research on the web was fruitless.Disk manager shows four separate sections to the Seagate hard drive. One: unlettered and listed as 39MB healthy; two: C: 419.92 GB NTFS Healthy (System, Boot, Page File, Active, Crash Dump, ...; three: D: 45.79 GB NTFS Healty (Logical Drive); four: 9 MB Unall.How do I remove the corrupt two or stop the pc from asking which os to use? [code]
View 3 Replies
View Related
Jan 2, 2009
I'm trying to install Windows 7 on my PC as a dual-boot w/ XP. First of all, is there a guide somewhere for doing this, because I'm basically winging it at this point.
Secondly, when I burn the image ([link removed by admin]) to a DVD+R and boot from said DVD, I get a black screen with the message 'BOOTMGR Image is corrupt. System cannot boot." in the corner. I've burned it three times using different programs, all at the slowest speed possible, and I always get this message.
The MD5 matches the one specified on the torrent info page, so I don't think the image is the problem, and nobody else on the site seems to be having this problem. I've burned other operating system boot disks using this drive and these disks before, so I don't think they are the problem, either...but this leaves me with nothing to blame.
View 3 Replies
View Related
Dec 14, 2010
I have a bit of an odd problem, I have an external USB 640gb hard drive (Freecom ToughDrive with Password encryption software removed using Freecom tool), I use it at home (on a new dell Windows 7 64 bit PC) to store all my dataIf I take the drive into the office and plug it into my machine there (Windows XP) I can read all the files, copy them off, no problem, same with my Windows 7 (64 bit) laptop that I have at home as well and on my Mum's (windows 7) laptop.The problem is that if I open a file on any of the non home PC's (a word document or a JPG etc) if I then save changes to the file, when I try to open it on the home machine it either says it is corrupted/unreadable or that in the case of a folder of documents I copied on yesterday in the office - that the folder contents were not accessible.
I have just tried opening a word (2003) doc that I saved on the drive in the office yesterday on my home machine and word shows that it is goobledygook, I have closed the file (without saving or editing on the home machine) unplugged the drive and plugged the drive into my windows 7 laptop and when I view the folder with the word file in, the file has now gone...I have also noticed that when I have created this 'corrupted' file situation, when I then plug the drive into a different machine I get the windows "scan and fix" option. I have done that in the past and it has 'found' all the files that I corrupted on the other machines and stuck them in a $found folder as though there was actual hard drive corruption.Until about 6 months ago I had a Windows XP machine and have been working with an external USB drive for years switching it between many different machines - I thought it was the drive (I originally had a freecom toughdrive 320gb) at first so I replaced that about 2 months ago when I realised what was going on but it hasn't made any difference.
View 3 Replies
View Related
Feb 5, 2011
I had a problem with my windows 7 partition (I ran partition magic 8 on it and let it "fix" the drive, bad mistake and FYI it was a accident). Anyway following this the computer froze and I went to reboot. When I restarted, I got a currupt file system message and no boot.. I had another hard drive sitting aroung and I reinstalled 7 on this new drive. I then plugged in the original hard drive to try to copy files off of it and I got the message that the original drive file system was corrupt and "would you like to format it?" question.
I said no and backed out. I then took this drive and plugged it into a windows XP computer via external USB port and I was able to access files no problem. I could see the files and was able to transfer them to the new drive through sharing of the drives on my network. I think this is interesting (weird really) that Windows 7 wanted to format the drive yet Windows XP saw the files just fine and I was able to save them easily. This actually has happended twice now where Windows 7 says a drive is corrupt and can't be read, but windows XP sees it just fine.
View 2 Replies
View Related