When i try restoring my win 7 (ultimate 32bit) by the system restore, it say's it was disabied for security reason. i re-enabled it, (with or without creating restore point), and after some days its disabled again.
View 2 RepliesI recently lost some files, so I did a system restore to a date that the files were intact to retrieve them. However, while the programs on the computer are now correctly set back to the system restore date, the files in question are still missing (at least partially). I'm curious is there exists a way to restore not the applications and system settings, but simply to restore old files, or if it's too late at this point. I suspect if I went to a professional they would be able to work some magic to restore the actual files, but it wouldn't be a standard procedure, and I don't have the funds right now to do so.
In more detail: I had XAMPP installed so I could do local testing before putting websites I was working on online. As such, the folder in which I kept all my local data for web development work was within XAMPP's 'htdocs' folder, which is where the local files needed to be stored so that apache and php could utilize them. However, since the install of XAMPP, i'd been having issues getting Apache to run - it worked occasionally, but would usually quit after a second of running each time I started it (that's a whole other issue though). In any case, because I couldn't figure out why Apache wasn't working in my XAMPP install, I decided, 'screw it, I'll give WampServer a try instead, and proceeded to uninstall XAMPP then restart the computer to get a clean slate before installing WAMP. Of course, I foolishly spaced the fact that all my local web development files were stored in the XAMPP files, and they were all deleted during the uninstall. So I proceeded to do a system restore to about 24 hours ago (the most recent system restore point). It seemed fine at first, until I tried to get my old web dev files back: I went to the htdocs folder in my now-restored XAMPP folder, but the old files were not intact! It seems that while XAMPP is back on my computer, all the files that were deleted during the initial uninstall were not restored. Specifically, and I can't for the life of me figure out why this would be, but the only parts that remained were the file structure (all the old folders where there, but not many of the files within them), Javascript files, and favicon image files. Everything else is still missing.
is there a way, within windows, to actually restore all those old files? Or due to the sequence in which the uninstall of XAMPP then the restore went, is it too late?
When I open the control panel I get ,back up and restore,instead of system and security .What am i to do to back up my file
View 1 Replies View RelatedI Windows 7 Home Premium. My windows is getting the updates but when it says configuring windows it doesn't do it and says it failure to config and is reverting back.I also cannot turn on Windows Security Center.I appears something happened 8/15. I tried microsoft's fixes and system restore which hasn't fixed the problems.[CODE]
View 13 Replies View RelatedSo I recently reinstalled a clean copy of windows and kept a full backup of my old one on a seperate hard drive, I reinstalled windows because of driver issues, and I was wondering if it was possible to restore back to my old one without ALL drivers. I would reinstall motherboard and graphics drivers after if this is possible.
View 5 Replies View RelatedBefore I had my current PC I used a cheap little Acer I got at Best Buy that served me well over the years. It's got some age on it though and it runs very slowly by now. I wiped it clean as best as I could, running antiviruses and ad aware, but it still feels very slow. With my new PC I bought a copy of Windows and I was wondering if I could use this disc to help me restore my Acer to it's original state. I know I can't actually format the drive and use it to install a fresh Win 7 on it, but can I just perform a restore with it?
View 2 Replies View RelatedThe security centre service and the Windows Firewall are always on disabled status after each boot.The start-up type is Automatic for both of them but it won't stick after a boot has been placed.
View 1 Replies View RelatedMy laptop which is a Asus GXG72 came with restore disks surprisingly, I guess it was right before they stopped putting them in the box. I never needed them till my harddrive started making noise. At first I didn't realize I had the restore disks, so I tried making my own using the program my computer had. It would always fail at the end. I Ended up making a image of my harddrive through windows not realizing I actually need a copy of windows to reload it. I ended up finding my restore disk and figure my worries were over.... Apparently it was corrupt it only partially loaded windows onto the machine, I managed somehow to tweak it enough to recognize my usb drive so that I could restore my computer to the old image. From then on it blue screened every once in a while, but it worked. I am having problems with games now and I'm not sure if its hardware or software related. I wanna try restoring the computers main files and see if that works if not just wiping it completely. Problem is I don't have working restore disks, can't make them and have no copy of windows 7. Is their anything I can do beside buy a copy of windows 7? Which I feel is retarded considering I have one technically.
View 13 Replies View RelatedMy friend just tried to run a restore on his computer (against my advice) and he somehow uninstalled all of his programs and reset his rights to standard user. I know for fact he didnt have any restore points on his computer (company computer, they dont have it turned on) would this restore go back to his fresh install? I'm trying to figure out where to go from here.
View 2 Replies View RelatedI have created a backup of files and folders and of system in Windows 7 using the built-in backup program. How can I restore only a few selected files without restoring all. I note they are zip files so i can't identify which files i want to restore.
View 1 Replies View RelatedSystem Restore will not create a restore point or restore to a previous date & time.The error message was: A restore point could not be created: An error was detected in the Volume Shadow Copy Server (VSS).The problem occurred while trying to contact VSS writers. Verify that the Event System Sevice and the VSS service are running & check for associated errors in the event logs (0x80042318).Volume Shadow Copy is started & running (done in system events).Event System Sevice and the VSS service are started and running. But no cigar, SR still broken.
View 9 Replies View RelatedI am trying to do something very similar, but not quite exactly the same as here. I hope that there might be someone here that has some tips that would be useful to what I am trying to acheive.
I just got a new system running Windows 7. I bought the "professional" version of Windows 7, so that I would be able to run "XP only" programs. I have some old software from companies that went belly up and no longer provide support. I was told that the professional version would run these programs, but I guess I didn't do my research well enough. They are not compatible.
What I would like to do now is run a dual boot between Windows 7 and XP. The difference in my case is that rather than doing a clean install of windows XP on the new partition, I would like to restore an image that I have of my old computer's drive (running XP) to the new partition on the new system (running Windows 7). Restoring to a new hardware environment shouldn't be a problem in theory, since I am using Acronis True Image Home 2011 with the add on that facilitates this.
I am assuming that the process would be the same, up until the point that the directions here say to insert the CD to install windows XP.
Does anyone know how to schedule/automate a rollback to a system restore point at a set time each day?What i'm trying to do is:1. Disable the standard system restore behavior for creating restore points when installing apps and drivers.2. Automatically/schedule a restore point to be created every morning. (probably using Task Scheduler)3. Automatically/schedule a rollback to that morning restore point every night.This should allow users to mess up the workstation during the day, and restore a working rollback point at night when users are not using a workstation.Updates are scheduled at nighttime, so before that happens, it should rollback to a good restore point, apply updates, then create a working "new" restore point with the updates in the morning....etc.
View 4 Replies View RelatedI recently got a SSD for my comp, before installing I did a backup of windows and included the system image option. I am now on a fresh install of windows but can only restore the files I had on my old windows and not the entirety of windows (programs, program settings.. ect). How can I use this image to put everything back exactly the way it was before?
View 8 Replies View RelatedI don't understand why this system is crashing. Replace motherboard and it keeps doing it no rhythm or reason to it. So I thought I give it a push out to here to see if I can get any feedback from you all.
View 8 Replies View RelatedRecently I went to restore my netbook-Acer Aspire One Happy 2. Well I clicked save user data to C: drive, for me a first time user of a netbook...didn't know that if I clicked that and was using a different windows 7 edition from the OEM. That a different windows 7 edition data couldn't be saved. Now, whenever I boot up my netbook, windows will try to install on my computer but gives error:
Error message: Windows couldn't complete installation. To install windows, restart the installation.
System Specifications:
Pre-load: Windows 7 starter
Os using before system restore: Windows 7 Professional
CPU:Intel atom N570 @ 1.66ghz
Graphics card: Intel Gma 3150
I cannot get system restore to work...when i try to create a restore point i get this error message:"The restore point could not be created for the following reason:This service cannot be started in Safe Mode (0x8007043c)"I am NOT in safe mode. I have loaded in the usual way but somehow "Restore" believes i am in "Safe Mode"I am also unable to create any backup disks because i get the same error message (Cannot create in Safe Mode).
MS Windows Home Premium 64 bit
AMD Athlon X2 Dual-Core QL-65
3.0 GB Ram
ATI Radon Graphics
After restoring my pc from a system image, when windows resarts, it won't boot, & I'm taken to the "startup repair" option screen. After Startup Repair is performed I get the message "Startup Repair Cannot Repair This Computer Automatically" with the following problem details:
Problem Event Name: StartupRepairOffline
Problem Signature 01: 6.1.7600.16385
Problem Signature 02: 6.1.7600.16385
Problem Signature 03: unknown
Problem Signature 04: 52
Problem Signature 05: AutoFailover
Problem Signature 06: 1
Problem Signature 07: BadPatch
OS Version: 6.1.7600.2.0.0.256.1
Locale ID: 1033
It says that the root cause found is "A patch is preventing the system from starting" Error code = 0x490.
been awhile since i been here but im back sadly and worried...So ima explain best i can what i did that maybe caused the BSOD. First off my cpu is OC but barely and no voltage changes and has been that way for 3 or so months. By default it runs at 3.8Ghz and i just OC it to 4.0Ghz and its been running that way fine for months and its made to be OC way more so i highly doubt its that. 2nd. I do have dameon tools and i see alot of ppl say that can cause it but again, its been on pc 4 ever and never had no issues with it and it rarely gets used but it still does get used here and there.3rd. I installed some codecs yesterday to try to get sony vegas to read a video and i probably installed 3 different codecs and some were named the same and it was the coded for a h264 or something like that, i already uninstalled that.
4th. No major changes have been made to pc, no recent windows updates, program installs or nothing has been done. Only thing i did most recently yesterday was upgraded a widget for reading GPU and its called GPU meter.5th. Finally and im scared this might be the issue is i noticed on sony vegas ( video editing program ) that it likes to max out all my cores and i noticed the temps reached 90-94 on my cpu which really scared me but ive only used this program twice but i was thinking maybe it was damaging my cpu but not sure.The last thing i was doing when it BSOD was i had a video uploading to facebook and firefox was open and a little dialoge box telling me how far video was done and apparently it got finished and i went to get drink and came back and BSOD was up and the pc didnt auto restart like it did before, had to force shutdown and restart.
My Windows 7 System Restore doesn't restore. It allows me to set them and tells me they've been done. But on the couple of occasions when I've wanted to use one, no joy. Yes I know I could possibly do it in 'Safe Mode' but that isn't an answer as to why I can't do it in regular mode?
View 2 Replies View RelatedI lost 2987 emails by clicking on email tab in windows task manager All the emails disappeared so now >>??? wondering if Sysytem restore restores email as well with Win 7 are do I have to do like Ive seen ? Go to your documents folder and right click on the folder titled Mail the properties and then the previous versions tab.Click on a restore point from before it was deleted and click restore.
View 3 Replies View RelatedI currently use Vista Ultimate. I am preparing to move to Windows 7. Is it possible to restore files from Vista Backup and Restore Center to Windows 7 after a clean install?
View 3 Replies View RelatedI've backed up my computer using macrium using system imagine how do I restore my computer bk to that cos I've saved it onto a external hd as I've got no DVDs or CDs and I tried doing it through macrium and it said it couldn't because its on a external hd so I copied it to the desktop and still no joy?
View 2 Replies View RelatedEarlier today I tried to restore a windows system image to my 120 Gb OCZ Vertex III SSD. The restore process started with no problems, but stopped after a few seconds and would go no further. So then, I decided to try another image I had created with Easeus Todo Backup and the same thing happened. The restore process started and then suddenly stopped. I thought about it for a while and decided to try to Clean All command in Diskpart to wipe the disk and start over. When the disk was successfully wiped I started the restore process once again and it worked like a charm. Since I was concerned about the system restore not working the first time, I decided to see if I could restore the image from Easesus Todo Backup, but once again, the restore started, but then stopped and when I tried the windows system image again, the same thing happened. The only way I seem to be able to get an image to restore on my SSD is to wipe it first. This has never been the case with my hard drives and I was wondering if anyone else had encountered this problem with SSD's, and if there was a solution for it.
View 6 Replies View RelatedSandy did damage my computer, either the MB or the CPU (Intel i5-760) is fried. At this point, it is not known, if my drives bit the dust as well. There are backups on the external drive, both Windows and Macrium images.The system being built has different MB and Intel i5-3350P CPU. This is an "unplanned" system hardware update and no preparation had been made for the Windows 7 drive for the migration.
View 9 Replies View RelatedI have windows 7 64 bit ultimate installed with SP1 I am not sure when this issue began, it used to work just fine at one point months back.basically certain system based icon, for example My Computer, Network, or anything at the bottom near the clock, such as Windows Update, or the Network Access icon I can right click on it them, and click properties, but nothing happens, with Windows Update, the icon doesn't start the program. On My computer i can do anything, with right click function, rename, map network drive, manage, etc. just no properties.I also noticed this in the Control Panel, for example, I click on Display, then i click on Adjust Resolution, nada. Calibrate color works, but Change Display Settings doesnt.
View 6 Replies View RelatedStart task manager is disable on my system
View 1 Replies View RelatedMy laptop was stolen recently. However, I was lucky to have a back up (old, really old) that I can use to recover at least some of my data.I now have a new laptop and I restored the backup on it. However, I created a user name different from the two that are on the backup. If I now create the two users, will they automatically be linked to the files that were restored? Alternatively, is there a way to link all files to the new username?
View 4 Replies View RelatedSystem restore process is "stuck"
OS: Windows 7 Home Premium x64
PC: SONY VAIO EL series
I am using the proprietary restore software to (try) to reload the OS back to factory condition. I have tried several times to fix it, each time with no success. I have already written zeros to every sector of the HDD, so I'm trying to start from scratch. The restore disk/process takes place over three disks I had to create as soon as I got the laptop. The first disk went through fine, and now the second disk is in, with the percentage stuck up at 24%. It got there fairly quickly, but it's been stuck like this for at least an hour now. I'm tempted to wipe the disk again, but I'm hesitating because the HDD light is on and I can hear the DVD drive doing something, though I'm not sure what.
The loading bar/progress bar isn't budging, but the green background of it is changing color (like it does when something is going on.) It is sending me no error messages, and I'm just wondering if I should let it keep going or do it some other way. When I insert the first disk, there are two options to boot from, either the "VAIO care rescue," which is what I'm doing now (I selected the restore option in its menu) or you can choose "Windows 7 install" or something along those lines, I tried that but there didn't appear to be any option to actually install under there, since it didn't detect any "images" on any drives. Regardless, I need to get this thing up and running.
Living is south FL can be a bitch when the rains come as there often is a ton of accompanying lightening that plays havoc with the electrical system, even though I have surge protectors inside and outside the house. We just had some very heavy rains with lightening and my computer shut down several times, but I could restart it each time...except for the last time when Windows wouldn't startup. At that point, Start Up Repair came into play. Although I routinely backup on an external drive, of course I never did it this month-DUH!Results from SUR were error free (error code=0x0) on all the parameters tested, however there were the following error codes reported:"Unspecified change to the system configuration might have caused the problem." Failed: 0x1fRepair Action: System FilesFailed: x490There were more options to select for a recovery task, but I didn't try them as they didn't seem to be as salient as the two above.
View 6 Replies View RelatedMy neighbor uses Windows 7 Backup & Restore. We tried to restore a file, but it will not restore the file. The detailed note states "Restore Skipped Restoring the C:Locationfilename" It gives no reason and wonder if we are missing something?
View 7 Replies View Related