The security centre service and the Windows Firewall are always on disabled status after each boot.The start-up type is Automatic for both of them but it won't stick after a boot has been placed.
View 1 RepliesI Windows 7 Home Premium. My windows is getting the updates but when it says configuring windows it doesn't do it and says it failure to config and is reverting back.I also cannot turn on Windows Security Center.I appears something happened 8/15. I tried microsoft's fixes and system restore which hasn't fixed the problems.[CODE]
View 13 Replies View RelatedRecently I got a Antivirus Antispyware virus on my computer, I ran Rkill and then Malwarebytes and it found the virus and I removed it. However now my Windows 7 Security Center firewall and my McAfee firewall will not turn on. With my Windows 7 Security center, when I try and turn it on it prompts me with a message that says 'Action center cannot turn firewall on, turn windows firewall on manually' so I click on that and I click the recommended settings and it gives me a message saying 'Windows firewall can't change some of your settings. Error code 0x80070422'. My McAfee fire wall will turn on for a second and then automatically turn off. I have tried many things and seeked for many solutions but so far none of them have worked.
View 13 Replies View RelatedI can't get get my Security Center, OR my firewall to work correctly. When I attempt to turn my firewall on, it just quits responding. When I go into my services.msc to see if any of them are there.
View 1 Replies View RelatedAfter disbling the UAC the coputer lost network connection. We noticed that the connection was completely missing form the Adapter Settings screen. We also noticed that most of the services are disabled and the ability to enable them is grayed out. We re enabled UAC but no help. This computer previously had the alureo-k root virus.It was working fine for 2 days until we triggered this.
View 1 Replies View Relatedim having a problem with my laptop. my firewall protection has disabled and someone is hijacking my pc. jus wana know what to do.
View 3 Replies View RelatedAs said, Windows (7) Firewall is not appearing in the services list, and I'm getting the error code: 0x80070424 when trying to start it up, and 0x6d9 when I'm trying to access the firewall. I have no idea what so ever as to what could have caused this, and I doubt CCleaner could have done it.
View 4 Replies View Relatedwindows firewall is not in the services list and its not working, what can i do to solve the problem,
View 3 Replies View RelatedI have:
Laptop: Acer TravelMate 5744
CPU: Intel Core i3 M380
OS: Windows 7 Professional Service Pack 1 64 bit
Network Card: Broadcom NetLink
Antivirus: McAfee
From time to time (an average of 5 minutes) I experience a packet drop, whatever host I connect to or I ping. The problem is not related to any network device because the problem does not occur on another PC connected to the same switch. And, more interestingly, the problem does not occur on a Linux virtual machine (VMware) installed on my laptop. The problem occurs even if I disable the firewall or the real time check of the antivirus. So, every clue brings to Windows 7 or the network device driver (that is up to date, though). It's important for me because I have to connect to other machines remotely (and the connection drops).
I am thinking of setting this service to manual, as this is a home machine.It does, however, have a wireless network running to which I've attached 4 devices (two laptops, a printer and an Xbox - but that's wired to the router).Supports file, print, and named-pipe sharing over the network for this computer. If this service is stopped, these functions will be unavailable. If this service is disabled, any services that explicitly depend on it will fail to start. 99% of me is sure that the above statement applies to a workstation in a production environment but I wanted to make sure and bounce it off a few of you folks.
View 2 Replies View RelatedIve got a problem with my aero, It turns off after a couple of seconds on power up.Getting a massage that Desktop Window Manager is disabled, while its started in services. Event viewer shows error message : (0x88980406).
MB: p5q se/r
Graph: hd4670
RAM: ocz 4gb 800mhz
I am experiencing issues with WMC in combination with Windows Firewall. With the FW turned on I cannot watch live TV and get an event viewer message "WMDRM-ND" Error. Turning Windows Firewall off resolves the problem. As I do not want to turn the FW on and off all the time I would like to know where I have to apply the relevant tweaks so I can watch TV with the FW on.Ideas anyone?
View 6 Replies View RelatedCan Windows 7 change the perception that Windows Firewall is security you use until you install protection that actually does something?
Like Rodney Dangerfield, Windows Firewall just don't get no respect. It didn't evolve appreciably in the transition from XP to Vista. It does its simple job well, but its lack of ambition makes it a punching bag for reviews of other, better personal firewalls. I can't tell you how many times I've written sentences along the lines of, "Sure, Product X stealths all your ports against hack attack, but heck, even Windows Firewall can do that." Good news: It looks as if Windows 7 will pull the firewall out of its slump. Some new features are visible and functional even in the pre-beta I've got running on my test system, and there's a tantalizing suggestion of more to come.
Hangin' with My HomeGroup
The firewall exists to protect your network, and Windows 7 starts by making it easier to configure that all-important home network. When users hit network problems, they curse the firewall—and they're often right to. Windows 7 addresses the problem by taking over home network setup and making sure the firewall doesn't interfere.
i did a registry cleaner(to erase some entries of a bad uninstalled software) (with comodo registry cleaner) after restart i notice that the antivirus and firewall icons on the clock area were gone, after couple of restarts they came back.... now the activity center flag is delayed (bt now i dont remember if it is normal or not) and once the flag is there i test the activity center by disabling firewall, then the flag come out with a red "x", but not with the antivirus.In this picture, as you seei have disabled both, antivirus and firewall and it only shows the firewall as "important" message.should not show the antivirus status as an important message too?
View 3 Replies View Relatedwhen i surf the internet about 50% of the time i get the error "Internet Explorer cannot display the webpage". And when i hit the troubleshoot tab it states "security or firewall settings might be blocking connection"
View 4 Replies View Relatedbest free firewall for windows 7 and microsoft security essentials
View 4 Replies View RelatedWhen i try restoring my win 7 (ultimate 32bit) by the system restore, it say's it was disabied for security reason. i re-enabled it, (with or without creating restore point), and after some days its disabled again.
View 2 Replies View RelatedAction Centre keeps reporting that my Bull-guard Firewall is turned off. When I check BullGuard is on & working OK. How do I stop this annoyance without turning off the action centre?
View 3 Replies View RelatedAnd now I am so screwed. I can't even open services.msc, I can't install an update, I can't run updates and I can't re enable anything because I can't get into services to do it. Please don't say system restore because I disabled it.
View 2 Replies View RelatedI got a virus (winupgro.exe). Afterwards, that program showed up in my task manager, but I was unable to end the process. I also got a notification that I would need to restart my computer in order to turn off UAC. Since I did not want to turn off UAC, I went back in, and turned the UAC back on. I then ran a virus scan with Norton. It didnt seem to find my virus, so I just shut down the computer.Winupgro.exe no longer shows up in task manager, but I cannot turn on Windows Security Center - getting the dialog box "The Windows Security Center service can't be started".Malwarebytes was able to find and remove it, but I still cannot open windows security center (after a restart).I used FreeCommander to run create md5 checksums. After searching the output file, I did not find any references to winupgro or its checksum string.
View 20 Replies View Relatedim running windows 7 64bit. i cant get it started. its not under services. or in the control panel. i did a full anti virus scan. and a malware scan. PC is clean. i went in the action center. and tried to turn it on but i get this popup
View 2 Replies View Relatedfriend had one of the 2011 viri variants that i removed with rkill/malwarebytes BUT afterwards he kept getting a security center warning that automatic updates was turned off:if i try to turn it on i get an error saying it cant be done [URL]...
View 14 Replies View RelatedWindows Security Center will not start, regardless of whether I'm in my regular account, or admin. I have tried fixing it based off some info I "researched" on-line, but it claims that my user account isn't the same as others using the same process....All of the others I have looked at in Services all say "Network Service", just like I tried setting the WSC to.
View 12 Replies View Relatedwill I loss some functionality if I disable this service? I'm using 3rd party firewall and MSE as AV so I don't care too much about builtin firewall and DAP. I need however to connect another computer at home via ethernet cable. If I turn this off, stops something to work?
View 2 Replies View RelatedI just installed Windows 7 over my VISTA OS on my new Toshiba Notebook. Since I have only 3 GB of RAM I installed the 32 Bit Version of Windows 7...
VERY DISAPPOINTED immediately as I encountered 2 issues
1. McAfee Security Center is alerting me that software is Not Compatible....
2. Internet Explorer barely runs... and when I exit IE, there is no less than 30 second delay before the window closes... even if I have just opened IE and immediately close (meaning nothing has cached to be cleared)..
how can i turn on windows security center service
View 1 Replies View RelatedHow do I reinstall windows 7 security center
View 2 Replies View RelatedUpdate KB2656373 will not install on my machine. how to install it or delete it.
View 2 Replies View Relatedafter i managed to remove a virus on my computer (system defender) i get this message to turn on the windows security center service, but when i try to do that i get the message "the windows security center service can't be started".. the security center properties is on automatic... but the message is still on.. i tried to do a system restore but it doesn't give me an option date before the virus attack. i have windows 7 home edition..
View 1 Replies View RelatedCurrently I am having problem to turn on my window security center. Solution that I have tried is:
1- By going to services>>properties>>automatic /automatic (delayed start) - failed
2- Already scan with malwarebytes anti-malware and removed affected files - failed
Because of this, I cannot install or update my windows update and antivirus.
I did a normal registry scan and there were some errors and I clicked to fix them. Now Action Center doesn't show in the task bar...So I search for it and click on it and it tells me that Windows Security Center service is turned off...I click on the button to turn it on and it tell me that it cannot start...I've been searching online for a solution to my problem and I have seen other posts about people having a similar problem...Going to services doesn't work for me...I'm assuming that since Winutilities removes random HKEYs, that might be my problem...Now, how do i get these HKEYS back?
View 3 Replies View Related