And now I am so screwed. I can't even open services.msc, I can't install an update, I can't run updates and I can't re enable anything because I can't get into services to do it. Please don't say system restore because I disabled it.
View 2 RepliesI have had this strange problem for a few weeks now and so far I can't figure out a solution or why it happens.
When closing an application, the application's service (in the Windows Task Manager) doesn't end with the closing of the application like it should. This is happening with 95% of my applications.
Running Windows 7 Home Premium 64bit. Computer is running well and installing new programs, but get the above message when I try to access any Administrative services and some other control panel programs. Have run following: in repair mode:
sfc scannow
bootrec /fixMBR
bootrec /fixBoot
bootrec /rebuildBCD
chkdsk c: /fix
regsvr32 /i shell32.dll
bootsec /nt60 c: /mbr
number of anti-virus and anti-malware programs.
Our office has an old program that we still need to use when upgrading our PC's to Windows 7. The program will run fine if you start a windows virtual PC and install and run it. However, based on the needs of our office, I need to be able to run Windows XP mode and simply have an icon for our users to click to take them to the application.If I install the program in windows XP mode, and then add a shortcut to the file under all users/start menu, a shortcut is placed in the appropriate place on the windows 7 machine and I can copy that shortcut ot the desktop. The program runs fine until you restart the computer. Once you restart the computer and double click the link on the windows 7 desktop to the program running in windows XP mode, it says:
Cannot start virtual application. The application is blocked from running as a virtual application.
I read some other posts saying to put a new shortcut in the all users/start menu folder. This works, but only until our users restart their computer. The next time the computer is up, the problem happens again. This is not an acceptable solution to have to create a new shortcut for each workstation each time the computer is restarted.
The error states:explorer.exe - application error The application was unable to start correctly (0xc0000022). Click OK to close the application.When I click OK, i just have a black screen. I can get the task manager going by hitting control, alt, delete. I've tried to start explorer.exe from the file menu, but get the same error.
View 1 Replies View RelatedThe application failed to initialize properly (0xc0000142) Click on OK to terminate the application.The only option is to click ok. I am deathly afraid to turn off my computer because my brother recently did and that caused it to freeze at the blue HP startup screen, but thats another thread. I get this error whenever I launch anything. I can't even open up the task manager. I really need help. I don't currently have a way to back up my stuff either but I am working on it. By the way, I don't know that my brother was having the same error message as i was or if he was having any error messages. I use zone alarm full security suite if that helps at all, I don't know if it deleted a registry file or something.
View 4 Replies View RelatedI tried to replace 3 files in the system 32 folder, and must have made a mistake along the way leaving my laptop inaccessible once logged on. The three files were:
uxtheme.dll
themeui.dll
themeservice.dll
I received these error messaged when logged on:dwm.exe - Application error the application was unable to start correctly (0xc000007b). Click ok to close the application.explorer.exe - Application error the application was unable to start correctly (0xc000007b). Click ok to close the application.Can system restore revert back the files so it was like i never attempted the patch?
I don't what happened but all of a sudden a message box opens up on my windows 7 laptop and it says this " the application was unable to start correctly (0xc0000142). Click OK to close the application" . I clicked ok but the error message box keeps returning back.If i remember properly, this happened when I tried installing some wallpaper.system seems to be working finw with all applications, but this message box is quite annoying.
View 1 Replies View RelatedI was just wondering if it is possible to reverse engineer a 32-bit application and recompile it as a 64-bit application. If so, would it still function?I don't know if talking about reverse engineering is acceptable in this forum or not. If not, my apologies.Also, I don't exactly know how "legal" it is or if it's against any EULAs.I'm a heavy browser user. I use Firefox Nightly and constantly have several tabs open. I also run several different applications at once and occasionally Skype. I'm CONSTANTLY hitting the 32-bit barrier for RAM (can't remember if it's 3.1, 3.2 or 3.3 GB) and I still have more RAM on my system. I'm thinking the video quality on Skype starts going south when I run low/out on addressable memory since it's a 32-bit application
View 9 Replies View RelatedI'm using Windows 7 Ultimate. I've been using it for some time without problems, but this morning I was unable to get on the Internet. Yesterday I'd installed an update for ZoneAlarm which I thought was probably the problem, so I uninstalled in and downloaded and installed PC Tools Firewall Plus instead. no my computer will connect to the Internet OK, but whenever I try to open most programs, I get the following error:"The application was unable to start correctly (0xc0000142). Click OK to close the application."The only two exceptions I've found are Microsoft Security Essentials and Internet Explorer which both work fine.
View 4 Replies View RelatedI'm trying to run a .bat file but when i start it cmd won't start and it gives the error message"The application was unable to start correctly (oxc0000142). Click OK to close the application."
View 2 Replies View RelatedAfter disbling the UAC the coputer lost network connection. We noticed that the connection was completely missing form the Adapter Settings screen. We also noticed that most of the services are disabled and the ability to enable them is grayed out. We re enabled UAC but no help. This computer previously had the alureo-k root virus.It was working fine for 2 days until we triggered this.
View 1 Replies View RelatedThe security centre service and the Windows Firewall are always on disabled status after each boot.The start-up type is Automatic for both of them but it won't stick after a boot has been placed.
View 1 Replies View RelatedI am thinking of setting this service to manual, as this is a home machine.It does, however, have a wireless network running to which I've attached 4 devices (two laptops, a printer and an Xbox - but that's wired to the router).Supports file, print, and named-pipe sharing over the network for this computer. If this service is stopped, these functions will be unavailable. If this service is disabled, any services that explicitly depend on it will fail to start. 99% of me is sure that the above statement applies to a workstation in a production environment but I wanted to make sure and bounce it off a few of you folks.
View 2 Replies View RelatedIve got a problem with my aero, It turns off after a couple of seconds on power up.Getting a massage that Desktop Window Manager is disabled, while its started in services. Event viewer shows error message : (0x88980406).
MB: p5q se/r
Graph: hd4670
RAM: ocz 4gb 800mhz
I have an application that is set to always be on top of all others. Ive looked through all the options in the application and there is not one to make it not be on top of all other windows. I have also asked the maker of such software and they have said that there is no way to not make it ontop. does anyone know a way to make another application come ontop of this one or a way to get it to where I can use the other application? the application Im using is a medical application and the manufacturer is not helping at all. the application I want to use isnt harmfull and it is job specific.
View 2 Replies View RelatedI need to run a program from a server in a mixed Windows XP and Windows 7 environment. The current policy is to have the Windows 7 UAC turned to 'Never Notify' as the logon script needs to make changes to registry, etc. The program will only work with Windows 7 if the UAC is turned on. Is there a way of activating the UAC for this one program only?
View 4 Replies View RelatedI'm looking for an application that can log all changes to a PC in the files/folders and registry when any application is installed or uninstalled.If an application gets installed, I need to know exactly what changes were made to the system. The systems will be using Windows 7 x32 and x64 bit.
Does anyone know of such an application?
I can't find the right GMA 4500m driver for toshiba satellite L455 laptop...i can't use my cs4 application...how do i get the right GMA driver?
View 2 Replies View RelatedWhat is an iSO app that is needed for iheart radio for my I pad?
View 1 Replies View RelatedI had a malware/spyware problem and used antisuperspyware to fix it but after deleting the detected files now I cannot open any .exe file directly when I try it gives me application not found error or which of the following programs u want to use to open the file ,I cannot even open IE or firefox ,what should I do?
View 1 Replies View RelatedI open a a mail contain virus.after that when I insert a dvd into DVD RW drive it does'nt open it & said application not found.
View 2 Replies View RelatedI can't open any application. I don't know what happen. Whenever I open an application, It was open with Internet explore. All of my icons are appear with Internet Explore icon.
View 4 Replies View RelatedYou can do that on the Mac by command + tilde, and is very convenient.
View 3 Replies View RelatedSo I have windows 7 RC1 installed. Generally I never do task/application switching using windows but I recently installed a wacom pen tablet and one of the shortcut keys on the tablet was programmed to switch to various applications... BUT IT DID IT IN A WAY I HAVE NOT FOUND IN Windows 7 YET!
Usually Alt+Tab gives you the generic windows task switcher that shows all the icons of the various apps you have open.
But the pen tablet used an app switcher that did this..
http://dl.getdropbox.com/u/49679/win7application.png
Its a screenshot of every open window you have open and you can cycle through them til you get to the one you want.
Any idea what the shortcut keys are to access this application switcher?
If i have a 32-bit video player, on 64-bit OS,
Will i be needing 64-bit codecs?
I tried to install a program which i made using visual basic 2008 but there was an error that said"application cannot be started. contact the application vendor"
can anyone help am just a beginner
I am looking for a chat program that can: Work correctly without a working internet connection, Clients can use web browser to chat, so that clients don't install anything special.
View 5 Replies View RelatedI am attempting to have an application run on startup. I put the application in the startup folder in the start menu, but that didn't work. It shows up under startup in msconfig, and the box is checked, but when I restart the application does not run.
View 7 Replies View Relatedi have an 03 jeep grand cheroke, last week my windows would only go up and down once in a while, now dont at all, also when your turn head lights and interior lights to auto on the interior lights will not go off after you start car or turn it off checked fuses, is there one i dont see somewhere?
View 2 Replies View RelatedI had no problems with CNET but when I got this new PC every time the TechTraker says I have new updates, every time I try, it says "no registered application for this extension". This is using my normal browser Opera. When I copy and paste the address to Internet Explorer, no problem but why does it give me this problem and I would much prefer to do it on Opera.
View 8 Replies View Related