I have had this strange problem for a few weeks now and so far I can't figure out a solution or why it happens.
When closing an application, the application's service (in the Windows Task Manager) doesn't end with the closing of the application like it should. This is happening with 95% of my applications.
The error states:explorer.exe - application error The application was unable to start correctly (0xc0000022). Click OK to close the application.When I click OK, i just have a black screen. I can get the task manager going by hitting control, alt, delete. I've tried to start explorer.exe from the file menu, but get the same error.
View 1 Replies View RelatedI don't what happened but all of a sudden a message box opens up on my windows 7 laptop and it says this " the application was unable to start correctly (0xc0000142). Click OK to close the application" . I clicked ok but the error message box keeps returning back.If i remember properly, this happened when I tried installing some wallpaper.system seems to be working finw with all applications, but this message box is quite annoying.
View 1 Replies View RelatedAnd now I am so screwed. I can't even open services.msc, I can't install an update, I can't run updates and I can't re enable anything because I can't get into services to do it. Please don't say system restore because I disabled it.
View 2 Replies View RelatedI'm using Windows 7 Ultimate. I've been using it for some time without problems, but this morning I was unable to get on the Internet. Yesterday I'd installed an update for ZoneAlarm which I thought was probably the problem, so I uninstalled in and downloaded and installed PC Tools Firewall Plus instead. no my computer will connect to the Internet OK, but whenever I try to open most programs, I get the following error:"The application was unable to start correctly (0xc0000142). Click OK to close the application."The only two exceptions I've found are Microsoft Security Essentials and Internet Explorer which both work fine.
View 4 Replies View RelatedI'm trying to run a .bat file but when i start it cmd won't start and it gives the error message"The application was unable to start correctly (oxc0000142). Click OK to close the application."
View 2 Replies View RelatedI need a program that will close all the non-essential processes and services? Does any know how to do this or a program that will do it? EDIT: Ill rephrase. I only want processes that allow the computer to start and then for me to be able to delete a file that is being used by some unknown process.
View 3 Replies View RelatedRunning Windows 7 Home Premium 64bit. Computer is running well and installing new programs, but get the above message when I try to access any Administrative services and some other control panel programs. Have run following: in repair mode:
sfc scannow
bootrec /fixMBR
bootrec /fixBoot
bootrec /rebuildBCD
chkdsk c: /fix
regsvr32 /i shell32.dll
bootsec /nt60 c: /mbr
number of anti-virus and anti-malware programs.
The application was unable to start correctly (0xc0000142).click OK to close the
View 2 Replies View Relatedthis device is being used by another application. please close any devices that are playing audio to this device and try again. is what it is saying when i try to test , its hdmi ti hdmi from pc to tv i got picture but no audio and cable works fine on frineds pc and tv?
View 2 Replies View Relatedhow to remove unchecked services completely (DELETING) from the services tab in msconfig? Like Google update service and so on.
View 9 Replies View RelatedI'm trying to sort out issues with my Windows 7 machine and want to disable/set to manual services that I know are not needed, but every time I have done this in the past (a while ago now) I invariably run into an issue where I've inadvertently disabled a service that was needed by something, and I end up scratching my head (as all of my hair falls out around this point) and enabling everything just to sort it..
Is there any utility that anyone is aware of that lets you toggle service status, with the option to reset to default or reset to last status, while showing a list of services that I've changed?
I can't seem to word it properly for a search engine to find relevant results, and find usually specific services and not something I'm hoping exists.
I wish the Services.msc mmc had a checkbox or some sort of flag to show altered services so you could sort them by that, which would help a lot, but it doesn't.
Our office has an old program that we still need to use when upgrading our PC's to Windows 7. The program will run fine if you start a windows virtual PC and install and run it. However, based on the needs of our office, I need to be able to run Windows XP mode and simply have an icon for our users to click to take them to the application.If I install the program in windows XP mode, and then add a shortcut to the file under all users/start menu, a shortcut is placed in the appropriate place on the windows 7 machine and I can copy that shortcut ot the desktop. The program runs fine until you restart the computer. Once you restart the computer and double click the link on the windows 7 desktop to the program running in windows XP mode, it says:
Cannot start virtual application. The application is blocked from running as a virtual application.
I read some other posts saying to put a new shortcut in the all users/start menu folder. This works, but only until our users restart their computer. The next time the computer is up, the problem happens again. This is not an acceptable solution to have to create a new shortcut for each workstation each time the computer is restarted.
The application failed to initialize properly (0xc0000142) Click on OK to terminate the application.The only option is to click ok. I am deathly afraid to turn off my computer because my brother recently did and that caused it to freeze at the blue HP startup screen, but thats another thread. I get this error whenever I launch anything. I can't even open up the task manager. I really need help. I don't currently have a way to back up my stuff either but I am working on it. By the way, I don't know that my brother was having the same error message as i was or if he was having any error messages. I use zone alarm full security suite if that helps at all, I don't know if it deleted a registry file or something.
View 4 Replies View RelatedI tried to replace 3 files in the system 32 folder, and must have made a mistake along the way leaving my laptop inaccessible once logged on. The three files were:
uxtheme.dll
themeui.dll
themeservice.dll
I received these error messaged when logged on:dwm.exe - Application error the application was unable to start correctly (0xc000007b). Click ok to close the application.explorer.exe - Application error the application was unable to start correctly (0xc000007b). Click ok to close the application.Can system restore revert back the files so it was like i never attempted the patch?
I was just wondering if it is possible to reverse engineer a 32-bit application and recompile it as a 64-bit application. If so, would it still function?I don't know if talking about reverse engineering is acceptable in this forum or not. If not, my apologies.Also, I don't exactly know how "legal" it is or if it's against any EULAs.I'm a heavy browser user. I use Firefox Nightly and constantly have several tabs open. I also run several different applications at once and occasionally Skype. I'm CONSTANTLY hitting the 32-bit barrier for RAM (can't remember if it's 3.1, 3.2 or 3.3 GB) and I still have more RAM on my system. I'm thinking the video quality on Skype starts going south when I run low/out on addressable memory since it's a 32-bit application
View 9 Replies View Relatedcan't close anything with mouse?
View 1 Replies View RelatedMy PC used to be on 24/7 until I decided that I wasting power however now it seems to want to close down at 23:15 unless it is actually working on something - This is annoying me and I would like to know what is causing this shutdown
View 7 Replies View RelatedWhen I log into hotmail on my computer everything good but when I want to logout it will not let me. It states that signing out isn't complete and Mobile - Windows Live mobile.msn.com text_mobileare not closedI do not know how they got opened in the first place I need to fix..
View 1 Replies View RelatedWindows 7 RC1 7100 I'm looking for an easier way to close down six USB devices (USB external backup hard drives) than closing them one at a time in the little 'open devices' menu. Is there a utility or setting to automate the process when logging off or shutting down?
View 9 Replies View RelatedI am running windows 7 ultimate x64after booting the pc and without visiting any website when I scan my machine localhost using command nmap -sT -O localhost[CODE]
View 6 Replies View RelatedHow I can close port 135? Any way to close it without program.
View 2 Replies View RelatedFrom looking at others' questions, this seems to be a recurring problem under Windows for a long time. My version: running Windows 7, 64-bit, with Spyware Doctor. Several applications fail to close on exit, and I have to manually close them in Task Manager before they will work again. Always happens with Outlook 2007, Google Chrome, sometimes happens with Firefox and Acrobat Reader. Outlook also hangs on the last message in a "send and receive" operation.
View 1 Replies View Relatedi have the same problem with a benq joybook a53, every time i close the lid, when i open it , i have a blue screen, and it doesn`t matter if i put it on sleep or hibernate, only with "do nothing" doesn`t appear the blue screen, but i really do nead to close the lid and put it to sleep, or hibernate. i`ve attached the files from c:\windowsminidump
View 3 Replies View RelatedI have already found its cause. That's because I chose the advanced section, but I don't know how to close the advanced section.
View 4 Replies View RelatedBasically, all I want to be able to do is use the [ESC] button to close windows (ie Browsers,apps, games, anything that if selected and when a button is pressed will close it) in windows 7.
I always thought this would be good but is there anyway to make it do that from inside windows without some other software. If there isn't, then what other 3rd party programs can let me do this in Windows.
I have searched, not as heavy as I think i should, but all i keep seeing in Visual Basic and C++ programing, something I'm not good at.
If anyone can help it would be cool. It doesn't have to be [esc] but i would prefer it.
I've been running RC1 since it became available, and recently I've added 2 other user accounts on my main PC. These 2 accounts seem to have the same problem: neither of them allow you to "x-out" of a window by clicking the red X up in the right hand corner to close the window.
View 2 Replies View RelatedMy Laptop screen turns off when I close the lid also I have edited the power options and the plan settings and I choosed to never turn off the display?
View 5 Replies View RelatedWhat's the difference between these two buttons on windows applications, do they both use the same code?
View 3 Replies View RelatedWhenever I finish using sticky notes and I try to close it, it doesn't closeThere's always the Windows Ding sound and I can only close it from task manager.
View 1 Replies View RelatedI have a Windows 7 laptop (Thinkpad T420s), Many times I have tried setting the "Power buttons and lid -> Lid close action" to Hibernate on "On Battery" and "Plugged in" but when I click ok and immediately open the same settings via "Change advanced power settings" I see that my changes are not saved and the settings shows default value "Do nothing".I even tried changing the "Power plan" to Balanced, "Maximum battery life" etc but nowhere I could get this option work.I tried "powercfg /hibernate on" and then doing the above things but that too did not I tried other option also ("Sleep") , but they too did not work and the settings revert to default "Do nothing" everytime.Modifying "Change what closing the lid does" also does not work.Could somebody give me some clue about how do I set it up to Hibernate on "lid close". Right now I have created a shortcut for hibernate and double click on it before closing the lid.
View 2 Replies View Related