After disbling the UAC the coputer lost network connection. We noticed that the connection was completely missing form the Adapter Settings screen. We also noticed that most of the services are disabled and the ability to enable them is grayed out. We re enabled UAC but no help. This computer previously had the alureo-k root virus.It was working fine for 2 days until we triggered this.
View 1 Replies
The security centre service and the Windows Firewall are always on disabled status after each boot.The start-up type is Automatic for both of them but it won't stick after a boot has been placed.
View 1 Replies View RelatedI am thinking of setting this service to manual, as this is a home machine.It does, however, have a wireless network running to which I've attached 4 devices (two laptops, a printer and an Xbox - but that's wired to the router).Supports file, print, and named-pipe sharing over the network for this computer. If this service is stopped, these functions will be unavailable. If this service is disabled, any services that explicitly depend on it will fail to start. 99% of me is sure that the above statement applies to a workstation in a production environment but I wanted to make sure and bounce it off a few of you folks.
View 2 Replies View RelatedIve got a problem with my aero, It turns off after a couple of seconds on power up.Getting a massage that Desktop Window Manager is disabled, while its started in services. Event viewer shows error message : (0x88980406).
MB: p5q se/r
Graph: hd4670
RAM: ocz 4gb 800mhz
And now I am so screwed. I can't even open services.msc, I can't install an update, I can't run updates and I can't re enable anything because I can't get into services to do it. Please don't say system restore because I disabled it.
View 2 Replies View Relatedhow to remove unchecked services completely (DELETING) from the services tab in msconfig? Like Google update service and so on.
View 9 Replies View RelatedI'm trying to sort out issues with my Windows 7 machine and want to disable/set to manual services that I know are not needed, but every time I have done this in the past (a while ago now) I invariably run into an issue where I've inadvertently disabled a service that was needed by something, and I end up scratching my head (as all of my hair falls out around this point) and enabling everything just to sort it..
Is there any utility that anyone is aware of that lets you toggle service status, with the option to reset to default or reset to last status, while showing a list of services that I've changed?
I can't seem to word it properly for a search engine to find relevant results, and find usually specific services and not something I'm hoping exists.
I wish the Services.msc mmc had a checkbox or some sort of flag to show altered services so you could sort them by that, which would help a lot, but it doesn't.
yesterday i turned off computer and everything was working perfectly. today i turned it on and i cant login to my user account and theres only 1 user (me). my password has 2 @@'s and the ctrl and alt were disabled i think because i also tried using the onscreen keyboard and cant make the symbols either. my keyboard is portuguese and uses alt + ctrl+2 to make these symbols. I CANT LOGIN TO MY COMPUTER! (not this 1).
Remember i already tried the Onscreen keyboard! ctrl and alt doesnt work either
I have recently upgraded from windows vista to windows 7in vista, I had Kaspesky Internet Security 2011 working properlyAfetr installing windows 7, I installed Kaspersky Internet Security 2013, (since i didn't have te initial CD of KIS 2011)After few days, I realised that Kaspersky is disabled, and when i click enable in maintenance center, nothing happensI tried to uninstall Kaspersky, but the installation could not end properly,I even tried system restore, but the systemm detected an error, and afetr restoration, the problem remainsSo, I still can't uninstall, or activate Kaspersky.
View 3 Replies View Relatedim having a problem with my laptop. my firewall protection has disabled and someone is hijacking my pc. jus wana know what to do.
View 3 Replies View RelatedCant run .bat files in windows 7 x32 with uac disabled?
View 9 Replies View RelatedI was having an issue with my print spooler resetting itself to the stopped setting and manual after each reboot or shutdown. I apparently fixed that one (however, not entirely sure how I did it). But now all of a sudden, I have another service doing the same thing. My Acronis Backup Scheduler service is resetting itself to Manual from a setting of Automatic and started after each shutdown and restart. It never had an issue until yesterday. No updates to that product was done in the last few weeks. It is the most current updated software for the product.
Is there anyone that knows why and how these settings can begin doing this?
I had a virus on my computer which I have since cleaned (and double checked with several scans). The remaining problem on the computer was an inability to turn on my windows firewall (though the McAfee firewall was running). I followed the steps at My link through step 14 (though I forgot to make the system restore point at step 13). Then my FSS log began to look different. Here is the copy of my most recent FSS log.
View 1 Replies View Relatedway to restore Windows 7 services to their default setting automatically? I have tried manually setting certain services but they won't stay in the configuration I give them. For example, my Window's Update Service is set to Automatic-delayed startnfortunately, I can't run Windows Update and I get "the service isn't started" message.So,I try starting the service, it indicates started and same problem. I try resetting it to Automatic, hit the apply button and all is well. I restart the computer and it is back to Automatic-Delayed and Window's Update won't run..
View 1 Replies View RelatedI was browsing the internet a few days ago, onno other programs open, when Windows froze, and I had to hold the power button to shut it off. When I turned it back on, it wanted to run a disk check, so I let it. It performed many operations (which I can retrieve the logs of, if needed), but when Windows started up, it only brought up a black screen with a movable cursor. If you just let it sit there for several hours, it presented a BSoD.Windows worked fine in Safe Mode, so we ran several virus scans using McAfee (which we already had on the computer, the Security Suite), Spybot S&D, SUPERAntiSpyware, and whatever PCPitStop's virus scanner is. All scans were clean, except for several cookies. McAfee's scan never finished, and the scan stalled often, and it started locking up along with other issues (not totally sure what was wrong with it because my dad was trying to fix the computer at this point), so my dad uninstalled it. We then ran another disk check, and Windows started up normally afterwards.
(tl;dr: background of the problem, did several scans, no virus)Despite fixing that problem, I'm now having issues with some of the Windows services. At first, when starting Windows, only the Audio Service didn't start automatically. If I ran the Audio diagnostic tool, it would start the Audio Service, but that causes the WLAN Auto-Config Service and the Desktop Window Manager Session Manager Service to stop immediately, causing my wi-fi and Aero to stop working. If I tried to start either of those services back up, the Audio Service would stop again.I'm not sure what I did to cause this to change, but eventually the audio diagnostic tool couldn't start the Audio Service anymore. When I try to start it, my Aero and wi-fi stop working again, but the Audio Service still doesn't turn on.
If I open services.msc and start WLAN Auto-Config (wi-fi) and Desktop Window Manager Session Manager (Aero) manually from there, they both turn back on easily, but if I do that with the Audio Service I get error 1068 ("The dependency service or group failed to start"), and wi-fi and Aero turn off again.note: The faulty services are all set to Automatic, and have been this whole time.Since I hadn't scanned since my computer only worked in safe mode, I decided to scan with SUPERAntiSpyware again, then Malwarebytes. Both scans were clean.Because I get error 1068 when trying to start the Audio Service, I looked at the services it depends on, and checked them. All were in order except the Windows Audio Endpoint Builder, which was stopped, which explains the error 1068 I was getting earlier. When I try to start that service, I get error 1067: "The process terminated unexpectedly." Here's the log of that error[CODE]
I've got a new Sandy Bridge-based PC which booted fast but has naturally slowed down now that I've put my various applications on. Is there a handy utility anywhere that can tell me which ones are safe to untick in the System Configuration screen (msconfig)? The only one I felt safe to untick so far is 'Apple Mobile Device'.
View 4 Replies View RelatedI'm trying to optimize my computer a bit, and in msconfig I have found many services from application that, at the best I only use occasionally. My question is, if I disable a service that is needed for an application, will it automatically be restarted when trying to run said application? Or do some applications really need to do something at startup to be fully functionally (seems a bit weird to me, but you never know...)
View 4 Replies View RelatedAfter instaling the Service Pack 1 for Windows 7, the machine does the normal reboot and brings me to the welcome screen. I put in my password and it gets rejected. I do not have a password reset key (USB) so what do I do?
View 8 Replies View RelatedError message: "No Audio Output Device is installed"
Windows 7 was working fine but then after one of its automatic updates the sound stopped working on the system.(i.e. Red "X" on speaker icon) I have tried enabling the audio in normal, mode safe mode. The driver is up to date and I have even tried re-installing it.
System restore provided a temporary fix as after one normal use of the PC windows will re-disable the audio. (and yes I disabled auto updates....windows still manages to disable the audio)
I had the PC sent out under Manufactures Warranty to try to resolve the issue, but as the warranty only covers physical damage to the system all the service center was able to do was confirm that it was a software problem (they checked the hardware and found it to be working properly).
So I have determined that the audio is solely software related and that it must be disabled deep in the system as the usual enable/disable buttons have no effect.
Yesterday after doing a malware scan I restarted my computer when I turned it back on my tast bar was old so I checked the themes and windows aero themes have been disabled it also won't let me connect to any networks as it doesn't show any.It won't let me access the network adapter settings but they are definitely enable.
View 7 Replies View RelatedIve been having a problem with my services program. My laptop (vaio) has been having problems with the hot-keys and I found out the problem was that the Vaio Event Service doesnt start when I turn it on so i turn the service on and set the service to start automatically at start-up.
View 1 Replies View Relatedim running win7 64bit and have noticed that host process for windows services is sucking up 30mbs upload and 30 mbs download per day . i have checked and my system is clean . i just wondered if there was anything i can do to stop them using so much data . in just 3 months its used over a 1 gig which is to much.
View 5 Replies View RelatedYesterday my friend needed me to test something for him in MySQL, a program I had installed a while back. When I tried to get in, it told me that I needed a root password. Since I forgot that, and I had no idea how to log in, I used Revo Uninstaller Pro to uninstall MySQL and delete all the leftover files and registry values that it left behind. I'm not sure if that is what caused it or something else that I can't remember, but since last night a lot of my computer services aren't working.For one thing, I can't log into MySQL.I can't install/uninstall any programs. - Solved.I have my Control Panel listed as a menu in my Start list, but when I highlight it, it shows the Control Panel as empty.I can't turn on my Windows Security CenterI can't access/turn on System Restore and clicking on 'Turn System Restore on or off' does nothing.I can't access System Information - Solved.or System Properties - Solved.In addition, I can't click the properties of any folder (If I try to right click My Computer and hit properties, nothing happens), my computers sound is not working, my taskbar shows my internet as offline even though its working and I can't open pictures - Solved.I also cannot run SFC / Scannow - Solved.or run Windows Update - Solved.I also feel like there might be something wrong with my graphics diver, because as I've been typing this post, my screen keeps flashing to my desktop - Solved.I cannot pull up my specs using the program 'Speccy' because it says Class Not Registered for everything. I've also lost the CD for my Windows 7 Ultimate, so I don't know if I could use that to fix it. - Solved.Edit 1: My video driver was in fact affected by it, as I can't watch any videos, and attempting to crashes my firefox plugin process.
View 4 Replies View RelatedI have Windows 7 32 bit on my laptop and Windows 7 64 bit on the desktop, both Home Premium. Every time I go online with the desktop it starts a download according to NetLimiter. The download appears as Host process for Windows services and it expands to process 720 and then to 92.122.126.243:80. I use 3G mobile broadband for my net access and this download could use a considerable amount of my Gb allowance. Using NetLimiter I can kill the download but I would like to know what is happening and do I need the download? Some idea of the d/l size would be handy as well. None of this happens when I log on using the laptop.
View 1 Replies View RelatedYesterday my friend needed me to test something for him in MySQL, a program I had installed a while back. When I tried to get in, it told me that I needed a root password. Since I forgot that, and I had no idea how to log in, I used Revo Uninstaller Pro to uninstall MySQL and delete all the leftover files and registry values that it left behind. I'm not sure if that is what caused it or something else that I can't remember, but since last night a lot of my computer services aren't working.I can't install/uninstall any programs.I can't access/turn on System Restore and clicking on 'Turn System Restore on or off' does nothing.I can't access System Information.I can't access System Properties.In addition, I can't click the properties of any folder (If I try to right click My Computer and hit properties, nothing happens), my computers sound is not working, my task-bar shows my internet as offline even though its working and I can't open pictures I also cannot run SFC / Scan now or Run Windows Update.I also feel like there might be something wrong with my graphics diver, because as I've been typing this post, my screen keeps flashing to my desktop.
My video driver was in fact affected by it, as I can't watch any videos, and attempting to crashes my fire-fox plugin process.I cannot pull up my specs using the program 'Speccy' because it says Class Not Registered for everything. I've also lost the CD for my Windows 7 Ultimate, so I don't know if I could use that to fix it.I can't log into MySQL. I have my Control Panel listed as a menu in my Start list, but when I highlight it, it shows the Control Panel as empty.I can't turn on my Windows Security Center
Does Windows 7 support terminal Services?
View 4 Replies View RelatedAs said, Windows (7) Firewall is not appearing in the services list, and I'm getting the error code: 0x80070424 when trying to start it up, and 0x6d9 when I'm trying to access the firewall. I have no idea what so ever as to what could have caused this, and I doubt CCleaner could have done it.
View 4 Replies View Relatedwindows firewall is not in the services list and its not working, what can i do to solve the problem,
View 3 Replies View RelatedMy laptop is only 4 days old. The IE9 icon in the taskbar was working properly meaning if I click the icon it will launch a webpage and if I pressed it again it will launch another webpage (the icon in the taskbar then get stacked up which is correct). Unfortunately after a windows update on my laptop, this feature doesn't work anymore. When I click the icon it will open a webpage but if I click it again the webpage CLOSES! No matter how many times I click the icon in the taskbar it won't launch another webpage. The IE in the start menu works fine and it will open as many webpages as I like but not in the taskbar (I have unpinned and repinned but to no difference) I have even done a system restore back to the earliest date possible but the problem has not been reverted. How to I fix it?.
View 3 Replies View Related2 days ago my Windows 7 sleep option suddenly disabled, tried to update to the newest video card driver but still couldn't fix it.
View 4 Replies View RelatedI just upgraded all home PCs to SP1, and can no longer connect to my homegroup. Is it possible that SP1 actually kills homegroup? Or is it my work domain administrator that disabled the feature?
View 1 Replies View Related
