Some Services On Windows 7 Are Resetting Themselves
Jan 5, 2013
I was having an issue with my print spooler resetting itself to the stopped setting and manual after each reboot or shutdown. I apparently fixed that one (however, not entirely sure how I did it). But now all of a sudden, I have another service doing the same thing. My Acronis Backup Scheduler service is resetting itself to Manual from a setting of Automatic and started after each shutdown and restart. It never had an issue until yesterday. No updates to that product was done in the last few weeks. It is the most current updated software for the product.
Is there anyone that knows why and how these settings can begin doing this?
I'm resetting (from disabled) in msconfig. I had a glitch after installing sp1 that caused BSOD after login. After disabling startup and services i was able to login in normal (selective)startup. My question is whether the entire list of ms corp services need to be enabled or should i select a core set . I have been starting the ones I recognize and what not , but is there a windows 7 setup suggestion list or possible list of core services to enable.
I'm trying to sort out issues with my Windows 7 machine and want to disable/set to manual services that I know are not needed, but every time I have done this in the past (a while ago now) I invariably run into an issue where I've inadvertently disabled a service that was needed by something, and I end up scratching my head (as all of my hair falls out around this point) and enabling everything just to sort it..
Is there any utility that anyone is aware of that lets you toggle service status, with the option to reset to default or reset to last status, while showing a list of services that I've changed?
I can't seem to word it properly for a search engine to find relevant results, and find usually specific services and not something I'm hoping exists.
I wish the Services.msc mmc had a checkbox or some sort of flag to show altered services so you could sort them by that, which would help a lot, but it doesn't.
Recently we have been hit by some spam in our blogs and on the site in general about commercial software to reset Windows passwords. This is clearly spam and always plugs some product to magically reset your Windows password. I'd like everyone to know that these advertisers have been removed from the site for abusing our system. There is a very simple, and concise way to reset lost Windows passwords which is documented several times on this site.Using this free product: Offline NT Password & Registry Editor Unsolicited advertising violates our terms of service agreement and is misleading to our members. The truth is, with the right CD image, anyone can properly reset a Windows password easily and effectively, without any costs associated with it.It simply requires reading the documentation of the Offline NT Password & Registry Editor utility created in open source. We confirm this utility works in Windows 2000, Windows XP, Windows Vista, and Windows 7.
I have a problem where if I ever change my view in an explorer window it will never stay to what I set it to. It doesn't matter which folder I change, the folder will always reset back to the "Details" view as soon as I leave that directory. I've tried rebuilding my icon cache using this guide, Icon Cache - Rebuild, but it didn't fix the problem. I even did a windows upgrade so all system files would reinstall, but again, that didn't fix the problem.
here a very strange problem that happen JUST with ONE user. All the other users, administrator included, do not have this problem.So I think it is not a system wide problem,just one user (ME, sadly) problem.I pretty much tryed a lot of stuff to try to fix this problem, without no luck.Here what happen.Desktop icon problem,when I do log on or logoff (or when I do reboot the computer and I do load the affected user) icons reset, themeself on the left side of the desktop and with the Aligne Icon to the Grid. And NO, the View/Automatically place the icons (or something like that, I do not use English language) it is not selected. Also if I select any option, they are always resetted to an evident "default" for my user I never ever configured.Folder problem. It is similar and probably connected to the other problem, like a particular switch loaded on this user and just this user that reset everything to this default I never choosed. If, for example, I do choose to personalize folder details (example to have both date changed and date accessed for a folder), it will work for as long as the window stay open, then If I close and reopen it, it go to a default and that default is not choosed by me. This happen for any folder.
OK I'm not sure what happened but I'll try and explain. So last night I shut down my computer like normal and this morning I started up the computer like normal and it looked like everything was fine. The swirling windows logo showed up like it should but right after that it said windows is preparing to start a new session or something along those linesAfter logging in it seemed everything was set to default, all my programs and files were there but everything was reset. When I clicked on the start button you usually get a list of recently used programs above the list all programs button but there was nothing there. Also the task bar was empty as well. I did a restore and it seemed to fix the problem but I'm just wondering why it would do that just right out of the blue.
I got this sexy pc my man built me less than a year ago and it's been working fine (or maybe I haven't noticed before) but in the past few months the clock is resetting every time[i] I reboot. It seems to lose time over a couple hours of just being turned on as well. It's a very stealthy process so I haven't actually seen it do it, but all of a sudden I'll be late for work again, and blaming my pc has become a lame excuse. I've read topics on this, my motherboard battery is dead, but it's not only on reboots as it happens every day and I barely ever turn it off. Anyway. If it is the mb battery, how do I find this out? It's my gaming pc if that matters in any way and my motherboard is the hot Sabertooth x58. I'm running windows 7 ultimate.
My real issue is that I forgot my User password for the only, and hence, Administrator account on my laptop. I was going to try and do a system recovery from my Sytem Image back up, but I can't access the System Repair boot menu without the password.Alternatively, any information for reseting/removing an Administrator User account password for Windows 7.
On this computer, I installed Dropbox last week, when we installed Windows 7. Ever since then, when the computer boots into Windows, the setup for Dropbox appears. It only does that on this computer.
I have Windows 7 Pro 64, with two accounts, both admin.A few weeks ago I tried to update one of the passwords (change it from Pass1 to Pass2, for example).I was able to do it, log off and back on using the new password. All worked fine.However, as soon as I rebooted the PC the password became Pass1 again. I tested it several times.... always the same behavior.I also tried the password reset CD... the result is the same.
My computer keeps lowering the resolution everytime its restarted. When i click detect it increases back to what it says the recommened resolution should be. Any ideas of what could be wrong?
The pc showing in my 'spec' profile is a new build, its been running great for about a week.I opened it up to drop in another 4 Gig of RAM and a Light (tiny little blue tube thing, just to give it a nice glow) and as far as i knew all was great.It was on last night, when i got up this morning all was still great. then at some point this after noon it had reset and stuck in the 'loading OS' screen saying BOOT (something) not found'.I immediately turned off the PC, opened it up and checked all was well, it was, so, i turned it back on. all was fine (apart from the usual 'windows did not shut-down correctly screen) so far its not done this while ive been sitting using it then later today i was streaming a TV show over to my playstation (PS3 media server) and about 20 mins in poof, the PC was resetting.It did it twice more.I have since removed the extra RAM I added and with or without it i am still having this strange issue. as it the only clue i had was the hard drive i have turned off the option to 'put hard drive to sleep after X mins' in POWER options.
I have some technical difficulty in fixing the Realtek Driver. I recently bought the ASUS P8P67 motherboard (BIOS version 1204) and installed the provided Audio driver that came with the box which is version 6.0.1.6196. Other specs displayed in Realtek info page is
DirectX version 11.0 Audio Controler : HD Audio Audio Codec: ALC892
I am running Window 7 Ultimate on x64 bits with the Sandy Bridge i7-2600 core. Noise Suppression and Acoustic Echo cancellation are disabled.
My problem with this driver is that from time to time, the volume on the Realtek mixer drops down immediately as shown on the screenshot.
Also, to certain programs that I am using, like Battlefield 2, the volume keeps resetting to very low even though I set it to volume level 28 before I closed the program. When I stop the recording or I closed the Midomi website (from screenshot), the tab drags back itself to 28 for iTune and the music played back at normal volume
How can I disable Realtek from keeping resetting my volume to low for the programs that I am using? Is this a bug? I tried reinstalling it did not fixed the issue. I tried putting the system volume to 28, and tried recording but the bug still exists.
I tried looking around the forum, but it seems to all point to the BIOS. My BIOS has been cleared which indicated clearing it again will not fix the problem.
I'm at the end of my rope with my volume issue. I'm running Win 7 64 Pro with a Creative X-FI Gamer card (latest drivers).
The issue: Master volume keeps resetting to 30%. Noticed it happens when I bring my PC out of standby, and when I run certain apps like Creative's sound panel. I've tried the "Do Nothing" option on the Comms tab, and also tried unchecking the Exclusive Mode options which give apps direct control over the sound card. Nothing works.
Is there a way to set the master volume in the registry and/or create a task which runs periodically to adjust the volume to where I want it?
How do I reset My Pictures to the default setting?
Since installing the latest update for Photoshop CS5 all of my pictures have the CS5 icon on them and when I click to open the picture it opens in Photoshop.
In order to change my password a service provider had to reset my modem.I can go on the internet with my desktop, but I am having difficulties going on the internet with my laptop. It seems that my wireless router has to be reset also but he can't do it because it's not one of theirs. He did explain to me though that I have to put the I.P. address into the browser in order to get on the router's brand name and so on, which I did but I don't know what to do next. My router's I.P. address is 192.168.0.1 It is a NEXXT Nebula 150?
I've had Windows 7 Home Premium installed for less than 2 weeks now and this is already getting on my nerves! I do NOT want my monitor to turn off if I leave my PC idle, so in the Power Options I have chosen 'Never' for 'Turn off the display'. However it keeps resetting itself to 20 minutes and turning off the monitor after that amount of time anyway! I first of all set this for the Balanced plan and I have also created my own power plan called 'Always on' and made sure the options are set to Never - but in both cases Windows is overriding my settings I have chosen - why? I also don't want my PC to lock when I resume from hibernation, so in the advanced settings I have changed 'Require a password on wakeup' to 'No', but that keeps resetting itself to Yes as well!
Its not working for me,ive followed the tutorial here to a T twice and both times it does seem to work then a while later all the old history is back,and yep thats after deleting inside them folders etc?
After problem with my pc, I had reset my Bios.Now my pc starts very slow and I've lost my Bios-configuration, does somebody how I can get my old configuration back?
I allowed the Norton Internet Security folks to have remote access to my netbook and now value of the following keys have been locked in these resets.
[code]...
That appears to be alternate or maybe hotkey settings? Anyway, Norton declines to fix their mess, so I have to muddle through. How to go back to default key values on the keyboard? I'm using Windows 7 on that machine.
I have an Acer aspire laptop its about 3 months new and recently it hs been slow and freezing and yesterday I got 2 plus screens with words on them and this morning it kept messing up and so I cicked the restart button and now it will get to were it boots and it says Acer on the screen with an F2 option and then reboots to it again in a loop what do I do!?
I had an issue with my laptop,it crashed on blue screen and for some reason would not re-start - The only thing that I could do was to reset my laptop to it's factory settings.Since I have done this.I can't seem to find any wireless access points and cannot connect to my wireless router - the onlt way i can connect is through wired connection.I have tried to enable wirless by pressing my F8 key which stated that wireless is on but on programmes it says that no wireless is enabled - its like i've lost wireless altogether?
Tech Support Guy System Info Utility version 1.0.0.2 OS Version: Microsoft Windows 7 Home Premium, 32 bit Processor: AMD Sempron(tm) SI-42, x64 Family 17 Model 3 Stepping 1 Processor Count: 1 RAM: 766 Mb Graphics Card: ATI Radeon HD 3200 Graphics (Microsoft Corporation WDDM 1.1), 256 Mb Hard Drives: C: Total - 75999 MB, Free - 63848 MB; D: Total - 76224 MB, Free - 10046 MB; Motherboard: TOSHIBA, NBWAE Antivirus: McAfee VirusScan, Updated and Enabled
The problem I am having is that whenever I log onto my computer, I can see that the date and time at the bottom right of the screen always seems to reset to 31/12/2006. I always try to fix this by going to the option where you can synchronise the date and time with the Windows server time, however, this doesn't always seem to work.Another problem I am encountering is that the computer itself seems to be cutting out at different times, for example I could be 98% complete into a full system scan with Kaspersky 2012, but the computer suddenly cuts out, this would also be the case when browsing the internet or completing some Word documents. One other thing to mention as well is that since these problems have occurred, whenever I turn on my computer, I never have to press the power button on, as it seems to turn itself on whenever I switch the power supply on. This is also not normal.
I installed a program the other day that messed with my Windows Explorer. Now no folder will remember it's View options (Large Icons, List, Details), they all reset to their default.
As you can see it's nothing to do with Libraries. Neither the 'Shell Fix' nor editing the registry at
