"The Restore Point Could Not Be Created For The Following Reason:This Service Cannot Be Started In Safe Mode (0x8007043c)"
Oct 7, 2011
I cannot get system restore to work...when i try to create a restore point i get this error message:"The restore point could not be created for the following reason:This service cannot be started in Safe Mode (0x8007043c)"I am NOT in safe mode. I have loaded in the usual way but somehow "Restore" believes i am in "Safe Mode"I am also unable to create any backup disks because i get the same error message (Cannot create in Safe Mode).
MS Windows Home Premium 64 bit
AMD Athlon X2 Dual-Core QL-65
3.0 GB Ram
ATI Radon Graphics
I have win 7 do not start on safe mode and last says auto check not ok.when i escape it goes back to reboot on same status. The same is taking place on win vista too but vista do not start on safe mode but never say about auto check...I accept it might have happened as i was trying to some programs taking ownership...could fail in proper applying.....my compuer name is same in both window with two different drive in system ..Drive C has vista and DRIVE D HAS WIN 7?
I've installed Windows 7 SP 1 last month, can I clear the system restore now? It used up about 5GB of my disk space...Is it safe to clear the restore point and keep the latest one? Or I have to monitor for a couple month before clearing the restore point?
So, I have this system, and it bluescreens when I boot in to both "normal" and save modes, however it reboots instantly, so I can't see the error. I have gone into recovery console, and there are no system restore points. Windows cannot fix the startup "Automatically"
I'm currently using a windows 7 computer and am having trouble accessing system restore. As I start up the computer normally, I make it past the login screen to the main screen, and it freezes after a few seconds each time. Going on safe mode instead, I went to system restore only to find that is was turned off as well my network connections
I have a Sony Vaio which runs on windows 7 (don't know if it's 32 or 64?). I don't have any back up discs.
Computer started doing windows updates, when I turned the laptop on the next day it won't boot up normally or in safe mode. If I click on repair computer it scans and goes through the process but in the end it just takes me back to the same screen. I've tried to restore and I have several points come up in the list but it says beside them enable system protection for this (C Drive).
The only option I have is to put it back to factory settings which I would really like to avoid as I don't want to loose all my files. I have some of them on USB but not all.
I left my laptop running for a while when i left the room. When I came back it had frozen, I hadn't been doing anything untoward, I had been running a few programs at once, just like firefox and word. Anyway I had to turn it off with the power button. Then when I tried turning it back on I was able to log in but there was no desktop, just a black screen, same thing when I used safe mode. Now whenever I turn it on it goes to a disc check and when it gets to a certain number it says its unreadable and safe search just plain doesn't work. I'm gonna lose all my files. So is there anyway I could do a restore to factory settings (restoring to another time also didn't work)
After a power outage, my windows 7 will not boot without going into safe mode.How can I restore my system to boot automatically without going into safe mode.
I am familiar with System Restore, selecting earlier times, and the often-available option of undoing a System Restore. But I found out (too late) that according to Microsoft, System Restore done in Safe Mode is not able to be undone.I lost 1,000's of photos doing the system restore, now the only restore point option visible is what I believe to be the new one after I did the restore. Prior to me doing the System Restore, there were a number of times from me to choose from, I just chose one that was 10 days ago. Is there any software, method, or hack that I can use or do to recover the thousands of photos that were on my desktop and that were in folders on my desktop? It's a 1 TB HD?
I have recently installed windows ultimate x64 on my computer.i have an asus p6t deluxe v2 mobo, i7-960 cpu and a wd velociraptor hdd. The install went ok, I even managed to restart my computer a few times after but after windows updates installed it won't boot. I tried to boot into safe mode, restore from the installer, and repair, none worked. After startup repair it says: "a patch is preventing the system from starting" and I get a 0x1f error code.(Preventing windows from downloading any updates didn't work either)
On this recent windows update, 2/14/13, my computer froze on the "Preparing to configure windows" screen for several hours. I rebooted normally and the screen went to "configuring updates" and stuck at 67% for about an hour. I got frustrated with it and rebooted to safe mode to see if I could do a system restore and when I did it said there was no restore point back up! So I rebooted normally and now it is still just sitting on the "Preparing to Configure Windows" screen with the circle spinning. I am using Windows 7 Ultimate on a Dell Dimension 2400.
System Restore will not create a restore point or restore to a previous date & time.The error message was: A restore point could not be created: An error was detected in the Volume Shadow Copy Server (VSS).The problem occurred while trying to contact VSS writers. Verify that the Event System Sevice and the VSS service are running & check for associated errors in the event logs (0x80042318).Volume Shadow Copy is started & running (done in system events).Event System Sevice and the VSS service are started and running. But no cigar, SR still broken.
I dont know what happened to me suddenly my antivirus AVG 2012 detect an intruder on the web browser and remove the browser morzila and after that I have no restore point but i dont know what happens and I feel that my PC has something strange how I can solve this problem?
I wouldn't go so far to say, I'm totally computer illiterate, but not far from it.. If there's anyone out there, who's up for a challenge I'm running windows 7. I am the administrator. Someone I don't trust at all, used my PC a while back. After he (did whatever he did) I noticed I couldn't access several files. I get a "access denied" or you don't have permission to view this file, owner info etc.. I can see a lot of the files, but their either empty now or I can't view them. I have used restore many times in the past, but now I get a message " no restore points".. I don't know what he did, or if he did anything.. It could be one of my kids changed properties by mistake, before I wised up and created a basic user acct w/ limited access for them.. I almost forgot. When I go into file properties there is a red x by my user name (administrator) Not in every property, but several.. Sometimes there is a red x by other user names, as well, but mostly mine.
I recently installed some updates in my Proline notebook, but after installing the 30 percent, it failed to restart, with the screen showing nothing (as if it's off). I then tried to restore it to an earlier time via safe mode but the restore point available is only the one as at the time of the update. I tried to create a restore point, but when i tried, i cannot even find system protection when i looked for it and it directs me to system properties where my computer's description is blank and it cannot be edited.Even the updates cannot be uninstalled via safe mode.Is there no other options i can try in order to start my laptop normally again?
After attempting to start my Laptop in Safe Mode, it loaded drivers normally only to crash a few seconds later. A prompt message appears but is impossible to read because Windows immediately reboots upon showing the prompt.
XPS L401X Base Genuine Windows(R) 7 Home Premium 64bit (English) Intel(R) Core(TM) i7-740QM Processor 6GB 1333MHz DDR3 SDRAM (1 x 2GB + 1 x 4GB) 640GB 7200RPM Hard Drive
Lately whenever i try to start my computer it pass the Dell Bios and then directly goes to the screen which states Repair your system or Start windows normally When i chose repair system , it start downloading windows files and then launch the windows , but hung up at the sky blue login window with only movable cusor . When i choose to start windows normally it gives me BSOD momentarly ( hard to see the message) and then restarts again . i tried with the advanced boot up options like repair my computer , all safe modes , restore to last good configuration but it does the same and hangs at windows loging sky blue window .I Tried to run the Dell PSA+ Diagnostic and it returns with 2000-0146 error . As per the Dell online solutions for this type of error ,I tried to reinstall the Hard disk but the problem still exist.
I've searched the forum but most error text is different. Mine is simple.. It says Quote: Windows cannot start Diagnostic Policy Service on this local computer.
Error: 5 Access is denied I've tried multiple things however I cant get it fixed.. I tried system restore but system restore took 4 days and SURPRISINGLY, the restore failed..
I have been have some problems with my HP dv 8500 laptop. It has vista on it. I could not get any windows updates. So I backed up my files to a flashdrive and did a system recovery. I have files on the flash drive but cannot transfer them back to the laptop. I would love it if someone could guide me through the process.
after i managed to remove a virus on my computer (system defender) i get this message to turn on the windows security center service, but when i try to do that i get the message "the windows security center service can't be started".. the security center properties is on automatic... but the message is still on.. i tried to do a system restore but it doesn't give me an option date before the virus attack. i have windows 7 home edition..
I can no longer search in outlook. I've traced this back to the search indexing - if I go to control panel > indexing options it states "indexing is not running".Sure enough, if I go to services the Windows Search Service is stopped (even though it's set to start on "automatic (delayed start)")If I try to start it manually it says : "The Windows Search service on local computer started and then stopped. Some services stop automatically if they are not in use by other services or programs".Goggling the error takes me to this very specific microsoft support article which covers exactly this error: Windows Search Service will not start, Error: "The Windows Search service on local computer started and then stopped. Some services stop automatically if they are not in use by other services or programs".The article states the solution is to delete all the files in the "C:windowssystem32configTxR" directory. But I tried this and only some were deleted, but 3 remain as they were "in use".I've googled around for ways to delete locked files, and tried every trick in the locked files book - but I just cannot get rid of these 3 files - and if these files are what's stopping the search service from starting then apparently I'm screwed...
I've tried deleting them using an admin cmd prompt, safe mode with command prompt, removing the system/hidden attributes etc etc, even lockhunter gave up on these files complaining that it was the system that was using them so it couldn't delete/rename them or kill the locking process.I use the outlook search all the time (I have zillions of stored emails) and not being able to search is a nightmare...
I have installed Itunes version 10.3.1.55 on my computer(windows7 x86), and since that Itunes refuses to sync to my Iphone. On the previous versions of Itunes everything was just fine. I went to the Service pannel and when trying to start the AMDS and I keep gettng this error "Windows could not start the apple device service on local computer : Error1067"...I've googled the matter and seems like no one on the blogs I visited got this figured out...Apple support is even worse,they keep telling you to install and the uninstall itunes, delete temp filesetc and try the whole thing back again..
I have had this problem for quite a while. I'm able to create restore points (and they show up in the list), but I'm unable to 'restore' them... I get the system cannot restore error. I have Norton-Comcast and have deactivated 'tamper protection' with no luck.
I am trying to connect to the work Windows Server 2003 using my standalone computer running Windows 7 Pro 64, the wireless and remote desktop is working fine but when I try to map a network drive the error I receive is "An attempt was made to logon, but the network service logon service was not started".
I have a program running that automatically syncs some of my data online. It is running on a computer with Windows 7 Pro as well as a Windows Server 2003 that I use as for file storage. Unfortunately it does not startup until I log into a profile, but since I don't really use these computers, sometimes this doesn't happen for days on end. I decided to create it as a service (used the sc.exe utility - sc create DataBackup binPath= "C:Program FilesData Deposit Boxackup.exe" DisplayName= "Kineticd Backup" start=auto). The service was created successfully, but when I try to start the service, I get the following error.
Error 1053: The service did not respond to the start or control request in a timely fashion
I reinstalled Windows recently, but it used the same boot partition from my old installation. I got rid of the old partition (it was on the wrong hard drive) and created a new one with the repair disc. Windows boots, but won't install updates. Bcdedit outputs The boot configuration data store could not be opened. The system cannot find the file specified.
When i try restoring my win 7 (ultimate 32bit) by the system restore, it say's it was disabied for security reason. i re-enabled it, (with or without creating restore point), and after some days its disabled again.