I have windows 7 home premium genuine.When I purchased ,there was only one drive 'C' but now I want to make partitions , pls inform how can I do that as I also want to install again same window ?It may increase the system performance.My laptop specs are Dell inspiron n5110 , core i7 , 4gb ram , 500 gb hard disk , 1gb nvidia graphics
View 2 Replies
I have a 500 GB Hard Disk.I want to make 9 partitions of various sizes & Install Windows 7 64 bit ( Ultimate ) in the first partition.I installed this Hard Disk as slave to my current Hard Disk & tried using disk management but it makes all partitions as Primary & doesn't give me a choice to create an extented partition within which I can make 8 Logical partitions.
I have very limited knowledge of Hardware.Also do I need to make any partition active & if yes how & what does active do ?
Basically what i want to do it to select one, two or more folders in my primary computer and replicate them in another computer, for example:Everytime i save any file, lets say 001.jpg into c:photos, it would also be saved into \192.168.1.xxxphotos as well!Can this be done with windows alone, some batch file, or will i need a third party software?
View 2 Replies View RelatedI can open and save previously created WordPerfect X3 documents on a computer running Windows 7 Home Premium 32-bit but when I want to create a WPD on the same computer I get a Perfect Fit Document screen and it will not save. I can't download Xp mode with Home Premium and don't need Professional or Ultimate features.
View 5 Replies View RelatedI want to make 3 partitions. The first one will contain Windows 7, the seond one xp, and the third ubuntu.
View 7 Replies View RelatedI recently bought a dell inspiron 14r laptop. It came with windows 7 Home premium which was pre-installed. The problem with it is, the whole 640GB was allotted to a single drive C. I want to repartition the hard disk into 6 drives. But they didnot gave me the windows 7 installation disk or its serial. What should i do now? I had created the recovery discs using the manufacturer's recovery media.
View 4 Replies View RelatedIs there a way to make a bootable recovery windows XP CD from a laptop running windows 7?
View 1 Replies View RelatedHistory only saves visits to files etc. on the computer, not anything visited on the web. I've tried to find the answer in older posts but all I found was this.
View 3 Replies View RelatedHow can i make IE9 save web pages in a default format So, anyways, is there a registry hack anyone has made for IE 9 that can force IE 9 to stop choosing mht as the default format? I am sick, have been for years, of switching it to htm. It's also noteable that more webpages on IE are able to saved in mht form, rather than htm (and firefox can save any ANY page in either format). It's as if Bill Gates had a mht fetish and decided we should all go by his ways.I'm using 64 bit windows.
View 1 Replies View RelatedHow can you make all types of files show up in Open and Save dialogs?
View 3 Replies View RelatedOne of my friends has a windows 7 computer with an account for himself, his mother and his 2 sisters. All the home directorys are stored in drive C. Partition D is shared. The question is, how to get a partition layout like this?
Partition 1: OS + programs
Partition 2: home partition for himself
Partition 3: home partition for his mother
Partition 4: home partition for his sister
Partition 5: home partition for his other sister
Partition 6: shared partition for some photos.
how do i modify sidebar word 2010 save as save in ? i am running window 7
View 2 Replies View RelatedI'm just installed windows 7 on my 2009 imac through bootcamp. However there are some problems. Ive noticed when i try to play something on windows media player it will tell me that my computer is running low on memory and to close some windows. Also games run poorly if at all. I suspect its a driver issue but have gone through all the auto updates etc.
View 4 Replies View RelatedI changed via the dialog the TEXT SIZE via the screen resolution in the control panel to CUSTOM SIZE.With one of the newer "Cinema" or Very Wide screen (1680 X 900) displays after I'd increased the text size to over 160 % I didn't get the possibility to SAVE any documents any more via the SAVE AS button. The SAVE dialog would appear but the SAVE button was missing.The effect was noticed in Office 2007 (all programs) Notepad etc etc.Seems to be a Windows fault as this should not be allowed to happen.on more traditional "Squarer" type monitors -- no problem.
View 3 Replies View RelatedIs there any way to set the default save location folder for downloads in IE8 to the last folder that the same file type was saved in? It makes no sense to default to a single folder and have to browse through to the desired folder for every single download, so I assume there has to be an option somewhere.
View 6 Replies View RelatedI am running into this issue of having complete access to one PC running windows 7 from another one that is also running windows 7. One of the PC's is a windows 7 pro 32 bit and the other is window 7 ultimate 64 bit. I have had them setup with public and dedicated folder sharing. But from time to time I find that a file I want to get off one or the other was not saved to a shared folder. I have been looking for a way to allow complete access from one PC to other one (going both directions). I use 2 PC all the times and it really depends on where I am in the house as to what one I am using as one is laptop and the other is a desktop. They are both on the same network. It is just one of the strange things that I have not been able to find a way to get complete file access without the use of software like Teamviewer or others like it.What I would like to do it just go to the network location in the windows explore to get the files I want from the other PC.
View 5 Replies View RelatedWhat is the policy for Removable USB Drives in Windows? Does it only recognize the first partition? Is there any difference between FAT32 and NTFS? I am asking because time to time, I am not able to see the partitions in Windows, and I wanted to learn about its policy (rules I mean) about Removable USB Drives (What I mean is Flash drives I guess, when the USB Drives are connected; it is not showing up in the drivers, but in Removable Devices).
View 9 Replies View Relatedim due a fresh install of Windows 7 64bit the way i do this is to make a copy of my existing OS and put that on a second drive, i then keep this and use it as my main OS, i then put a new copy of Windows 7 on my main drive and move the stuff over from the back up that i want to keep, this way i know i wont lose anything. this time i want to partition my main drive and have dual boot one for normal use and one for gaming but when i did the back up the hdd drive i was using had a partition on it and the OS told me that i had to delete the partitions so i could install Windows 7. is there something i need to do first to be able to have 2 OS's in 2 partitions on one drive or is it just not possible to do?
View 4 Replies View RelatedOn a Toshiba latop I suddenly have 2 WIN RE partitions?? One with more on it than the other! can I delete the superfluous one and dlete the RE name in the obvious System partition?
View 2 Replies View RelatedI agree that to run DOS stuff on Windows 7 a DOSshell is the way to go, but I had a DOS and Linux partitions setup before I installed Windows 7 and guess what, it doesn't see them at all! It seems like Windows 7 isn't backward compatable at all, or perhaps doesn't read FAT16 (EXT3 I didn't expect it to read), will check FAT32...Yup reads FAT32 from USB sticks, but reads FAT16 from USB Sticks, just not FAT16 first partition (MSDOS6.22) from the main SATA drive (C: is the fourth and last partition).
View 1 Replies View RelatedI have question regarding shrinking of partitions in Windows 7 !I am unable to recover windows due corruption of OS. I have only single partition in which Win 7 is installed. Can I somehow shrink the partition to create Unallocated space to perform a parallel installation to save my data?
View 4 Replies View RelatedI installed Windows7 Ultimate from scratch, and it warns that it might create a 100MB partition before creating a second one where the real stuff lives. This makes imaging more complicated.
Code: # fdisk -luDisk /dev/sda: 320.1 GB, 320072933376 bytes255 heads, 63 sectors/track, 38913 cylinders, total 625142448 sectorsUnits = sectors of 1 * 512 = 512 bytesSector size (logical/physical): 512 bytes / 512 bytesI/O size (minimum/optimal): 512 bytes / 512 bytesDisk identifier: 0xf1f75308 Device Boot Start End Blocks Id System/dev/sda1 * 2048 206847 102400 7 HPFS/NTFSPartition 1 does not end on cylinder boundary./dev/sda2 206848 30722047 15257600 7 HPFS/NTFS/dev/sda3 172908544 254828543 40960000 83 Linux
Does someone know why Windows7 needs two partitions, and whether it's possible to have a single partition?
I'm also interested to know if any steps are required before imaging Windows7 (sysrep, etc.) where the image will be reinstalled on the same host (own test machine).
I want to make partition on my hard drive. my hard drive is divided in to just one partition. i want to create 3 or 4 further partitions.
View 6 Replies View RelatedI have just deleted all partitions on my laptop hard drive to install windows 7 and messed something up...I know cannot install windows 7 as it just sticks at the setup is starting screen..can I put the drive in my pc (running xp) and save it somehow ? I have nothing on the laptop to repair or anything as far as I can see ...
View 12 Replies View RelatedI'm having a problem not being able to access 2 out of 3 partitions in an external HD.
Samsung HD753LJ (USB) 700GB
Partition 1: 200 GB / NTFS
Partition 2: 200 GB / NTFS
Partition 3: 300 GB / NTFS
I once had a dual-boot Windows XP Professional SP3 and Windows 7 Professional. Partition 1 could be accessed from both OS, but Windows 7 could not and still cannot 'see' Partitions 2 and 3. While it was still a dual-boot, switching back and forth between the systems was the only way I could access the data in Partitions 2&3 from Windows XP. Now that I have a clean install of Windows 7 only, (stupid me to have forgotten this problem) I cannot access the files at all. I have tried restarting the system, reinstalling the HD driver, replugging the HD, and the problem still persists. What I have managed so far:
> Under 'Device Manager'
>> No warning. All drivers are updated.
> Under 'My Computer'
>> Only Partition 1 is listed and accessible
> Under 'Computer Management' > 'Disk Management'
>> All three partitions are in the disk's table. The 2nd and 3rd partitions are listed with blue bars, total space allocated and no other information. An attempt to get Properties or assign drive letters produces an error message "... Disk Managaement control view is not up-to-date ... ".
> Under 'partdisk'
>> 'list disk' shows correctly sized Disk at 700 GB
>> 'list volume' shows only up to Partition 1 of the external HD.
>> After selecting the external HD, 'list partition' shows all 3 partitions with correct sizes and offsets.
> With MiniTool Partition Wizard Home Edition
Disk 1_______
G: Partition 1
*: Partition 2
*: Partition 3
>> All 3 partitions can be explored (whew ...)
>> The two 'missing' partitions were not hidden.
>> However, when assigning the drive letters to the partitions, the drive letters only stay in front of the partitions' names until I clicked Apply. After which, the asterisks came back again. (I haven't found any way to assign the drive letter in Partition Wizard Bootable CD
Windows 7 doesn't recognize my D partition though windows XP used to recognize it just fine on my computer, and it also used to work fine on that HDD using that same version of windows 7 on my old computer. My computer is a Dell Optiplex 745 and my HDD is WD10EARS (No Jumpers is being used) Here is a Screen of the installation Process
View 2 Replies View RelatedToday while listening to a song. My computer restarted with a BSOD. It then asked me to repair my computer saying that some boot record is corrupt. I repaired my computer from the cd. It works fine but now i can only see my C: and no other drives are being shown though the data is still there. I cant see the remaining three partitions in my computer
View 9 Replies View RelatedI have installed Windows 7 next to my old Windows XP (so it's a dualboot situation). I have 2 physical HDD's (320 GB each) and 6 logical drives (2 + 4 primary partitions, all NTFS). After installing Windows 7, two of 4 partitions in one hdd have become inaccessible - disk manager still shows them, but I can't neither set a drive letter, nor view properties. I get the following error:
"The operation failed to complete because the Disk Management console view is not up-to-date. Refresh the view by usin the refresh task. If the problem persists close the Disk Management console, then restart Disk Management or restart computer."
Both of the inaccessible partitions are fine in Windows XP. Any ideas or solutions ?
I want to dual boot xp and windows 7 on two different partitions. And I want to have an additional partition for programs and one for user documents. Is it possible for the two os's to have the same shared program files directory.reason for this is to save space instead of having different installs for each just have them both run off the same directory.
View 8 Replies View Relateddue to some personal issues i need to completely reformat the whole HD.. and for some reason when i try to do it it only lets me format windows partition and i want EVERYTHING to be gone.
View 7 Replies View RelatedI have a Asus Eee Pc 1005ha that i want to install windows 7 on. I'm running xp with a single hdd (149.05gb total) that has 4 partitions set up like this. C: 72.06gb NFTS (system), D: 72.05gb NFTS, PE: 4.89gb FAT32 (unknown partition), No Volume: 47mb unknown type (EFI system partition) this partition displays diagonal lines in disk management. I want to remove these so I only have one C: drive (149gb) where win 7 will be installed. How would I go about removing these during the install procedure? Should i just delete the no volume, PE and D: drive? Or should I delete all 4 partitions? Little confused on this rather ask before I do something wrong. From what I read the 47mb partition is the asus boot booster which speeds up boot time which I don't think I need with win 7.
View 9 Replies View Related
