Ignore UAC Prompts In App-V Client Machine?
Jan 16, 2012
I virtualized Gliem's TestPrep application using Microsoft App-V Sequencer and created the necessary files to install it in client machine.There is only one entry point(shortcut) for this app.After successful installation of this app in the App-V client machine , i tried launching the shortcut. it is working absolutely fine in admin login but when i launch the same shortcut in user mode. It is throwing me error message showing that i am using a limited user account.when i launch the same shortcut using Run As Administrator.it works fine...I tried changing the compatibility settings by going to properties of the shortcut and forcing the app to run in admin mode...still its not working fine...Tried __COMPAT_LAYER Env list in OSD still no joy.
View 1 Replies
ADVERTISEMENT
Oct 23, 2009
I'm trying to install Win 7 Pro into my main disk, which is partitioned into a Primary and an Extended partition, as follows:
Primary partition - one small FAT16 (sic!) partition, 1.5GB (usually C
Extended partition - various NTFS logical drives (usually D: onwards)
(This is just the way I've always done it in XP... then I can format compact flash cards to FAT16 for my camera and it's historically been useful having the small C: for a subsequent LInux multi-boot install.)
My problem is that Win7 ignores the FAT C: drive and installs Win7 into the first logical drive, which becomes C:. My small FAT partition does not have a drive letter assigned, it is simply ignored. Fairly early on in the install process, Win 7 informs me it is making changes to the registry - I'm assuming this is to remap the drives and remove the C: map.
I can subsequently assign a drive letter, although not C: (of course).
This is rather annoying... can anyone help? Is it possible to force Win7 to install to the D: drive, leaving my small C: intact?
View 6 Replies
View Related
Jul 31, 2011
How come I still receive messages from people on my ignore list on Yahoo Messenger? How do I make it so I don't receive messages from them?
View 2 Replies
View Related
Mar 9, 2012
I have my pc configured for music production. I have multiple drives installed (6 in total). The issue is this : the boot drive where windows 7 is installed is OK , but windows boot process freezes at the startup logo screen and does not go past this stage. After investigation I found out that when one of the other drives is faulty. Windows does not boot. If you disconnect the faulty drive .. then windows BOOTS normally.
No message is displayed during the windows startup phase. Is there a way to configure windows such that It ignores the bad drive at startup. It seems that windows waits for the drive indefinitely and jams there not timing up after some time.
View 7 Replies
View Related
Feb 19, 2009
Is anyone else with me on this? I run UAC high, prompts all the time, tis what i want. What i DONT care for is it being accompanied with a slight pause, then screen goes black for about 1/2 second THEN the prompt shows.
View 8 Replies
View Related
Sep 29, 2011
I am using CCleaner-64 bit and every time I use it, I am prompted if I want to allow the program to make changes to the computer. This is a real pain.
View 4 Replies
View Related
Sep 27, 2011
Administrator CMD prompts at Win7 Installation I was installing Win7. After the cd was booted and the file-loading was done. It went to a Win7 background with a cmd window popping up.
it says
Administrator X:windowssystem32cmd.exe
X:windowssystem32>
What should I do to pass through this or fix it? I'd Windows 7 for many times but have never seen this before. Is there any hardware problem or something else?
View 2 Replies
View Related
Jun 17, 2011
I use D3DOverrider, and I have it set to start with Windows. The problem is that UAC prompts me to allow it on every startup. How do I give it the privileges it needs for UAC to leave it alone?
View 6 Replies
View Related
Dec 24, 2012
Having Windows 7 for a month now, I notice the prompt to "backup" my system every week. I began the process when I got the first prompt a couple of weeks ago and did the backup accordingly, but I'm wondering how urgent it is to do this every week? I use my PC for browsing and for my home budget (MS Excel which I back up to disc each week) but for little else.
View 9 Replies
View Related
Oct 25, 2010
I've got a desktop computer with XP Pro SP3 and a laptop with both XP and Windows 7(dual-boot). These two computers are connected through a router in a network(desktop comp-wired, laptop-wireless). Everything works fine, except the sharing in Windows 7. From the desktop computer I can access all resources on the laptop without problems. From the laptop, everything works fine too, when I try to access the desktop computer's shared folders and printers, but ONLY FROM XP. Every time I want to do this from Windows 7, I'll be prompted for a "network password". I have no idea what I had to enter - I did a search over the internet, and found following suggestions:
-turn on network discovery, file and printer sharing, public folder sharing at the Advanced Sharing Settings, and disable password-protected sharing
-both computers are in the same workgroup
-disabled the limitation of blank passwords in the group policy editor
NOTHING WORKED. (firewall might not be the reason, because I use Windows Firewall, and it's configured to enable sharing)What username/password do I have to enter, or how could I access the resources without a password?
View 2 Replies
View Related
Apr 22, 2011
for internet explorer 7 how do I disable the prompts to let or not to let the scripts run
View 1 Replies
View Related
Mar 28, 2011
I want my users to allow Adobe & Java updates but it keeps asking for an admin login. How do I set my Windows 7 PCs to allow users this simple task?
View 10 Replies
View Related
Jan 4, 2012
i have Lan, all computers are windows 7 proffisional and one machine is windows 2003 , workgroup . i made shared folder in windows2003 , some computers can access the shared folder and others can not.when i open network , i see the 2003 computer, when i try to access it , it asked for user name and password. the user is administrator for all , when i enter the user and password from many computers in the lan it is work correctly but in one machine with the same settings its says , you have no permession to access this computer.
View 3 Replies
View Related
Sep 22, 2010
I have de-commissioned an older machine that I had installed W7 on, I wish to install the W7 from this machine to another, is this possible -if so how?I think I have read somewhere, that once W7 is installed on a machine - it can NEVER be used on any other machine, is this correct?
View 1 Replies
View Related
Jul 31, 2009
I have Windows Seven 7600 and i'm trying to share files with a XP SP2 machine!
Problems:
-XP machine can see Seven machine but can't access shared folders!
-Seven machine can see XP machine but when i'm trying to see shared folders it gives me an error(see on screenshot)
-Network map doesn't work(see screenshot)
-Both machines have same workgroup MSHOME but when i go to homegroup it says there is no people in the homegroup!(see on screenshots)
Other info:
Before i couldn't turn network discovery on,every time i was set it to on he was going to off so I searched on this forum(great forum) and finally i was able to turn it on,maybe others have this problem so there what i did:i go to start=>run=>services.msc and i turned on(also i switched them to automatic startup) these services DNS Client, Function Discovery Resource Publication, SSDP Discovery, and UPnP Device Host services.
IPv6 currently is enabled!
View 9 Replies
View Related
Feb 20, 2012
I replaced an XP machine with a Win7 machine. When I VPN into our 10 network I can't get to any 192.168 addresses. The XP machine works fine only the Win7 doesn't. I looked at a lot of settings but I can't find anything out of sorts.
View 3 Replies
View Related
Jan 23, 2012
I have a small network of six computers. Five of them run XP and I just added a Windows 7 machine. I've got a Microsoft Access 2003 database that all of the computers share that is hosted on one of the XP machines. The Windows 7 machine can access the Access database through the network just fine, as long as no one else is accessing it. However, if someone else on an XP machine on the network is using the file, it won't open on the Windows 7 machine. Doubling clicking the file on Windows 7 gives me the circling blue icon for a second or two, then nothing happens. If the XP user exits the database, then I can open it fine. Permissions on the XP that is hosting the database is set to allow everyone. And all the XP machines can access it at the same time.
View 9 Replies
View Related
Feb 6, 2011
ive got 2 computers hooked up to a router by Ethernet sharing an internet connection, the internet connection works fine for both computers. i would like to share documents also between the computers
-one is a windows xp 32
-one is a windows 7 64
ive set up many networks in the past with a bunch of xp machines without any trouble but now i am having trouble my first step was on the windows 7 machine, i went to control panel -> network and sharing center -> setup a connection or network -> set up a new network this is where i believe i am making a mistake of some kind, it seems that the windows 7 machine is assuming that i want to set up the network wirelessly, when it is connected to the router via Ethernet. it simply brings me to a screen that says choose the wireless router or access point you want to configure, and hangs there with a greyed out next button everything seems to be going fine on the xp machine, i created a new network called "share bear", told it that the computer connects through a residential gateway, enabled file and printer sharing, rebooted the machine, and confirmed that there was a new folder in the network places for shared documents..i went back to the windows 7 machine where it was still hanging, rebooted it, looked for the new network in network and sharing center and it wasn't there, i tried again to "set up a new network" on the windows 7 machine with the same hanging screen
View 4 Replies
View Related
Aug 18, 2009
I have a small three PC home network. Two PC are running Windows 7 and one running Vista.
All three machines have the same homegroup settings. The ability to view machines on the network is very patchy. One machine can see the others, while another machine can only see one other machine. Sometimes machines cannot see any others on the network.
All machines are connected wirelessly with strong signals through a BT 2700HGV Business Hub router. All of the machines can access the Internet without problems.
All machines run Eset Smart Security with the Windows firewall is turned off.
Any advice to create a stable network would be appreciated.
View 9 Replies
View Related
Aug 7, 2012
well i'm try to copy files from my xp machine to my win 7 machine i can see the xp machine but i get a message that says "make sure that the xp machine allow incoming connections for file sharing" and i have done just that i think but its a no go i've just about everything.
View 1 Replies
View Related
Sep 23, 2012
I connect to a remote machine C from Machine B which is connected from Machine A, How can I send ctrl+alt+end to remote machine C ? I cannot access m/c C from m/c A, I need to go through B to access C.
m/c A --> Remote destktop to m/c B --> remote desktop con m/c C.
View 2 Replies
View Related
Dec 17, 2012
Installing W7 using an old HDD on an old machine to install W7 on a new SSD to be used on a new machine.I'm currently using this old machine from '09 and its performance levels have died down a lot. I bought all the components to build a new machine except I didn't want to spend extra money on another HDD to install the OS on my new 180GB Intel SSD. So basically, I want to use the HDD from my old computer, install W7 onto the SSD, then transfer the drive to my new computer, and use it on the machine and just reinstall all my other files.
View 5 Replies
View Related
Feb 6, 2011
ive got 2 computers hooked up to a router by Ethernet sharing an internet connection, the internet connection works fine for both computers. i would like to share documents also between the computers
-one is a windows xp 32
-one is a windows 7 64
ive set up many networks in the past with a bunch of xp machines without any trouble but now i am having trouble my first step was on the windows 7 machine, i went to control panel -> network and sharing center -> setup a connection or network -> set up a new network this is where i believe i am making a mistake of some kind, it seems that the windows 7 machine is assuming that i want to set up the network wirelessly, when it is connected to the router via Ethernet. it simply brings me to a screen that says choose the wireless router or access point you want to configure, and hangs there with a greyed out next button everything seems to be going fine on the xp machine, i created a new network called "sharebear", told it that the computer connects through a residential gateway, enabled file and printer sharing, rebooted the machine, and confirmed that there was a new folder in the network places for shared documents.i went back to the windows 7 machine where it was still hanging, rebooted it, looked for the new network in network and sharing center and it wasn't there, i tried again to "set up a new network" on the windows 7 machine with the same hanging screen.
View 3 Replies
View Related
Feb 5, 2012
I am using MS Virtual PC v6.1.7600.16393.I had created a virtual machine on my system, which has been deleted now, but I have .vhd file created for that virtual machine.Now I am trying to create a new virtual machine by using the previous .vhd file.Unfortunately, when I start this newly created virtual machine, it asks to Insert Boot Media in selected Boot Device.I want to retrive few of my data stored in previously created virtual machine.
View 1 Replies
View Related
Jan 1, 2012
Im trying to install the IRC client Bitchx through cygwin. Gets through some of the ./configure and stops at this.
checking for getpgid in unistd.h... no error message or anything just hangs.
View 1 Replies
View Related
Oct 12, 2010
I'm trying to vpn client 64bit for windows 7 and everything seems in install fine, however after I try to launch it starts the connect and then just stops.These are the messages in the log file. password is correct.2200:04:58.630 10/12/10 Sev=Warning/3IKE/0xE3000057The received HASH payload cannot be verified2300:04:58.630 10/12/10 Sev=Warning/2IKE/0xE300007EHash verification failed... may be configured with invalid group password.2400:04:58.630 10/12/10 Sev=Warning/2IKE/0xE300009BFailed to authenticate peer (Navigator:915)2500:04:58.631 10/12/10 Sev=Warning/2IKE/0xE30000A7Unexpected SW error occurred while processing Aggressive Mode negotiatorNavigator:2263)
View 7 Replies
View Related
Mar 30, 2011
my boss asked me to download the 3.5 Client Framework. I can only find just the standalone installer for 3.5 (Which errors on us). Im not exactly sure what he is talking about i was wondering if someone could please explain the difference and provide a link(Ive been looking).
View 4 Replies
View Related
Dec 6, 2009
Given the limited options, what is the best,trouble free email client to use when having to transfer files from XP using Outlook and/or Outlook Express?
View 2 Replies
View Related
Jun 11, 2011
where I can download the Cisco VPN client?
View 4 Replies
View Related
Jan 11, 2013
I just re-installed my windows and when I installed the Hamachi client I noticed that I can not log in to my account, meaning on Hamachi there are only two options, on is "Create a new network..." and the other is "Join an existing network...", but I don't wanna joint to anybodies network, also I don't wanna create a new one,, I just wanna Enter to my previously created network, but How ?
View 4 Replies
View Related
May 26, 2010
I have been trying to mount a NFS shared to my Windows 7, but every time I try: mount \serverfolder *It says: Network path not found (error 53) I check the server and folder names and they are fine, so do you have an idea what can be causing this problem?
View 3 Replies
View Related
