Getting Configuration For Gigaraid IT8212F ITE?

Mar 2, 2011

when my computer starts booting this flashing message appear"wait for raid configuration" and Windows 7 opens after long time waiting.my computer is very slow now and i cant open any game .

View 9 Replies


ADVERTISEMENT

Drivers For (GigaRAID ITE8212 IDE RAID Controller)

Sep 24, 2009

Anyone managed to find Windows 7 compatiable drivers for "GigaRAID ITE8212 IDE RAID controller"?

I tried using the Vista drivers in compatibilty mode but no luck unfortunately. Issue being is that my 2nd internal hard drive is not showing up in My Computer however it is listed in device manager. This is the only item left in device manager that isnt installed properly :-(

I checked my motherboard drivers page @ GIGABYTE - Product - Motherboard - Specification - GA-8I955X Pro but they only have Vista drivers listed.

View 2 Replies View Related

"System Configuration Cannot Save The Original Boot Configuration For Later Restoration"

Nov 15, 2012

I'm having trouble with my very new computer (Lenovo Y480 with Windows 7 Home Premium 64 bit), which I've narrowed down to the following sequence:

1. I restored computer to original factory settings (to rule out possible causes)

2. I ran msconfig, and checked the boxes 'Safe Mode' and 'Networking.' I got the following error message:"System configuration cannot save the original boot configuration for later restoration. Boot changes will be reverted. The system cannot find the file specified"

3. The default boot option disappeared from the boot menu (Windows 7, default OS, current OS).

4. When I restarted my computer, it would not boot and gave me the error 0xc00034, stating that the file BootBCD was missing.

I did not do anything else with my computer after restoring the factory settings, and I did not connect to the internet. I originally encountered the problem when I wanted to try installing Windows updates in safe mode after some of the installations failed. I have replicated the error several times, including after successfully installing all Windows updates.

View 4 Replies View Related

F2 Configuration For Windows 7?

Oct 17, 2011

F2 configuration for window7?

View 1 Replies View Related

How To Reset IP Configuration

Oct 30, 2011

My Windows 7 tells me that " IP address has an invalid configuration" How can I reset it?

View 1 Replies View Related

64 Bit Windows 7 Configuration?

Feb 9, 2012

i want to install win7 64 bit, but um confused about my PC configuration i hav
intel Core i 3 3.06Ghz

Gigabite H55 mobo
2 gb Samsung ddr 3 ram
500 gb Samsung sata hdd
and liteon 24x dvd writer.

View 2 Replies View Related

Cd Rom Configuration For Windows 7

Sep 6, 2012

i have a hp pavilion all in one and my cd drive is not reading any of the discs that i put in. when i check the system it tells me thst the drive is running properly. what should i do?

View 3 Replies View Related

Best Configuration For SSDs And HHD

Dec 30, 2012

what is the best way to combine two SSDs and an HHD in a i5 system? P8Z77-v Deluxe, 16 GB 2100 Ram, i5 3.4, Seagate Barracuda 500GB, Windows 7 Ultimate. Want to buy either 2 Samsung 840 120 GB or 2 Samsung 840 240 GB.

View 14 Replies View Related

Virtual PC Configuration Fails?

Aug 26, 2011

I have a new Dell E6520 running Enterprise 64bit. I need the virtual XP to run some older software. Following the instructions, I successfully installed Windows XP modeNext step is to install Virtual PC. The installation of KB958559 appeared successful, but when I restarted the computer it got to about 95% and reported configuration failure.

View 12 Replies View Related

Windows 7 HDD And Partition Configuration?

Dec 6, 2011

I put the XP disk in to have a look at the partitions before deleting them, but found the partition screen was confusing. My query is as follows:

2)There are 2 HDDs in the PC. When I got the PC, it had one Seagate HDD - W7 appeared in Windows on the C: drive and I placed applications there. Immediately afterwards I added a 2nd Hitachi HDD to hold data only, creating a single volume on it called G: data drive. This all seemed to be working fine until this current problem.

3) So, I thought I would see a C: �system� partition, or maybe a 100MB �system reserve� C: and another lettered part of that partition, and the G: partition/volume for data files (on the second HDD). However, what I saw on the partition screen via the XP installation disk was this:

476938 MB Disk 0 at Id 0 on bus 0 on atapi [MBR] D: Partition1 (System Rese) [NTFS] 100 MB ( 75 MB free)
E: Partition2 [NTFS] 476838 MB ( 419213 MB free) 476938 MB Disk 0 at Id 0 on bus 0 on atapi [MBR] C: Partition1 (data drive) [NTFS] 476937 MB ( 383546 MB free)

4) In the CMOS Features screen in the BIOS setup, the HDDs were configured like this (extract):

IDE Channel 0 Master [None]
IDE Channel 0 Slave [None]
IDE Channel 1 Master [Hitachi HDP725050GLA]
IDE Channel 1 Slave [None]
IDE Channel 2 Master [None]
IDE Channel 3 Master [None]
IDE Channel 4 Master [ST3500413AS]
IDE Channel 4 Slave [None]
IDE Channel 5 Master [Optiarc DVD RW AD-72]

The Hitachi HDD at channel 1 is the 2nd HDD, added by me after delivery to hold data files only, so I expected to see it below the Seagate HDD on this list.

5) Also, the Hitachi HDD was top of the Hard Disk Priority list on the BIOS Advanced screen. Again I would have expected to see the Seagate above the Hitachi in that list.

View 6 Replies View Related

Can't Change BIOS Configuration

Nov 14, 2012

i got a toshiba satellite p775d and for some reason, the bios won't allow me to change any settings. it isn't asking for a password or anything like that, it just won't let me navigate to the appropriate parts of the bios gui in order to adjust the configuration. i tried flashing with the toshiba support utility, it won't permit it since the bios is the same version apparently. the bios manufacturer website utility won't permit a flash either, it only reprograms the blocks. do i have to take it into a professional?

View 4 Replies View Related

Wireless Zero Configuration On Windows 7?

Jan 25, 2011

In XP, if one is playing something over the network on a wireless connection, there are usually (always?) little dropouts every so often caused by Wireless Zero Configuration service. So once its connected, simply disabling the service causes those dropouts to go away and playback is smooth and steady.Well, in Windows 7 I have those same dropouts over wireless but, no Wireless Zero Configuration service to disable. So what is the equivalent or what needs to be done to make it quite checking the connection so that playback will be as smooth as it is with XP?I've tried disabling a couple of sevices that were associated to wireless (WLAN Autoconfig) but so far I've only managed to completely bonk the connection.

View 4 Replies View Related

Boot Configuration Error !

Jun 3, 2011

I was running Windows 7 on a Dell Vostro 3700 Laptop..After doing a spyware scan and finding and deleting all the entries I found, the next time I turned it on I get the error: oxc000000f "An error occured while attmepting to read the boot configuration data File: BootBCD"

I have looked online for solutions and tried using the Windows 7 disc (a copy) and also tried using 3 recovery disks, these all fail because it just stays completely black with a cursor (left for hours even) or I get a error message something around the lines of "insert correct boot media into the correct boot device" and I have no idea what this means. I cannot do a repair because I can only get the Windows disc to load if I remove the hard drive?? this is the only way I have got it past the green loading bar, so I am stuck and have no idea what to do..it only seems to respond to cds if the hard drive is removed?.. this all happened very suddenly and now I have a very expensive �800 paperweight

To add to this - I also tried the command prompt typing the bootrec.exe code that I found on the internet..selecting command prompt from the option when the Windows 7 disc was loaded, but basically it came up with an error of some sort and it had a drive letter of X:/ on the command prompt ?? ..Also to get to this the hard drive was removed because like I said I cannot get the discs working with it in.. I'm guessing this means the hard drive is screwed but there is clearly a problem with the boot sector and I have no idea on repairing it now.

View 7 Replies View Related

Forcing Initial Configuration To Run Again?

Apr 13, 2011

Remember when you installed Windows 7, there was that one setup thing that asked you for the time, your username, and password?

Ok so my friend wanted me to upgrade his HP laptop to Windows 7, since he originally had the you-know-is-junk version of windows (Vista).

I was able to install all of the software, but what I want to know is if there's a way to run that configuration setup thing again.

View 1 Replies View Related

Windows Configuration Stuck At 0%

Apr 27, 2011

I am having an issue with my windows configuration as usual when a Windows update comes along I click shut down and it updates and then once I power back on I get to the Welcome screen and it configures the new updates. Well right now I am having trouble because I run the update and then once I turn it back on the configuration stays at 0% and I have to power down and enter in Safe Mode so it reverts back to it's former updates. I don't want to have to go through this endless cycle forever is there anyway I can find out what these updates are? It is 4 of them and if I can find out what they are is there a way I can manually install each one individually to avoid this configuration freeze?

View 9 Replies View Related

Configuration User And Pw In Windows 7

Aug 16, 2012

I have some problem with my windows 7. In some time, before the windows showed a screen with username and password while it was logging in, a message about configuring windows appeared and failed in doing the configuration. I always solve this problem by restarting and entering the safe mode and so i can do restore windows to a previous point where it was working properly. It is however too bad to do that always. Every several days i have this. How should I solve this permanently?

View 3 Replies View Related

Boot Configuration Is Corrupt

Oct 21, 2009

Setup a test PC at work the other for Windows 7 32 Bit and Windows 7 64 Bit (dual boot). Set the dual boot up with EasyBCD. It was working fine until about 20 minutes ago.

I have tried the automatic startup repair but it does not fix the problem. I have also gone through Bootsect.exe and Bootrec.exe commands and they have succesfully written new MBR's and Bootsectors yet the PC still restarts. I have had to /force the previous commands to run.

I have also tried Chkdsk /r but for some reason it just runs through very quickly and finds no errors.

Any ideas as the PC's also have the virtual XP setup.

View 6 Replies View Related

5.1 Speakers Setting Up On Configuration

Feb 16, 2011

I am planning to buy a 5.1 speakers but this is my situation.I have my pc setupped to my 107cm LG TV via hdmi cable ..sound is comming from the tv (ofc) i was thinking now about those 5.1 speakers..but also will they work on my configuration?

View 1 Replies View Related

Usb Flash Drive Configuration?

Nov 2, 2012

Have a Sandisk 32 GB USB Flash Drive that I use for selective storage of certain files.If I purchase a Sandisk 64 GB to make a complete backup will I have to configure each one every time I swop usage.Why I ask this is that when I tried to introduce the new Sandisk to my laptop it could not be recognised as my computer was still configured to my old Verbatim 4 GB USB.

View 4 Replies View Related

<device Name> Does Not Have A Valid Ip Configuration?

Jan 17, 2012

My landlord recently updated his apple router and i am now unable to connect to the internet. The flow of internets is from the ATT high speed connection that goes from the modem, then to an apple router, and then plugs into his ethernet port which sends it to the ethernet port at my apartment.When I use the windows 7 networking utility it tells me that <device name> does not have a valid ip configuration.[CODE]

View 2 Replies View Related

Get Windows 7 To Not Use WZC As Configuration Utility?

Jun 10, 2012

I have Win 7 Ultimate. I recently bought a usb turbotenna to catch wifi. It worked fine with the Ralink software. Ralink worked in conjunction with wzc as I set it up that way while installing the software. After a few days, I had what I thought was trouble so I uninstalled the Ralink software. I then plugged in the usb adapter and let windows load it's own drivers. Few days after that, I reinstalled the Ralink software and opted to "Use wzc as configuration utility" instead of using Ralink's. Ever since then, while I can still see and log on to networks using windows, the Ralink utility now shows NO networks. It now shows, "NIC or driver not ready". After several uninstall/reinstall, Windows will not relinquish it's primary control. I want to go back to Ralink showing networks and letting me connect through it's site survey.

Would uninstalling the Broadcom wireless connection be the solution? How do I get it to once again be secondary?

View 1 Replies View Related

Wireless Zero Configuration On Windows 7?

Jul 1, 2012

I was wondering if there are anything like the Wireless Zero configuration on windows 7. The thing that scans for wireless networks constantly.

View 4 Replies View Related

Zero Configuration Not Prompting For Password

Jul 6, 2012

I have a computer that no matter what network i try to connect to (with a password), it never asks me to put in a password after clicking the connect button. I have several other laptops that work just fine and this happens at multiple locations so it's not an issue from the router.I have scanned for malware using MalwareBytes and Combofix which both came up with nothing besides adware, reinstalled the wireless network driver from Compaq/HP, and deleted all current profiles. Attempted to add the wireless network manually doesn't work either. After clicking the Add button, nothing happens or comes up on the screen.how to get the Windows Zero Configuration to work again?

View 1 Replies View Related

Computer Speed So Low According To Configuration

May 19, 2012

I have Core i7,500gb hard disk,4 gb ram and 1GB Nvidia Graphic card.Its speed is very low according to its configuration.

View 2 Replies View Related

Virtual PC Configuration Fails?

Aug 24, 2011

I've seen several posts on this subject, but can't get enough information out of them to solve my problem. I have a new Dell E6520 running Enterprise 64bit. I need the virtual XP to run some older software. Following the instructions, I successfully installed Windows XP mode. Next step is to install Virtual PC. The installation of KB958559 appeared successful, but when I restarted the computer it got to about 95% and reported configuration failure. It then reverted changes (I tried to follow previous postings and ended up on a page "How do I reset Windows Update components." There was a statement that this page didn't apply to my version of Windows and I should go to the Windows 7 solution center. I had gone there previously and didn't

View 4 Replies View Related

SATA Configuration For Windows 7?

Mar 8, 2011

I wanted to know whether Windows 7 Support the "ATA" option of the SATA Mode Configuration of BIOS

View 4 Replies View Related

How To Enable 5.1 Speakers Configuration

Mar 25, 2011

How to enable 5.1 speakers configuration

View 1 Replies View Related

Windows 7 Backup Configuration

Mar 27, 2011

i have 3 HDD

1. 80 GB of ssd drive (~55GB used) - drive C - oparation system windows 7 installed
2. 1000GB storage drive (649GB used) -Drive D
3. 1000GB backup drive (930GB free space)- Drive E

i wanted to use windows 7 bakup to to create disk image of drive C and save it to drive E/i got a massage that tels me that i dont have enough free space to make the backup, after i checked i found up that windows 7 backup although i checked only drive C also backing up the files from drive D.how do i make windows 7 to backup only drive C and not the files and folders of drive D?

View 4 Replies View Related

Shutting Down Configuration Message

Nov 9, 2009

on windows 7 shut down receive preparing to configure windows every time..

View 1 Replies View Related

Get Rid Of Auto-configuration IP Address?

Jun 3, 2011

How can you get rid of auto-configuration IP Address??

View 2 Replies View Related

Getting Desktop Configuration On Mobile?

Jun 27, 2011

procedure for accessing desktop configuration with the help of mobile phone?

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved