EMachine EL 1850 Hang On Start Windows 7 Ultimate
Jul 4, 2012
I have zero history of this box. I aquired it from a friend. eMachine EL 1850 Win 7 First power on, asks to start in repair or normal Starting with repair, hangs on Starting Windows screen. Screen does not full load, 'Starting Windows' is very light in the back ground. No colors over this text. Power off/Power on same message Starting with normal startup, it hangs at almost the exact spot, except 'Starting Windows' text is fully visible, and you can see two color dots from the rest of the logo starting to appear.
I've never seen a computer freeze at this point ever. So starts the battery of tests. Physically, the computer looks OK on the inside. No burn marks, etc. Delete key takes me to CMOS. Settings are correct. Attempt restarts with USB settings disabled yields same result as before. F8 takes me to start options. Every single option yields same result:
Safe Mode
Safe Mode w/Networking
Safe Mode w/Command Prompt
Debugging
Like eight different options, no success. Alt + F10 takes me to a screen with a command line (no prompt) and nothing else Will not boot from Windows 7 CD. All attempts to do so yield same results as above. Safe Mode stops loading after Classpnp.sys I am utterly stumped. We have tried everything we can think of and it all takes us to the same half loaded loading screen. We tried a DOS boot disk, but were unable to see it completely thro as the disk seemed to be made incorrectly.
View 9 Replies
ADVERTISEMENT
Aug 9, 2012
windows 7 hang at start screen. I removed all memory and put some old memory in did not work , unplued all usb did not work unpluged every thing from psu and put is all back did not work ,so this time when i started the comp it came upto start normal or start up repair i did repair first time it just restarted to the same screen so I did it agen and finaly it started repairing and started up. I did 3 restarts .so it seems ok for now. sorry it 12;22 am I did notice my comp was getting slower to start up for a few days untill it hung today on the starting windows screen.
View 2 Replies
View Related
Jan 16, 2013
I've searched around the internet but to no avail. Numerous Windows applications that come with the OS, such as Uninstall a Program, View Network Status, and so on will not start when I try to run them. For example, if I go into the Control Panel and select one of them, the Control Panel window freezes for a minute or two, nothing happens, and then it's back to normal again. The selected program does not start. I'm running a fresh install of Windows 7 Home Premium 64bit. The only new things I've installed are drivers for the hardware, and Skype, and Chrome. The hardware itself is presumably not causing the problem, and it's a nice system so it's not some sort of lack of processing power that's causing it. I've already tried reinstalling the entire operating system. The user account I'm on is an administrator account. Some applications such as Device Manager work just fine.
View 10 Replies
View Related
Jan 28, 2011
After i press any key to reboot from DVD, the windows is loading. But when it reach to the screen where we suppose to select language, currency & time format and keyboard layout, the screen become stuck. Mouse cursor doesn't appear and keyboard also not available to use.
View 6 Replies
View Related
Nov 25, 2012
My accer aspire notebook 5560 hang on start up again and again and again, and the other major problem is that, it does,t show the bios setting.when i press f2 for bios setting note book showsafe mode safe mode with networking . start window normally i have check all these options but the problem is still here
View 6 Replies
View Related
Jul 9, 2011
when I decided to start my computer today, everything seemed pretty normal. I had no problems at all with the Win 7 loading screen but after I typed the password, the "Welcome" loading screen came up. I waited and waited but tnothing happened, so I restarted it. It has been like that for a few hours now.
View 3 Replies
View Related
May 24, 2012
I have a Dell Inspiron 32 bit running Window 7 Ultimate. When I try to get help and support by hitting the help icon i get the message "Help and Support can't start". I went to the Microsoft Website and did what was in the knowledge base as far as starting and stopping service and doing the selective start but i am having the same problems.
View 5 Replies
View Related
Mar 20, 2011
I'm using Windows 7 Ultimate and yesterday I did my first image backup using Acronis True Image 2011 (I'd previously been using an earlier version with no problems.)
When the backup completed I told the computer to shut down and it went to a screen that said the following:
"Operations in progress. Please wait. The machine will be turned off automatically after the operations are complete."
The screen had a blue background with the blue ring with the white bit going round and round to the left of the text and the Windows 7 Ultimate logo at the bottom.
I left the computer and came back over an hour later and the computer had gone into standby. When I pressed the start button the same screen was still displaying so I left it for a couple more hours and came back to it and the same thing happened. I turned the computer off at the back and switched it on again this morning. I got the "Starting Windows" screen and then it went straight back to the "Operations in progress..." message.
View 5 Replies
View Related
Mar 20, 2011
I'm using Windows 7 Ultimate and yesterday I did my first image backup using Acronis True Image 2011 (I'd previously been using an earlier version with no problems.)
When the backup completed I told the computer to shut down and it went to a screen that said the following: "Operations in progress. Please wait. The machine will be turned off automatically after the operations are complete."
The screen had a blue background with the blue ring with the white bit going round and round to the left of the text and the Windows 7 Ultimate logo at the bottom.
I left the computer and came back over an hour later and the computer had gone into standby. When I pressed the start button the same screen was still displaying so I left it for a couple more hours and came back to it and the same thing happened. I turned the computer off at the back and switched it on again this morning. I got the "Starting Windows" screen and then it went straight back to the "Operations in progress..." message.
View 6 Replies
View Related
Apr 23, 2012
I formatted my hard disk (it has two partitions) and installed Windows 7 Ultimate on one of the partitions.Then when I tried to start Windows 7 Ultimate it said that I must repair the Windows installation.I tried to repair with Windows repair disk the start up but Windows 7 Ultimate won't boot again and says "bootmgr is missing".I tried again to repair with the command prompt,to rebuild with "BOOTREC/REBUILDBCD but it still won't boot.It boots only if I change the Bios and make my DVD as the first booting device and put my Windows 7 DVD on it.If I put other disks it won't boot.Can anyone tell me a way of how to boot without the Windows 7 DVD on the drive.
View 5 Replies
View Related
Sep 12, 2011
A family member of mine downloaded something that I'm assuming had malware on it [twas from an ad on the side of a website...chances are great]. When the computer was shut down and then turned back on..voila..Windows failed to start. I tried to do startup repair but it could not fix the issue. I cannot access the System Recovery options because there is a password apparently that NO one remembers putting on the desktop, so we can't access it. It went from being able to access startup repair..to the computer taking forever to boot to the "starting windows" screen just for another black screen to appear that says to insert something to boot from. [No, I didn't press F12 or anything to cause this to appear]. The computer seems to be getting worse. I've tried to even do a clean install of Win7, but now all of a sudden my drivers are missing and cannot be found. I've tried downloading them from this website: [URL]
View 14 Replies
View Related
Apr 22, 2011
Does anyone know how to start Windows 7 ultimate in safe mode
View 2 Replies
View Related
Jan 19, 2011
since one week my laptop del 830 is very slow during the very fisrt stage of booting, any one have some thing to say about this ?
View 2 Replies
View Related
Sep 27, 2011
if i can install windows 7 pro on an emachine eM350.?
View 1 Replies
View Related
Apr 1, 2011
I use windows 7 ultimate x86 and i had installed MSE on my desktop before 6 months it was working fine till today but suddenly today it is not showing in the taskbar near the right corner of screen,and whenever i try to double click its icon on desktop then it shows up for a second and then vanishes and dosent start at all.
View 3 Replies
View Related
Jun 12, 2011
Bought some pieces, assembled a new PC, installed Windows 7 Ultimate, then SP1, then several programs and everything seemed to be fine. But the next day, without changing anything, some programs won't start correctly, to be more precise: their processes seem to start (or at least they show up on Task Manager, but consuming only a few KB of ram and no CPU) but no program window appears whatsoever. Sometimes rebooting the PC will stop this from happening, but not always. Here I attach screenshots of CPU-Z and the customary files for debugging BSODs. Full system specs: [URL].
View 7 Replies
View Related
Jul 10, 2011
Can't download java on windows 7 on emachine laptop
View 2 Replies
View Related
Jan 6, 2012
Each time I turn on my laptop it shows a little blue screen then quickly changes to a black screen. The black screen states that windows was not shut down properly and to try one of the sfe modes and those do not work. I do not have any back-up or restoral disks, so what can I do.
View 4 Replies
View Related
May 10, 2012
I am running windows 7 ultimate x64 and have a quick question. I notice when my computer updates itself and goes for a restart, after the computer has rebooted all of the programs that were left open also restart. Is there a way to turn this feature off?Basically I'm looking for way to stop the opening of programs after a reboot, forced or not.
View 1 Replies
View Related
Jan 23, 2013
I have an emachine laptop, and it will not come on to go to windows 7, and it will not let me do the system boot or anything..
View 1 Replies
View Related
Jul 11, 2011
my emachine netbook will show the boot menu but wont go to windows 7 like its supposed to..
View 1 Replies
View Related
Sep 3, 2011
I want to make my e-machine into a gaming power house but I don't know how?
View 7 Replies
View Related
Sep 23, 2012
my emachine laptop has a black screen what could
View 4 Replies
View Related
Jan 11, 2013
I need a new Hard drive for my emachine
View 3 Replies
View Related
Jul 24, 2012
I recently have been getting blue shutdown screens on my laptop. I will give you plenty of information about my computer. I put all the information about the Blue screen dump files and my System Information file in an attachment. I hope this helps. I recently found out you could save the System Information file as a text and also as an .exe. This is how it happens, I will be using my computer and then the computer will become very slow and unresponsive. It is not completely unresponsive but it will be so slow that I cannot use it, then after about 3 minutes of this slow unresponsiveness the blue screen will show up and say driver power state failure and shutdown. I recently formatted the computer because it had been doing this before so I restored it back to factory defaults about one month ago.
View 8 Replies
View Related
Apr 20, 2011
i have lost my dvd drive completely i have no idea how, it says that the drivers are gone how can get them
View 2 Replies
View Related
Feb 1, 2012
Wireless switches for emachine wifi?
View 1 Replies
View Related
Oct 6, 2012
Recently I got malware on my computer and it has been reeking havoc! I got my ET1331g-05w from Walmart about 2 years ago, and it did not come with a boot disk out of the box (Had a chance to make one then but didn't...) I have backed up all my files and have been trying to do a Factory Reset but can't seem to get it to work. The Malware has made it so I cannot do a System Restore to an earlier date...
When I try to use the Emachine Recovery Management tools, the second I hit the "Completely Restore System to Factory Default" button I get a pop-up stating "Hard drive configuration is not set to the factory default. Restore aborted"...
When I try rebooting and hit Alt + F10 at the Manufacturers Logo it starts loading the System Recovery Tool, but stops and gives an error message stating "Napp_KM: napp7.exe error" and has error code: 0X 10054162 and prompts me to Abort...
I can't seem to find a boot-able Emachine Windows 7 downloadable disk anywhere. I should note the computer is for the most part fully functional but slower than snot, and video game and video playback has become very choppy if not usable at all!
I really don't want to go spend $100-$200 to get a new copy of Windows 7, I just want to get this dang thing reset to Factory Configuration.
View 3 Replies
View Related
Aug 29, 2011
it may not fix but i need a recovery disk for an e machine 627,need a free one because it may not fix the problem
View 1 Replies
View Related
Dec 29, 2012
smart failure predicted on hard disk 4 warning : imediately back-up your data and replace your hard disk drive. a failure may be imminent. press f1 to continue. what does this mean?
View 1 Replies
View Related
Dec 29, 2012
smart failure predicted on hard disk 4 warning : imediately back-up your data and replace your hard disk drive. a failure may be imminent.
View 1 Replies
View Related
