when I decided to start my computer today, everything seemed pretty normal. I had no problems at all with the Win 7 loading screen but after I typed the password, the "Welcome" loading screen came up. I waited and waited but tnothing happened, so I restarted it. It has been like that for a few hours now.
View 3 Replies
I have a Dell Inspiron 32 bit running Window 7 Ultimate. When I try to get help and support by hitting the help icon i get the message "Help and Support can't start". I went to the Microsoft Website and did what was in the knowledge base as far as starting and stopping service and doing the selective start but i am having the same problems.
View 5 Replies View RelatedI'm using Windows 7 Ultimate and yesterday I did my first image backup using Acronis True Image 2011 (I'd previously been using an earlier version with no problems.)
When the backup completed I told the computer to shut down and it went to a screen that said the following:
"Operations in progress. Please wait. The machine will be turned off automatically after the operations are complete."
The screen had a blue background with the blue ring with the white bit going round and round to the left of the text and the Windows 7 Ultimate logo at the bottom.
I left the computer and came back over an hour later and the computer had gone into standby. When I pressed the start button the same screen was still displaying so I left it for a couple more hours and came back to it and the same thing happened. I turned the computer off at the back and switched it on again this morning. I got the "Starting Windows" screen and then it went straight back to the "Operations in progress..." message.
I'm using Windows 7 Ultimate and yesterday I did my first image backup using Acronis True Image 2011 (I'd previously been using an earlier version with no problems.)
When the backup completed I told the computer to shut down and it went to a screen that said the following: "Operations in progress. Please wait. The machine will be turned off automatically after the operations are complete."
The screen had a blue background with the blue ring with the white bit going round and round to the left of the text and the Windows 7 Ultimate logo at the bottom.
I left the computer and came back over an hour later and the computer had gone into standby. When I pressed the start button the same screen was still displaying so I left it for a couple more hours and came back to it and the same thing happened. I turned the computer off at the back and switched it on again this morning. I got the "Starting Windows" screen and then it went straight back to the "Operations in progress..." message.
I formatted my hard disk (it has two partitions) and installed Windows 7 Ultimate on one of the partitions.Then when I tried to start Windows 7 Ultimate it said that I must repair the Windows installation.I tried to repair with Windows repair disk the start up but Windows 7 Ultimate won't boot again and says "bootmgr is missing".I tried again to repair with the command prompt,to rebuild with "BOOTREC/REBUILDBCD but it still won't boot.It boots only if I change the Bios and make my DVD as the first booting device and put my Windows 7 DVD on it.If I put other disks it won't boot.Can anyone tell me a way of how to boot without the Windows 7 DVD on the drive.
View 5 Replies View RelatedDoes anyone know how to start Windows 7 ultimate in safe mode
View 2 Replies View Relatedsince one week my laptop del 830 is very slow during the very fisrt stage of booting, any one have some thing to say about this ?
View 2 Replies View RelatedI use windows 7 ultimate x86 and i had installed MSE on my desktop before 6 months it was working fine till today but suddenly today it is not showing in the taskbar near the right corner of screen,and whenever i try to double click its icon on desktop then it shows up for a second and then vanishes and dosent start at all.
View 3 Replies View RelatedI have zero history of this box. I aquired it from a friend. eMachine EL 1850 Win 7 First power on, asks to start in repair or normal Starting with repair, hangs on Starting Windows screen. Screen does not full load, 'Starting Windows' is very light in the back ground. No colors over this text. Power off/Power on same message Starting with normal startup, it hangs at almost the exact spot, except 'Starting Windows' text is fully visible, and you can see two color dots from the rest of the logo starting to appear.
I've never seen a computer freeze at this point ever. So starts the battery of tests. Physically, the computer looks OK on the inside. No burn marks, etc. Delete key takes me to CMOS. Settings are correct. Attempt restarts with USB settings disabled yields same result as before. F8 takes me to start options. Every single option yields same result:
Safe Mode
Safe Mode w/Networking
Safe Mode w/Command Prompt
Debugging
Like eight different options, no success. Alt + F10 takes me to a screen with a command line (no prompt) and nothing else Will not boot from Windows 7 CD. All attempts to do so yield same results as above. Safe Mode stops loading after Classpnp.sys I am utterly stumped. We have tried everything we can think of and it all takes us to the same half loaded loading screen. We tried a DOS boot disk, but were unable to see it completely thro as the disk seemed to be made incorrectly.
Bought some pieces, assembled a new PC, installed Windows 7 Ultimate, then SP1, then several programs and everything seemed to be fine. But the next day, without changing anything, some programs won't start correctly, to be more precise: their processes seem to start (or at least they show up on Task Manager, but consuming only a few KB of ram and no CPU) but no program window appears whatsoever. Sometimes rebooting the PC will stop this from happening, but not always. Here I attach screenshots of CPU-Z and the customary files for debugging BSODs. Full system specs: [URL].
View 7 Replies View RelatedI am running windows 7 ultimate x64 and have a quick question. I notice when my computer updates itself and goes for a restart, after the computer has rebooted all of the programs that were left open also restart. Is there a way to turn this feature off?Basically I'm looking for way to stop the opening of programs after a reboot, forced or not.
View 1 Replies View RelatedCan I upgrade from Windows ultimate 32bit ver 6.1 ( build 7600) to windows 7 ultimate 64bit edition and keep all of my installed programs and files ?[meaning not having them moved to a new folder called windows.old]
View 3 Replies View RelatedI bought the full retail Win 7 Ultimate and trying to upgrade Windows Vista Ultimate to Win 7 Ultimate, both 32bit. I get to the Expanding Windows files to 21% and nothing. The program is still running and stuck at 21% but after waiting 3 hours I shut power off and Vista was reinstated. Why can't I get past 21% Expanding Windows files? I want to use the upgrade because I have a ton of programs on my Vista and don't want to spend days reinstalling them.
View 9 Replies View Relatedhow can i change my 32 bit win7 ultimate free dos to 64 bit win7 ultimate?can i do it without charge? where can i get it done?? can i get the iso/disk in downloadable format?
View 6 Replies View RelatedI have a video card that used to boot up in windows 7 - but know this computer with a GeForce 9500GT video card boots up with the Vista boot up logo.I found out this was the video card because I have another card with another GeForce video.I took the swapped the video cards, and the indication changed. The original computer booted with the windows start up screen. And the test computer booted up with the vista boot up screen.
I was told by a local computer repair facility this had something to do with video drivers.I tried what the organization suggested and uninstalled all video drivers (I used generic Windows 7 Video Drivers).Then the organization recommended downloading the latest video drivers for the GeForce 9500GT.This video card has 512GBytes of memory. I did this.Then I was told to install the newly downloaded video drivers.I resrted the computer with the Vista login screen with windows 7 operating system,and the vista login screen was displayed.
Last night I was on my computer and then I shut it down. Today when I came home from work it keeps saying windows failed to start. I tried hitting f8 and loading to the last good configuration doesn't work, safe mode same thing, repairing nothing, so my last resort was my windows 7 cd. So I went into bios and made my configuration boot from cd/dvd popped it in and restarted, a black screen came up saying windows is loading files, then the windows 7 menu came up, picked my language, next, and first I tried repair my computer, I get the little circle meaning its loading for like 5 seconds them it does nothing, rebooted again but this time I chose, install and I've been on the setup is starting for like 20 min. And forgot to mention, when it boots seem like it does good then comes to the screen where it says windows failed and gives me two options repair our start normal, if I pick repair it just reboots and start normal takes me to like the pick your user screen but its just blank no users, so I can't even restore our access the computer.
View 3 Replies View RelatedF keys will not work either! I don't think I have a disc to restore from, what else can I do?
View 4 Replies View RelatedMy dell n5030 laptop isnt getting past the windows start up screen. It boots up fine up to the part where the four balls become the windows logo, but then freezes there everytime. When i try to select the windows start up repair it blacks out the screen and I cant do anything.
I know its not a faulty hard drive because its newly fitted and this problem occured previously on a different hard drive aswell.
I've tried to upgrade from Vista Ultimate 32 bit to 7 Ultimate 32 bit numerous times now, all with the same result: a BSOD during the install process, which I get during (what I think is) the final step called "Transferring files, settings and programs."
The installation compatibility test warns me about my Nvidia drivers, which I've attempted to both remove and upgrade to the latest version, but that doesn't seem to make a difference (I still get the warning during the compatibility check, and I still get the blue screen). I'm not sure that's even the problem, either. I can't (easily) remove/replace the video card, since my mobo doesn't have onboard video, so I'd hopefully be able to avoid having to do that.
The error in the blue screen is a nebulous "REFERENCE_BY_POINTER" message. The technical information is "STOP: 0x00000018 (0x00000000, 0x86478030, 0x00000002, 0xFFFFFFFF)."
As a zip file, I've attached the setup log, error log, compatibility report, and what I think is the setup dump file, all of which I found in C:$WINDOWS.~BTSourcesPanther (I believe that's the right place to look). The logs complain about BthMig problems, which I think has something to do with bluetooth, but I don't have any bluetooth peripherals. I've uninstalled things that I thought might have some bluetooth things in it, like MS Intellitype (maybe a stretch), but again, no difference.
System specs: AMD Athlon 64 X2 6000+, on an Asus M2N SLI Deluxe, with 4 GB of ram, and an Nvidia GeForce 8800 GT. The hard drive I'm installing (upgrading) on has about 100 GB free.
I'm trying to upgrade a computer from Vista Ultimate (32 bit) to 7 Ultimate (32 bit) and I keep receiving this error message:
"This installation disc isn't compatible with your version of Windows. To upgrade, you need the correct installation disc. For more information, check your computer's system information. To install a new copy of Windows, restart (boot) your computer using the installation disc, and then select Custom (advanced)."
Now, I double-checked all the system requirements and the system is compatible with 7.
I have Windows Ultimate (x64).I use the Asus Suite II supplied with my Asus Asus P8Z68-V Pro Gen3 Motherboard (which I like for fan and temperature monitoring) Ai Suite II always loads BUT "on screen" it is messy during loading because a seemingly AI Suite bar sized white artefact appears top left of screen for 10- 20 seconds before disappearing when the AI suite icon appears in the notification tray. Sometimes a white square also appears temporarily.I have noted that if I exit Ai Suite II and reload via the Asus AI suite supplied Shortcut I never get these artefacts AND the suite loads instantaneously (I note however Asus uses AI Suite II.exe via the shortcut but via the Asus installed Task Schedule it open via "AsRoutineController.exe -open"I have also tried unloading AI Suite II and AsRoutineController.exe and loading AsRoutineController.exe and it too loads cleanly and almost instantaneously.
1) Why does Asus use the Task scheduler instead of loading via the normal Windows Startup procedures?
2) Could it be so each can be easily disabled if required) and is that the ONLY reason?
3) what is the -open switch in the command line?
4) Is there ANY good reason why I should not disable the AI Suite II in the Task Scheduler and add it the the Normal Windows Startup applications I use the Free version of Startup Delayer as it has served me wonderfully with my current Win 7 O/S (and my previous XP) in ensuring all desired Notification Tray Icons display EVERY time).
Today I PROVISIONALLY made the change and AI Suite II opens cleanly (as other Startup apps) without temporary white artefacts and with no noted side effects so far. I am nervous however, to make it permanent without advice from knowledgeable Seven Forums members on this subject
Today I began installing windows 7 ultimate on my laptop. However, I grabbed my ultimate N disk instead of my Ultimate disk. is there a way to upgrade to normal ultimate version. I have setup windows media center on every tv in my house and would like to have it on my laptop lol. I would realy rather not wipe and reinstall so i dont have to install all the drivers and anitvirus again...
View 3 Replies View RelatedSo ive been getting the black screen with movable cursor lately and have tried many a methods to remove it i tried checking in my event log for something, and this is waht it said "The following boot-start or system-start driver(s) failed to load:dtsoftbus01" So what does this mean and how can i fix this?
View 4 Replies View RelatedMonday couldn't boot up PC, had to go to system recovery and restore to previous day.
Log files show below that 4 things failed to load. Tuesday couldn't boot up PC again.. tried to restart like 4-5 times.. Finally comes up and in the logs there's numerous things that failed to load. Running a sfc /scannow right now.
I found corrupted system files, but it appears that the hard disk is fine. executed chkdsk and no bad sectors.Just looked into this on event viewer-The following boot-start or system-start driver(s) failed to load:xsoaynmfmfxpefxbozedltnzvijcvI am running Acer Aspire X3950-U3022 with Windows 7 Home Premium Home Edition.
View 4 Replies View RelatedI'm not sure where to even begin to fix these problems. Some online searches suggested doing a system repair but I want to get some more feedback here before proceeding.Here is the message from the event log:The following boot-start or system-start driver(s) failed to load:
AFD
cmdGuard
cmdHlp
CSC
DfsC
discache
ElbyCDIO
[code]...
I realized some of these are not Windows 7 related but most are. While the computer "works", I do experience frequent reboots and freezes. Perhaps some of these driver loading failures are part of the cause of my issues.
When i got home today didn't my computer work, my girlfriend has been the last one using it. So don't know how things were just before the shutdown or anything.when i turn on the computer i get to the screen where "touch bios" is and where i can see the options like Bios settings, boot menu, xpress recovery.but i cant press anything, and after about two seconds on that screen the PC shuts down again.The keyword lights up so there is a responds on it, but just doesn't work to press anything before it shuts down.I've got BSOD upto several times a day for a few months time.believe that my computer is affected by some virus or something is delaying my computer. might be an combination of several things.I got no external things hugged up to the stationeer computer right now.it is a windows 7 x64 machine.
usually when i get issues i can access advanced boot up or bios, but can neither in this case..I wonder if it might be a hardware issue.
When I start up my computer, my Steam starts up, then I manually start Chrome. Chrome comes up fine, Steam does too, but when I try to right click on Steam and click friends, all it does is create another steam process running at 100-108 K. Then if I close Chrome and try to reopen it, it will do the same. This happens with EVERY program after I start up. There's a 5 second window where I can open programs without issue, then after that it will only start 108 K copies of them. It takes me around 30 restarts just to get it working properly, if not more.
View 14 Replies View Related1. Which DLL uses W7/64 for the sound at start-up of Windows? I would like to edit it for my own sound.
2. How can I alter the sequence of the entries in the Start-menu? Now the sequence is in sequence of creation, I would like to group them by application-area.
I have an error that system32/hall.DLL is missing so I put in my windows 7 DVD ( I Have 4 DVDs for my windows, gateway, I always put the first one) so I could start start-up repair but when the windows files is loaded it keeps starting recovery mangment which gives me options to recover my hard drive to factory defaults (ie delete files on c and reinstall windows) ,why I don't get options to choose startup repair, how can I get it to start start-up repair?
View 3 Replies View RelatedMy laptop freezes when i turn it on after a minute or two just enough time to maybe sign in but i can go into safe mode and it wont freeze but you cant do anything in safe mode that
View 1 Replies View Related
