After downloading the latest updates for Google Earth, I began getting a msg saying that "there is not enough disk space on your backup disk." When I attempted to clean it up, I was unable to free up any space. I have a LENOVO 570; the backup disk is labeled: Lenovo: D It says I have @ 10.6MB free out of 29GB Can I delete all the drivers and the applications from the D drive ? And then do a complete restore once the D drive is emptied?
I made a backup image a couple of weeks ago using Paragon Backup & Recovery ,but since that time I have deleted about 80GB of files.
I don't want those files put back on my C drive if I need to do a restore from image.So I want to start fresh with a clean image and then do my scheduled differential back ups.
I can't remember how to wipe the info off the ext.Can't find an answer in the Paragon program.
I had windows 7 keep giving me a blue screen more often than not. I decided to reinstall windows. All went well and I don't get any blue screens. Now most of my 500g drive is 2 files (windows.old and windows.old.000). Now I don't have any room to backup my computer. These 2 files take up about 300g. I went to my local computer store and they this is normal for windows 7 and the files just keep getting bigger as time goes on. They advised me that I should have at least 2T drive to keep running windows 7. So my question is, can I delete the old backup files because I'm only using less than 200g on an ongoing bases. My operating system tells me that I don't have backup setup and I don't have room to set it up. I would have just over 300g free if I could delete these 2 files.
I have a 500 GB SimpleTech hard drive (outboard) that I recently discovered to be full. Upon exploring its contents, I discovered many backup files and have no idea how/why they were created. I deleted several of the older files to make room for files I wished to store, and then explored further. On the hard drive, I find one folder named HPLAPTOP01 and another named WindowsImageBackup, between them holding many GB worth of files with names: Backup Set yyyy-mm-dd xxxxxx. Is Win 7 creating these backups, or is the SimpleTech drive doing it?
The " Files to Delete" on disk cleanup are automatically recreated.? Because I check all and some dont appear anymore and other yes are still there but with 0 bytes.
i have files and folders in my external hard drive- transcend 320 GB. but now it is almost full with the documents. i want to delete some folders and file but it is not possible to delete. How to delete my documents in my transcend external hard drive?
I was reading yesterday that if I want to restore a file, I need to go to the file and right click and select restore. If the file does not exist anymore then one would go to the directory where the file originally was and select restore (or something to that effect). I have two disks and I want to save some important files from one disk to the other. I have always used Windows 7 Backup but now I am not sure I am doing the right thing. What would happen if my main disk crashed and there was absolutely no hope of salvaging it? Could I still restore from the back up made by Windows 7 Backup? I won't know the file names or directory structure if one disk goes down completely.
Any simple backup program that is capable of backing up large files incrementally by splitting the file and backing up only changed parts of the file? The files I'm talking about are files that get altered by appending stuff at the end of the file, e.g. log files or mailbox files, so it's generally possible to split a new version of the file at the exact point where the old version stopped, purely by file size.
Specifically, I want to back up Thunderbird and SeaMonkey mailboxes without having to create additional subfolders within those programs. I understand that if something had changed near the beginning of the file, then the whole file will have to be backed up, unless the backup program is capable of some very clever searching, but mostly the files will change only by having data appended to it.
The other day I did a WindowsImageBackup,put it on the (I) drive. Right after the back up my desktop icons wont stay in place, never had that problem before. Can I just right click on the backup and delete the folder,or is there a way to do this that is safe.I dont want to run into any problems,just want to see if the icons get back to where I put them.
I been backup my system to second internal hard drive E. But the system image file take almost 160 gb that take up too much space. So I want to change to backup my system to an external hard drive. Now even I did delete all backup files in E: drive. But looks like that 160 gb system image still in my E: drive. Because when I check my E: drive properties I still missing 160 gb space so I think that system image still in there somewhere. How can I completely delete that system image to free up that 160 gb space on my hard drive.
how to delete only intermediate system backup images of windows own backup facility? I want to keep the first and the last images and delete all images between them.
I have a system image on my external HDD made by Windows 7 Backup & Restore utility on my old computer. Now I am using a new machine and would like to delete my old system's system image but do not know how to properly do so.
Since I have not ran a backup yet on my new machine, there is not option for "manage space" in the backup & restore utility
I have 64 bit windows 7. I deleted dungeon siege 2 using the control panel, remove program. It was removed except for one file in Program files x86/microsoftgames/dungeonSiege2. I tried manually deleting it but get this "the action can't be completed because the folder or file in it is open in another program. Close folder or file or retry" There is nothing open. I clicked properties of the file and security and clicked administrator and get the same message. Never had this problem removing remnants of programs in xp.
I was doing a backup of my computer and it did not completely do it, so I have to do it again but the computer is advising I do not have the authorisation to delete the information.
To improve the reliability of my system, I bought an identical second hard drive, which Windows 7 recognized. I then used a CD-based cloning program to clone the second drive to be identical to the first. If I disconnect the first drive, I can successfully boot from the second drive. With both drives connected, I can boot from the first and the BIOS recognizes both drives, but Windows does not see the second drive. Can I fix this so that Windows recognizes both drives?I plan to run the cloning program once a week. Is there a better way? My computer has RAID available, but the backup disk is not bootable.
I made a backup disk of different files and now certain Word documents on the disk and when loaded back onto the laptop show with the file extention .LNK and have a type as Shortcut. The laptop had to be wiped clean hence the need to use the backup.
My 160 GB Win7 drive on my laptop failed (single partition), buckup that I created on a 750 GB drive using EASUS Partition Master COPY. The backup drive is FULLY BOOTABLE, I've been booting into Windows 7 from an eSata external interface with no issues. It has a partition with my backed up Win7 installation and the rest is just unallocated spaceMy problem is restoring the backup to my new 160 GB drive. I've tried every which way to copy the partition over but it's never bootable - when I try to repair from the Windows CD using the GUI or command line tools it never works out
Has anyone tried to burn a System Image (with Windows Backup and Restore) onto a BD-R disk?I have 52.5 GB used on my C drive (Windows 7 x64). I have a clean install, with windows updates, and it would be phenomenal if I could use my WH12LS30 (LG) internal blu-ray burner for the System Image creation, since I only have 1 harddrive.When I try a BD-R (and this is my 1st try at System Image burn) , I see "The media needs to be formatted before it can be used...". Just didn't sound right to procede.
So I want to perform a disk clean up on my laptop, except I have no idea which items in the list are safe to delete and which are not. I've looked through Google and a lot of sites say it's safe to just delete everything, but I want to make sure.
The following:
Downloaded Program Files - 0 bytes Temporary Internet Files - 0 bytes Game Statistics Files - 3.71 KB Recycling Bin - 0 bytes Service Pack Backup Files - 920 MB System error memory dump files - 5.00 MB
I bought a computer on craigslist a while back and it's been working great and all but lately it started slowing down really badly. I play WoW and Skyrim mostly. I used to be able to play at 60 fps or so now I can drop from 30-15 fps. I considered doing a system restore but there weren't any restore points because there weren't any being created every week or so for some reason. So really the only option I have now is to completely restore my computer to it's original settings. When I first bought the computer the guy who sold it to me told me that he'd wiped the hard drives clean and that's what I'm trying to do right now but he never gave me a back up disk or a disk for the OS which is what I'm really worried about. He had windows 7 ultimate installed. I'm afraid that if I try to do a factory reset that I won't have an OS to reinstall onto my computer.
These are my specs if they matter any.
Operating System-MS Windows 7 Ultimate 32-bit SP1 <span>CPU-Intel Core 2 Duo E7500 @ 2.93GHz Wolfdale 45nm Technology <span>RAM-4.00 GB Dual-Channel DDR2 @ 333MHz (5-5-5-15) <span>Motherboard-ASUSTeK Computer INC. Maximus II Formula (LGA 775) <span>Graphics-W2061 (1600x900@60Hz)1024MB GeForce 9800 GT (BFG Tech) Hard Drives-156GB Seagate ST3160023AS ATA Device (SATA) <span>488GB Seagate ST3500820AS ATA Device (SATA)
I manage a large array of disks and rely on Robocopy via batch files to backup only changed data. This has served me well for a year or so now. However, last week I had a drive go flakey. For some reason all of the folders on the drive beginning with letters K through Z got trashed. Since no one realized this the backup script ran on schedule and promptly deleted all folders on my backup drive beginning with letters K through Z.
I've used a couple of backup programs in the past and I'm fairly sure this issue is not adressed.
drives partially failed and deleted all folders beginning with letters K through Z. When my backup script ran it deleted all of the same folders on the backup drive. I received a reply from a user (don't have access to the name right now) who suggested a freeware sync package which most likely would work. However, company policy states that no freeware is to be run on our systems. While I could probably get away with it a question comes to mind - Why isn't this a standard feature in commercially available backup software. There must be a name for this type of option. Does anyone know of a commercially available package and / or what this feature might be called? I can't be the only person who has run into this problem.
anyone got an idea on why i keep getting the error message not enough disk space for back up image
when there is more then enough on 3 different drives but i still get the same message. i have 2x 64 bit Windows 7 installs and 1 x 86 Windows 7 all 3 give same error message when i try to create an image.
When I try to back up and restore (my files) it does not complete. I get the message disk full. I tried to uncheck the (shut off and delte all files from system restore) but that does not help. When I check the amount of space available on the D drive, it shows as full, but system restore seems to work; any suggestions?
There raises a flag that I have to make a Backup. I thought and read this is a well worked out function in Windows 7, let's try !
But as you expect and the reason why I'm here, there is a difficulty.
The function wants to backup 2 hard drives (C: and H:) and I can't uncheck H:. C: is my windows disk and H: is my disk where I keep movies and stuff . I don't want to backup H: . I only want to back up C:!
What I read on several places is that Windows 7 Automatically selects the drivers which contains System files (in the back up function he calls H: a system disk). In Disk Management it also says Disk H: System/Active/Primary Partition.
I am for sure I installed Windows 7 on C:. I didn't do anything on H:.
Also an other thing I found out is that MSE uses the biggest drive for downloading updates and installing the updates (use it as source). But I don't know if that is the reason it is called a system disk.
I want to make my backup this way, how can I only make a backup of C:
I took the 500GB disk from my dead notebook and decided to keep old data within it as an external storage in a USB case. The drive was bootable as Windows 7 pro x64, but now I want to remove all system folders from it, keeping all backups and private data untouched, but I need special rights for most of the folders/files inside Windows folder: it requests for TrustedInstaller privileges. I'm using a Windows 7 enterprise 32bit, logged in as a AD domain user that is also on local Administrators group. I tried taking ownership, but it failed.