I started a chkdsk on a Windows 7 64bit computer that got stuck at startup repair. Before that though, I was looking around, the damage seems to be the windows files got messed up after an update. My computer data was intact when I looked around booted through a recovery cd and I checked again via a ubuntu live cd. My question is that the chkdsk d: /f apparently stopped in the middle and gave the following message:An unspecified error occurred <6672732e637878>Failed to transfer logged messages to the event log with status 50What does that mean? Is it terrible? I just restarted the chkdsk anyway and as of now, it is finding less unreadable segments, but is there a risk of data loss?
I have an unspecified error 766f6c756d652e63 3f1 (yes there is a gap before the 3f1). I have tried but the above error occurs. HDD is C: drive NTFS system. Reason I'm worried is that sfc /scanow returned nothing, but windows backup returned quite a few lines similar to the following....
- Windows Backup skipped C:UsersxxxxxDocuments because is it on corrupted drive C:. - Windows Backup skipped c:UsersPublicvideos because is it on corrupted drive C:. - Windows Backup skipped c:UsersxxxxxAppDataLocalLow because is it on corrupted drive C:.
i am trying to create a restore point in my system but everytime i am getting this message: Error message was: "System Restore" did not complete successfully. Your computer's system files and settings were not changed."Details: An unspecified error occurred during System Restore (0xc0000022)." i've even run System File Checker [SFC] and scan it but it shows that there is no integrity error. but after that while creating a restore point same error message was there. so,how should i create a restore point?
I am currently on Windows Vista Home Premium 32 bit and I have bought and downloaded Windows 7 Pro 64 bit.
I have used the upgrade adviser and it says: Information about upgrading to 64-bit Windows 7
System Details
Custom installation required You'll need to perform a custom installation of 64-bit Windows 7 and then reinstall your programs. Make sure to back up your files before you begin.
Go online to get important information about custom installation
Windows Mail and Parental Controls (Web Filtering) These features are no longer included in Windows 7. You can get similar programs for Windows 7 from other software manufacturers.
Go to the Microsoft website to learn more
More info from Dell Inc. Dell Inc. has a website that might give you more information about getting Windows 7 running on your PC.
Visit the Dell Inc. website
Windows Aero support Your graphics adapter supports the Windows Aero user interface.
Go online to learn more about Windows Aero
CPU speed: 2.7 GHz Your CPU meets the 1 GHz minimum requirement.
3.3 GB of RAM Your PC meets the 2 GB minimum requirement.
149.8 GB free space available on C: Your hard disk meets the minimum requirement of 20 GB free space for 64-bit Windows 7.
Now wants I start installing it fills up the green bar and then when there's just a bit left to go I get the error message:
"an unspecified error occurred during system restore (0x8000ffff)"I made a restore disk on my 64bit Windows 7 desktop for my 64bit Windows 7 laptop because windows stopped loading. Now when I try different restore points I get the same problem. Should I make a new disk? What else could I try?
Quote: I have a normal stock dell desktop with windows 7. I borrowed my grandmothers laptop. It is an Acer Aspire 5736Z-4790 w/ an Intel Processor. Last night after trying to install some files to make some cheat programs I use for an online game (I have loaded same programs 10x on other computers so I doubt its related to the programs themselves) One thing I did do was try to delete a winhttp.dll file in system32 or the WOW one(for 64bit computers? Forget the folders name)and replace it with another one(Directions for the cheats said to make sure that winhttp.dll was in sys32) and while trying to do that windows would not let me so I read somewere that there is a program that lets you "take ownership of a file" so you can override permissions. I then took ownership of sys32 and maybe the 64bit folder as well. It still did not let me replace any files in sys32 so I then restarted and when windows opened again, desktop loaded then an error message came up, then it restarted itself, and repeated, but after the second time it restarted itself windows would not load. After the Acer manufacture screen, just the blank black screen with the blinking line.I have tried everything, cant seem to figure out how to even get it to open in safe mode. Only thing I can think of would be to use the restore disk which I dont have. Is there a way to legally make a restore disk on another PC to be used on the broken laptop?
"an unspecified error occurred during system restore (0x8000ffff)"I made a restore disk on my 64bit win7 desktop for my 64bit win7 laptop because windows stopped loading. Now when I try different restore points I get the same problem. Should I make a new disk? What else could I try?I have a normal stock dell desktop with windows 7 borrowed my grandmothers laptop. It is an Acer Aspire 5736Z-4790 w/ anIntel Processor. Last night after trying to install some files to make some cheat programs I use for an online game (I have loaded same programs 10x on other computers so I doubt its related to the programs themselves) One thing I did do was try to delete a winhttp.dll file in system32 or the WOW one(for 64bit computersorget the folders name)and replace it with another one(Directions for the cheats said to make sure that winhttp.dll was in sys32) and while trying to do that windows would not let me so I read somewere that there is a program that lets you "take ownership of a file" so you can override permissions. I then took ownership of sys32 and maybe the 64bit folder as well. It still did not let me replace any files in sys32 so I then restarted and when windows opened again, desktop loaded then an error message came up, then it restarted itself, and repeated, but after the second time it restarted itself windows would not load. After the Acer anufacture screen, just the blank black screen with the blinking line.
I downloaded the .exe for 7 Home Premium from the UK Ultimate Steal site. It says it's preparing setup1.box, but eventually it gives me an error message saying "Unspecified Error".
The .iso is equally annoying, I burned it to a DVD and tried to get my laptop to boot from the DVD drive. It waited a moment and then booted from the hard drive. I burned to a different DVD and attempted to boot from DVD drive, it did the same. I then tried to boot a DVD containing Ubuntu. This booted perfectly fine.
Running Win 7 Home with all latest updates. Why can't I access all Windows 7 functions in normal way, yet I can access them directly by a workaround? I recently found that I could not access the administrator functions for computer management on my home computer. For instance, when right clicking on the main "Computer" icon on my desktop and selecting "Manage" I would get an unspecified error. Going in through control panel I could not access many system admin tools and when I try I get error of you may not "have the appropriate permissions" This applies to "Services" "Component Services" "Computer Management".
Workaround: Today I found that I can open the administrative tool folder in Explorer directly and then right click on one of the management functions and select "Run as Administrator." Then it let's me in OK and I can control things. It's only the usual ways of accessing these controls that I can not now do. This is my personal computer and I'm logged on as administrator, the only account on the system, AND it is telling me I can't access all the files on my own computer's hard drive that you normally use to manage win 7. It's not networked files I'm trying to use but my own Win 7 computer's hard drive, e.g. I get the error when I click on own Desktop Computer Icon and select "Manage."
I keep getting Error code: 0x80070035 The network path was not found error whenever I try to connect to any other computer (running windows 7 ultimate) on my network. I have another computer with windows 7 ultimate that does not have this problem. Firewalls are disabled on all computers. Computers all ping fine. Can ping by name too. If I try to connect via IP address, I get Error Code: Error0x80004005 Unspecified error.
when i click format a 150 gb partition space in disk management option i recieved the following message "An unexpected error has occurred. Check the System Event Log for more information on the error. Close the Disk Management console, then restart Disk Management or restart the computer". and the drive does not appear like other drives in MY Computer?
I have already reported to Sony to but i heard their take their time but thats the one thing what i dont have at the moment so i know many people here know about that stuff to. So anyway. Some time ago SP1 launched for Windows 7. I installed but it but something went it wrong and it didn't install correcly and then i was forced to use System restore. Everything worked and i haven't used SP1 because i don't want to risk screwing up my computer before some important things, i got plenty of time later for that . The problem is after the system restore every time Vegas launches i get a error : Sony Vegas pro 10 an error occurred starting Vegas Pro Error 0x80070002 (message missing).
i have a toshibio satelite model # psc16c02q00m, I've tried to reformat my computer, i have the back up Disk and when i started my computer i press F12 to get the boot bios where i made it boot from disk putting my back up cd#1 into there. it was working fine till i put in disk three, from there i got a F3-F200-002 Error said an error has occurred please press OK to turn off the computer. and that is the only option. ive tried repeating the process but now all i get to is this screen even when i try to but off the hard drive im assuming my windows has been cleaned.
I recently re-installed windows and am now trying to install the DirectX End-User Runtimes (June 2010). All goes well, it installs everything, but as it finished I get this error: I have tried redownloading, using other installers and updating my graphics drivers. Nothing will work. It's probably worth mentioning that the first time I tried installing, about a week ago, my computer totally froze in the middle of the install and I had to force restart.
I recently switched out an older Netgear router for the Netgear WNDR3300. I have a 1TB WD MyBookWorld connected via ethernet to the router. Ever since the router switch I have been having two specifice issues:While uploading videos to Facebook, the video will upload anywhere from several MB up to over 100 MB, then stall, saying it's still uploading but trust me, it isn't. I can copy files/folders from the networked hard drive to my computer flawlessly, but when I try to copy files/folders from my computer to the networked hard drive, it copies anywhere from a few seconds to maybe a couple minutes then stalls out, giving the error message: "Network Error. There was a problem accessing [\SERVERFOLDER]... Make sure you are connected to the network and try again." with Retry, Skip and Cancel. When cancel is pressed it gives: "An unexpected error is keeping you from copying the file. If you continue to receive this error, you can use the error code to search for help with this problem. Error 0x8007003B: An unexpected network error occurred.
Other useful information: on the new router, the WNDR3300, if I use WEP security, I can copy files/folders to the hard drive, no problem. However if I try to use WPA/WPA2, the abovementioned problems occur. I would use WEP and just forget the hassle, but WPA2 is much faster and more secure, so I really want to get this fixed.I also believe the two problems are somehow related, considering they both involve working for a few seconds to a few minutes, then stalling and failing. Could this be somekind of authentication or something to do with WPA/WPA2 that I'm doing wrong?
I have tried to install Windows 7 SP1 64 bit and it gave an error message of: windows update encountered an unknown error code 80246007. I also get the error message after my laptop restarts if the installation shows it supposedly installed: installation not successful an uknown error has occured Error 0x8008095. I have also tried the 3 steps to try before installing Windows 7 SP1 and I still get the above errors.I would like to know the following:
1. When we update Windows where does it store the updates. Because I noticed that each time I update I loose disk space and I am wondering if I could delete these updates once I know they work.
2. I noticed a folder in the color of purple. It is: c:userusernameApp Datalocalmigwiz in this folder it contains the following files: debug.txt, diagerrr.xml, diagwrn.xml, miglog.xml, setupact.txt, setuper.txt what is the folder for.
3.I use windows disk cleanup and ccleaner. I noticed that when you install or uninstall programs it creates a restore point and shadow copies. I clean them out once a month. Is there anywhere else that shadow copies are created and can be deleted. How about does Windows 7 has a cache where we need to delete files. How many temp folders does windows 7 create. I would like to retain some disk space back. Do you know if Office 2010 where it stores it updates and can we delete them once we know they work.
I'm working on a client's laptop, compaq Presario CQ57, 2gb ram 250 GB HDD.
I installed a new harddrive and installed a new copy of Win 7 Home Premuim x64 After it reboots, it just hangs in the welcome screen with the Windows logo.
I reboot via Windows 7 repair disc and run C: chkdsk /r and I get this message "disc check error 766f6c756d652e63 3f1"
Everyone when i press personalize when i right click on the desktop it will show explorer.exe unspecified error.. and in control panel/appearance and personalization the icon "Themes" is gone.
I'm trying to install windows 7 onto my HP 6710b laptop. But keep getting same error come up. (this also happens with 2 older hp laptops I have!) From start of boot with disc I get the following... Windows has encountered a problem communicating with a device connected to your computer. This error can be caused by unplugging a removable storage device such as an external USB drive while the device is in use, or by faulty hardware such as a hard drive or CD-ROM drive that is failing. Make sure any removable storage is properly connected and then restart your computer. If you continue to receive this error message, contact the hardware manufacturer.
Status: 0xc00000e9 Info: An unexpected I/O error has occurred.
I upgraded from Vista to Win 7 using the HP upgrade disk. About every 2 weeks chkdsk will start at startup. The countdown won't stop and I can't skip it by pressing any key. When it counts down to 1 it freezes and I had to press the power button to restart. Then when it restarts the problem reoccurs.
In the past if I press F8 and choose last known good configuration, the system will normally boot. And then I'll schedule a disk check next time I start the computer and this will normally fix the problem. There won't be any check disk error in 2 weeks.
But this time no matter what I do I can't get it fixed. sfc /scannow didn't find any errors. I ran the system repair by pressing F8 at startup and it said it fixed the startup problems. But the disk check I scheduled at startup still won't run properly. It shows up and then disappears without actually doing anything.
I'm using Avira now but the problem was there when I was using Avast. I don't know what might be causing the problem.
I'm using a fairly new laptop, had it for less then a yr. It came w/ Vista and I never had to use Chkdsk on it. I used the Windows 7 upgrade disc about 3 weeks and upgraded to Windows 7 w/ no issues. Love it so far.Today my computer froze while shutting down. I had to hold the power button to turn it off. I then wanted to chkdsk, but it will not run suppostedly because "due to recent software installation" and it gives me error 766f6c756d652e63 3f1.
Every time i boot my computer i receive this message, after several restarts my system will load up the windows, n i can use my PC,,, n if i turn on the Pc after some hours same error message again.. have restart my system several times to get it work... What's the problem here... i think it's not hardware problem if it was it wouldn't have booted up my OS after several restarts... Is this something gotta do with registry, after messing with registry i have started to get this message, Is re-installing my Operating System only the solutions.
I downloaded an ATI Graphics driver from the sony website then when I launched the installer, it says: "checking system information.." then after that something will pop up saying "an I/o error occurred while installing a file. This is normally caused by a bad installation media or a corrupt installation file." What's wrong with this? I used internet download manager to download the file, although while I was downloading it, there was a blackout but when the electricity came back I quickly resumed downloading it.
So, about 2 weeks or so ago my PC was working perfect, no issues whatsoever. Then about 2 - 3 days after I went on my PC and things just froze up, I couldn't shut down properly because it was just stuck froze. So I shut down using the button, but when I turned it back on I got "Disk Read Error Occurred". So I left my PC off for a while and it worked again after a few restarts, but it seems to keep coming back, my PC also sometimes freezes up.
I tried to make a small 7gb partition on a separate drive and it worked fine. I had already had this drive which is a 1tb drive partitioned as follows: 500bg and 500gb. So I booted using my xp disk and it part. and when it restarted I got the following: "a disk read error occurred. Press Ctrl+Alt+Del to restart".
Now I can't install xp because it won't find the 7gb partition on restart and I no longer can boot into Windows 7. I tried running Windows 7 startup repair but it says:
"startup repair cannot repair this computer automatically."
The first line of the problem signature is StartupRepairOffline.
I was trying to boot windows 7 from DVD. but while installing I tried to delete my one partition to repartition it with larger size.but when I deleted that, my other two logical partition got deleted showing unpartition disk. No idea on how did this occur..I tried to create partition using XP DVD. but after copying the windows while it took restart, it showed the disk o boot error problem and I tried to boot again with Windows 7 DVD. but no help. everytime its showing the disk error message..
I'm trying to reformat my PC with windows 7 and i've made a boo-table USB which contains windows 7 on it.When I try to boot up from it it says A Disk Read Error Occured. It is not the USB sick itself as I've tried it on my laptop and it was able to boot from it.My BIOS setting indicate to boot from USB first.
Wanna start off by saying sorry if someone has already resolved this problem on another thread but I have read many and haven't found a problem that exactly matches mine.Ok here goes, I have a Dell Inspiron 1764 running on Windows 7 64 bit. I've had problems with this pc for months in that it suddenly lost masses of disk space and because of this I couldn't update any programs or even renew my McAfee which I gAfter some investigative work with help online I found that my 'My Music' and 'My Pictures' folders were located on the C drive and taking up a lot of space so I relocated these onto the D drive. This seemed to solve the problem, the C drive was clearer and everything was working fine, security checked for viruses and all seemed to be in order.
That lasted for about 4 days and then yesterday the laptop randomly crashed and then restarted and it appeared to be ok, I continued using with no problems and switched off as normal. I tried to boot on again last night only for it to hang on the Starting Windows screen, didn't even reach log in. It went to a black screen and then something else came up and asked if I wanted to Start Normally or in Safe Mode, I chose Safe Mode.Nothing happened for a while and then it went into CHKDSK but sat at 3% for about 2 hours saying loads of files were unreadable, it finally got to 30% after 6 hours but by then it was 1 in the morning I had to manually turn the pc off.I tried again this morning and had the same error but it automatically goes into CHKDSK, after about 5hrs it got to 55% and then went back to the Starting Windows screen, black screen and the CHKDSK again, this has happened 3 times now.
I've tried pressing F8 & F12 when first booting up and I've also inserted the Windows Installation Disk but this won't run. I gave up and switched off again, went through the same process but when it got to CHKDSK I pressed to cancel the check but it just sat there for 25mins and then asked me to choose Safe Mode etc, I choose SM again and it started to load files and has been sat at Loading Windows Files for the last 15 mins.
