I'm trying to attach a sound file to a photo so I can play it on my digital picture frame. I am also trying to make it so when I click on the photo file it will automatically trigger the sound file to play.
In the past when I wanted to attach a photo to an email I would browse the desktop for the folder that I wanted. Now for some reason I cannot access the desktop. When I browse I get the download folder. On the area on the left of the download folder specifies document, drives and my external drive. How can I correct this?
Beginning about a week ago I cannot attach ANY files to my email (yahoo) because when I click on "attach file" the little box opens as usual, but when I click on "desktop" so I can access the file from it, nothing at all happens. It will not open for me to get to the file I have.
I have a usb card reader plugged in with a 4GB card. The transfer rate starts in the MBps and then dramatically slows down to KBps. I included both screenshots below.
My boss has an Epson P-7000 digital photo viewer. The other day, after he had taken the pictures off of it, he formatted it. I guess he thought that he was formatting the SD card, but he ended up formatting the unit instead. Now, when you turn it on, you get an error message that says "Invalid File System, please power off the device".I figured that the best way to fix this was to update the firmware. However, it won't let me get that far.
Yesterday I went to click on my photo file which has all my photos from as far back as 2006 and I clicked the mouse button fast and the file was gone. I hope I can recover it. It's all of my family photos. The file is on an external hard drive and not my computer.
I just reformatted my C: partition running windows 7.All my data is on the D: partition.I took ownership of all the files in D: Their is one folder I still don't have permission to open the files inside which are graphics for a website I am creating..The error message I get is "Windows photo viewer can't open this picture because you don't have the correct permissions to access this file location".so I ran the command prompt as administrator located the folder in question are ran "takeown /R /D Y /F *"It has given me full control of the files and made me the owner but still the error message comes up.
Is there any photo editing software comparable to the old Adobe PhotoDeluxe. I have tried Gimp, Picasso and paid for other versions of Adobe. None are as user friendly and have the editing tools that PhotoDeluxe had.
Explorer won't update thumbnails after I alter a photo, for example by rotating sideways photos (that is, permanently rotating, using a photo editor program), or by cropping.
How do I get the thumbnails to update?
This is happening for all photos (not just certain ones).
I have tried:
- View > Refresh
- Copying the photos to a new folder and renaming them. Even if a photo has been drastically cropped, the thumbnail is still showing the original, whole one - that is, it's showing parts of the file that DON'T EVEN EXIST
- Entirely disabling the thumbnail cache: Group Policy Editor > 'Turn off caching of thumbnails in hidden thumbs.db files'. This *must* force Windows to redraw the thumbnail - but it doesn't!
- Restarting computer after each of the above steps
Win 7 Pro, 64 bit. Photos are jpegs from a new digital camera.
my win 7 photo viewer does the weirdest thing!! when i view my photos and rotate them and close the viewer, they disappear from my folder where they were originally stored in. i've checked my deleted items. no luck. searched whole pc for edited files and names of files that disappeared. no luck there either. i tested it on my hubby's pc. exact same result there.
I have Windows 7 Professional installed on my 13" Macbook pro, I went to attach a VHD, but the option was greyed out, it won't let me create one either?
System Info Utility version 1.0.0.1 OS Version: Microsoft Windows 7 Professional , 32 bit Processor: Intel(R) Core(TM) i5-2415M CPU @ 2.30GHz, x64 Family 6 Model 42 Stepping 7 Processor Count: 4 RAM: 2217 Mb Graphics Card: Intel(R) HD Graphics Family, 916 Mb Hard Drives: C: Total - 89847 MB, Free - 46839 MB; E: Total - 200137 MB, Free - 183100 MB; Motherboard: Apple Inc., Mac-94245B3640C91C81, MacBookPro8,1, C02129400KHDRKQA7 Antivirus: avast! Antivirus, Updated and Enabled
I have an NEC Superscript 870 that does not have Windows 7 drivers. Is it at all possible to run a printer in WXP compatibility mode as we can run programs in WXP compatibility mode??? Sure would not only save a few (very dear) dollars, but also prevent idiotic waste of a perfectly good asset (where is all of their "think green" money where their mouths are???). I am intentionally not upgrading one computer to Windows 7 just so I can copy docs over to the WXP computer and bring them up on it so I can print them.
I know, I know, I know... SATA is Hot PnP. I'm old school and finally gotten over the fear of Hot PnP USB.
I'm replacing a new Windows 7 PC for a customer and the old PC is WXP. Reason being, the old PC Pwr Supply died. Can I take the old SATA HD w/WXP on it and just plug it into a SATA port on the new PC while it's running to copy files from it (safely).
And can I facilitate a Files and Settings Transfer WXP-to-Windows 7 in this manner?
I am upgrading my HTPC that i put together a few years back to have a SSD as a boot drive to increase space, quiet background running and speed up booting, etc.Everything was running fine before trying to exchange the raptor for the m4. I had a big issue getting Windows installed on m4 but finally did a clean install when no harddrive was connected except the SSD to the original SATA port of the boot drive. Once I had windows installed, and i was able to boot up with only the SSD attached to the boot SATA port, I attached the 3 storage drives to their original SATA ports and got an error when booting... it paused in mid boot, then started searching for a boot disk in the DVD drive. I looked at the BIOS and the SSD is listed as 1st (port0) on hard drive boot order and hard drive is 1st boot priority. I unplugged all 3 storage drives and it booted up without an issue
I have Win 7 Professional x64, and whenever I attach a USB device (my mp3 player, to update its firmware), it installs the drivers needed, then after about 30 seconds automatically detaches (that is, it is shared and auto-reattaches to Windows 7). I have uninstalled and then reinstalled XP mode, uninstalled and reinstalled the Virtualization drivers, and tried using different USB ports. how to make it stay attached until XP Mode is hibernated?
I run Win 7 64 bit with Virtual XP. I loaded HP 5400C software into Virtual XP. I attached Scanner and was able to scan/print and scan/pdf. ie everything worked as it should. A week later Virtual XP requested I run 7 updates. Since 7 updates the Virtual XP sees the scanner. When I request "attach" it goes ding dong. When I check again the wording does not change to "release" I think the problem lies with the recent updating. The scanner software reports the scanner can't be found.
I'm trying to send some pictures and I want to reduce the size of them as I send themI'm using Windows Photo Gallery. I open it. My device is listed on the left hand column and when I click to view it, all it will do is try to import all the 3000 pictures I have on there. I don't want to put them into this new computer as they take up a lot of space. So, I just want to send a couple of them in an email.Maybe in this new computer with 450 GB, it would be okay to import them? can click on photo email as an attachment, and it will give me an opportunity to change the size and put it in the email. That's good, but I can't get to the pictures on my usb drive.I've dug around and found that it will not read unless the drive is listed under: computer, hard drives, and that is something the manufacturer does.
I am using Windows 7 on HP pavillion 33 entertainment notebook for College. I upgraded to IE 9 for college and soon realized that I could not attach my assignments in discussion boards. I then downloaded Firefox in order to try a different browser but in each browser i can not upload attachments.
All of a sudden this evening I can no longer attach multiple images/files to an email. Neither does the "Control-A" or click on a file hold "shift" and click on another file work. Also when I attach a single file instead of giving me the progression bar it almost instantly indicated the file is attached.Of course this is irritating as multiple time a day I will send emails with images attached and I have to have this feature working.
since beginning of july 2012 my laptop won't allow me to upload anything online to sites like facebook, Internet, attach files to emails and other websites. it seems i can't send files through an instant messenger, either, so i know it's not a problem with my browser. i can browse sites and play/watch videos & also download. when i upload a picture or an attachment, the gif image keeps rotating but the upload bar doesnt go above 2%. i've checked windows firewall's advanced settings, and outbound connections are allowed, and all the rules that would say anything isn't allowed don't have anything to do with files to websites. i scanned my pc for viruses using avira antivirus and also malware bytes anti malware. also scanned and fixed registry usingccleaner. finally did a system restore. im using google chrome. tried on mozilla firefox & internet explorer-9 but same result. did a reset as well. my os is windows 7.also i've tried turning off the antivirus & also firewall for public networks. that doesn't help either[code]
Somehow, as usual, I deleted all the shortcuts that I had on my taskbar. In the process or reinstalling the shortcuts, the Revouninstaller shortcut icon just wouldn't attach to the taskbar. There was no pin to taskbar in the content menu.?
if there is a way to open the Command Prompt during Windows XP installation (booted from CD) and find a way to attach a Virtual Hard Disk so you could install XP on it (just like with Windows 7 and 8)?
Every time I try to attach a photo or doc to an email using either Yahoo, Comcast or whatever browser, the system freezes and crashes. I called Microsoft and spent over an hour with one of their techs, and he got it to work for about a week, now it's doing it again
I have a new laptop and it windows 7 I am in Word and trying to attach my document to an email which I did but it won't open when the reciever tries to open it.
Sorry For Start Thread Again. But This Is My Work (Send to My Teacher)>> I Need Replace New Sound Into My Videos File. Example I Don't Need Old Sound At 0:10 - 0:15 In My Videos And I Need Replace It With New Sound [e.g. MP3/WAV]
Unable to save audio recordings in CCIT-ulaw format since we went to Windows 7. Is there a way to revert back to the Windows XP Version of Sound Recorder on Windows 7 or is there a way to save an audio file in different formats like we were able to with the Win Xp version of Sound Recorder?Tried simply copying the sndrec32.exe over from the Win XP machine but that didn't work, got numerous errors when launched.
So ive been getting the black screen with movable cursor lately and have tried many a methods to remove it i tried checking in my event log for something, and this is waht it said "The following boot-start or system-start driver(s) failed to load:dtsoftbus01" So what does this mean and how can i fix this?