I have tried in vain to add a file to the send to folder. I have pasted in the address as shown in many help programs but all that turns up is the normal screen filled with places one can find how to add to send to.
I want to add Power Point Viewer to the send to folder.
I have extracted a HDD from an old PC that ran on Windows XP. I have put it into an enclosure and connected to my Windows 7 Home Premium PC via USB.I cannot open a VHD file. Can I do this with my limited PC knowedge ?
View 2 Replies View RelatedMy old computer was put to rest with a big power surge last week. I had to buy a new computer and now I would like to access my old files. I have taken the hard drive out of my old PC. My new PC of course has windows 7. I am not a computer expert but I am not a novice either. The old hard drive has the sata connection and I have a sata cable, but have never used one previously. I connected the cable to the old hard drive and then plugged in the power cord to the wall outlet. I then I connected the USB cable from the sata cable connected to my old drive to my new PC�s USB port. I haven't been able to access the files on the old drive but I know my new pc has recognized the hardware. After I connected the USB cable to my new pc under Devices I can see a hardware named USB to ATA/ATAPI Bridge. Not sure what that means. There is �No� drive listed for it though when I open Windows Explorer. I can only see the (OS) C drive and the HP Recovery D drive.
View 4 Replies View RelatedI have setup some monitoring software in an XP Virtual Application. More specifically I used the "Virtual Applications: The 'Invisible' Third Mode" method described here.
My challenge is that I need to access the applications database file, and save it to a location on the host computer. It seems to me that the only way to save files from the Virtual Application is through the program itself, and because the program hasn't been designed to save the database file (e.g.: there is no "File - Save DB" command) I am stuck.
If I had setup a Virtual Machine and then installed the software into it I would have the advantage of being able to access the guest file system, however I would not have been able to start my monitoring software whenever a user logs onto the computer.
Is there any way of accessing the host system of a Virtual Application?
i have a laptop with files on it using wifi through router. I have a pc upstairs with eternet cable coming from router . Im looking to send file from laptop to pc . iv bee nhaving problems with work group and everything. i done it before but this laptop has been formated since that so settings arnt the same nw
View 4 Replies View RelatedI'm running on a relatively new install of Windows 7 64bit Ultimate. I recently (about 2-3 weeks ago) installed a new HD and decided to have a fresh start so everything was formatted followed by win 7 install. Everything has been running great up until mid day yesterday. Out of what seems like nowhere I experienced 6 or 7 BSOD's yesterday and from what I could tell they occurred when I tried to do any of the following: 1. Access drive D and play a video file (This is the new HD, it would instantly BSOD). 2. Access internet within 1 minute of startup.
Since yesterday I haven't had any BSOD's and have had the computer running, I haven't tried to play any videos off of HD and haven't reset my computer since (hoping that whatever it was has gone away, although I'm sure it hasn't). For the record I have accessed some music files on drive D without any issue, as well as several word and excel documents (not sure if that makes any difference?)I have a feeling it may have something to do with my new HD that I installed, but have no idea what it could be as it was running without issue up until yesterday (for at least 2 if not 3 weeks).
My system specs are as follows:S: Windows 7 64bit UltimateManufacturer BIOSTAR Group Model A740G M2+ Total amount of system memory 6.00 GB RAMSystem type 64-bit operating system umber of processor cores 2 isk partition (C) 272 GB Free (298 GB Total) isk partition (D) 1630 GB Free (1863 GB Total) isplay adapter type NVIDIA GeForce GTX 460 other info:-all drivers should be up to date to the best of my knowledge- i've looked around and have seen a lot of recommendations to run memtest? I have yet to do soI've enclosed a system health report and minidump file as outlined on forum requirements.
My friend would like to send me a large file (about 6GBS) me and and her have no idea how to do it, since email only lets about 500mb. We tryed sending it through messanger but that failed.
I dont really want to use megaupload because i dont want to then download the file again. Does Skype have a sending limt?
i want MSPview exe file send me to my email given under:[personal info whisked away into oblivion]
View 6 Replies View RelatedI used to send files to my mobile phone via Bluetooth option in the "Sent to" menu. A few days ago I found out it was missing. A further few days back, I reinstalled my bluetooth software as its tray icon was missing I have reinstalled bluetooth software but still the "Sent to -> Bluetooth" option is missing and I couldn't find the option to enable it.I am unable to send files via bluetooth unless connected to PC Suite.
View 8 Replies View RelatedI recently installed windows 7 home premium on my HP G62 notebook PC. When I click on the start menu it shows bluetooth file transfer. When I click that it does says send and receive file but never scans. I tried installing drivers from the HP website. But it does not show on device manager or anywhere.
View 5 Replies View RelatedBy mistake I changed the two pst filenames within windows explorer (Windows7 and Office 2010) instead of just changing the names in the navigation pane of outlook. Now send/receive no longer works. After trying to rechange the names in windows explorer to the previous verion I get the message: operation can not be executed because windows search Protocol host ist open.
View 4 Replies View RelatedI have a Windows 7 32bit laptop and I do not have MS Office installed. I have been using Hotmail until a couple weeks ago when I was "converted" to outlook.com email - which I like OK. When I'm using a browser - IE9 in this case - and when I click on "send link as" or "send page as", it launches Windows Live Mail and puts me in a WLM output email. I would instead like it to launch me into outlook.com and an outlook.com output email. How can I do this - or can't it be done at all?
View 5 Replies View RelatedI'm trying to set up windows 7 so I can access it remotely from my iPad.Ive set up windows 7 to allow remote access. I've tried disabling avg and windows firewall but I still keep getting connection refused.
View 3 Replies View RelatedHere is what is going on. I plug in the MP3 player, does not matter which port, and when I go to "My Computer" to click on the drive to get the music files it comes up with error message "G: is not accessible. Access denied."
I have tried going to properties and configuring security options, but there is nothing with "security" or related to that. I am already logged in as Admin, there is also no "run as admin" either.
Using Win 7 Pro on Dell Latitude D630. I joined my domain and completed all Windows updates. I can access internet as long as I am logged in as administrator,but when logging into the domain as any other user, IE9 remains when blank.I have switched from a static ip address, to a received DHCP address but to no avail.
View 1 Replies View RelatedI have a clients harddrive (XP Home) to extract their data.I just got a Win 7 laptop for servicing computers and discovered I bought a nightmare.I cannot set sharing access to the clients drive in order to extract their files.Any ideas on accessing other drives from Win 7?I have connected this one by USB and even cloned it to empty space on my Win 7 drive.I have been through advanced sharing at the root and every folder I can get to.
View 1 Replies View Relatedi heard that when you delete a file, it actually puts it into a hidden folder in the recycle bin. i enabled the visibility of hidden folders, but i did not see it there.where else could it be?
View 9 Replies View RelatedMy laptop started randomly shutting down a while ago but only when i play a game, but if i have both of my 3d modeling programs, itunes, chrome, and other programs running the computer would run fine for hours on end. A couple days ago the laptop did its usual random shutdown. so i started it back up and the mouse wouldnt work. so after opening it up and reconneting the cable to the board the computer wont boot. It'll get to the starting windows screen but after a minute or two it show a blue screen for about a fraction of a second then restart. It'll keep doing that till i uplug it and take the battery out. I cant start in any of the safe mode options, i cant launch windows repair. Im not able to use a recovery disc cuz the laptop didnt come with one. I basically cant do anything. Now the computer will shut down randomly again but during startup, but the laptop is still cold. So now i decided to take out the hardrive hoping to either save the files or most of them at least or to find the cause of my problem and fixing it. After i hook the hard drive up to my desktop via SATA cable it shows up in My Computer as System Reserved and Local Disk (F: ) but i cant access local disk but i can access system reserve. At the top of the explorer i just get a green bar that never reaches the end and when i click on local disk the explorer becomes unresponsive and what not.
I open devices and printers and it read the hard drive as usb storage so i checked device manager and it recongizes it as a Hitachi Hard Disk. When i click on disk management Nothing happens besides at the bottom it says " Connecting to Virtual Disk Service" for an extreme amount of time. I also tried booting the hard drive on the desktop but it goes through the same proccess as it did on the laptop and i also cant do anything.
I have a desktop (Using it right now) with a hard drive, 7 etc etc and everything works fine. I am however having issues accessing a hard drive from an old lap top I used to own. It was sold, but I kept the hard drive. This was a while ago so I can't remember its OS, but I'm pretty sure it was XP but possibly vista. I have plugged it into one of my towers extra hard drive spots in hopes of being able to retrieve some old pictures from it.This is my problem: After reboot, it got a message saying the usual installing device driver software thing, after that... nothing. I look in my computer and no new drive showed up.
View 1 Replies View RelatedI have installed newly a windows 7 in my pc that it eaither have windows 8 installed in when i boot manage screen is showing only os that i can see is windows 7,i already installed easybcd but it also do not show me windows 8 and actually i do not can boot my windows 8 and use it what can i do?
View 1 Replies View RelatedI have a problem with Windows 7 and the c drive. I will try to explain a little bit the situation: have a Dell xps l501x with a home edition windows 7 licence.Since I prefer to use linux, I resized the Windows7 and create another partition for the linux distribution when I bought. So I had Windows 7 and linux (arch linux) working together for some months.I barely used Windows 7 so I decided to use virtualbox to use windows7 (the raw device as a harddrive). And here started the problems, because I ended with a black screen and the mouse pointer in windows7 (the probably was due to a resolution problem)After many months (as I said, I barely used it), yesterday I decided to fix the problem and I managed to do it. But now I have another problem that I don't know how to fix it (I'm not using virtualbox anymore).
When I start windows 7, the wallpaper is black with the infamous "compilation 7600" and many advice that "is not a genuine copy" (actually it is), and a lot of errors at start. Trying to use the OS:- Many application don't work. Even diskmgmt.msc doesn't work.- I can't access C drive, if I tried prompts an error about permissions, even if I change the permissions I can't access. And If I try to see the properties all the values in the c drive are "0 bytes" (size, free space...)Regarding that, I can't download anything.It seem the c drive is not recognized and I suppose that is the main problem.If I boot with the option "Directory Services Restore Mode" I can acces to C and everything seems to work better. And in the properties the values are correct (the size, free space....)
When using XP and Outlook 7 we were able to create a new email, click the attach button and in the File Name section type http://intranet. This would give us access to the intranet page and the various folders and documents that needed to be emailed to customers.
When using Windows 7 Ultimate or Professional following the above steps will only put a link to the intranet site in as the attachment.
How do I go about replicating the XP way of accessing files on the intranet?
I have a Dell Dimension 8300 and a Gateway MFATXPNT ESX 500S P04 just sitting around. Lately I have been thinking about trying to make one of them into what I can only describe as a VPN. I don't really know what I am talking about so I am going to tell you my result, or the end goal, of what I want to have happen.So basically I want the "Machine" to: act as a firewall, mask my IP and Subnet Address, and encrypt what pages I visit and what I download. I don't have to be able to access it from a remote point but the option is always nice.I am not downloading or uploading anything illegal. I just want another project and I figured this would be good to do until I can go to school to become an IT Administrator.
View 2 Replies View RelatedI had a 3 computer network all running Xp - simple to setup and never any problems. Changed computer 1 & 2 over to Windows 7 Pro and setup workgroup. Have tried everything I could find and so far nothing works. Probably some little ole setting I have missed. Here's what I have
[code]...
I have a readyNAS Duo where I keep all my music files, a few days ago the Raidar program stopped allowing me to browse the drives saying to check spelling and error code 0x80070035 was displayed, I can access the NAS via it's web page but this does not allow me to access the file structure.This is via my router.If I connect the ethernet cable from the NAS straight into the PC all is fine?
View 2 Replies View RelatedUsing Win 7 Pro on Dell Latitude D630. I joined my domain and completed all
Windows updates. I can access internet as long as I am logged in as administrator,
but when logging into the domain as any other user, IE9 remains when blank. I have switched from a static ip address, to a received DHCP address but to no avail.
Recently I dug up one of my older games that I used to love as a kid. The game was one of the first online games, and then offline games when you couldn't get online. However, I managed to make it work on windows 7, but every time I get on it will spend 5-10 minutes trying to ping the dedicated server that no longer exists.
My real question is there a way that I can make it so just that one program cannot access the web, if I can pull that off then I won't have to wait a year to play each game.
I can't seem to access the installation directory in Auslogics Boost-speed 5 of course I am very new at working with computers!
View 2 Replies View RelatedI have an external USB 3.0 HDD as well as an internal SATA 3 HDD. I am unable to eject (ie "Safely Remove Hardware and Eject Media" ) either the drives because I get the error:Quote :This device is currently in use. Close any programs or windows that might be using the devices, and then try again?
View 1 Replies View RelatedI had a Dell Laptop with Win7 64-bit. But there was a problem and it wouldn't boot anymore. The problem is that there are some very important files in that laptop. So, I got that hard drive out and connected it to my Toshiba (Win7, 32-bit) as an external drive. I was not able to access the 'user' files from the dell. When I tried to open it, I got an error message 'access denied'. So, I went to properties --> Security --> Advanced, and changed the permissions to everyone. Now, when I open the folder 'Documents and Settings', it opens the folder on my Toshiba, and not the actual files that are on that hard drive. I need to get those files out of there.
View 7 Replies View Relatedif it is even possible to access my i870 with a usb cable?
View 2 Replies View Related
