I'm trying to set up windows 7 so I can access it remotely from my iPad.Ive set up windows 7 to allow remote access. I've tried disabling avg and windows firewall but I still keep getting connection refused.
View 3 RepliesI'm running on a relatively new install of Windows 7 64bit Ultimate. I recently (about 2-3 weeks ago) installed a new HD and decided to have a fresh start so everything was formatted followed by win 7 install. Everything has been running great up until mid day yesterday. Out of what seems like nowhere I experienced 6 or 7 BSOD's yesterday and from what I could tell they occurred when I tried to do any of the following: 1. Access drive D and play a video file (This is the new HD, it would instantly BSOD). 2. Access internet within 1 minute of startup.
Since yesterday I haven't had any BSOD's and have had the computer running, I haven't tried to play any videos off of HD and haven't reset my computer since (hoping that whatever it was has gone away, although I'm sure it hasn't). For the record I have accessed some music files on drive D without any issue, as well as several word and excel documents (not sure if that makes any difference?)I have a feeling it may have something to do with my new HD that I installed, but have no idea what it could be as it was running without issue up until yesterday (for at least 2 if not 3 weeks).
My system specs are as follows:S: Windows 7 64bit UltimateManufacturer BIOSTAR Group Model A740G M2+ Total amount of system memory 6.00 GB RAMSystem type 64-bit operating system umber of processor cores 2 isk partition (C) 272 GB Free (298 GB Total) isk partition (D) 1630 GB Free (1863 GB Total) isplay adapter type NVIDIA GeForce GTX 460 other info:-all drivers should be up to date to the best of my knowledge- i've looked around and have seen a lot of recommendations to run memtest? I have yet to do soI've enclosed a system health report and minidump file as outlined on forum requirements.
if it is even possible to access my i870 with a usb cable?
View 2 Replies View RelatedI installed a second HDD on my laptop that can have up to 4 different HDD. I have a XP running on the first HDD. I just installed Windows 7 Premium 32bit on the second HDD. When the installation was done, Windows 7 can see and access the folders/files/drives from the first HDD. How do I restrict this? I knew how to do this with XP but I can't figure out how to do this with Windows 7. Basically, I don't want the Windows 7/Second HDD interacting with the first.
View 2 Replies View RelatedI got another SSD for my system, win7x64 professional, plugged it in as master and made a fresh new install on it and therefore a new mbr was created during installation. Now I need to access the working OS I have installed on the older SSD and used as a main drive before. How to make the current bootloader know that there is another windows 7 installation on a different drive that I would like to be able choose to boot in at startup?
View 4 Replies View RelatedI have been running into this problem recently where i cannot access another computers hard drive from windows 7, knowing the username and password. I have tried using "ComputernameUsername" as the user name, along with "Username@computername" to no avail. What is really confusing me, making me wonder if this will work at all, is the fact that windows 7's username prompt specifies a domain. Considering none of my computers are, or have the ability to be, on a domain, this is an odd question to ask. Does anyone have a way around this that doesn't require changing settings on the computer that i need to access?
View 3 Replies View RelatedI have two networked computers belonging to the same workgroup: one with Windows 7 Ultimate SP1 64-bit and the other with Windows XP Pro SP3.On the XP computer, I shared a folder allowing only the access to the Administrators group.Now, from Windows 7, I can see this shared folder, but when I try to use it, the no authorization message is displayed.Why the Login window is not displayed?
View 4 Replies View RelatedMy Windows 7 machine runs in the subnet 192.168.1.x (actual IP 192.168.1.33) and there is a Linux machine with windows share (smb or Samba) on a different subnet 192.168.2.x (actual IP 192.168.2.5). There is a router inbetween of course.Before they were on the same subnet and I could easily see the Linux machine when using Windows Explorer and clicking on Network. Now, I can't see it anymore.
View 1 Replies View RelatedI had two hard drives in a Windows 7 system. One had the operating system and the other was for storage. The storage drive is a a 2 TB drive. I am not sure what format was selected on the hard drive. If this information is needed, I can do so with guidance how to find this information. The 2 TB has a lot of data. The drive was removed. Later the main drive with the operating was formatted, and the 2 TB drive was put back into the computer, but new Windows 7 does not recognize the drive.
I am not sure if Windows 7 updates have been run, so maybe this is a driver issue? I tried to access the drive through Linux, and Linux showed the drive as empty. I am wondering if some weird security feature was enabled? If so, is there any easy way to get the data back? In windows 7 under devise manager, the drives shows up, but I can only see the devise name. I also tried accessing the drive in external case in a Mac Lion System, and could not get the drive to open up.
I have below configuration.
Board - DQ67SW.
CPU - i5-2500
HDD- 1 TB 2 HDD's
SMPS/Power Suppply 600W.
RAM- 8 GB 2gb in each slot.
OS - Windows 7 Ultimate edition.
My machine gets hang or get rebooted frequently. What can be the cause. Do I need to purchase high volt smps.
I have recently acquired a new computer with Windows 7. I have email accounts with Tiscali and I access these through Windows Live Mail as Windows 7 doesnt work with Outlook Express. I have set up Windows live and am receiving and sending emails from Tiscali via my Hotmail address with no problems but when the messages are downloaded onto my computer through hotmail they still remain in my inbox on the server at Tiscali. This results in my Tiscali inbox gradually filling up so I have to log into Tiscali at regular intervals and empty it. Is there a way of automatically deleting the emails from my Tiscali inbox once I have downloaded them to the computer via my Hotmail address.
View 4 Replies View RelatedI can't seem to find a solution anywhere but the problem is. I have one central computer with windows 7 on it. When any computer in the house, whether it be my laptop with Vista, my desktop with XP, or my other desktop with Windows 7 connects to that network drive it hangs for a couple minutes before being able to open the file, or copy the file. This happens on all 3 machines accessing the network drive on the central computer. This same result occurred when I setup my other desktop with windows 7 so that makes me think its something with windows 7 itself.I do not have any firewall/antivirus programs installed, and I even turned off windows firewall and windows defender on the server that were all accessing.
View 1 Replies View RelatedI am running Win XP SP3 and I plan to upgrade to Windows 7. I currently have two hard disks as one is the system hard disk and the second drive is my data disk (E: Drive).If I upgrade to Windows 7, will I still be able to read the data on the E: drive? If Windows 7 can read the data, would it make sense to back up any files on the system hard disk to the E: drive so I could copy the files back to C: drive after Windows 7 install? All drives are currently NTFS.
View 18 Replies View Relatedmy computer was unable to access the restore feature hidden on the harddrive on a separate partition. I used the diskpart feature in windows dos prompt to make the restore partition active. Upon bootup, the Gateway restore program comes up automatically and it states it cannot run (memory error). For now, I'd like to just put back the previous partition which was active, but I can't get into the DOS prompt. I made a DOS reboot disk in FAT32, but it doesn't give me access to my harddrive nor does it have the dispart program.Any way to get DOS to work without windows and making this change?
View 2 Replies View Relatedi have a policy in windows firewall "Core Networking - DNS (UDP-Out)" that allows all programs to access the dns server, but i want to choose which programs are allowed, how to do so?
View 1 Replies View RelatedI have Windows 7 Pro 64 bits SP1 installed. Here's the deal. My system crashed overnight (no one knows why). When it boots back up, it works fine for a while and then Freezes (no more mouse mouvement, no more num-lock light switching on/off). Windows Event is of course empty. I was able to figure out where the source of the problem is. Seems that the whole Restore Point thing is corrupted. Including the Auto part where once in a while it creates a back-up point during boot up. I have tried in normal mode: Accesing the restore to a previous point through Windows normal mode: Freezes every single time when i hit the configure button to remove the Restore point from my C: Drive. Accessing it through CCLeaner and trying to remove a single Restore Point: Freezes. Accessing it through Disk Cleaner, Delete all the restore points. It works... but never ever delete anything.!
View 9 Replies View RelatedI asked this question recently, then realized I may have asked in the wrong forum. Here is my problem : trying to access folders shared on a win 7 machine from a win xp machine is causing windows explorer to crash. The issue is intermittent and I can't figure out at all what is causing it.
View 1 Replies View RelatedI have an XP virtual machine running on a 64-bit Win 7 host. I have a home wireless network that I need to access from the XP VM in order to use printers attached to the other computers on the network. All computers currently on the network have the same workgroup name. I have networking on the VM set to use the wireless adapter on the host laptop. With this configuration I can see and access the host, but I cannot see nor access any other computers on the network.
Now, it seems to me that I will need to run the XP Network Wizard to set up the network on the VM before I am able to see the network, but after reading dozens of articles and posts on networking a VM, I have never seen this step mentioned. (I am at work now, so I can't test this out on my network until later.) So, my questions are:
(1) Do I need to run the XP Network wizard to get the VM to join the wireless network, and
(2) if I don't need to run the wizard, what DO I need to do to get this to work?
Since two days ago I cant access internet anymore. Called the provider, they send a tchnician and he told me that its a new problem in a recent (1 week old) version of windows 7.In normal mode I cant acces but in protected mode I can (without all funcionalities).The technician told me to look for a support.
View 2 Replies View RelatedI have three computers all running Windows 7 Ultimate x64, one of which functions partly as a media center (hosting music etc), the second and third being my office workstation and laptop respectively. The media center has a hard line to my cable modem (via Trendnet wireless-N router) while the latter two connect via wireless; the workstation via a wireless ethernet hub and the laptop via it's integrated wireless.I currently have all of my media folders shared via homegroup on the media center.
My laptop (Lenovo Thinkpad W500) can access all of the shared folders.My office workstation, while I can "see" the shared libraries/folders on my media center, hangs (the explorer window appears to be perpetually loading) whenever I attempt to open any of the folders. Sometimes when this happens I can kill/restart explorer but ever so often explorer itself will be unable to restart and I will have to reboot the entire machine.I have Windows Security Essentials running on both machines - all three are almost identical with respects to the installed software.I have tried reconfiguring the homegroup multiple times, flushing the dns cache, resetting and cycling the router, and have even swapped out wireless adapters (on the problematic workstation) to no avail.
When I access a certain folder in my hard disk, after 2-5 seconds I get a dialog box saying "windows explorer has stopped working" and I get two options "check online" and "restart windows explorer" then I copied that folder to another destination and I could access it but the following days the new destination also started giving the same problem. I used tools like "scan disk" and "defragmentation" but nothing worked. I use Windows 7 64 bit unlimited.
View 34 Replies View RelatedHere is what is going on. I plug in the MP3 player, does not matter which port, and when I go to "My Computer" to click on the drive to get the music files it comes up with error message "G: is not accessible. Access denied."
I have tried going to properties and configuring security options, but there is nothing with "security" or related to that. I am already logged in as Admin, there is also no "run as admin" either.
Using Win 7 Pro on Dell Latitude D630. I joined my domain and completed all Windows updates. I can access internet as long as I am logged in as administrator,but when logging into the domain as any other user, IE9 remains when blank.I have switched from a static ip address, to a received DHCP address but to no avail.
View 1 Replies View RelatedI have a clients harddrive (XP Home) to extract their data.I just got a Win 7 laptop for servicing computers and discovered I bought a nightmare.I cannot set sharing access to the clients drive in order to extract their files.Any ideas on accessing other drives from Win 7?I have connected this one by USB and even cloned it to empty space on my Win 7 drive.I have been through advanced sharing at the root and every folder I can get to.
View 1 Replies View Relatedi heard that when you delete a file, it actually puts it into a hidden folder in the recycle bin. i enabled the visibility of hidden folders, but i did not see it there.where else could it be?
View 9 Replies View RelatedMy laptop started randomly shutting down a while ago but only when i play a game, but if i have both of my 3d modeling programs, itunes, chrome, and other programs running the computer would run fine for hours on end. A couple days ago the laptop did its usual random shutdown. so i started it back up and the mouse wouldnt work. so after opening it up and reconneting the cable to the board the computer wont boot. It'll get to the starting windows screen but after a minute or two it show a blue screen for about a fraction of a second then restart. It'll keep doing that till i uplug it and take the battery out. I cant start in any of the safe mode options, i cant launch windows repair. Im not able to use a recovery disc cuz the laptop didnt come with one. I basically cant do anything. Now the computer will shut down randomly again but during startup, but the laptop is still cold. So now i decided to take out the hardrive hoping to either save the files or most of them at least or to find the cause of my problem and fixing it. After i hook the hard drive up to my desktop via SATA cable it shows up in My Computer as System Reserved and Local Disk (F: ) but i cant access local disk but i can access system reserve. At the top of the explorer i just get a green bar that never reaches the end and when i click on local disk the explorer becomes unresponsive and what not.
I open devices and printers and it read the hard drive as usb storage so i checked device manager and it recongizes it as a Hitachi Hard Disk. When i click on disk management Nothing happens besides at the bottom it says " Connecting to Virtual Disk Service" for an extreme amount of time. I also tried booting the hard drive on the desktop but it goes through the same proccess as it did on the laptop and i also cant do anything.
I have a desktop (Using it right now) with a hard drive, 7 etc etc and everything works fine. I am however having issues accessing a hard drive from an old lap top I used to own. It was sold, but I kept the hard drive. This was a while ago so I can't remember its OS, but I'm pretty sure it was XP but possibly vista. I have plugged it into one of my towers extra hard drive spots in hopes of being able to retrieve some old pictures from it.This is my problem: After reboot, it got a message saying the usual installing device driver software thing, after that... nothing. I look in my computer and no new drive showed up.
View 1 Replies View RelatedI have installed newly a windows 7 in my pc that it eaither have windows 8 installed in when i boot manage screen is showing only os that i can see is windows 7,i already installed easybcd but it also do not show me windows 8 and actually i do not can boot my windows 8 and use it what can i do?
View 1 Replies View RelatedI have a problem with Windows 7 and the c drive. I will try to explain a little bit the situation: have a Dell xps l501x with a home edition windows 7 licence.Since I prefer to use linux, I resized the Windows7 and create another partition for the linux distribution when I bought. So I had Windows 7 and linux (arch linux) working together for some months.I barely used Windows 7 so I decided to use virtualbox to use windows7 (the raw device as a harddrive). And here started the problems, because I ended with a black screen and the mouse pointer in windows7 (the probably was due to a resolution problem)After many months (as I said, I barely used it), yesterday I decided to fix the problem and I managed to do it. But now I have another problem that I don't know how to fix it (I'm not using virtualbox anymore).
When I start windows 7, the wallpaper is black with the infamous "compilation 7600" and many advice that "is not a genuine copy" (actually it is), and a lot of errors at start. Trying to use the OS:- Many application don't work. Even diskmgmt.msc doesn't work.- I can't access C drive, if I tried prompts an error about permissions, even if I change the permissions I can't access. And If I try to see the properties all the values in the c drive are "0 bytes" (size, free space...)Regarding that, I can't download anything.It seem the c drive is not recognized and I suppose that is the main problem.If I boot with the option "Directory Services Restore Mode" I can acces to C and everything seems to work better. And in the properties the values are correct (the size, free space....)
When using XP and Outlook 7 we were able to create a new email, click the attach button and in the File Name section type http://intranet. This would give us access to the intranet page and the various folders and documents that needed to be emailed to customers.
When using Windows 7 Ultimate or Professional following the above steps will only put a link to the intranet site in as the attachment.
How do I go about replicating the XP way of accessing files on the intranet?
I have a Dell Dimension 8300 and a Gateway MFATXPNT ESX 500S P04 just sitting around. Lately I have been thinking about trying to make one of them into what I can only describe as a VPN. I don't really know what I am talking about so I am going to tell you my result, or the end goal, of what I want to have happen.So basically I want the "Machine" to: act as a firewall, mask my IP and Subnet Address, and encrypt what pages I visit and what I download. I don't have to be able to access it from a remote point but the option is always nice.I am not downloading or uploading anything illegal. I just want another project and I figured this would be good to do until I can go to school to become an IT Administrator.
View 2 Replies View Related