Accessing Share Folder On Windows 7 Machine Crashing Xp
Aug 19, 2011
I asked this question recently, then realized I may have asked in the wrong forum. Here is my problem : trying to access folders shared on a win 7 machine from a win xp machine is causing windows explorer to crash. The issue is intermittent and I can't figure out at all what is causing it.
My Windows 7 machine runs in the subnet 192.168.1.x (actual IP 192.168.1.33) and there is a Linux machine with windows share (smb or Samba) on a different subnet 192.168.2.x (actual IP 192.168.2.5). There is a router inbetween of course.Before they were on the same subnet and I could easily see the Linux machine when using Windows Explorer and clicking on Network. Now, I can't see it anymore.
ive got 2 computers hooked up to a router by Ethernet sharing an internet connection, the internet connection works fine for both computers. i would like to share documents also between the computers
-one is a windows xp 32 -one is a windows 7 64
ive set up many networks in the past with a bunch of xp machines without any trouble but now i am having trouble my first step was on the windows 7 machine, i went to control panel -> network and sharing center -> setup a connection or network -> set up a new network this is where i believe i am making a mistake of some kind, it seems that the windows 7 machine is assuming that i want to set up the network wirelessly, when it is connected to the router via Ethernet. it simply brings me to a screen that says choose the wireless router or access point you want to configure, and hangs there with a greyed out next button everything seems to be going fine on the xp machine, i created a new network called "share bear", told it that the computer connects through a residential gateway, enabled file and printer sharing, rebooted the machine, and confirmed that there was a new folder in the network places for shared documents..i went back to the windows 7 machine where it was still hanging, rebooted it, looked for the new network in network and sharing center and it wasn't there, i tried again to "set up a new network" on the windows 7 machine with the same hanging screen
I have an XP virtual machine running on a 64-bit Win 7 host. I have a home wireless network that I need to access from the XP VM in order to use printers attached to the other computers on the network. All computers currently on the network have the same workgroup name. I have networking on the VM set to use the wireless adapter on the host laptop. With this configuration I can see and access the host, but I cannot see nor access any other computers on the network.
Now, it seems to me that I will need to run the XP Network Wizard to set up the network on the VM before I am able to see the network, but after reading dozens of articles and posts on networking a VM, I have never seen this step mentioned. (I am at work now, so I can't test this out on my network until later.) So, my questions are:
(1) Do I need to run the XP Network wizard to get the VM to join the wireless network, and (2) if I don't need to run the wizard, what DO I need to do to get this to work?
I have an XP pro x32 machine on wireless with shared folders, a 7 Ultimate x64 machine (fresh install) on wireless, and Linksys Wireless/wired router (I'll get the model number later, can't remember). I've had the shares on xp set up for a long time and never had an issue with them on XP or Vista machines. The two machines are on the same router, same subnet, same workgroup (home), individually assigned IPs, and can access the outside fine. 7 does not have a "share group" set up. Whenever I access a shared folder from the 7 machine it connects fine until I start to transfer files. It will make it anywhere from a few seconds to a couple of minutes before the wireless connections on both machines are dropped. The connection problems only happen when copying shared files; I can browse shared folders or internet all I want.Side note that may or may not have any bearing: I had been having an issue where the wireless adapter didn't exist (device manager or anywhere else) after coming back from sleep. That required me to reboot to see it again. I fixed it by disabling the save power feature on the driver and disabling sleep mode.
old system was laptop running XP with desktop also running XP. We set up a "shared documents" folder with simple file-sharing on the desktop which the laptop could access when not working out of the office via DSL high-speed router. We just upgraded to a new laptop running 7 Pro and it automatically detected the router and I selected "work network" during setup. I can't even see the desktop on the "new network" dsiplayed on the "new laptop" - do I need to set up a new connection on the XP desktop or what?
I've been going round and round trying to resolve this problem with no success. We have a small business using a PC as a server. The "Server" and all the PCs except one (the accounting machine) are running Windows 7 Pro (64-bit). All machines (including XP) are using the same workgroup name: WORKGROUP. The problem I'm having is that the XP machine can neither see the Workgroup, nor can I map the machine to the Shared folder on the Win 7 machine. I've been through all the set up scenarios from Microsoft but without success. I know there's handshaking going on because the Win7 Server can see and access the shared directories on the XP machine. It just doesn't work the other way.
i switched my bosses computer to Windows 7 here at work, all went fine.. we are using win98 under VMWARE 6.5 for our windows 98.. everything works great, except i cannot get it to access the printer on the Windows 7 machine, it sees it but always gets a access denied error, i have turned off password sharing.. and any of the xp/Windows 7 machines see it fine.. just the damn 98.. and i can't not use 98 cause of our POS software...
XP: Physical to Virtual & Share Drive w Host? Disk2VHD vs VMWare P2V? Physical-to-Virtual - Wikipedia, the free encyclopedia My Thinkpad X61T with recent 8GB DDR2 Upgrade:I have an XP Pro 3 instance on a HDD able to use 2.99 GB RAM. I can backup bunch of data files to make size smaller.I have a Win 7 x64 instance on another HDD that can use most of the 8GB RAM. Now, I'd like to do two things:
1. Virtualize the XP instance and create a Virtual Disk/ Virtual Machine, with all of the Programs & Settings intact.
2. Run this XP on top of Win 7 x64 Host and "Slowly" Migrate Files/ Settings/ MetaData etc. from GUEST XP to HOST machine.I'd prefer to be able to SHARE "the C: or Boot Drive" between the GUEST & HOST machines (as it is mounted/ running) and be able to COPY some Specific Files/Folders using ROBOCOPY/ RICHCOPY to maintain attributes that could/ easily get lost with any other copy method.Thoughts/ suggestions, experiences, comparative reviews on using Software/ Tools out of the above listed page and how could go about doing both the things.do let me know UPDATE: Some advise/ suggestions I got on another forum was. Quote: If it were me, I'd use DISK2VHD on the XP hard drive, copy it to the Windows 7 machine, install XP Mode, and fire it up like that.An alternative, in some ways better, would be to use VMWare's P2V converter on the XP machine, install VMWare Player on the 7 machine, and load the virtual machine on there.If you're just worried about docs / settings / etc, I'd suggest skipping virtualization and just use Windows Easy Transfer to make a clean break. I've used VMWare and Virtual PC a LOT in the past, but not used in a long time. I know some functionality for items 1 & 2 exist but wanted to get a comparative idea between the various options LISTED in the Link. I guess I was a little out of touch when I realized so many products existed just to do P to V. I remember only VMWare had that for a while.For me the ability to "share" & "copy" these files is critical. PS: Also, I may or may not have enough storage on the Win 7 x64 drive so I'll have to run the guest VM from a USB 2.0 HDD. Would that work okay? For now, if the suggestion give by someone from the other forum still holds. What are the pros vs cons of Disk2VHD vs VMWare? (Given the specifics of my scenario?)Esp Sharing Drive & Copying using RoboCopy/ Richcopy (To maintain Modified/ Created Dates .. Wish there was way to keep Accessed Date)
When I access a certain folder in my hard disk, after 2-5 seconds I get a dialog box saying "windows explorer has stopped working" and I get two options "check online" and "restart windows explorer" then I copied that folder to another destination and I could access it but the following days the new destination also started giving the same problem. I used tools like "scan disk" and "defragmentation" but nothing worked. I use Windows 7 64 bit unlimited.
i heard that when you delete a file, it actually puts it into a hidden folder in the recycle bin. i enabled the visibility of hidden folders, but i did not see it there.where else could it be?
I recently made a folder to share with an XP machine. When I look at the network through my seven machine I see the folder I shared and the USERS folder shared as well. Why is that? I have the network setup at a home network. 7100 32 bit.
Last night, I built my first desktop machine. Most of my components were brand new, but I kept my old hard drive.(Which contained my Windows Home Premium 64 bit OS on it.)
When I finally went to power it up for the first time, it booted up normally, and then when it goes to the black screen with the colors swirling together to make the windows logo, right away it quickly flashed to a blue screen and then restarted.
I then went into the repair windows mode, but the automatic repairs failed. They left me with these details:
Problem Signature 01: 6.1.7600.16385 Problem Signature 02: 6.1.7600.16385 Problem Signature 03: unknown Problem Signature 04: 21200924 Problem Signature 05: Autofailover Problem Signature 06: 3 Problem Signature 07: No Root Cause OS Version: 6.1.7600.2.0.0.256.1 Locale ID: 1033
The hard drive with the operating sytem was working fine for me yesterday in my old machine. So I am assuming it has to be a problem with the new hardware, or I failed to connect something, or i need to change a setting.
how to do this on Windows Vista/Windows 7. Here's what I'm trying to accomplish. I want to stream some of my video files from a PC to my iPad. I can do this using a third party app that runs on my iPad that can connect to a computer via a WiFi network. I managed to do this quite easily on Windows XP and I can stream AVI files from the "C:Documents and SettingsAll UsersDocuments" folder. All I did is this -- I right-clicked on the Documents folder there and selected Properties, then Sharing tab and set "Share this folder on the network", named it and OK'ed it. After that I can easily see that folder from the app running on my iPad and stream files out of it.
Windows Vista and Windows 7 aren't as easy to set up and they don't have the same controls as Windows XP.
I have created one share folder in windows 7 and put lot of data in it, once i faced problem in accessing the share folder from the network, i removed the sharing from the folder which i shared but what happened is the data's which is in the shared folder got disappeared
I'm trying to access a shared folder on my windows xp machine. i went to map network drive, use different credentials, and typed in the account name and password that i had given rights to on the other computer. but it just reprompted for different credentials.as a temporary fix i created a user on this computer with the exact same credentials as the ones i typed in, and it works for that user. so apparently the computer didnt understand what i typed in for 'use different credentials'?
I have gone through my Network and Sharing Center in Windows 7RC and turned everything on except Password Protected Sharing. I have joined both Windows 7 and Xp machines into WORKGROUP. I can access my Public folder and my shared printer from my Windows 7 machine on my XP machine. I'm trying to share my Mp3 folder, thats on a secondary HDD in my Windows 7 machine.
Path being "E:StuffMp3z". No matter what I change as far as permissions, adding HomeGroupuser to the Advanced Sharing dialog...everything I've tried, my XP machine can see the share, but I get the ".......is not accessable. You may not have permissions...." error in XP trying to open the shared folder. And what's up with not having a folder icon with a Share symbol in Windows 7 so by looking in Explorer you can tell a folder is shared?
On Windows 7 x64Windows explorer crashes whenever I try to make a new folder or right click. I have disabled every non microsoft context menu using SellExView but that did not help. I think there is a way to get a stack trace and analyze it but I have no idea how to do that?
My PC is connected to a home wireless network and there are two more computers in the same network (a mac and a pc). I want to share the public folder so I can exchange files between computers by writing them to the public folder. But still I want to make sure that only the public folder is shared and nothing else of my computer can be accessible by another computer in the wireless network
I am trying to share a folder that has sub folders (for example, username>documents). I change the sharing to share the folder of username, and I allow the network users to change the files. this is in xp. i access it from my win 7 machine, and when i try to access documents, it says that it cannot access it because I don't have permissions. Is there a way to cascade this sharing change, instead of having to manually change the sharing permissions of each folder?
I have found lots of ways to password protect foldres. But I can`t find a way to passwordprotect the access over local network. (and hamachi2)I have tried to make a user (test) and the password (test, on that user).I have tried to share the folder, and just grant access for the test user.And I can see it if I use another computer, but I can`t access it.The other Pc I use, do not have the Test user installed, and that is the way I want it.I don`t want to add the user to all computers. I just want to give it a password, so you have to know that to go in to the folder.
Im not sure wheres best to post this so if this is the wrong place please let me know where to repost.
Ive recently set up my xbox to be able to play movies from my pc that are in the folder 'C:UsersTom HartVideos' but i have many on my external harddrive that i cant put in that folder as it will fill my internet drive up.
Is it possible to share the folder on my external HD with my xbox too?
I am seaching for a way to assign sharing permissions FROM COMMANDLINE for a particular user with particular permission under Windows 7 (!). Something like
After running all the most current Windows 7 updates, my Windows 7 laptop using Wi-Fi can no longer communicate with shared folders on my desktop XP PC that�s hardwired to my Netgear G router.My XP desktop can still access the folders on the Windows 7 laptop. Both PC�s can access the web. If I run System Restore to an older date everything work just fine.
I have a home group network consisting of a vista laptop and a Windows 7 desktop.I recently had to do a reinstall/upgrade Windows 7 on the desktop.The file sharing works okay except for one problem ... I am no longer able to share the My Pictures folder on my desktop with the laptop. I've repeatedly tried to set the share and advance share options on the the desktop's My Pictures folder, but it still will not work..I keep on getting the same window message "Windows cannot access \DESKTOPMy Pictures"When I press the Network Diagnose button I get a message that says The user account you are logged in with was denied access Make sure you have permission to access the shared folder?
Im after trying to sync a folder from my laptop to a network share on a windows 2003 file server. Not exactly sure how to go about doing it. I would like files to sync both ways so any changes i make to the folder on my laptop get applied to the share on my file server and any changes to the share on the file server are applied to the file on my laptop.
I had a look at sync centre which i believe is 7's version of offline files. I made a test share on my file server and set it to "Always Available Offline"
Now where do i go from here? Is it just a case of setting the foder on my laptop to point towards the network share?
I set up my folders to share over SMB, but it appears I didn't set up all of them to share with everyone.I'm trying to re share them but I can't seem to get to the same wizard. When i right click on a folder it gives me the option to 'Share With ...' rather than just 'Share ...' If i click 'Share with ...' it takes me into the Folder Properties window and selects the sharing tab. it doesn't bring up the normal windows share wizard. Any ideas how I get back to the normal windows 7 share wizard?