Here is what is going on. I plug in the MP3 player, does not matter which port, and when I go to "My Computer" to click on the drive to get the music files it comes up with error message "G: is not accessible. Access denied."
I have tried going to properties and configuring security options, but there is nothing with "security" or related to that. I am already logged in as Admin, there is also no "run as admin" either.
I'm running on a relatively new install of Windows 7 64bit Ultimate. I recently (about 2-3 weeks ago) installed a new HD and decided to have a fresh start so everything was formatted followed by win 7 install. Everything has been running great up until mid day yesterday. Out of what seems like nowhere I experienced 6 or 7 BSOD's yesterday and from what I could tell they occurred when I tried to do any of the following: 1. Access drive D and play a video file (This is the new HD, it would instantly BSOD). 2. Access internet within 1 minute of startup.
Since yesterday I haven't had any BSOD's and have had the computer running, I haven't tried to play any videos off of HD and haven't reset my computer since (hoping that whatever it was has gone away, although I'm sure it hasn't). For the record I have accessed some music files on drive D without any issue, as well as several word and excel documents (not sure if that makes any difference?)I have a feeling it may have something to do with my new HD that I installed, but have no idea what it could be as it was running without issue up until yesterday (for at least 2 if not 3 weeks).
My system specs are as follows:S: Windows 7 64bit UltimateManufacturer BIOSTAR Group Model A740G M2+ Total amount of system memory 6.00 GB RAMSystem type 64-bit operating system umber of processor cores 2 isk partition (C) 272 GB Free (298 GB Total) isk partition (D) 1630 GB Free (1863 GB Total) isplay adapter type NVIDIA GeForce GTX 460 other info:-all drivers should be up to date to the best of my knowledge- i've looked around and have seen a lot of recommendations to run memtest? I have yet to do soI've enclosed a system health report and minidump file as outlined on forum requirements.
if I can sync my ipod on Windows 7 Media player.
View 2 Replies View Relatedwhen i try to open e drive it doesn't open."E;/ is not accessible" this error will get.so how will recover the data on e disk?
View 1 Replies View RelatedA while ago my computer froze up and I couldnt do anything, so I had to restart it. When it came back up my D drive wasn't accesible. If i try to open it it says I need to format it to use it. If I click cancel it says
D: is not accessible.
The volume does not contain a recognized file system. make sure that all required file system drivers are loaded and that the volume is not corrupted.
If i click format it says
Windows was unable to complete the format.
ther's a drive somethng lyk microsoft office clik to run and whn i try 2 access it says access is denied Q: not accessible acccess is denied
View 1 Replies View Relatedcannot access external HDDs connected via USB. The Device Manager shows a device. Under "Properties, Volume, polulate" it shows a zero capacity however. There is no letter (in "my computer") assigned to any drive I connect. Diskmanager does show it but as "not initialised". The attempt to initialise it returns "not ready".
PS: ALL HDDs do show in Kubuntu. So I'd exclude a hardware problem. HDDs are formatted in journalised ext3/4 as well as NTFS/FAT32. Should at least show FAT32/NTFS drives and partitions, shouldn't it?
Under the libraries area there are some folders that won't open.I moved some from another computer but now can't access them, I'm the only one with an login on this computer.Here's one of the paths that won't let me in:C:UsersGZDocumentsMy VideosI have other folders too with the same problem.On Windows ME I could change anything I wanted, even system files.I'd like to open all files if I want, I tried to do something with permissions but don't want to cause problems.
View 9 Replies View RelatedMy Iomega 2Tb is not accessible, whenever i ope it it says drive not accessible , paremeter not found.
View 1 Replies View Relatedi am trying to copy few songs to my cd and it is not letting me paste on the Cd drive (D, I have been doing the sane thing all the time. although I havent burn CD for 3 months now. so i am not sure. in the drive's property it says that drive is not accesible by windows. please help me i need to burn the Cd and it wont let me do it.
View 3 Replies View RelatedFor some unknown reason i have suddenly started getting the message " location is not available c: is not accessible - access is denied " i have made sure i am the Administrator and in that account.
View 4 Replies View RelatedI have no idea what my mother has done but when I got the computer I started recieving all types of error messages and all pointed to the Temp folder. I also did a scan with Registry Easy and fixed all the new errors that appeared with this but all were fixed besides the Temp folder.
I searched and no one has given me a straight answer. I dont have the Windows 7 disc because I got this computer from a pawn. (nothing was wrong with it I know for a fact) Is there any other way to fix this besides restarting the entire pc. I know there is...
the Temp folder has crippled nearly 45% of my pc. I have work to finish up and this is killing me
I got pop up in utorrent says a directoy is corrupt, I start to run chkdsk on that drive. in this case in have drive letter E.I click on computer, then go to the drive, right click, properties, tools, check now.
it says the drive is need to to forced to dismount. I click on ok. then in computers, the drive just show the letter, not size or disk meter. In the open windows on task bar, I did not see scan disk running, or maybe I accidently closed because I was switching between several programs. I thought restart pc the drive will show again, but after restart, the drive does not show up, it says 'E: is not accessible, the file or directory is corrupted and unreadabe.' I tried to start pc 2 times, still same.
My Windows7 suddenly displayed a default desktop. I then did an unsuccessful system restore, tried the undo and got stuck. From there on, when I want to log in I end up at the error message "The user profile service failed the logon. User profile cannot be loaded". I tried to activate the administrator account by using "net user administrator /active:yes". The command executes, but administrator never shows up on the login screen. I cannot start Windows 7 in safe mode. A few seconds after the safe mode login screen appears the computer restarts automatically. No administrator account is listed here either.
View 9 Replies View RelatedAs written above, my external (WD) harddisk drive cannot be accessed. At first it ask me to format my drive but i clicked no. then i used testdisk to write to the table. and then i restarted my computer. but then now it says drive is not accessible?
View 1 Replies View RelatedMom bought a Win 7 puter so that my 15 year old grandson, who lives with them, could use it for school work, and play games. She uses it a little to email, IM, and play card games. Mom and dad are in their 70s and don't know anything about puters. They barely know how to use a remote control on a cable box. My grandson began downloading games that install BHOs, toolbars, plugins, etc that slow the machine down till it hangs frequently. I took it, created an admin account, cleaned off a billion toolbars, BHOs and unwanted games, and their tracking cookies, some Trojans, and viruses, and the machine began to respond again, but as soon as he gets hold of it, he accesses the User's Control Panel and lowers my privileges, so that I can't function as an administrator on mom's puter. This upsets the rest of us. He says he has to have admin privileges to install and play his games, and, that I keep messing up his stuff.
I've tried creating an admin account and hiding it from the logon screen, and the User's Control Panel, but that also makes it so I can't logon, not even in safe mode. Seems MS made Win 7 so that if there is just one admin account activated it sees no need for any other admin accounts to display in Safe Mode. I tried the following, "Hide the Admin Account" hack, but Win 7 would not allow me to logon, since I found no way to activate a logon run dialog, nor could I use Safe Mode, cause with His admin account visible, my admin account isn't, not even in Safe Mode.I noticed a thread entitled: Hidden Administrator Account? on this forum, which led me to ask you about this. I'm a "slightly" above average user, so be gentle.I need something hidden from him, even in the User's Control Panel, so that I can maintain this puter and put a stop to his ability to lower my privileges. Any suggestions, other than lowered privileges?Instructions to Hide the Admin Account from the Default Login Screen:You can hide accounts the same way you did in XP, but in Vista and Win 7 you need to create those registry keys.
1.In regedit, navigate to: HKEY_LOCAL_MACHINESOFTWAREMicrosoftWindows NTCurrentVersionWinlogon.
2.Right click Winlogon and select New / Key.
3.Name the new key SpecialAccounts (case sensitive).
4.Right click The SpecialAccounts key and select New Key again.
5.Name the key UserList.
6.Click the UserList key and in the right side window right click and select New / DWord (32bit) Value.
7.Name the new DWord value with the same name as the account you wish to hide. Double click this value and in the Value Data line enter 0 (zero) to hide the account or 1 to show the account.
I can access my files throguh Ubuntu. Back at windows, my options are less limited. I can't view the hard disk at all in Explorer, although it shows in Disk Manager. I can't make any changes to it. Trying to assign letters to it through command prompt returns errors. EaseUS partition manager also doesn't allow me to do anything with the partition I need. Partition recoverer returns an error when targeting this hard drive. I need the highlighted partition to be accessible through windows as it had programs installed on it and it's gone ahead and messed everything up.
I think one of the culprits, if not the culprit is the partition type, linux swap 0x82. However, when I try and change it, I get
"Message did not receive a reply (timeout by message bus)"
i am web developer working in company, one of my colleague have made changes in my pc so that any usb drives not working in my pc it gives warning like
"F:/ is not accessible"
"Access is Denied"
i m already login as admin, tried installing drive again but not work.
I recently installed Windows 7 on two different hard drives in the same computer.When installing one I disconnected the other drive, and when the first one was installed, I disconnected the first drive and installed it on the other drive.
Now only the second Windows is loaded each time I turn on the computer and boot loader screen where you can choose the OS does not show up.What went wrong and is there any possibility to restore it?
why my folder is not accessible in windows 7
View 1 Replies View Relateddrive D is showing location is not available and access denied.
View 1 Replies View Relatedthe local disk d is delete
View 5 Replies View RelatedI'm trying to set up windows 7 so I can access it remotely from my iPad.Ive set up windows 7 to allow remote access. I've tried disabling avg and windows firewall but I still keep getting connection refused.
View 3 Replies View RelatedI am having an issue with a current update for Windows-7, my desktop became a default and i cannot load my old one. i found a solution that tells me i need to go to windowssystem32configsystemprofiledesktop and delete the default desktop and restart pc which should put everything back to normal.The problem is, is that my UAC administrator is shut down, i've tryed many ways to turn it off, but nothing allows me to, because anything that has anything to do with Administrator privilege it will only deny and block my actions, it is not a virus. on this website i found that solution, but how do i bypass Administrator privilege?Anything like a computer restore, anything that asks the administrator privilege Alot of things say : The Dependency Service or group failed to start when i click on System Restore.
Windows 7
AMD Phenom(tm) 2 x4 965 Processor, 3.4 GHz
14.0GB of ram
64-bit Operating system
[pc name] not accessible. You might not have permission to use this network resource. Contact the administrator of this server to find out if you have access permissions.The specified server cannot perform the requested operation.Lately we have had problems with all Windows XP pcs not being able to access all the shared folders on one Windows 7 pc on the lan.It is intermittent. I cannot think of what has changed recently.It is temporarily fixed by a reboot of the Win7 pc, but since it is a server in an office environment, this can be difficult to do middle of the day.Turning firewall software off on host and client has no effect.Network sharing profiles are never changed as issue comes and goes.Unsharing a folder, and resharing it has no effect.The Win7 pc does show up as a networked computer and all are in the same workgroup.All Windows 7 pcs on the lan can access the shared folders when all the XP pcs cannot.Another Win7 pc on the lan is nearly an identical hardware build with same firewall and never has a problem.
Network sharing options for current profile:
network discovery: on
file printer sharing: on
public folder sharing: on
media streaming: on
file sharing connections: 40-56 bit encryption
password protected sharing: off\
[code]....
For some unknown reason i have come to my computer and whenever i click on the C: My computer or any icon on my desktop or try and edit any file (delete etc) i get the pop up message C: is not accessible access is denied Location is not available.I thought this might have something to do with user accounts however I am the only user and administrator of the laptop and have all wrights, box's ticked.
View 3 Replies View RelatedWhen I booted up my laptop my desktop lost all its icons and a dialog box popped up saying:Location is not availableC:Users<Username>Desktop is not accessible.The directory name is invalid.I went to the C:Users<Username> directory and saw that my Desktop folder became a file...When I try to open the Desktop.. the open with dialog box came out. I tried creating a new folder with the same name (Desktop) and Windows says that a folder with the same name already exists.However when I right click on it and tried going to properties, then the Previous Versions tab.. I can actually recover my old files (1 week ago.. but I still need the current ones and of course use my desktop as well). How can I fix this T_T.
View 2 Replies View RelatedI began having BSOD's on my PC, after a significant amount of work, I made the decision to repair the files through Windows 7 with the option to retain my files and setting vs. a clean install. I subsequently realized that the problem that was likely causing the BSOD was an incorrectly seated video card (I currently have two GTX-295's).That being said, with the reinstall the original administrator's account is no longer accessible. I've got the folder on the C: drive where I'd hope to be able to reactivate it and therefore retain all the previously installed programs rather than having to reinstall everything.Any thoughts on how I might be able to get the current version of Windows 7 to "see" this User Account and as such avoid the reinstall of everything?
View 3 Replies View RelatedEvery time Microsoft updates Windows 7 it causes new problems on what's been a relatively stable Dell XPS8000. The latest update causes my DVD / CD drive (HL-DT-ST DVD+-RW GH50N ATA Device) to be inaccessible! By running System Restore I've brought it back from the 'bit-bucket', but I'd really like to update the OS without having the updates screw something up. Previous updates have caused printer problems; Mouse problems (both running on USB ports); etc.
View 4 Replies View RelatedI am running Windows 7 Pro (64). I have 2 hard drives installed. The (C) keeps my system and program files. A second 1GB hard drive is used for back-ups, pictures, music, etc. I checked and recked all permissions, and they are in order. There is only one user on the computer, Admin. I was able to access the drive up until a few weeks ago. I am able to scan the drive with Microsoft Security Essentials. I am able to access the drive while in safe mode, but for some reason I get this message while attempting to access it while in normal mode.
Location is not available
F: is not accessible
Access Denied
I've had a new problem on my 7077 installation.
Although my pc is running fine, when I try to click on my c drive, it says that it's not accessible.
There is therefore no information shown for it in terms of size, or or free space.
Even when logging in as an administrator, I cannot access it.
EDIT - I cannot even access my DVD drive, although I can access my D partition...
All was working fine until earlier this morning - and no, I haven't visited any 'dubious' sites recently, Any advice would be greatfully received!