Windows 7 Won't Start - Continuous Reboot Cycle
Dec 10, 2011
Here's the visual procedure my PC goes through after pressing the power button:
- POST screen
- Checking-for-bootable-drives screen
- Windows logo screen
- White text reading 'autochk not found - skipping autocheck' on an otherwise blank, black screen
- VERY brief flash of what looks like the same blue as a BSOD with very few words right at the top
- Automatic restart
- Back to the POST screen, etc, etc, etc...
I can still happily boot into the Windows 7 CD and GParted (they're the only bootable discs I have).If you will, please take the time to read my final post (the other posts may be useful aswell) on this thread, as it contains useful information on what caused the cycle (and what I have already tried) and has some screenshots (this thread is more of a continuation of the aformentioned one).
View 14 Replies
ADVERTISEMENT
Feb 19, 2012
I was having issues with my optical drive and foolishly followed the advice of Emachines tech support. I performed a system restore to original factory settings that was supposed to move my user files to cbackup. It all failed. My computer now gets stuck on "Windows is loading setup files" or something, and the. I get a dialogue box saying installation failed and would continue after restart.I have tried using a system recovery disc, and get the same issues. I have tried to get it to boot in safe mode, last known good, and get the same error and restart cycle. Memory tests show no issues and I am at my last wit because there were important documents and photos I can't ever get back. I do have a backup drive but it was a few hundred gigs too small, and so I couldn't backup everything I need
View 2 Replies
View Related
Nov 28, 2012
[URL]
I want to set up an SSD and move the OS over to it. When I initially tried I got the error message that guy had: 'windows can not be installed to this disk.' I've got an ASRock Z68 Extreme4 MB and Im trying to put in a SanDisk Extreme 120GB SSD (extreme enough for you?). I initially had my SSD plugged into a Marvell socket, same as the other guy, which is when I found that thread. I switched the Sata cables around so I had
SATA3_0: New SSD
SATA3_1: Old HDD
SATA2_2: TSSTcorp CDDVDW SH-222 ATAPI
SATA2_3: Not Detected
SATA2_4: Not Detected
SATA2_5: Not Detected
and then switched SATA mode to AHCI and enabled SMART. However, when I saved these changes and went back into a normal bootup, I got into a reboot cycle. I would get to the 'starting windows' screen and stay on it for 5 or 10 secs, then my computer would reboot. I tried tinkering around with some BIOS options, but I couldnt get anything to work. Eventually I unplugged my SSD and plugged my HDD into its original spot. I also went back to IDE and turned off SMART. Now it seems like everything works fine, but my SSD still isnt set up. How can I fix this?
Edit: After some more testing I found that having the SSD plugged into where the HDD used to be and plugging the HDD into a new spot was fine (this is the arrangement I wish to end up with). When I enable SMART it works fine too, but when I turn on AHCI I get into the reboot cycle. I also noticed that right before my computer reboots I get a blue screen for a split second - not enough time to read anything.
View 2 Replies
View Related
Nov 7, 2009
I up graded my lifebook to Windows 7 and have been blown away, so much so that I decided I would kill two birds with one stone with my old Toshiba.
It is an M40 Satellite with a 56GB HD, 1,66mhz processor and 1GB Ram,
I managed to clear enough space to install windows 7 (I have been unable too as it was configure to run on a server I no longer have)
The installation went well, or at least it looked as though it did, since the install and the last reboot in the installation proccess it has been in a continuous boot cycle, it comes back with a 'windows error' recovery.
I have tried starting it in every mode available and I still have nothing. I have tried a reinstall with both XP and Windows 7 and setting the Bios to boot from the DVD Rom.
I have eve gone as far as to get DBAN Nukem to clear the HD and still it will not recognise anything from the DVD Rom.
Have anyaone had a similar experience and can anyone shed any light? I am getting close to tossing it in the trash!.
View 1 Replies
View Related
Jul 20, 2011
I have just built a computer Win7, Intel corei5, 4G memory, and the computer just turns on then turns off. It doesnt even get to a screen to run settup.
View 1 Replies
View Related
May 10, 2012
I am running windows 7 ultimate x64 and have a quick question. I notice when my computer updates itself and goes for a restart, after the computer has rebooted all of the programs that were left open also restart. Is there a way to turn this feature off?Basically I'm looking for way to stop the opening of programs after a reboot, forced or not.
View 1 Replies
View Related
Sep 24, 2012
I plugged in a new hard drive planning to upgrade by cloning, then suddenly my computer restarts and it continuously cycles... I disabled the restart on automatic failure to see the bsod and it says: [code] I don't have the windows recovery disk.I can remove the hard drive and plug it into my laptop but I have no idea what to do from there..
View 7 Replies
View Related
Jan 22, 2012
So, I'm not exactly sure what I did. I was clearing up some space on my computer after using the Norton Removal Tool to get rid of this Norton trial popup that came up everytime I booted my computer. Now, after it told me to restart, it seems to be stuck in an endless boot cycle that resets itself after showing the Windows logo. I've since tried running startup repair, which freezes as it shows the progress bar for 'Windows is loading files'. Safe mode will not work, either. It just sends it back into the boot cycle. Not sure what to do at this point. My computer came pre-installed with Windows 7 Home Premium 64bit, so I don't have any startup discs.
View 3 Replies
View Related
Nov 7, 2012
I was instructed to remove my antivirus software and reinstall it by avast. They said to run their tool in safe mode. Try to start computer in safe mode and it gets just so far and reboots. I set MSConfig to boot as safemode/minimal. Do that and restart. Endlessly restarts - safe mode will not load, it just gets so far and then reboot.My computer will not start now at all. Can not get a command prompt, safe mode, and could not do a restore for some unknown reason.
View 4 Replies
View Related
Dec 15, 2011
I am new to Windows 7. On TV, the sales people always show 10 or 15 programs that are open on the taskbar and they use a key combination and then each of the programs scrolls one behind the other.
View 1 Replies
View Related
Oct 27, 2011
recently, in my Win 7 32 bit SP1, USB devices like keyboard and mouse are getting undetected and detected every now and then. Troubleshooting shows "hardware changes might not have been detected". All the drivers are up to date. Sometimes the computer showed that there was a power surge in the USB hub. I think the USB hub is losing power every now and then
View 3 Replies
View Related
May 12, 2012
My wife did something on her PC (she doesn't know exactly for sure what & can't explain it completely me), and now she can't boot up her PC. She says it had something to do with changing the security settings for a program she uses a lot so it wouldn't keep asking her if she wanted to launch it, and that's when it told her to restart the PC, then it wouldn't boot up anymore.When you reboot, the screen eventually goes to a black screen saying "Windows failed to start. A software or hardware error may be the cause" or something to that effect. It offers me the option to "Launch Startup Repair" or "Start Windows Normally".If I Launch Startup Repair, nothing much happens --- it says it's adding files, then it looks like Windows is about to boot up, then it goes to a black screen for a long time & nothing happens.
If I choose Start Windows Normally, it simply reboots & eventually brings me back to the same screen again.I've tried using rebooting and selecting ESC to get to the boot menu, then installing the Win 7 installation disc & selecting the DVD drive, then I select thelanguage, then I click Repair, but it sits there forever with nothing happening.I also tried an outside boot disc I found on the web & it doesn't launch.
View 9 Replies
View Related
Feb 22, 2013
When doing wipe and reloads of windows on customers computers one of the most time consuming things are doing all the windows updates. Is there a way to run windows updates non stop until it is finished with all the updates?
View 4 Replies
View Related
Jun 15, 2012
It's been a long time since I've been on this website, think it was over some Windows live junk, but chea. So I'm not really sure what is causing the issue, I was lead to believe my old SSD was giving out on me along with perhaps a mishap with an update to newer drivers of ATI 5xxx HD graphic cards. But alas after trying to do what i could, i eventually gave up noticing i was running low on SSD space from my 60GB and reinstalled onto a 120GB after getting fed up with the BSOD's on that. So, i moved onto the next, got it all up and running, but it seems something is wrong with it as well and i can't exactly pinpoint it and i've forgotten how to read memory dumps correctly so here I am again at this great community to fix this thing again( As for issues i've run into, seems like playing League of Legends will result in a BSOD here and there while in game, sometimes just browsing on firefox 13 here and there results in my computer starting to freeze up and going black with a rare glimpse of my desktop or things on it before going black again with the mouse unresponsive, etc.
View 1 Replies
View Related
Oct 27, 2012
I'm using Windows 7 Ultimate 64 bit.I use the desktop slideshow feature, directed to a folder in my pictures folder that I named desktop slideshow, I have about 1000 images in there, it's set to change image once every 30 seconds.Here is the problem, I tend to see the same 20 images or so go by over and over, and only once or twice in each loop does a new image show up, eventually I see a great number, but it tends to favor those same 20 or so images predominantly.They don't have similar names, they are widely differing in size, dimensions, and every other aspect. But for some reason the slideshow tends to pick them to go by more than anything else. I removed the images, and it chooses another 20 or 30 seemingly at random to give priority over the rest, only slipping in a random one between those repeated choices once or twice in each loop again.
So here is my question, does anyone know what criteria or method is used to cycle the images in the desktop slideshow? The whole reason I started using it was because I like the idea of seeing any one of a thousand or more pictures on my screen when I close a window, and it's kind of nice to have something I'm working on in my main screen while random art goes by on my second monitor, but with the same images repeated, it sort of loses the appeal.So far my only option has been to remove the over used images after a while and cycle in some of the old ones I removed before. But that's not really all that satisfying a solution.I searched around google, talked to some friends, and generally applied my brain to the issue for a few months without any breakthrough, and decided to seek some info from this forum since it seems to be fairly chocked full of people who have considerable knowledge of the concerned operating system, big surprise considering that is the point of the forum eh?
View 2 Replies
View Related
Nov 22, 2009
I am on an Acer Aspire M5100 desktop that came with Vista 32x preinstalled. I bought a ATI Radeon HD 4550 months ago that worked fine on Vista. I wanted to install Windows 7 64x Home Premium, so I bought a copy through Microsoft, created a boot disk, removed all non-original components (including graphics card), and did a clean install. I installed all my additional hardware and everything worked fine until my graphics card.
When I installed my graphics card, I downloaded the most up to date drivers (I got the link from this site), and rebooted. Upon reboot, my BIOS load, Windows starts to load, and then I get a blue screen. The blue screen flashes by so quick I can't read what they're saying. Then my computer restarts, and we start over again (blue screen cycle).
So I reconnected to the onboard gpu, and it started. Then I went into the Device manager, and uninstalled the old driver. Reinstalled my Radeon 4550, and current drivers, rebooted, nothing. Tried reinstalling windows 7, this time, removing old drivers first, than installing. Still nothing. This happens every time I enable the video card and then reboot.
I'm a noob so I've searched this site up and down. I've heard that maybe I need to update my BIOS. So I went to Acer.com to download the BIOs, and they don't have any listed for my PC.
With that said, I'm at my wits end. If anybody has any thoughts on what to do next, I truly appreciate it.
View 2 Replies
View Related
Sep 12, 2012
I am getting spinning blue circle next to cursor even though I am not using it it comes and goes most of the time even though I am not using cursor or action anything. I am using windows 7.
View 1 Replies
View Related
Apr 2, 2012
system spec:
Windows 7 x64 Ultimate
2 250gb Seagate Barracudas 7200 > Raid 0
AMD Athlon II X3 450 Rana 3.2GHz Socket AM3 95W
Asus M4A78LT-M Mobo
2 Crucial 2GB 240-Pin SDRAM DDR3 1600
1 2GB G. Skill 240 pin DDR3 Memory
Ok computer has been doing scandsks for the last week all of a sudden when starting up and now it splashes the boot screen and hangs on the black screen with a blinking cursor at the top left.
heres what i have done so far:
1-booted from windows cd and did STARTUP REPAIR, it found my windows installation and finished without no problems - PROBLEM STILL EXISTS
2-command propmpt and fixboot command unsuccessful since it stays on x: dir and i cant find the c: dir for the right commands
3-SYSTEM RESTORE found no earlier restore points which i found odd but it is what it is.. lol..
4- went ahead and tried installation of windows to see if it recognized my drive on array and it did with the correct size and data.
I tried installing the regrun reanimator to see if it maybe was a root kit problem but the boot up disk didnt recognize my c drive either.
View 4 Replies
View Related
May 11, 2011
Went through the recommendations for upgrading to windows 7 as per instructions on CD. Anything incompatible was removed, uninstalled prior to set-up. On first run through set-up failed, BUT, this was easily rolled back. Not so easy the second time round where there was no option to roll back. On rebooting I could not access any of the software programmes on the pc. Instead I was taken straight to the command screen:
X:$WINDOWS.~BTWindowssystem32>
The only access I have to all my directories is via this screen.I did attempt to a system restore but was asked to identify which system to restore and was unable to do that as I am not very technical.I can, by hitting F8 get to the advanced boot menu, but none of the options listed there function. When selected they take me back to the command screen. If I exit the command screen the pc reboots.Is there any way I can get to restore my previous o/s Vista and then hopefully I can get to do a clean install of windows 7? it currently looks like I am running two opeating systems and windows.
View 3 Replies
View Related
Dec 26, 2011
I just got a beautiful new laptop for Christmas (HP Pavilion g7 1260ca). Every time I start it up, it starts in "Windows Boot Manager" and makes me select Windows 7 as my operating system. That's annoying in it's self (why won't it just start on it's own! It's not like I'm running another operation system as well!) but what's even worse, as the text is appearing on the screen, a loud obnoxious beep sounds with each word that appears! I checked to make sure no keys are stuck, so it's not that. Once I choose Windows 7, I'm able to sign in with no problem.
View 3 Replies
View Related
Jun 13, 2012
I'm running on a Windows 7 32 bit system, self built. Before I go into explain all of the details, here are my computer specs..My computer has been crashing a lot recently. It never use to happen, it just started within the past month or so. It's not a BSOD, there's no error, no warning.. Just black. When I start up, it's like nothing ever happened. But it's really annoying, whenever I begin to render a video, it crashes almost every time. It also stopped a few times while I was trying to play games and record, but I have recorded in the past. My computer use to be at it's prime but I don't know what changed. I could really use some advice to fix this. Any suggestions would help, I'm really wanting to render up all the footage I have.I do a lot of video game recording on my PC, I use the program bandicam. Also, my PC doesn't seem to be suffering from overheating, as the hard drive stays cool when it crashes.I keep about 50gb free space open on my computer to avoid extra errors.
View 10 Replies
View Related
Feb 15, 2012
Everytime I start the computer in the normal way I get a bsod about 1-2 seconds after the desktop appears (after I log in) and the system crashes. When I then start the computer in the safe mode it does not instantly give me another bsod, but even in the safe mode I have gotten a bsod. I actually downloaded the exe file from the posting guide and while running that for the first time it actually crashed in safe mode again.
I'm running Windows 7 Home Premium 64bit.Its the original OS.It is not an OEM version I think.. I did not order this computer, it was done for me. I'm pretty sure its retail, but at the moment I can not ask this to the person who ordered the computer for me.The computer is tomorrow 1 week old. (yes I managed to crash it in a week)The OS was installed 7-8 days ago, I'm not sure of that but its more then 7 days and less then 14 days for sure. Can ask if its important, but again not at this moment?When trying to do the system health report as stated in the guide (perfmon /report), it gives me a viewer stating that the system cannot find the path.
View 5 Replies
View Related
Apr 30, 2012
If I restart my laptop, on the BIOS (i guess?),it will ask me to choose OS, which there's only 1 option (Windows 7).After that, the laptop will beep contionuously, short continuous beep to be exact.Nothing weird happens, except the beeps.And if I boot my laptop normally, it won't beep.From what I've searched, I assumed that it's RAM's problemBut, it will only beep if I restart the laptop.
View 5 Replies
View Related
Sep 19, 2011
i am getting lately often chkdsk launching on boot and also when i use it to check the situation on the reported partitions (at least two physical drives so far) it reports errors almost on every run even if sometimes they are like 10 minutes after the previous "scan and fix errors" .... Surface / sectors tests and WD diagnostics tool scan (all drives are WD) are coming up clean ...What's the deal here? Doesn't look like the drives need to be replaced right? one especially is like two weeks old
View 1 Replies
View Related
Apr 12, 2012
1. i had a problem with google that redirected me to advertisements whenever I searched.
2. i booted the computer into safe mode and ran malwarebytes and bitdefender to scan my computer and i just let the programs do their thing.
3. upon restarting my computer after the scan my laptop was stuck in a continuous loop.
4. i tried every setting after pressing f8 such as safe mode, safe mode with networking, etc. and everytime i can't get past the boot up.
5. finally i try "disable automatic restart on system failure" and then it leads me to the BSOD and it says
STOP: c0000135 The program can't start because %hs is missing from your computer. Try reinstalling the program to fix this problem I saw several posts about this but a few of the answers scared me by saying something to the effect of "this will only work with this user, don't try it with your computer" Just to reiterate i can't even get into safe mode and so have no clue how i'm going to follow your procedures. i also misplaced all discs that my laptop came with edit. I have a Dell Inspiron N5010?
View 7 Replies
View Related
Jul 1, 2012
I should note I have been here before and posted about BSODs I was having. Unfortunately, at the time something came up and I never got around to coming back. By now, however, the problem has gotten worse. Before, it only crashed when I was playing graphic-heavy games. Now it crashes at completely random times as well, including when the computer is supposed to be idle.
The three errors I most commonly see are something among the lines of:
A clock interval was not received on a secondary processor within the allocated time interval
System_Service_Exception
Page fault in nonpage area (win32k.sys)
A little background info:
My version of windows 7 is 64 bit and came pre-installed on the PC, but it was a custom-built model, so I got the disc along with it. I purchased the PC about 6 months ago.
I ran Memtest without any issues.
I ran Driver Verifier for a hell of a long time before my computer finally crashed again in the past. The Dump file would have been created around 28-02. Problem is, I've tried running the verifier again since and my computer won't start when it's on now.
View 9 Replies
View Related
Jan 4, 2011
I need help regarding my PC. I've been getting continuous long beeping sounds lately. It seems to happen everytime I press multiple keys in my keyboard at the same time, which of course is unavoidable when you're playing games. Now everytime it happens, my keyboard wouldn't work properly, or sometimes it wouldn't work at all. Unplugging the keyboard doesn't stop the beeping, but it goes back to normal everytime the beeping stops. And I also noticed that my speaker produces low rumbling sounds everytime it happens.
View 9 Replies
View Related
May 15, 2011
All of a sudden, my sis's laptop got into a loop of continously detecting a Power Saving USB. The "sound" of detecting something being plugged into the laptop keeps ringing.
I checked under Devices and Printers and there's a Power Saving USB icon which keeps flashing on and off.
View 3 Replies
View Related
Mar 16, 2011
Basically, every time i plug a USB device into my pc, be it mouse, keyboard, HDD or memory stick, the computer makes the normal 'dun dun' sound, but it then continues to make a 'dudududun' noise, occasionally continuous every 10 seconds or so.Is there a problem with the mobo, USB port, drivers or a combination of all 3. Should this be an issue i should wory about or not?
View 2 Replies
View Related
Dec 8, 2011
My computer will randomly reset itself and reboot from DOS and back to windows again. These intervals would range from 5 mins from startup to 3 hours or more so they are completely random. This has been happening for 1 year now. Recently the intervals have been getting shorter and shorter to the point where my computer will reset upon 2-5 min of start up after hitting windows guaranteed. I get no error messages or indications that it is about to happen. Normally I'd jump on the overheating bandwagon but the strange thing is, my computer does not reset ever if I am playing a graphics intensive Video Game (battlefield 3 to name one).
It only resets if I'm not really doing anything intensive such as word processing or browsing the web or watching a movie. All these simple tasks will cause my computer to reset after a random time period. Anything where my CPU/GPU churns into motion prevents these resets. This I cannot explain. A problem which also happens (and I feel might be related to cause this) is that if I ever shutdown my computer, it will not boot (windows cannot load). And I have to system restore to get my computer to run again. So I have never hit the shutdown button in a long time.
View 1 Replies
View Related
Aug 11, 2011
This is a annoying loud continuous beeping sound. This happens after the boot diagnostics, at the point where windows should boot up. There is a cursor in the upper right corner, and that is all it does.This is a HP Pavilion Elite m9040n PC. It came with Windows Vista, and I am upgrading to Windows 7. I stupidly didn't run upgrade advisor, and am now regretting it.When I go to HP to find drivers, no Windows 7 drivers show up for this PC. Stupidly, again, I assumed this meant that they were packaged in with Windows 7.I don't think this is a hardware issue. It happens repeatedly at boot up, but when I put the installation CD in, the PC boots off the CD just fine. This probably doesn't eliminate any hard drive issues, but the PC wasn't showing any signs before, and the installation goes through without a hitch. Is this caused by not having compatible drivers? Are there computers that can't be upgraded? I do meet the minimum requirements. 2.4 Ghz, 3 GB Ram. What may I be missing?
View 4 Replies
View Related
