All of a sudden, my sis's laptop got into a loop of continously detecting a Power Saving USB. The "sound" of detecting something being plugged into the laptop keeps ringing.
I checked under Devices and Printers and there's a Power Saving USB icon which keeps flashing on and off.
My computer will not go into sleep mode, turn off the hard disk, or even go to a screen saver. I manually put it to sleep and it ethier wakes right back up or it waits 5 minutes and comes right back on. I dont have any programs running that should affect it sleeping. I went into the bios and made sure all the wake-up-on settings were off. I tried different power options and settings, and nothing is working. I never had an issue before, the change being that I have a new motherboard and reinstalled windows 7 on a SSD
View 6 Replies View RelatedPc is in power saving mode when i turn computer on and than goes to black screen
View 1 Replies View RelatedI recently set up an Acer aspire running Win7 Pro. Went fine. Left machine on overnight and in morning, video was dark and nothing I tired restored it, including reboot. It is as if it got "stuck" in a power saving mode and wont come out of itMonitor works fine with other machine
View 2 Replies View RelatedI'm getting Eco conscious in my old age. My laptop is usually on all day and I think it would be a better idea if I could use sleep mode or something to save power. Problem is I need to know if emails are arriving. Is it possible to set the computer up in such a way that it wakes up when an email arrives, or would sleep mode stop emails arriving in the first place? Using Live Mail by the way.
View 9 Replies View RelatedI left my computer running overnight as I usually do. When I went back to it this morning, it was stuck in power saving mode. When I rebooted, everything looked fine and the windows logo loaded but when I reached the login screen it went directly to Power Saving mode and got stuck there.
I am posting this from Safe Mode with Networking.
What could be causing the following situation- When restarting my computer (Windows 7 64bit) after the "starting windows" screen appears the screen will go dark and display "power saving mode". After about 60 seconds the computer will restart from the "starting windows" screen and complete the restart process. Once it completes everything the computer runs fine.
View 1 Replies View RelatedI have a new problem. My monitor has begun to blink repeatedly after coming out of power saving mode (when the screen turns off automatically due to inactivity).
I have no problems with this in that past. This problem just started out of the blue a few days ago. Initially, it would just blink once or twice coming out of power saving mode, now it might blink 10 or more times before the monitor stays on. Once the monitor is on, it functions fine. The blinking only occurs after coming out of power saving mode.
I have a HP PC and I'm trying to use HP recovery plus to install Windows 7. It consists of 3 discs and the thing is, that I insert the first one in the optical drive, restart computer, press F11 to enter the recovery menu or whatever. Then it loads Windows files, then the HP recovery itself starts. The problem is, that when I enter the recovery menu, the computer will go to power saving mode after a while, no matter what. I tried pressing some random keys to get it back up, but it just doesn't work.
View 4 Replies View RelatedThe monitor seems to go into power saving mode when entering/exiting a game such as a game in steam. (But it doesn't happen every time) the only way to get it out is hard restart. Yes I've tried other monitors, as well as display drivers, and there also seems to be nothing wrong in the Bios.
System Information:
Time of this report: 3/22/2010, 17:52:48
Machine name: NATEANDHARRY-PC
Operating System: Windows 7 Ultimate 64-bit (6.1, Build 7600) (7600.win7_rtm.090713-1255)
Language: English (Regional Setting: English)
System Manufacturer: HP-Pavilion
System Model: NC695AA-ABA m9515y
[Code] .....
I recently called Dell Support and they used Dell Connect to try to fix it. Yesterday, I got home and my screen was blank. So I turned the computer on and logged in. Within seconds it did the Power Saving Mode thing. Then I let it go until today. Now I can get on the internet but when I run games that I play, it still does it.
View 7 Replies View RelatedI open a file sent to me in email, click enable editing, work on it for three hours, hitting save all the while, then go to email it back and the file is gone. It isn't in my documents where I saved it, and it isn't under recent files. I am sure you can relate to the feeling of losing something you have worked hard on and I feel
View 3 Replies View RelatedI'm running on a Windows 7 32 bit system, self built. Before I go into explain all of the details, here are my computer specs..My computer has been crashing a lot recently. It never use to happen, it just started within the past month or so. It's not a BSOD, there's no error, no warning.. Just black. When I start up, it's like nothing ever happened. But it's really annoying, whenever I begin to render a video, it crashes almost every time. It also stopped a few times while I was trying to play games and record, but I have recorded in the past. My computer use to be at it's prime but I don't know what changed. I could really use some advice to fix this. Any suggestions would help, I'm really wanting to render up all the footage I have.I do a lot of video game recording on my PC, I use the program bandicam. Also, my PC doesn't seem to be suffering from overheating, as the hard drive stays cool when it crashes.I keep about 50gb free space open on my computer to avoid extra errors.
View 10 Replies View RelatedI am running Windows 7 Ultimate on HP Pavilion DV2000 laptop.I found that some DVD's won't play on the machine. In My Computer folder, the F: drive does not change even if I insert a DVD. There is no issue about playing CDs and some DVDs. I found that the DVDs which refuse to get detected are mostly commercial DVDs.Is it an issue about DVD region?The drive is 'hl-dt-st dvdram gsa-t20l ata' and it was by default coded to Region 2 (though I live in Region 5 - India). I tried to change the region but I was not successful. I then installed region killer and now the default region is region 5. However, even this has failed to detect the DVD.
View 4 Replies View RelatedEverytime I start the computer in the normal way I get a bsod about 1-2 seconds after the desktop appears (after I log in) and the system crashes. When I then start the computer in the safe mode it does not instantly give me another bsod, but even in the safe mode I have gotten a bsod. I actually downloaded the exe file from the posting guide and while running that for the first time it actually crashed in safe mode again.
I'm running Windows 7 Home Premium 64bit.Its the original OS.It is not an OEM version I think.. I did not order this computer, it was done for me. I'm pretty sure its retail, but at the moment I can not ask this to the person who ordered the computer for me.The computer is tomorrow 1 week old. (yes I managed to crash it in a week)The OS was installed 7-8 days ago, I'm not sure of that but its more then 7 days and less then 14 days for sure. Can ask if its important, but again not at this moment?When trying to do the system health report as stated in the guide (perfmon /report), it gives me a viewer stating that the system cannot find the path.
If I restart my laptop, on the BIOS (i guess?),it will ask me to choose OS, which there's only 1 option (Windows 7).After that, the laptop will beep contionuously, short continuous beep to be exact.Nothing weird happens, except the beeps.And if I boot my laptop normally, it won't beep.From what I've searched, I assumed that it's RAM's problemBut, it will only beep if I restart the laptop.
View 5 Replies View RelatedI up graded my lifebook to Windows 7 and have been blown away, so much so that I decided I would kill two birds with one stone with my old Toshiba.
It is an M40 Satellite with a 56GB HD, 1,66mhz processor and 1GB Ram,
I managed to clear enough space to install windows 7 (I have been unable too as it was configure to run on a server I no longer have)
The installation went well, or at least it looked as though it did, since the install and the last reboot in the installation proccess it has been in a continuous boot cycle, it comes back with a 'windows error' recovery.
I have tried starting it in every mode available and I still have nothing. I have tried a reinstall with both XP and Windows 7 and setting the Bios to boot from the DVD Rom.
I have eve gone as far as to get DBAN Nukem to clear the HD and still it will not recognise anything from the DVD Rom.
Have anyaone had a similar experience and can anyone shed any light? I am getting close to tossing it in the trash!.
i am getting lately often chkdsk launching on boot and also when i use it to check the situation on the reported partitions (at least two physical drives so far) it reports errors almost on every run even if sometimes they are like 10 minutes after the previous "scan and fix errors" .... Surface / sectors tests and WD diagnostics tool scan (all drives are WD) are coming up clean ...What's the deal here? Doesn't look like the drives need to be replaced right? one especially is like two weeks old
View 1 Replies View RelatedI installed 7 with two monitors hooked up and turned on and it detected both of them just fine. But after the install when I boot to windows if both monitors aren't "on" when I boot it won't detect the second monitor when I turn it on. I have to boot with both monitors on for it to detect both of them.
I just want to see if anyone else has experienced this same problem?
i have connected my monitors via displayport to my computer. displayport is very nice, but it has one feature that is - in combination with windows vista/7 - very bad. displayport specification says that if a device (Monitor) will be turned off (standby) it will not be visible to the computer anymore. that is very annoying because windows has a routine which permanently checks if all monitors are still connected. if one monitor will be physicly disconnected, then windows will reorganize the desktop (all content that was on the disconnected screen will be moved to the others). if the monitor will be turned on again windows will move the windows back to the place where it has been before, but often it does not work correctly.
View 2 Replies View RelatedThing is, that applications know your hardware somehow from somewhere.You get something like this in some games.Your CPU: C2Q6600 ~ 2.4GhzRAM: 2GBGPU: NV 6600Is there a way to block or alter this for applications? Either for worse or better? want to change this detection mechanism that reports your current hardware configuration to aplication.
View 20 Replies View Relatedi am using external western digital hard disk, i am unable see it on my desktop. but it's showing in disk management. please assist on the below issue a lot of important data in that harddisk.
View 2 Replies View Related1. i had a problem with google that redirected me to advertisements whenever I searched.
2. i booted the computer into safe mode and ran malwarebytes and bitdefender to scan my computer and i just let the programs do their thing.
3. upon restarting my computer after the scan my laptop was stuck in a continuous loop.
4. i tried every setting after pressing f8 such as safe mode, safe mode with networking, etc. and everytime i can't get past the boot up.
5. finally i try "disable automatic restart on system failure" and then it leads me to the BSOD and it says
STOP: c0000135 The program can't start because %hs is missing from your computer. Try reinstalling the program to fix this problem I saw several posts about this but a few of the answers scared me by saying something to the effect of "this will only work with this user, don't try it with your computer" Just to reiterate i can't even get into safe mode and so have no clue how i'm going to follow your procedures. i also misplaced all discs that my laptop came with edit. I have a Dell Inspiron N5010?
When doing wipe and reloads of windows on customers computers one of the most time consuming things are doing all the windows updates. Is there a way to run windows updates non stop until it is finished with all the updates?
View 4 Replies View RelatedIt's been a long time since I've been on this website, think it was over some Windows live junk, but chea. So I'm not really sure what is causing the issue, I was lead to believe my old SSD was giving out on me along with perhaps a mishap with an update to newer drivers of ATI 5xxx HD graphic cards. But alas after trying to do what i could, i eventually gave up noticing i was running low on SSD space from my 60GB and reinstalled onto a 120GB after getting fed up with the BSOD's on that. So, i moved onto the next, got it all up and running, but it seems something is wrong with it as well and i can't exactly pinpoint it and i've forgotten how to read memory dumps correctly so here I am again at this great community to fix this thing again( As for issues i've run into, seems like playing League of Legends will result in a BSOD here and there while in game, sometimes just browsing on firefox 13 here and there results in my computer starting to freeze up and going black with a rare glimpse of my desktop or things on it before going black again with the mouse unresponsive, etc.
View 1 Replies View RelatedI should note I have been here before and posted about BSODs I was having. Unfortunately, at the time something came up and I never got around to coming back. By now, however, the problem has gotten worse. Before, it only crashed when I was playing graphic-heavy games. Now it crashes at completely random times as well, including when the computer is supposed to be idle.
The three errors I most commonly see are something among the lines of:
A clock interval was not received on a secondary processor within the allocated time interval
System_Service_Exception
Page fault in nonpage area (win32k.sys)
A little background info:
My version of windows 7 is 64 bit and came pre-installed on the PC, but it was a custom-built model, so I got the disc along with it. I purchased the PC about 6 months ago.
I ran Memtest without any issues.
I ran Driver Verifier for a hell of a long time before my computer finally crashed again in the past. The Dump file would have been created around 28-02. Problem is, I've tried running the verifier again since and my computer won't start when it's on now.
I need help regarding my PC. I've been getting continuous long beeping sounds lately. It seems to happen everytime I press multiple keys in my keyboard at the same time, which of course is unavoidable when you're playing games. Now everytime it happens, my keyboard wouldn't work properly, or sometimes it wouldn't work at all. Unplugging the keyboard doesn't stop the beeping, but it goes back to normal everytime the beeping stops. And I also noticed that my speaker produces low rumbling sounds everytime it happens.
View 9 Replies View RelatedBasically, every time i plug a USB device into my pc, be it mouse, keyboard, HDD or memory stick, the computer makes the normal 'dun dun' sound, but it then continues to make a 'dudududun' noise, occasionally continuous every 10 seconds or so.Is there a problem with the mobo, USB port, drivers or a combination of all 3. Should this be an issue i should wory about or not?
View 2 Replies View Relatednow I get this message: interactive services detection for ntvdm.exeI searched through Microsoft answers and it recommended that I can stop it from services window,so I did that and now the message doesn't pop up(should I stop it?is gonna make problems because I stopped it?)but I know there is a problem because it began to happen after my update and I didn't get the message before the update.(I have my driver back ups before the update should I restore them?)
View 1 Replies View RelatedI am using HCL ME 74 series laptop with win 7 OS 32 bit. recently my OS crashed and I reinstalled the OS. surprisingly there are no netwrok controllers in my device anager. the network adpters give by HCL have been used. But the system is detecting the wifi networks all around but not connecting. The HCL ME series gives some funny buttons to press: set wifi enable -> Fn+F11, and bluetooth -> fn+F12 . both are enables.
View 4 Replies View RelatedI've been testing AVAST 4.2 fairly rigorously on both VISTA X-64 and Windows 7 7100 X-64.
Straight from the MS site I downloaded the .VHD Virtual disks (XP compatability mode)
AVAST reports that the .VHD file contains a "COMPRESSION BOMB". Now this doesn't actually tell me what this is -- but the fact that it reports something with the word BOMB in it means it can't be good.
Now as this VHD file was downloaded from the official Microsoft site I assume it HAS to be OK (or does it - I would imagine MS regularly checks its own websites - there's plenty of people out there who'd jump at a chance of attacking a MS site if they could).
I'm going to download the XP comparability mode again and have another scan.
VISTA again reports the file as CLEAN) so I think there still might be a couple of things AVAST need to fix in Windows 7 when reading compressed or "archive" type files.