Windows 7 - Using Both 32-bit And 64-bit Disks?
Sep 29, 2011I purchased a upgrade version of Windows 7 with both 32 bit and 64 bit disks. I have two computers; one 64 bit and one 32 bit - can I use both disks?
View 5 Replies
ADVERTISEMENT
How To Run Windows 7 Recovery Disks
Jan 1, 2012i got a windows 7 2012 virus by downloading a picture so i wanted to use my homemade recovery disks that i made when i first purchased the laptop and i dont know how to use it. i pressed f2 to go to boot options but cds wasnt listed, also when i restarted the laptop with the cds inside it doesnt prompt me to do anything, it justs boots normally. how do i use these disks?!
View 5 Replies View RelatedHP Windows 7 Recovery Disks?
Jun 22, 2012Is there a repair with these disks? I am getting a BOOTMGR missing but I checked the hard drive and it is fine. I do not want to lose anything because I have a lot on it.I cloned my image about 5 days ago and I may go that route, however, I have done things since then and don't want to lose the data. Before I load the HP Recovery disks (4 of them, and I had to order them for free except pay for shipping), is there a repair option?
View 4 Replies View RelatedWindows 7 Across Two Disks - Can Recombine
Oct 30, 2011I was given a Pavilion DV9000z by my sister who had purchased a replacement for herself. She wiped the two installed hard drives and clean installed windows 7. It appears that there is a 100MB systemm reserved partiion on one disk (total size 320GB, the rest of which was unpartitioned when I got it), and the operating system was loaded on the second disk (120 GB).I had a dead Vista laptop which had a 100GB SATA drive. I wanted to reformat it to have as a sppare. If I pull either one of the original drives out it won't boot. If I take out the 320 GB drive (with the 100MB partition) the laptop either goes black screen (if I move the 120 GB drive into the primary bay) or tries to boot Vista (if I put the scavanged hard drive in the primary bay), or tells me operating system files are lost (if I pull the 120 GB drive and replace it with the scavanged drive).So it appears to me that the 100MB partition on the 320 GB drive is waht the system is booting from, but that it won't load Windows 7 unless the second drive is also there.Is there any way to move the system reserved partition to the 120 GB drive? Or the operating system files to the 320 GB drive? It scares me that if either drive dies, the system won't boot.
View 12 Replies View RelatedWindows 7 Always Wants To Format BD-R Disks
May 12, 2012Almost every Windows application that tries to deal with my new Blu-Ray drive via a Windows dialogue insists on trying to format the BD-R disk first.
You can't format a BD-R disk, it's write-once and formatting would effectively destroy the disk, at $4 a pop.
BD-R disks don't need formatting, those applications that can handle them properly and independently do just fine without formatting.
If I tell it "no, don't format the thing", then Windows insists there's no disk in the drive.
How can I tell Windows 7/64 SP1 to quit trying to format BD-R disks, and recognize them correctly?
Why Wont Disks Run Windows 7
Aug 24, 2011Iv'e put a game in the machine to install and it comes up with the autorun option and i select to run installer.exe and then the comp just does nothing. just sits there as if i havent entered any commands whatsoever. what can i do?
View 4 Replies View Related'Windows Could Not Retrieve Information About Disks'
Jul 31, 2010I saw thread on similar problem and mentioned I need to make sure services.msc -> Virtual Disk Service (VDS) to automatic and started. I made this change and click the install again. The same message shown again.After message the VDS will stopped. I can restart and try install again. no luck.I also try sfc/scannow and no luck.My laptop is HP dv2000.
View 2 Replies View RelatedWindows 7 Separate Disks / Same Machine?
Sep 13, 2010My computer has two 1GB HDDs.Disk C: is the boot disk and is running Windows 7 64 bit upgraded from Vista 64.Can I use the same Win 7 disk (and key) to install to Drive E: as a clean install? I think the new installation would pickup a dual boot system and give me the option as to which I wanted to use.I understand that I can't use the same disk for two different machines.But can I use it for two installations on the same machine?
View 4 Replies View RelatedRestoring Windows 7 On A Used Computer Without Disks?
Sep 19, 2011So, I recently bought a used computer from CL. The machine is a Dell Laptop that originally had Windows Vista installed on it. The original owner upgraded to Windows 7 Enterprise and had a bunch of new software installed on the machine. (FL Studio, Photoshop, etc.)I was able to use the computer successfully for the first day until I installed iTunes. Something went wrong, and now when I boot up in normal mode Windows will freeze as soon as i try to open anything. I can open the Start menu, but anything past that will cause a freeze. The computer works fine in all Safe ModesSo, what I would like to do is restore Windows 7 to it's original configurations and still be able to keep all those great programs already installed. However, I do not any of the Windows 7 media that was used for the upgrade. What can I do? Will creating a system image work, or will I end up just copying the freeze problem if I do that?
View 3 Replies View RelatedLimit Windows 7 Ram (and Still Use The Extra As Ram Disks Etc)
Oct 17, 2012Can you limit the amount of ram windows is allowed to use?
Example I want windows to use 10gb of my ram and I am planing on using the other 22GB as a ram disk
How Many Uses Do Windows 7 And Ms Office Installers/disks Have
Jul 9, 2011I am looking at reformatting my computer, the only thing holding me back is a matter of software. I have a windows 7 professional 64-bit disk which came under the OEM licence, and I purchased Microsoft office 2010 on-line (I have an installer and a disk I had shipped to me). Would reformatting my computer and reinstalling windows require me to use one of my uses of either of the mentioned pieces of software? And where could I find how many uses I have (if it is indeed limited).
View 9 Replies View RelatedRe-Installing Windows 7 With No Recovery Disks?
Mar 2, 2011My rather new Acer Predator G has been acting up lately. I tried a restore point but this doesn't seem to help. As a last resort I was going to format the disk and re-install 7, however Acer never sent me recovery disks and I don't have 7 disks (Came pre-loaded). So my question is, if I can find someone with windows 7 disks can I use them + The CD key that's on the label of my desktop? Or do I need specific ones? Acer will send me recovery disks for 20$ but If I can pull this off for cheaper, I'd like to.
View 3 Replies View RelatedWindows 7 Install On EFI System And GPI Disks
May 16, 2011I've installed Win7 on a 500GB Sata II disk and was running fine. Then something happened, boot manager missing, and I need to re-install Win7 on same disk. Now I get a message, when installing on the SAME DISK: "Windows cannot be installed to this disk. The selected disk has an MBR partition table. On EFI systems, Windows can only be installed to GPT disks."
This disk just had Win7 installed on it and is still there (but boot manager is still missing) so how can the disk have an MBR partition? I got this same msg. when trying to install Win7 on a clean Samsung 128GB SSD as well. I re-formatted the drive and still same msg. How can I make my disk formatted with GPT partitions instead of MBR partitions? I can find no choices in terms of which kind of formatting and partitions that can be used when formatting disks on Win7 or XP Pro.
Restore Disks To Install Windows?
Aug 26, 2011I am going to build a gaming rig in the future when i have the money to, but windows 7 install disks are very expencive, but i already have a laptop with windows 7 AND all my programs. it constantly prompts me to make restore disks (then when i click yes without haveing a dvd in the tray it still starts the proses for some reason) so, if i got it to function properly and i made my 2 restore disks (it said it would take 2 disks for complete burn) could i use them to instal windows and my programs onto the new computer? would save me 130 or so dollars (if i could get it to work right) so it would be great if someone could confirm this.
View 13 Replies View RelatedDowngrade Windows 7 To Vista Using Restore Disks?
Oct 3, 2012If a pc was upgraded to Windows 7 from Vista, and we want downgrade Win7 back to Vista, can we use the original Recovery disks (from the Vista OS) to do this? I know Windows 7 is a better OS, but this is due to software incompatibility issues.
View 2 Replies View RelatedWindows 7 Backup Tries To Format Blank Disks
Oct 12, 2011When trying to backup to removable media ( CD or DVD ) Windows tries to format blank disks. I believe this will not work, look at the following link. Windows Backup does not back up to CD-R, CD-RW, or DVD-R devices It would appear this type of medium is not supported.
View 1 Replies View RelatedDvd Drive Won't Read Any Disks Running Windows 7
Oct 27, 2011my dvd drive wont read any disks, im running windows 7 64 bit, i have tried the options below but still no luck i have had a search on here and tried this to fix it:
- execute regedit
- search the key HKEY_LOCAL_MACHINESYSTEMCurrentControlSetControlClass{4D36E965-E325-11CE-BFC1-08002BE10318}
- delete Upperfilter and lowerfilter entries.
- Reboot your system.
there was no upper-filter or lower filters to delete, i have also had a look in properties and it says the dvd drive is working fine,iv tried to uninstall it and restart still have the same problem?
Windows 7 Install On XP Formatted Both Disks In Machine
May 3, 2011On Friday I attempted to install windows 7 ultimate x64 My existing machine is a XP Pro SP3 machine and it meets the system requirements as per Windows 7 upgrade advisor I booted from DVD and followed the steps up to selecting where to installl windows 7
This list showed me
Disk 0 Partition 1
Disk 1 Partition 1
Disk 1 Partition 2
Disk 0 is my C drive where my windows xp is installed - 300GB disk Disk 1 is where is store my files: pictures, music, documents etc - 500GB disk Partition 2 of Disk 1 is unallocated 9GB I selected Disk 0 Partition 1 Then selected Disk Options Format Drive Clicked Ok to the message about destroying data And allowed the install to proceed What i intended / expected to happen was that windows 7 ultimate would be installed on drive C: (Disk 0) and that drive D: (Disk 1) would remain intact and untouched by the process The Windows 7 install completed successfully I logged on to my user account, activated my windows 7 copy I then looked at my disks and what i see is that: Drive C was formatted and windows 7 was installed there BUT The install process formatted drive D and copied the windows XP installation to that drive So i have lost a lot of data that i did not expect to, and, of course, had not backed up in ages. For now, anyway, thats beside the point.I then removed the windows 7 DVD from the drive and rebooted the PC When the disk was removed the machine booted to Windows XP - running from the copy taken earlier on Drive D However, when i replaced the DVD to try to boot to windows 7 again, it began the installation process from the start?I dont remember selecting a dual boot option during the initial install, but maybe the steps i took led me to something like that by some default?
Windows 7 Not Installing Properly From OEM Recovery Disks
Oct 17, 2012I have a 2 year old Gateway laptop (NV5929u) i5 430M w/ 4GB. It came with Windows 7 Home Premium 64-bit installed. The computer crashed with a blue screen a few months ago, and I could not locate the recovery disks, so I ordered a set from Gateway (1 System disk, 2 Recovery disks, 1 Language disk). My attempts at recovery were unsuccessful and I got the msg: failure disk 0 partition 3. I replaced the HD with a brand new one yesterday. My attempts at recovery went a bit further, to the point that the computer loads the information on the various disks, but when it tries to restart.
View 1 Replies View RelatedSetup Windows 7 To Turn Off The Hard-Disks?
Aug 20, 2011How can I setup Windows 7 to turn off the Hard-Disks (after an idle time), but keep the boot Hard-Disk On?
View 3 Replies View RelatedWindows 7 Ultimate Upgrade With Both 32 And 64bit Disks?
May 14, 2012Windows Vista 32bit Ultimate disk (not sure if it even came with a 64bit disk).Windows 7 Ultimate Upgrade with both 32 and 64bit disks (allows for upgrade from Vista).Where I want to end up is having windows 7 Ultimate 64bit installed.of how I can do this with the disks I have, or what the cheapest way
View 5 Replies View RelatedUsing Toshiba Recovery Disks To Install Windows 7 Onto Another PC?
Aug 29, 2012I have the original recovery disks I made when I first got my laptop and am wondering if I could use them to install windows 7 onto my desktop?A few details if needed...laptop - toshiba satellite p755d 4 months[CODE]
View 7 Replies View RelatedWindows 7 HP Pavilion DV6 - How To Get Recovery Disks To Work
Nov 19, 2012I have a HP pavilion DV6 windows 7 that came with back up discs and I cannot get them to work! How do I do this?
View 2 Replies View RelatedToshiba Satellite Recovery Disks In Windows 7
Nov 21, 2012I had to replace the hard drive. Have no recovery or windows disks. What do I need and where can I get it??
Dvd Rw Doesn't Recognize All Disks Since Update To Windows 7?
Dec 22, 2012looking for dvd rw driver for my dell optiplex 330;hl-dt-st dvd=_rw gsa-h73n ata device. not reading all cd/dvds since upgrade to windows 7
View 1 Replies View RelatedInstalling Windows 7 Delete Files From My Other Hard Disks
Aug 13, 2010i'm going to go from 32 bit vista to 64 bit windows 7 and i want to know if files from my other hard disk that i use which doesn't contain any windows files or anything like that will be wiped when i'm installing it. also will it delete all of my files on the original C hard disk?
View 3 Replies View RelatedHow To Stop Windows Explorer Closing For Removable Disks
Mar 5, 2011I have autoplay completely disabled. I realize that Windows Explorer (WE) will open if a new dvd, usb drive, etc is connected/inserted.
But 'I open' all of the WE windows I use but "Windows 7 64 will close that WE window if the thing is removed, even when it did NOT create/open it"!
how to disable this 'automatic' CLOSING of WE by Win 7?
Dell Bios Doesn't See IDE Hard Disks But Windows 7 Does?
Dec 7, 2011I have Windows 7 Ultimate installed on a Dell Optiplex GX620 P4 hyperthread, approx 6 years old. Bios is most current Phoenix ROM Bios Plus 1.10 A11. I have 2 sata drives and 2 IDE drives installed. Boot is from SATA 0. SATA drives 2&3 are not present. All is well with this part of the equation.I had been running a Seagate 250GB IDE drive (ST3250824A) as BIOS drive 4, master drive, jumper selected. I just installed a second 120gb Seagate IDE (ST3120026A) as a slave, BIOS drive 5. That was when things got interesting. When I rebooted BIOS took a long time to load, and then reported that neither IDE drive was present. I then did all the obvious things: Disconnected one drive at a time - BIOS would recognize the connected drive. Switched master & slave drive positions. Changed jumpering from master/slave to cable select. Installed a new ribbon cable. Checked that BIOS drive recognition was set to 'Auto' for both drives. Results are always the same: either drive is recognized when only one is connected but BIOS does not recognize them when both are installed. On boot I receive a warning that IDE Drives 4 & 5 are not present and have to press F1 to continue. When I enter Setup BIOS reports the drives as unknown drive type. When only one is connected BIOS accurately reports the drive model # & capacity.After going through all this,I decided to bring WIn 7 up and see what would happen. To my surprise, Windows 7 showed both drives and worked fine. Device Manager properly reported drive model & capacity. I have used the system in this configuration for several days and everything has worked fine.This is not a problem, per se, since other than slow booting and having to press F1 every time I boot to bypass the BIOS "error" notice the system works fine but I am curious if anyone else has had this problem, and if they found a solution. I have considered forcing a reinstall of the BIOS but since it isn't really broken I don't want to try to fix it and make things worse. I googled this problem before coming here and could not find anyone with an identical situation on any tech site. Can I be the only one who's ever had this happen?
View 3 Replies View RelatedReinstalling Windows 7 On A System With Dynamic Disks With No Install DVD?
Jan 15, 2011I have a custom built HTPC running Windows7 Home Premium 64 bit that I bought from a tin-pot PC building firm last year. It has 4 physical drives in it. The first is configured as a "basic disk" with a single C: drive partition on which windows 7 is installed. The other three are configured as a RAID1 "dynamic disk" that present themselves in Windows as a single logical drive (E:) and that's where all my data lives.Windows Media Centre has now stopped working properly and I've tried everything to fix it, in case I can avoid a reinstall! mcupdate.exe always crashes(with System.IO.FileNotFoundException): I can't update TV signal set-up or guide data ) so now I need to reinstall windows. I'm an IT professional and I've installed many prior versions of windows in the past, but never Windows 7:
1) If I reinstall Windows 7 on my C:/ drive, will the E: drive be left unaffected and the fresh install of windows will still be able to see the E: drive and access all the data on it without any permissions issues?
2) The company that I bought the HTPC from neglected to give me a DVD with the Windows 7 installer (and prod key) on and they went out of business a few months ago, so I'm feeling a bit stuck. I've used a free tool to extract my Windows 7 product key from the registry, and borrowed a Windows 7 DVD from a friend. Will reinstalling from this DVD with the product key I've extracted work, or is the product key tied to the physical DVD (or does it just need to pass a checksum algorithm?) If I use my product key to reinstall, will I also be able to re"activate" Windows 7 or will it now think it's a dodgy copy? My current install says it's an OEM version (when I tried to get support from MS.com), but my friend's DVD is a full retail one - is that a problem too? What options do I have here? Can I, for example, create a copy of my friend's DVD and amend the prod-key in the poduct.ini file to be mine in the "HomePremium=" entry?
3) Before I attempt anything, I'm keen to do a full system backup. I've done this with the Windows 7 system image tool and have a 154 GB file that I've copied to an external USB hard drive, and I'm going to create a restore boot "disk" on a CD. However, If I need to do a restore, can the restore app read from a USB HD or not? I assume it can't read from the dynamic disk E: drive? Or can I just keep it on the C: drive, or will this get wiped completely when I reinstall windows, thus losing the image file?
Changing Partition System - Windows 7 Can Only Be Installed To GPT Disks
May 30, 2012As Windows tells me, "on EFI systems, Windows can only be installed to GPT disks". This is the error message I get trying to install a Windows upgrade from 7 Home Premium to Pro. I have to do a custom install because I am installing English over Russian. I have looked on the internet about how to change my partition system to GPT. Seems like something I can do, however, I have a question: If I have only one physical hard drive in my machine, is it possible the change the partition system from MBR to GPT? I see lots of examples of doing it to a second hard drive, but not many when it is the only hard drive. It is a new drive and clean, so I do not worry at this point about the data on it.
View 4 Replies View RelatedUsing Upgrade Disks To Move From Vista 32bit To Windows 7 64bit
Sep 20, 2011Although I'm presently running with Win 7 32bit I want to move to Win 7 64bit. I have the upgrade disks (both 32 & 64 bit) I purchased to upgrade from Vista. I now realise I'll have to re-install Vista before I can then try the Win 7 64bit upgrade. So far I've tried booting my machine with the Vista recovery disk I have from the OEM, and at the point of "install" (when it came to the point of re-installing Vista)swapped it for the Win 7 64bit. I then hit the buffers with the install procedure not recognizing the drivers for the CD/DVD drive ........ which I found has an enormous thread all by itself on this site.I do have 2 other external drives (J: and L: ) and a partition on the disk K:, for users and data; will I need to copy the contents of the disk to one of these ?? Has anyone any experience of using upgrade disks to move from Vista 32bit to Win 7 64bit? Will this difficulty with the unrecognized CD/DVD drive be a showstopper ? Can the upgrade from Vista 32bit to Win 7 64bit actually be done? Is there a tutorial for this type of upgrade?
View 4 Replies View Related