Windows 7 Separate Disks / Same Machine?
Sep 13, 2010
My computer has two 1GB HDDs.Disk C: is the boot disk and is running Windows 7 64 bit upgraded from Vista 64.Can I use the same Win 7 disk (and key) to install to Drive E: as a clean install? I think the new installation would pickup a dual boot system and give me the option as to which I wanted to use.I understand that I can't use the same disk for two different machines.But can I use it for two installations on the same machine?
View 4 Replies
ADVERTISEMENT
May 3, 2011
On Friday I attempted to install windows 7 ultimate x64 My existing machine is a XP Pro SP3 machine and it meets the system requirements as per Windows 7 upgrade advisor I booted from DVD and followed the steps up to selecting where to installl windows 7
This list showed me
Disk 0 Partition 1
Disk 1 Partition 1
Disk 1 Partition 2
Disk 0 is my C drive where my windows xp is installed - 300GB disk Disk 1 is where is store my files: pictures, music, documents etc - 500GB disk Partition 2 of Disk 1 is unallocated 9GB I selected Disk 0 Partition 1 Then selected Disk Options Format Drive Clicked Ok to the message about destroying data And allowed the install to proceed What i intended / expected to happen was that windows 7 ultimate would be installed on drive C: (Disk 0) and that drive D: (Disk 1) would remain intact and untouched by the process The Windows 7 install completed successfully I logged on to my user account, activated my windows 7 copy I then looked at my disks and what i see is that: Drive C was formatted and windows 7 was installed there BUT The install process formatted drive D and copied the windows XP installation to that drive So i have lost a lot of data that i did not expect to, and, of course, had not backed up in ages. For now, anyway, thats beside the point.I then removed the windows 7 DVD from the drive and rebooted the PC When the disk was removed the machine booted to Windows XP - running from the copy taken earlier on Drive D However, when i replaced the DVD to try to boot to windows 7 again, it began the installation process from the start?I dont remember selecting a dual boot option during the initial install, but maybe the steps i took led me to something like that by some default?
View 9 Replies
View Related
Aug 28, 2012
I have got two separate hard drives one running Windows 7 one running xp. I need to be able to chose which os to run but currently I can only do so by pressing F12. I have tried EasyBCD but it wont work - does anyone know how I can do this?
View 1 Replies
View Related
Oct 31, 2010
I have a system drive on a workstation which is 1) removable, 2) contains 2 partitions - one for the sytem & data files, one reserved by the os.
I would like to use this drive and it's file data in an external drive case (SATA) connected to my notebook.
Will the notebook handle the external drive properly?
View 7 Replies
View Related
Jan 4, 2012
i have Lan, all computers are windows 7 proffisional and one machine is windows 2003 , workgroup . i made shared folder in windows2003 , some computers can access the shared folder and others can not.when i open network , i see the 2003 computer, when i try to access it , it asked for user name and password. the user is administrator for all , when i enter the user and password from many computers in the lan it is work correctly but in one machine with the same settings its says , you have no permession to access this computer.
View 3 Replies
View Related
Sep 22, 2010
I have de-commissioned an older machine that I had installed W7 on, I wish to install the W7 from this machine to another, is this possible -if so how?I think I have read somewhere, that once W7 is installed on a machine - it can NEVER be used on any other machine, is this correct?
View 1 Replies
View Related
Feb 20, 2012
I replaced an XP machine with a Win7 machine. When I VPN into our 10 network I can't get to any 192.168 addresses. The XP machine works fine only the Win7 doesn't. I looked at a lot of settings but I can't find anything out of sorts.
View 3 Replies
View Related
Feb 6, 2011
ive got 2 computers hooked up to a router by Ethernet sharing an internet connection, the internet connection works fine for both computers. i would like to share documents also between the computers
-one is a windows xp 32
-one is a windows 7 64
ive set up many networks in the past with a bunch of xp machines without any trouble but now i am having trouble my first step was on the windows 7 machine, i went to control panel -> network and sharing center -> setup a connection or network -> set up a new network this is where i believe i am making a mistake of some kind, it seems that the windows 7 machine is assuming that i want to set up the network wirelessly, when it is connected to the router via Ethernet. it simply brings me to a screen that says choose the wireless router or access point you want to configure, and hangs there with a greyed out next button everything seems to be going fine on the xp machine, i created a new network called "share bear", told it that the computer connects through a residential gateway, enabled file and printer sharing, rebooted the machine, and confirmed that there was a new folder in the network places for shared documents..i went back to the windows 7 machine where it was still hanging, rebooted it, looked for the new network in network and sharing center and it wasn't there, i tried again to "set up a new network" on the windows 7 machine with the same hanging screen
View 4 Replies
View Related
Jan 23, 2012
I have a small network of six computers. Five of them run XP and I just added a Windows 7 machine. I've got a Microsoft Access 2003 database that all of the computers share that is hosted on one of the XP machines. The Windows 7 machine can access the Access database through the network just fine, as long as no one else is accessing it. However, if someone else on an XP machine on the network is using the file, it won't open on the Windows 7 machine. Doubling clicking the file on Windows 7 gives me the circling blue icon for a second or two, then nothing happens. If the XP user exits the database, then I can open it fine. Permissions on the XP that is hosting the database is set to allow everyone. And all the XP machines can access it at the same time.
View 9 Replies
View Related
Jul 31, 2009
I have Windows Seven 7600 and i'm trying to share files with a XP SP2 machine!
Problems:
-XP machine can see Seven machine but can't access shared folders!
-Seven machine can see XP machine but when i'm trying to see shared folders it gives me an error(see on screenshot)
-Network map doesn't work(see screenshot)
-Both machines have same workgroup MSHOME but when i go to homegroup it says there is no people in the homegroup!(see on screenshots)
Other info:
Before i couldn't turn network discovery on,every time i was set it to on he was going to off so I searched on this forum(great forum) and finally i was able to turn it on,maybe others have this problem so there what i did:i go to start=>run=>services.msc and i turned on(also i switched them to automatic startup) these services DNS Client, Function Discovery Resource Publication, SSDP Discovery, and UPnP Device Host services.
IPv6 currently is enabled!
View 9 Replies
View Related
Aug 7, 2012
well i'm try to copy files from my xp machine to my win 7 machine i can see the xp machine but i get a message that says "make sure that the xp machine allow incoming connections for file sharing" and i have done just that i think but its a no go i've just about everything.
View 1 Replies
View Related
Dec 17, 2012
Installing W7 using an old HDD on an old machine to install W7 on a new SSD to be used on a new machine.I'm currently using this old machine from '09 and its performance levels have died down a lot. I bought all the components to build a new machine except I didn't want to spend extra money on another HDD to install the OS on my new 180GB Intel SSD. So basically, I want to use the HDD from my old computer, install W7 onto the SSD, then transfer the drive to my new computer, and use it on the machine and just reinstall all my other files.
View 5 Replies
View Related
Sep 29, 2011
I purchased a upgrade version of Windows 7 with both 32 bit and 64 bit disks. I have two computers; one 64 bit and one 32 bit - can I use both disks?
View 5 Replies
View Related
May 12, 2011
I have Windows 7 Home Premium on my desktop and want to install Windows XP on a WD External Hard Drive. When I insert the CD for installation will I have the option of determining which HD it loads to?
View 8 Replies
View Related
Jan 1, 2012
i got a windows 7 2012 virus by downloading a picture so i wanted to use my homemade recovery disks that i made when i first purchased the laptop and i dont know how to use it. i pressed f2 to go to boot options but cds wasnt listed, also when i restarted the laptop with the cds inside it doesnt prompt me to do anything, it justs boots normally. how do i use these disks?!
View 5 Replies
View Related
Jun 22, 2012
Is there a repair with these disks? I am getting a BOOTMGR missing but I checked the hard drive and it is fine. I do not want to lose anything because I have a lot on it.I cloned my image about 5 days ago and I may go that route, however, I have done things since then and don't want to lose the data. Before I load the HP Recovery disks (4 of them, and I had to order them for free except pay for shipping), is there a repair option?
View 4 Replies
View Related
Oct 30, 2011
I was given a Pavilion DV9000z by my sister who had purchased a replacement for herself. She wiped the two installed hard drives and clean installed windows 7. It appears that there is a 100MB systemm reserved partiion on one disk (total size 320GB, the rest of which was unpartitioned when I got it), and the operating system was loaded on the second disk (120 GB).I had a dead Vista laptop which had a 100GB SATA drive. I wanted to reformat it to have as a sppare. If I pull either one of the original drives out it won't boot. If I take out the 320 GB drive (with the 100MB partition) the laptop either goes black screen (if I move the 120 GB drive into the primary bay) or tries to boot Vista (if I put the scavanged hard drive in the primary bay), or tells me operating system files are lost (if I pull the 120 GB drive and replace it with the scavanged drive).So it appears to me that the 100MB partition on the 320 GB drive is waht the system is booting from, but that it won't load Windows 7 unless the second drive is also there.Is there any way to move the system reserved partition to the 120 GB drive? Or the operating system files to the 320 GB drive? It scares me that if either drive dies, the system won't boot.
View 12 Replies
View Related
May 12, 2012
Almost every Windows application that tries to deal with my new Blu-Ray drive via a Windows dialogue insists on trying to format the BD-R disk first.
You can't format a BD-R disk, it's write-once and formatting would effectively destroy the disk, at $4 a pop.
BD-R disks don't need formatting, those applications that can handle them properly and independently do just fine without formatting.
If I tell it "no, don't format the thing", then Windows insists there's no disk in the drive.
How can I tell Windows 7/64 SP1 to quit trying to format BD-R disks, and recognize them correctly?
View 2 Replies
View Related
Aug 24, 2011
Iv'e put a game in the machine to install and it comes up with the autorun option and i select to run installer.exe and then the comp just does nothing. just sits there as if i havent entered any commands whatsoever. what can i do?
View 4 Replies
View Related
Feb 6, 2011
ive got 2 computers hooked up to a router by Ethernet sharing an internet connection, the internet connection works fine for both computers. i would like to share documents also between the computers
-one is a windows xp 32
-one is a windows 7 64
ive set up many networks in the past with a bunch of xp machines without any trouble but now i am having trouble my first step was on the windows 7 machine, i went to control panel -> network and sharing center -> setup a connection or network -> set up a new network this is where i believe i am making a mistake of some kind, it seems that the windows 7 machine is assuming that i want to set up the network wirelessly, when it is connected to the router via Ethernet. it simply brings me to a screen that says choose the wireless router or access point you want to configure, and hangs there with a greyed out next button everything seems to be going fine on the xp machine, i created a new network called "sharebear", told it that the computer connects through a residential gateway, enabled file and printer sharing, rebooted the machine, and confirmed that there was a new folder in the network places for shared documents.i went back to the windows 7 machine where it was still hanging, rebooted it, looked for the new network in network and sharing center and it wasn't there, i tried again to "set up a new network" on the windows 7 machine with the same hanging screen.
View 3 Replies
View Related
May 19, 2010
I have 5 hard drives in my system and I have installed windows 7 x64 on 2 separate drives and done this within windows. However a few times it booted okay but then started hanging on the post where it states verifying DMI pool data. Subsequently I tried everything to repair as I thought that the MBR was probably corrupted.
I have installed windows separately now on each drive by disconnecting all drives except the one that I am installing and then shut that down, disconnected it and connected the next and installed a fresh copy there to.
I am concerned that windows will corrupt the MBR again when I connect the drives one by one. I am not overly optimistic about windows boot manager and its reliability.
View 3 Replies
View Related
Jul 5, 2012
I want to run two separate drives from the same windows. I want to have all of my personal stuff on one disc and my business on the other disc, but still just running one windows from one hard drive. What is the best way to do this?
View 7 Replies
View Related
Apr 16, 2011
I've just got a fresh Windows 7 install up, and I was wondering-- is it worth keeping an admin account separate, and running on a standard user unless needed? Would some things be restricted completely, or would it just require a password instead of automatic? Also, if it is the case that I should be running in standard for security reasons, can I make a new account, switch that one to admin, and make this one standard without messing anything up? I have a bit of programs installed on this current administrator account (right now, the only one on the computer. The programs I have installed, specifically, are Avira/Malwarebytes and Firefox.
View 5 Replies
View Related
Feb 24, 2011
Is it possible to get Windows 7 to use 2 keyboard BUT where the 2nd keyboard has separate inputs associated with it? This is regarding a flight simulator, where I want to use a 2nd keyboard as an input panel, effectively doubling my assignable keys. Is there some hack, 3rd part app or other way to do this in Windows 7?
View 3 Replies
View Related
Nov 23, 2011
Ok I have Win XP on a ide drive (still use) I bought Windows 7 and installed on a seperate drive (sata) I also Have a 1TB Storage drive for media, files etc... (sata)
Now how do I do a dual boot with what operating system I want to start with Currently, I am disconnecting one of the drives from inside the case to use either Xp or 7.
As I know when using XP it says C Drive and the same for Windows 7 when Im using that...
Think it will crash or fail to install as they both say C Drive where the O.S. is.
Ok.I got it using Easy BCD..with no issues apart from a major one now!
I have 4 Sata connections on mobo
1-Data Drive for files / media (1TB)
2-Win 7 (320Gb)
3-DVDRW Drive
4-Blank
on iDE cable - is Win XP
Now upon startup where it asks wither I want 7 or XP I can open/eject the drive but when either OS Starts and is ready to use ...my drive sticks ...cant open screen freezes!
Tried in 4th Sata connection and also other drive and same thing happens!
Mobo specs are : MCP6P M2+
4GB Memory
View 1 Replies
View Related
May 12, 2011
I have Windows 7 on a 30GB SSD, and a 2TB HD I keep most of my games and whatnot on. I want to learn Objective C programming and Cocoa Touch for developing Apps. But to the point, I need to run the SDK. I can't do that on Windows (I think) and buying a Mac just to learn programming is out of the question. I may be able to build a hackintosh, but I'd rather not. That being said, I want to know if I can create a Dual Boot system where Windows 7 is my main/default OS, and have a separate Hard drive for the OS x leopard. I've seen some tutorials stating on how to partition ONE drive. I don't want that. I want two separate drives. One only for OS X, and the other only for Windows 7. Is this possible? I'm willing to buy a 1 TB drive and get it going. Have Windows 7 and OSX. Want both on my PC without having to partition one drive. Want separate drives for each OS.
View 2 Replies
View Related
Oct 31, 2011
I have a Lenovo with Win 7 on it and the following specs.Pentium CPU P6100 @ 2.00GHz4.00 GB64-bit OSso what I want to do is create 4 different accounts on my windows 7. Each account has to have its own web surfing history and cookies and private setting. The reason is because I want use on each account a different VPN with its own dedicated IP address.if anybody can let me know how I could do this step.
View 1 Replies
View Related
Apr 6, 2012
my sister downloads 4-5 games a week that always appear on my computer desktop. she has an administer account that i think she needs to download the games. when i delete her games from my desktop, they disappear from hers
View 4 Replies
View Related
Nov 20, 2012
I foolishly removed folders from my HDD which I mistaken for one I was cleaning up.For some reason there were windows folders on it even though my operating system is on a separate SSD.I did it in mini XP using hirens.I tried several ways to reinstall and recover the folders before restarting my pc to see if I had stuffed up.On restart it went into repair mode,I tried a few things, still no good.Two questions, 1 why is there OS folders on my HDD? 2 can i recover or do i reinstall?
View 1 Replies
View Related
Jul 31, 2010
I saw thread on similar problem and mentioned I need to make sure services.msc -> Virtual Disk Service (VDS) to automatic and started. I made this change and click the install again. The same message shown again.After message the VDS will stopped. I can restart and try install again. no luck.I also try sfc/scannow and no luck.My laptop is HP dv2000.
View 2 Replies
View Related
Sep 19, 2011
So, I recently bought a used computer from CL. The machine is a Dell Laptop that originally had Windows Vista installed on it. The original owner upgraded to Windows 7 Enterprise and had a bunch of new software installed on the machine. (FL Studio, Photoshop, etc.)I was able to use the computer successfully for the first day until I installed iTunes. Something went wrong, and now when I boot up in normal mode Windows will freeze as soon as i try to open anything. I can open the Start menu, but anything past that will cause a freeze. The computer works fine in all Safe ModesSo, what I would like to do is restore Windows 7 to it's original configurations and still be able to keep all those great programs already installed. However, I do not any of the Windows 7 media that was used for the upgrade. What can I do? Will creating a system image work, or will I end up just copying the freeze problem if I do that?
View 3 Replies
View Related
