Installing Windows 7 And XP On Separate Drives
Nov 23, 2011
Ok I have Win XP on a ide drive (still use) I bought Windows 7 and installed on a seperate drive (sata) I also Have a 1TB Storage drive for media, files etc... (sata)
Now how do I do a dual boot with what operating system I want to start with Currently, I am disconnecting one of the drives from inside the case to use either Xp or 7.
As I know when using XP it says C Drive and the same for Windows 7 when Im using that...
Think it will crash or fail to install as they both say C Drive where the O.S. is.
Ok.I got it using Easy BCD..with no issues apart from a major one now!
I have 4 Sata connections on mobo
1-Data Drive for files / media (1TB)
2-Win 7 (320Gb)
3-DVDRW Drive
4-Blank
on iDE cable - is Win XP
Now upon startup where it asks wither I want 7 or XP I can open/eject the drive but when either OS Starts and is ready to use ...my drive sticks ...cant open screen freezes!
Tried in 4th Sata connection and also other drive and same thing happens!
Mobo specs are : MCP6P M2+
4GB Memory
View 1 Replies
ADVERTISEMENT
May 19, 2010
I have 5 hard drives in my system and I have installed windows 7 x64 on 2 separate drives and done this within windows. However a few times it booted okay but then started hanging on the post where it states verifying DMI pool data. Subsequently I tried everything to repair as I thought that the MBR was probably corrupted.
I have installed windows separately now on each drive by disconnecting all drives except the one that I am installing and then shut that down, disconnected it and connected the next and installed a fresh copy there to.
I am concerned that windows will corrupt the MBR again when I connect the drives one by one. I am not overly optimistic about windows boot manager and its reliability.
View 3 Replies
View Related
Jul 5, 2012
I want to run two separate drives from the same windows. I want to have all of my personal stuff on one disc and my business on the other disc, but still just running one windows from one hard drive. What is the best way to do this?
View 7 Replies
View Related
Sep 28, 2012
I have (2) internal hardrives in my current pc, what i want to do is install a separate Win 7 OS on each. I have read that you unplug the main hardrive which already has the Win 7 OS on it. And I proceed to plug in the other hard drive, but my pc never allows my to install the Win 7 CD Rom Install disk. I keep getting the "No Boot Device Available error" It sees the hard drive and the CD Rom when I try to click on either i get the No Boot Device Available Error. When both Hard drives are plugged in there is no problems windows boots fine. How can I get the second hard drive to install the CD Rom so I can have (2) separate OS systems on the two hard drives. I am using a Dell Precision T3500 if that has anything to do with it.
View 3 Replies
View Related
Mar 4, 2012
I currently have Windows 7 installed on two separate drives in my box. I can only set (select) boot sequence in the BIOS. If I recall correctly, way back when a boot selection menu would appear when I think I was running Windows 7 (when it first came out) alongside XP but that screen no longer appears with my current setup. Is there a way to get that screen back, or an alternate way to select the OS of choice without the hassle?
View 9 Replies
View Related
Dec 1, 2010
I have a question regarding the install of Windows 7 Professional 64 bit. I've done this on one HDD successfully and due to conflicts with additional software I wish to reinstall Windows 7 on a completely new HDD (on the same machine). This way I can keep both programs separate also leaving me with an additional OS in case the other fails. I plan to use the BIOS to switch to the other drive (boot order) when I wish to use the other software on occassion. I plan on backing up my files onto an external drive. So my question is as such, can I load Windows 7 onto a separate drive and switch the drive of which to boot from to achieve my goal?
View 9 Replies
View Related
Mar 3, 2011
I have separate ide drives one is installed with XP Pro and the other with windows 7. I want to have the choice of either os when the pc boots i.e. choose the drive to boot the pc.
View 2 Replies
View Related
Dec 13, 2010
I have Window XP installed on Drive C:. My son installed Windows 7 on Drive E:. However, when the computer is booted up, it boots up in Windows 7, without allowing a choice. I suspect this can be corrected in BIOS, but don't want to screw it up.
View 5 Replies
View Related
Mar 5, 2011
Currently running Win7(64-bit) in RAID-0 on 2 WD Caviar Black's.I just purchased a SSD drive.What I want to do is load Win7 on the SSD and use that as my main drive, while also keeping my RAID drives boot-able and in tact as they are now. (Thus, a dual-boot Win7 setup)Will the BIOS allow me to select which drive to boot from upon start-up? My mobo is an ASUS Rampage II Extreme.
View 6 Replies
View Related
Dec 6, 2009
Is there an easy way to dual boot on separate drives, i have installed windows 7 on 1 drive & vista on another. This was done independenly on the same machine as to say put vista on last year the got another hard drive took the vista drive out put new hard drive in & installed windows 7.I connected both. they see each other.I have read lots about reinstall one OS but nothing on if its already installed. IS THERE AWAY?
View 1 Replies
View Related
Sep 22, 2012
I have read that using a computer specifically for financial transactions with known and trusted entities (such as a bank) is a good way to reduce (though not eliminate) the risk of your accounts being hacked by reducing the likelihood of inadvertently installing a malware, spyware, or virus by reducing internet sites visited. Assuming this is correct, I was wondering about dual booting one computer with two physical hard drives (each with its own OS) versus one hard drive with two partitions. I figure the former would be "more secure" since one drive would be isolated from any unwanted programs. However, since they shared a few things (motherboard and such), is this set up as "secure" as having two computers? If so, how does one go about setting up a dual boot with two separate hard drives of the same operating system using one computer?
View 5 Replies
View Related
Nov 26, 2009
I want to install 7 on a separate hard drive to see how it works & work indepenantly on it's own system. How can I if at all make it so when I am booting up I can toggle in between 7 & xp startups.
View 4 Replies
View Related
Dec 1, 2009
i have xp home 32 bit as my OS now and i have another hard drive installed and ready to install win 7 64 bit on to. can i do this with xp running or should i disconnect the HD with xp on it, then when i start the computer it won't see any OS and then i could boot from the win7 dvd and do a clean installl and then re=connect the HD with xp on it.
then when i start computer i should get the choice of which one to boot from or is this not the way to do it?? i want the OS's on separate HD's for now as i am sure that not everything that i want to run will work on the 64 bit win7 until i can afford to get all the programs i use to work on win7.
View 2 Replies
View Related
Jan 6, 2010
I currently have windows 7 ultimate in a Dell Gx270 P4 2.6ghz I know its old. And i want to Install Windows XP in another hard drive i have, but how do i make both hard drives boot, so i can select which one i want to boot.
I'm doing this because XP mode doesn't work in this computer. And i don't want to partition.
Most information i find in google requires partitioning and i don't want that.
If you know how please post it, or post the Links where i can find it.
View 1 Replies
View Related
Aug 8, 2012
in the past i had a seperate personal hd for my work laptop I would take my work HD out then install my personal drive in and it worked great. But now on new laptop there is a biosandhard drive can I still switch hard drives or will it not work or will my work know I swap. Them.
View 2 Replies
View Related
Oct 17, 2012
My computer has windows 7. I created a separate partition on my hard drive to install windows xp, but now when I try to install it I get an chkdsk /f error.
View 5 Replies
View Related
Sep 23, 2009
When the final version of Windows 7 is released I am going to install the Windows 7 operating system to my C drive and put my data on a separate physical D drive. I am going to put the temporary Internet files and the Windows temporary files folders on that D drive. What user folders would anyone suggests go to the D drive and what other data and/or folders would anyone suggest to go on the D drive?
View 4 Replies
View Related
Jun 3, 2010
Windows 7 Home premium pre installed on system when purchased (SATA0). I put in a new hard drive (SATA1). What i want to do is install windows XP home edition on the HD that i just installed. When i restart and boot from disk the windows installer shows up and gives me an error message that says check drive F: (New HD) for errors, Viruses etc. which i have done over and over and still nothing. I have searched more threads than i can count and have found problems similar but have tried to do what others did to correct with no luck.
View 2 Replies
View Related
Mar 26, 2012
I have a common problem, which I see has afflicted many (wish I had read the forum b4 venturing forth). I have a Win XP SP3 install working on the C drive. No problems there and working for over a year. I wanted to set up a dual boot Win 7 on a separate disk. No problem in the installation.
When I went to boot the system I realised that the install had changed the XP install because when I removed the Win 7 HDD my old system would not boot. I now realise that I have to use the two HDDs in tandem to have a working dual boot, which is not what I had wanted.
Another silly mistake made was that I didn't set a restore point when setting out as I thought I was being careful in installing Win 7 on a separate HDD. Now I realise that theWin 7 boot loader has overwritten the old boot.ini file. Without a restore point how do I get back to a working Win XP boot.
I am wanting to return to old state and install Win 7 again, but this time disconnecting the Win XP drive. The system will detect a new formatted blank drive only and hopefully set up a stand alone Win 7 installation.
Am I making sense and more importantly can it be done given I didn't set a restore point on my Win XP installation before setting out? I have read in forums that in Win XP I can go to the boot.ini file via msconfig and manually make some alterations to make the dual boot go back to only booting the Xp install.
View 8 Replies
View Related
Aug 28, 2012
I have got two separate hard drives one running Windows 7 one running xp. I need to be able to chose which os to run but currently I can only do so by pressing F12. I have tried EasyBCD but it wont work - does anyone know how I can do this?
View 1 Replies
View Related
Mar 26, 2010
I built a new PC and I have my old hard drive. What I would like is to install windows 7 on each hard drive and at start up be given the choice of which one I want to start up. Is this possible and if so how is it done. I did a search and I don't think I know what this is called because while I get the impression from other threads that it can be done I can't find out how. So when the PC powers up I want it to give me the choice of using HD1 or HD2 and each HD having its own windows on it that is completely separate from the other HD.
View 11 Replies
View Related
Sep 12, 2010
I have 3 harddrives the primary i dont care if its formatted, thats the one the OS goes on. the other 2 have all my movies on it (3tb total, 1tb and 2tb drive) will these 2 extra drives be formatted as well or untouched? If they are going to be formated can i just upplug them and plug back in once 7 is installed note if it matters ill be installing Windows 7 unltimate NOT the upgrade?
View 1 Replies
View Related
Dec 12, 2010
when i try installing windows 7 on my netbook over a network it wont detect my hard drives
View 9 Replies
View Related
Aug 24, 2011
ack when I first set up my system I used a tutorial on this forum that showed how to install the OS on one drive and everything else on the other. The setup required changing the registry settings in audit mode during the initial OS install. I am looking for this tutorial but now can't find it. I even posted in this post, but even those are missing so I can't just trace my posts. I'm confused as to why it is missing and am hoping anybody could lead me back to it.
View 9 Replies
View Related
Apr 30, 2012
I'm about to install windows 7 64bit, onto a new system, with 3 hard drives. One for OS and Data. Second one (SSD) will only be used for caching - fast boot. Third one for -printer-pagefile etc. System is ASUS P8Z77-V deluxe, which has UEFI. Do I need MBR partitions or GPT Partitions.
View 1 Replies
View Related
Sep 6, 2012
I have a HP Probook 4530swith Windows 7 Home Premium 64 bit. When I turn on the PC the windows does'nt start and give a option of starting windows manually, which does'nt work, and repair windows. Repairing windows with windows 7I then decided to reinstall windows 7, but while installing, on the select disk page, it shows a error saying no drives found.I then performed a Hard Disk Test which resulted in failure saying:Failure ID : UC7WX0-5NB67S-XD6V5G-60TF03
View 2 Replies
View Related
Oct 22, 2009
So when I got my P6TDeluxe and two 75gb SAS drives a year ago I was planning on installing Vista x64 onto the SAS drives and call all my data from my terabyte drive. Brilliant, I thought, until vista was unable to install on the drives (let alone detect them during installation).
My question for you is this:
Will Windows 7 recognize the SAS drives as raw partitions that can be used as an install point
and
Can I do this in Raid0? Raid1?
View 3 Replies
View Related
Oct 23, 2009
So when I got my P6TDeluxe and two 75gb SAS drives a year ago I was planning on installing Vista x64 onto the SAS drives and call all my data from my terabyte drive. Brilliant, I thought, until vista was unable to install on the drives (let alone detect them during installation).
My question for you is this:
Will Windows 7 recognize the SAS drives as raw partitions that can be used as an install point
and
Can I do this in Raid0? Raid1?
View 0 Replies
View Related
Mar 6, 2011
Let me say first that I am not dual booting. I have a 250gb Internal SATA drive, and a 800gb internal SATA drive. Both hooked up and ready to go.What I want to do, and am unsure if it's possible, is to install Windows 7 64bit on the 250gb drive, and thats IT. I want to boot from that drive, but everything else I want to go onto the 800gb drive.I haven't done this yet but I get the feeling that if I were, when it boots from the 250, things that I download and install would always try and add themselves there. And I dread of having to manually move downloaded files and redirect installed programs every time.
View 2 Replies
View Related
Jun 12, 2011
My boyfriend reinstalled Windows 7 the other day to clear the crap from his system but unfortunately realised once he had done a quick format and reinstalled it that he had selected his back up drive and not the C drive. He then did it to the C drive but didn't uninstall it from the back up drive, and now it throws up a message saying the registration number has been used twice so is blocked but when he contacted Microsoft they said there is nothing they can do to unblock it. I don't believe buying a new version of Windows 7 is the only solution as it's a legal version bought from Amazon, has only been installed on his PC and surely as Adobe can deregister programs from their end it would be possible for Microsoft to do it. I know about the Adobe one as I have had to do it twice recently!
View 7 Replies
View Related
Mar 7, 2011
i own Garrysmod, a steam source-mod. It is a game that grows dynamically as I connect to server's, download addons, and receive mandatory game updates.The game file has exceeded 50Gb before.After getting infected with "Windows 7 Antivirus Pro" and making (I freely admit it, and I REALLY should have known better) a terrible mistake and breaking all .exe's while removing the infection, I was forced to re-install windows. However, for whatever reason (another stupid mistake) I re-installed windows on the wrong hard-drive. So now my C: drive is only 150 Gb, and my backup (both of them) are 1TB.I do not have the space to have garrysmod on my C: drive, which is where steam is installed (Last time I tried installing it somewhere else it would not work.)Now that the background information is done lets move on to what you can help me with!
I have been looking for a way to install garrysmod on another hard-drive without reinstalling steam and trying to get it to work on another hard-drive. I believe I have found one, but I am really a coward when it comes to this sort of thing, (I HATE re-formatting) the solution I have found apparently tells the computer that the directory/file is on C: when it is actually on another hard-drive, but I found it in an old forum thread, and the member that had posted it was banned.
View 3 Replies
View Related