So when I got my P6TDeluxe and two 75gb SAS drives a year ago I was planning on installing Vista x64 onto the SAS drives and call all my data from my terabyte drive. Brilliant, I thought, until vista was unable to install on the drives (let alone detect them during installation).
My question for you is this:
Will Windows 7 recognize the SAS drives as raw partitions that can be used as an install point
and
Can I do this in Raid0? Raid1?
So when I got my P6TDeluxe and two 75gb SAS drives a year ago I was planning on installing Vista x64 onto the SAS drives and call all my data from my terabyte drive. Brilliant, I thought, until vista was unable to install on the drives (let alone detect them during installation).
My question for you is this:
Will Windows 7 recognize the SAS drives as raw partitions that can be used as an install point
and
Can I do this in Raid0? Raid1?
I have 5 hard drives in my system and I have installed windows 7 x64 on 2 separate drives and done this within windows. However a few times it booted okay but then started hanging on the post where it states verifying DMI pool data. Subsequently I tried everything to repair as I thought that the MBR was probably corrupted.
I have installed windows separately now on each drive by disconnecting all drives except the one that I am installing and then shut that down, disconnected it and connected the next and installed a fresh copy there to.
I am concerned that windows will corrupt the MBR again when I connect the drives one by one. I am not overly optimistic about windows boot manager and its reliability.
Let me say first that I am not dual booting. I have a 250gb Internal SATA drive, and a 800gb internal SATA drive. Both hooked up and ready to go.What I want to do, and am unsure if it's possible, is to install Windows 7 64bit on the 250gb drive, and thats IT. I want to boot from that drive, but everything else I want to go onto the 800gb drive.I haven't done this yet but I get the feeling that if I were, when it boots from the 250, things that I download and install would always try and add themselves there. And I dread of having to manually move downloaded files and redirect installed programs every time.
View 2 Replies View RelatedOk I have Win XP on a ide drive (still use) I bought Windows 7 and installed on a seperate drive (sata) I also Have a 1TB Storage drive for media, files etc... (sata)
Now how do I do a dual boot with what operating system I want to start with Currently, I am disconnecting one of the drives from inside the case to use either Xp or 7.
As I know when using XP it says C Drive and the same for Windows 7 when Im using that...
Think it will crash or fail to install as they both say C Drive where the O.S. is.
Ok.I got it using Easy BCD..with no issues apart from a major one now!
I have 4 Sata connections on mobo
1-Data Drive for files / media (1TB)
2-Win 7 (320Gb)
3-DVDRW Drive
4-Blank
on iDE cable - is Win XP
Now upon startup where it asks wither I want 7 or XP I can open/eject the drive but when either OS Starts and is ready to use ...my drive sticks ...cant open screen freezes!
Tried in 4th Sata connection and also other drive and same thing happens!
Mobo specs are : MCP6P M2+
4GB Memory
I built a new PC and I have my old hard drive. What I would like is to install windows 7 on each hard drive and at start up be given the choice of which one I want to start up. Is this possible and if so how is it done. I did a search and I don't think I know what this is called because while I get the impression from other threads that it can be done I can't find out how. So when the PC powers up I want it to give me the choice of using HD1 or HD2 and each HD having its own windows on it that is completely separate from the other HD.
View 11 Replies View RelatedI have 3 harddrives the primary i dont care if its formatted, thats the one the OS goes on. the other 2 have all my movies on it (3tb total, 1tb and 2tb drive) will these 2 extra drives be formatted as well or untouched? If they are going to be formated can i just upplug them and plug back in once 7 is installed note if it matters ill be installing Windows 7 unltimate NOT the upgrade?
View 1 Replies View RelatedMy boyfriend reinstalled Windows 7 the other day to clear the crap from his system but unfortunately realised once he had done a quick format and reinstalled it that he had selected his back up drive and not the C drive. He then did it to the C drive but didn't uninstall it from the back up drive, and now it throws up a message saying the registration number has been used twice so is blocked but when he contacted Microsoft they said there is nothing they can do to unblock it. I don't believe buying a new version of Windows 7 is the only solution as it's a legal version bought from Amazon, has only been installed on his PC and surely as Adobe can deregister programs from their end it would be possible for Microsoft to do it. I know about the Adobe one as I have had to do it twice recently!
View 7 Replies View Relatedwhen i try installing windows 7 on my netbook over a network it wont detect my hard drives
View 9 Replies View Relatedack when I first set up my system I used a tutorial on this forum that showed how to install the OS on one drive and everything else on the other. The setup required changing the registry settings in audit mode during the initial OS install. I am looking for this tutorial but now can't find it. I even posted in this post, but even those are missing so I can't just trace my posts. I'm confused as to why it is missing and am hoping anybody could lead me back to it.
View 9 Replies View RelatedI'm about to install windows 7 64bit, onto a new system, with 3 hard drives. One for OS and Data. Second one (SSD) will only be used for caching - fast boot. Third one for -printer-pagefile etc. System is ASUS P8Z77-V deluxe, which has UEFI. Do I need MBR partitions or GPT Partitions.
View 1 Replies View Relatedi own Garrysmod, a steam source-mod. It is a game that grows dynamically as I connect to server's, download addons, and receive mandatory game updates.The game file has exceeded 50Gb before.After getting infected with "Windows 7 Antivirus Pro" and making (I freely admit it, and I REALLY should have known better) a terrible mistake and breaking all .exe's while removing the infection, I was forced to re-install windows. However, for whatever reason (another stupid mistake) I re-installed windows on the wrong hard-drive. So now my C: drive is only 150 Gb, and my backup (both of them) are 1TB.I do not have the space to have garrysmod on my C: drive, which is where steam is installed (Last time I tried installing it somewhere else it would not work.)Now that the background information is done lets move on to what you can help me with!
I have been looking for a way to install garrysmod on another hard-drive without reinstalling steam and trying to get it to work on another hard-drive. I believe I have found one, but I am really a coward when it comes to this sort of thing, (I HATE re-formatting) the solution I have found apparently tells the computer that the directory/file is on C: when it is actually on another hard-drive, but I found it in an old forum thread, and the member that had posted it was banned.
I have a HP Probook 4530swith Windows 7 Home Premium 64 bit. When I turn on the PC the windows does'nt start and give a option of starting windows manually, which does'nt work, and repair windows. Repairing windows with windows 7I then decided to reinstall windows 7, but while installing, on the select disk page, it shows a error saying no drives found.I then performed a Hard Disk Test which resulted in failure saying:Failure ID : UC7WX0-5NB67S-XD6V5G-60TF03
View 2 Replies View RelatedI just finished putting together my computer, installed Windows 7 Pro 64 bits. However, both of my hard drives (one SSD, one regular HDD) are showing up as external drives (plug-and-play). If I click the "Safely Remove Hardware" icon, I could actually "eject" both of my hard drives.
View 5 Replies View Relatedam trying to do a backup of my Win 7 system drive (C, but the backup utility is saying that it must backup by non-system drives (E: and H, which happen to have "System Volume Information" folders on them. They are not system drives. E: is my main utilities drive and H: is my games drive.Somehow, Windows thinks they are system drives, when in reality they aren't.Any ideas on how to change them? When I go in to Disk Management, they are not showing as system drives. They are all partitions on the same hard drive, but there are other partitions not included in the backup.
View 3 Replies View RelatedHow do I installing something during the Windows Setup Menu's Installing features and Installing updates?
View 3 Replies View RelatedI have tried installing on 1 stick of ram, the old HDD is unplugged, have deleted the partitions, running bios in AHCI mode using 6gb/sec cable, when I look in the drive some windows files have been copied onto the SSD and it is accessable. It is a Corsair Force series 3 120Gb.
View 4 Replies View RelatedI recently had Windows 7 installed and now I can not use the DVD or CD drives. I have checked and the drives are installed and ok. I am using 32 bit. Also, I have NOD32 and Ariva anti virus plus Malware.
View 9 Replies View RelatedI have installed windows 7 on a sata drive. I also have 2 IDE drives connected to the motherboard but I cant find either with Windows 7. There are no operating system on these drives just backed up files. When I disconnect the windowes 7 drive and reconnect my old drive with XP running on it, both the IDE drives are visible and working normally.
I have tried clicking refresh on the devise manager but the drives are not found. My floppy drive and dvd drive are visble and working properly. Anyone any ideas?
No drives were found.click Load Drivers to provide a MASS STORAGE DRIVER FOR INSTALLATION.Ok im helping a friend with their computer but have run into a brick wall where can i find a mass storage driver for a hp pavilion dv6-2150us Serial:cnfo146518Product: wa779ua#abarying to install windows 7 home premium 32bitut i get the following during setup No drives were found.click Load Drivers to provide a MASS STORAGE DRIVER FOR INSTALLATION
View 14 Replies View Relatedin 7 doesn't see any USB flash drives. Check in disk management - not showing up there either.AND........If I switch HDDs & revert to XP - same thing. No usb flash drives appear. And in control panel > disk management they do not appear as unassigned also.
View 1 Replies View RelatedTech Support Guy System Info Utility version 1.0.0.2
OS Version:
Processor:
Processor Count:
RAM:
Graphics Card:
Hard Drives:
Motherboard:
Antivirus: None
I have developed a problem where, when I use a SD-Card, Memory Stick or an external Hard Drive (USB connection) to my Computer running Windows 7, I am unable to add any files to either as I am told that the items are Right Protected. In the past I did not have this problem. I also have a similar problem when I try to run some other programs.
all of a sudden my 2 cd-rw drives are recognized as cd-rom.
no new programs have been installed. i have win 7, 64 bit
It appears that Microsoft has disabled the Autorun feature for USB devices in Windows 7. If you create an appropriate Autorun.inf file on your USB drive, Vista (and XP?) will happily run the program it points to when you plug the device in, but in Windows 7 that is no longer the case. I've read a few news articles explaining that this is by design, out of security concerns.
While I understand and even agree with the reasoning, I was wondering whether there was a way (perhaps in the Group Policy editor, or some Registry hack) to override or bypass this?
I have just created a nice autorun feature to enable me to mount a TrueCrypt-encrypted container on my USB stick, but that no longer works in Windows 7. (Can't use BitLocker as I still need uncrypted access to the root of the drive in order for BitLocker to allow Windows 7 to start on my fully encrypted C:-drive).
Quote: A new rumor has sprung up that suggests Microsoft is looking at a third alternative for sending out copies of Windows 7: USB drives. There are currently two known ways to move to Windows 7 without buying a new computer: via retail or via download.
The third solution would make it easy for users with netbooks without DVD drives, most of which are running Windows XP (as opposed to Vista), to upgrade to Windows 7.
Of course, installation from USB is much faster than from DVD, so such an option could end up being adopted by a larger demographic. USB drives are still more expensive than DVDs to mass manufacture, however, so I doubt Microsoft would be happy with that.
CNET quotes an undisclosed source in its speculative report: "Microsoft is considering offering Windows 7 on a thumb drive to allow netbook owners to more easily upgrade their machines." Microsoft confirmed in February that all editions of Windows 7 would run on netbooks but never disclosed how those who already own the low-end computers could get the operating system on their system.
The currently only known solution, downloading a copy and putting the installation on a USB drive, isn't a process many netbook users would be happy to do. If the USB drive option is skipped, most will likely have a friend or a tech support guy get the job done for them.
On another note, could this rumor somehow be related to StartKey, a Microsoft technology that was supposed to allow users to store entire Windows profiles and all their data on portable flash drives? Many criticized it in March 2008 but Microsoft has yet to acknowledge it, assuming it hasn't already been scrapped.
I'm using the dell inspiron 1545 with Windows 7 64-bit(C. I also have ubuntu installed in D:.
View 7 Replies View RelatedI have purchased a Sony Vaio laptop day before yesterday.I forgot to get the drive partitioned at the store and so decided to to it myself and i made a blunder.I wanted to allocate 60GB to C Drive and rest to the new Drive, but i allocated it the other way.But My when i open the My Computer, there is no partition as such although in Control panel it is being displayed as 50 GB free and upon right clicking I have an option to delete that 50 GB disk but i am not sure if upon deleting it whether i loose this space.Also my HD was 320 GB which now shows to be only 232 GB ( C DRIVE).Where have i lost this good amount of space?I have tried fragmenting but it executes in cycle reading % consolidation.Once it reaches 100 % it starts again from 1%.Thrice it happened and then i stopped the operation and did the restoration but i don't see any change.
View 1 Replies View RelatedI just installed a new Intel X-25 160GB SSD drive in my laptop, replacing my Vista WD Hard Drive, then installed Windows 7 Ultimate on it.
Everything went well, it seems pretty fast and all, however, I noticed that Windows still had the defrag scheduled, which I cancelled.
I was under the impression that Windows 7 was "SSD Aware" and would do things differently in the background when an SSD drive was installed. Is there something I have to do to tell the O/S that I'm using an SSD?
Dont ask me why I want to know, I am not really sure.
A single physical hd can be split into multiple partitions and so multiple drives if you wish.
Q. Can you partition(?) 2 physical hd`s into 1 virtual drive ?
Just curious is all.
I'm trying to get rid of all of the CD drives that are showing up under "devices with removable storage." The go from CD Drive ( F: ) all the way to ( X: )...is there a way to get rid of these?
View 4 Replies View RelatedLooking to set up a Raid0 with 2 x 1 TB drives. Only problem is the drives are from 2 different companies. 1 is a HITACHI Deskstar 1TB 7200 RPM SATA 3.0gb/s, the other is SAMSUNG Spinpoint F3 HD103SJ 1TB 7200 RPM SATA 3.0Gb/s. Am i able still able to combine these 2 drives to make Raid0 array?
View 7 Replies View Related