ok recently I have been having trouble with my windows time syncing, and it used to just take a quick trip to cmd and a few codes to unregister and reregister it to fix it... but now I am getting a "The specified service is not installed" error, any knowledge on how to fix this issue?
View 14 RepliesI have been doing autocadd and here lately my computer has been shuting off and rebooting then having a hyper transport sync flood error occurred on last boot come up i know nothing about computers so i have no idea what that means any advise were to start
View 1 Replies View Relatedi'm running a windows 7 home premium 64 bit, and for some movies, the video will start in-sync for about 40 minutes, then slowly get farther and farther out of sync, making watching the video un-watchable after another 10 minutes. but it does not do this with all video types. it also does not do this with netflix, Internet, or anything else online.
i'm running a geforce gtx 660m, all drivers are up to date. the files that work are: mp4, files that don't work are: mkv, avi
those are the only files i have tried. it's done this since i got this computer a couple months ago
i only have this happen while in on secondlife that my pc . just kicks me down to a reboot up and then this comes up , hyper transportsync flood error and blaa blaa press f1 to continue , how or what do i do?
View 2 Replies View Relatedthey usally happens in the first couple of boots everyday (heard it is called cold boot error)and lately it happened with me while playing hardcore gamesI tried reinstalling win many times and formating the whole HDD but no use.I think the problem is related to my ram cuz sometimes when I rmove them and put them in the motherboard again the problem is solved for some time and sometimes nothing happens at all, and when I run memtest86 it gave me a hell 3M error one time and the other time it gave me 9 passes and 0 errors have win 7 pro x86 full retail versionI bought this computer more than 4 years ago, II had my motherboard fixed before and changed some ICs in it (I think over restarting the computer due to BSoDs caused it)
View 8 Replies View RelatedI unistalled malwarebytes from my pc and now I am getting the following "run-time-error 53, file not found mbam" How do I get rid of that plz?
View 7 Replies View RelatedI m having problem accessing a specific software while log in to my PC under Active Directory domain user. This software works file while work as administrator but show run time error 75 , path/file access error.
View 5 Replies View Relatednow my pc in windows7 and i want to install windows server 2008 but installing time to showing this computer does not have enough space for temprory files windows installation need at least 464 mb space on any partition for temrory files code:0x80070103
View 8 Replies View RelatedWhy my laptop take more time too start when i switch it on. Sometime window repair error on screen display.
View 5 Replies View RelatedAfter installing windows 7 7100 on my PC, everything went just fine, But, after a sudden shut down, my PC restarted, How to resolve this issue?
Program does not have rights or access to a file. Often this is caused when a program is trying to access a network file it doesn't have proper access to either because of network privileges or something is blocking the program. This issue can also be caused when the file is being used by another program or is read-only.
I have a runtime error on my online banking
View 3 Replies View Relatedafter i install filter to Internet this message appear run time error 75 for my operating system windows 7.
View 1 Replies View RelatedStarted getting blue screens for about a month(maybe, i cant remember cause its been so long!) now and i'm going insane because i've spent a LOT of time and effort attempting to fix the bsod's only to failim going to try and include everything i can and not miss anything important and end up looking like a noob.
View 5 Replies View RelatedMy PC have two user accounts: Admin (Administration) and Guest (Standard).i sat time restrictions for Guest account.then, for testing, i restarted my pc and tried to log on with Guest account at certain time. but it showed me this error: "Your account has time restrictions that prevent you from logging on at this time. Please try again later" What is the reason? What should i do to solve it?
View 6 Replies View RelatedI am using VZAccess Manager with a Novatel USB760 modem. I recently installed Avast antivirus software and now I get an error 633 every time I try to connect to the internet
View 1 Replies View RelatedI have windows 7 premium and have word 2002 installed,During the last few days every time I open up word I get a box on screen stating 'Run-Time Error '9' Subscript out of range'.can I have some help here please Have not installed nothing and done nothing different to the pc.
View 9 Replies View RelatedI've started to get random BSOD's on my computer a few weeks back. They seem to have, in all cases but one, been triggered while running a game in fullscreen. A couple of times the computer also just froze, without any BSOD. The funny part is; I've gotten at least four different kinds of error messages on those BSODs. Here are the details: BSOD error messages.
View 19 Replies View RelatedIv downloaded Student Record software from cnet today, when I use the software, fill the student page & click save, it shows Multiple -Step Operation generated, Run-time error - 2147217887 (80040e21). I need a solution urgently, so that I can use this new software I got from cnet freely at school today. My students and staff will be delighted to get this new gift from cnet in my school.
View 5 Replies View RelatedEverytime i try and open a program i get a bad image error...i.e. chrome.exe- Bad Image C:ProgramDataapi-ms-win-core-memory-[1-1-032.dll is either not designed to run on Windows or it contains an error.I have windows 7?
View 1 Replies View RelatedI just reinstalled Windows 7 and added a new motherboard and cpu. I've been getting BSOD all day and it seems to be the same few errors every time, but at different intervals. I've attached a crash report from BlueScreenView.
View 9 Replies View Relatedso lately ive been getting BSOD all the time,i cant play a game more than 15 min before i get BSOD, and when im surfing it takes a little bit longer but after an hour or two of doing NOTHINg on the computer, i still get bluescreen. i dont know what to do, i think its the graphic card that is messing with me. because if i touch it, i almost get burnt, its really hot. error code is stop: 0x00000124 (0x0000000000000000, 0xfffffa8007c9c028, 0x00000000f2000000, 0x00000000002008f) ive never posted here, nor do i know alot about this
View 3 Replies View RelatedEvery time I try and start my laptop I get the BSOD. I tried going to Last Known Good Configuration and it seemed to work as it did not crash immediately, but when I opened the internet the BSOD came back.I attached the dump files and health report and my specs are as follows.
View 3 Replies View RelatedI am receiving an TO limit error while realtime rendering or creating a final render in blender 2.63 - I've done everything including updating or changing drivers (ive connected Nvidia so ive tried out all the drivers they've supported me with), reinstaling Blender and even reinstalling system, but the error still remains. I am Rendering using GPU rendering Mode which was activated in blender file menu user preferences/system/compute device/CUDA. I don't understand why im getting the error since the Graph card performance is normal I've tested it with Stability Test and and it ran over 110 mins without malfunctioning till i stopped it.
Now Nvidia had suggested me changing the TDR. I've created environment and models based on this image - so there's bunch of stuff in it. I am Running Win32, 7 ult. 2 gb of RAM, AMD Athlon 64 x2 dual Core Processor 4800 + 2.51 ghz. Now GPU, Gainward 630 GT 2gb (Direct X 11, PhysX, CUDA Support), Ive bought this GPU Couple of weeks ago specially for GPU Rendering since my x card had lower shader. I am getting Error only with Blender (I've tried rendering on 2.61, but getting same error), it works fine with games (I have 3 games installed all on max Graphics, and they work fine).
My internet time is failing with the following error:
"NtpClient was unable to set a manual peer to use as a time source because of DNS resolution error on ''.
NtpClient will try again in 3473457 minutes and double the reattempt interval thereafter. The error was: The requested name is valid, but no data of the requested type was found. (0x80072AFC)
I assume either my ISP/router is the issue or something else strange is going on. I tried changing my DNS server to the google ones as well as adding a server to my hosts file but it still returns the same error. Just curious what exactly the message means if it really is DNS related as hard-coding the IP into the internet time requester returns the same error.
My samsung 830 ssd (256 gb) was working excellently and last night for some reason it decided to no longer boot at the nice speed at which it did before. Now I believe it is still performing up to par in the OS environment due to my AS SSD score being 724, although I have not seen many others to compare to.The system originally would boot in a time of 15-16 seconds. however, after this error: The boot time jumped to around 30 seconds.The error occurred yesterday night, and I believe I played around with Samsung's SSD Magician Utility, allowed it to "Optimize" the OS, however I am not sure if this was at the time of the reported error.Here is what I've tried so you may dismiss possible solutions
-Flash Bios
-Update SSD Firmware (was already the Latest)
-Re-Optimize through SSD Magician
-Disable Prefetch and Superfetch in regedit
-Unplug My optical Drive from the SATA3 port
-Unplug the SSD, allow the system to enter bios, turn off, then plug in again, to no avail.
-Lastly I uninstalled SSD Magician hoping that the program was the cause of the error, yet that is a no as well.
I've had this problem for a while and it drives me nuts. Every time I shut down my computer it will crash the next time I power up and try to boot windows 7. I can go in and out of sleep or hibernate without issue but if I ever shut down my system it will BSOD during the next power on. After this initial BSOD there are usually a series of BSOD (usually they report different error codes) in subsequent restarts. Eventually the system does seem to stabilize and stop crashing. Once things are working it will run for literally months without another BSOD.
Win 7 Ultimate x64 (retail)
8gb DDR3 ram
i5 750 @ 2.67ghz
RadeonHD 5770 1gb
system is less than 2 years old and OS was last installed ~18 months ago (c: partition reformat and clean install)
Since a couple of month I get an error log message when I launch permon.exe :
Error ID 2001 - Source : Usbperf
Source: UsbperfType: WarningDescription:
Unable to read the "First Counter" value under the usbperfPerformance Key. Status codes returned in data.
Microsoft has published a workaround but it doesn't work on my system : usbperf Event 2004 is logged in Application log
BSOD : 7a Error code AND Blue screen second time
View 1 Replies View RelatedI have BSOD on a cold startup everyday. On most time after the first BSOD of the day the PC will run fine for that whole day. There will be two consecutive BSOD on certain occasions. The problem stops for a week after I updated the NEC USB 3.0 Host controller so it seems there is other problem causing the BSOD but now I am not so sure.
View 6 Replies View RelatedI get the above error every time on startup since installing some software. I have uninstalled the software but still get the error!
I tried system restore but it failed for an unspecified reason
The drive had windows xp on it from another build so i just used it to test. It booted xp fine. It only showed 3gb of ram but i think that was due to it being 1066 and needing me to change bios ram settings. So i took my full version of windows 7 professional that i have used to install on my laptop too and tried to install. I formatted the drive completely and chose to install. It goes through the paces installs.
Then when it is supposed to boot from the hard disk the first time it give me a brief blue screen PAGE_FAULT_IN_NONPAGED_AREA so i research it and see it can be linked to hard disk or ram. So obviously its not the disk its been running xp fine and so has the ram. But just in case i switched out the ram with 1gb of old ddr2 800 i had from another build. Same error. I then tried my new ocz ram with a single chip thinking its a dual channel problem. Same error. So then i reburn the microsoft professional image to a new dvd r go through the process again and reformat and still the same error. I have tested all i know to test. Any other ideas?