I m having problem accessing a specific software while log in to my PC under Active Directory domain user. This software works file while work as administrator but show run time error 75 , path/file access error.
View 5 RepliesActive Directory User and Computers
"MMC could not create the snap-in"
Anybody get this working?
I've googled to no avail
I've tried the Vista fix, registering a bunch of DLLs, but that didn't fix it.
I have encounter a problem where my "Active directory users and computer" function suddenly unable to connect to my remote server. I have run a nslookup and below are the reply
C:>nslookup
Default Server: Unknown
Address: 10.10.2.6
I confirm it is not the next work issue because in the same network there is few more PC running windows 7 and XP, they don't have the problem as I mention. I also have a virtual XP running in the notebook that I am using, So I try to install the adminpak and run the Active directory users and computer and what a surprise it work. I have try to reformat the notebook and the problem still occur after I use it...
I tired of reformatting. Update on the troubleshooting of the problem I am encountering, I find out that the windows 7 that I am running is not able to resolve any PC name on my network. I am mentioning this because went I am using the virtual machine install in the notebook (Win XP) to remote desktop to other PC using the desktop name it is working fine.
Tech Support Guy System Info Utility version 1.0.0.1
OS Version: Microsoft Windows XP Home Edition, Service Pack 3, 32 bit
Processor: AMD Athlon(tm) II X2 245 Processor, x86 Family 16 Model 6 Stepping 2
Processor Count: 2
RAM: 2943 Mb
Graphics Card: NVIDIA GeForce 7025 / NVIDIA nForce 630a, 512 Mb
Hard Drives: C: Total - 238472 MB, Free - 3959 MB; E: Total - 476937 MB, Free - 273517 MB; F: Total - 953867 MB, Free - 865347 MB; G: Total - 476929 MB, Free - 427039 MB;
Motherboard: ASUSTeK Computer INC., M2N68-AM Plus, Rev X.0x, MS1C96B07804918
Antivirus: avast! Antivirus, Updated: Yes, On-Demand Scanner: Enabled
This PC is attached to a network containing several desktops and laptops running Vista. The Samsung laser printer ML-2240 is attachde by USB to this XP PC. Printing over the network operates perfectly with all other PCs. I have just purchased an Acer laptop with Windows 7 and followed the instructions for file sharing, which works perfectly. I have followed the instructions for installing the printer, and received confirmation that it is installed. However, when I attempt to print out of Word 2007 and press the button "find printer" in the Samsung printer profile I get the message "Active Directory Main Services is currently unavailable". I see that this has been found over the years by many people! I am looking for a solution in my context. The rest of the network operates fine still and I can edit the same Word file over the network and print fine.
Is access to Active Directory management done via Snap-In?
View 1 Replies View RelatedI have installed active directory with Server 2003.I have created backup of active directory since a computer (XP) being on the domain.How to restore the backup to AD, since the computer (Xp)?
View 3 Replies View RelatedMy HP Photosmart C7280 All-in-One printer is no longer printing unless I print a test page from within the HP software. I get the following message "The Active Directory Domain Service is currently unavailable" I have completely uninstalled the printer,downloaded new HP software and reinstalled the printer. I am able to scan to my PC. My other printer is fine.
View 4 Replies View RelatedFixing my elderly father's Windows 7/64 desktop. Attempting to print form MS Word to an HP3390 does not give any errors but does not print, either. Attempting to "find printer" from MS Word gives "The Active Directory Domain Services is currently unavailable." I went to services.msc to turn on that service but it does not appear in the list. Driver for the printer is already included in Windows 7, according to the HP support site. Printer is USB connected directly to the computer.
BTW Computer is running MW Word 2003 if that makes any difference.
My assignment is to develop a batch file that our logon script can call on to satisfy the following condition:
If the User Information for Office 2010(HKCUSoftwareMicrosoftOfficeCommonUserInfo) equals the local admin default "UserInfo" then
go to ldap/active directory and, using the client's "logon name", find the client in ldap and use their "Display Name" as the value for the String "UserName" in HKCUSoftwareMicrosoftOfficeCommonUserInfo I found this bit of code to get me started... but this code doesn't "call out to active directory"
reg add HKCUSoftwareMicrosoftOfficeCommonUserInfo /v UserName /d %username% /f
I'm having an issue setting up a Mail Enabled Public Folder. I have the folder created, and anonymous are given proper access to allow incoming messages. My Exchange version is 2010 SP1, full updated, running on a Windows Server 2008 R2 box. Whenever I send a message to the mailbox's address, I get an undeliverable:(url)...#554 5.2.0 STOREDRV.Deliver.Exception:ObjectNotFoundException; Failed to process message due to a permanent exception with message The Active Directory user wasn't found. ObjectNotFoundException: The Active Directory user wasn't found. ##
I know the e-mail address is typed in correctly, but I can't seem to figure out why messages aren't going through. I searched online and found some suggestions, all of which either didn't pertain to our environment, or involved patches...which I have installed.
I have bought Packard Bell IXtreme X8211 (M3720). It has Quad CPU with 4Gig RAM.
Very frequently it freezes for up to 30 seconds. I have notice in Resource Monitor that the Highest Active Time is 100% every time it freezes. The system has a WD EADS SCSI hard drive.
It started this after about 3 weeks I have purchased the system and it is getting more worse over time. turn off the superfetch service, but that did not help.
The computer is suppose to be very fast with multiple cores but it is really become unworkable slow.
When using Windows 7, it randomly goes to the lock screen during an active session. This has been the case on multiple computers running Windows 7. Immediateness proceeding the lockout the screen flashes black and than shows the login screen. All of the external hardware is the same, one computer was a desktop, one is a laptop.
View 2 Replies View RelatedI recently purchased my PC components which include a Corsair 60GB Force Series SSD to use as a boot and application drive. In order to maximize the free space on the SSD I want to move the User Directory from the SSD to the HDD. After looking into this I have found numerous articles which suggest numerous ways to accomplish this.Nearly all of them have people saying that it may cause this or that to go wrong. So what options do I really have? Which method is best (on the list, or found elsewhere)? Is it even worth it (i.e. how much space does the user directory really use)?
View 8 Replies View RelatedDefault user account folder is: "C:UsersMyUser".
How can I change this folder to (for example): "D:MyUser"?
Whenever I try to navigate through my user directory (C:UsersMyName), sometimes it takes ages for the computer to respond. This was happening earlier when I was trying to access AppData so I could fix a GreaseMonkey script. Once the computer "unfreezes" (it doesn't really freeze, as I can use the mouse and other applications that don't have Explorer interfaces open), it seems that I can browse the same directories unimpeded for a time, but this is a regular occurrence, and something must be wrong, or some service that should be running is not.
View 1 Replies View RelatedI just upgraded to Windows 7 and was going through a process of organizing the "libraries" and I noticed (possibly of my own doing but am not sure) that the second drive in my system (B) was sitting there in my user folder. My question is, is that normal? How did it get there and how do I correct it if it isn't suppose to be there.
View 9 Replies View RelatedI'm going to make a clean install of windows 7 and therefor have some question
1)As I want to make a dual boot install with a Linux distribution I thinking about the Partitioning. I want to make following Partitions: [code] Windows 7 also always creates this small 100MB system restore partition. So what would be the best way to prepare these Partions. I would use GParted Live CD to create the Partition in advance, that everything is the way I like it. But I'm not sure if this works without problems for the 100 MB system restore partition (lasts time I got 2 100 MB partitions)
2) I want to move the Users data to a separate partition and found this guides: User Profiles - Create and Move During Windows 7 Installation [2]=User%20Accounts User Folders - Change Default Location(Don't know which one I chose to do so till now) But I see in Windows 7 there are much more useless directories in the users home directory:I've already learned the new Library system, but I still want to use the Users directory. But there is a great mess. Is there a useful/possible way to prevent the directory to mess up with all the sub directories, often created by some apps, don't really using the directory. Or are you just ignore the users home directory? Usually I got about 5 to 8 sub-directories in each Directory for a tidy system to find everything and have a good ordered system.
I'm new on this forum and I'm having a little problem when I try to install a new application, the DAZ 3D. I can't install because Windows 7 shows me this message: There has been an error. Error creating directory C:/Users/?Wagner/AppData/Roaming/DAZ 3D" Something (not me) is putting a question mark (?) before my username.
View 1 Replies View RelatedOne directory (Directory A) containing the same files as Directory B but with the wrong Date created / modified attributes.how to make all the files in Directory A have the same date created/modified attributes as Directory B.
View 7 Replies View RelatedHave a problem with 2-3 directories that I cannot delete. If I try I get the following message: Error 0x80070091: The directory is not empty I have done a disk scan several times now - at first there where some errors, but they should now be fixed.
View 3 Replies View RelatedI have a 10 files that have all been categorised into about 40 folders. These files have been damaged.I have a backup of all these files, but they are not categorised and sit in a single directory.Does anyone know of an easy technique to batch replace the damaged files with the originals?
View 2 Replies View RelatedI am building a new system for a friend. I was wondering how do I enable the setup screen for a first time user after I have installed the OS and updated all the drivers and windows updates? Like how do I make it so that when I give him the system and he turns it on for the first time it'll ask him all the setup info like when you start a new computer for the first time.
View 3 Replies View RelatedIf I run the setup of new program I recently get this error message more and more: Setup was unable to create the directory "C:usersgebrui~1AppDatalocalemp.... Error 5: Acces denied."I looked quite a while around the internet and found some people with exactly the same problem but the solutions didnt work out for me. I tried turning AUC both on and off, I tried running the file as admin (My account is admin also), I even tried to install it with my virus scanner turned off but nothing seems to work?
View 1 Replies View RelatedI know similar questions have been asked but I "might" have a unique one. What I have been trying to do is to copy the "C:Users", "C:Program Files", & "C:Program Files (x86)" to another clean hard drive "D:".I'm doing this to make more room for the OS in the C: drive while date will be in the D: drive. Now I have successfully robocopy Program Files & Program Files (x86). I also have copied most of the Users directory but for this stubborn Realupdate directory. This is I think the real player program. I get this Access Denied and "Error 5" error. I am in elevated command prompt. I achieved this via the Repair your computer prompt on the Windows install DVD.I also have rmdir for Program Files & Program Files and have made a mklink for both of them so windows knows where they will be. But I have not did a full boot because I don't think windows will access my Users directory because they have been moved over to the new drive. What I can only do will have to be via the command prompt.
I can't make a mklink for Users because I get an error saying something about duplicate areas? What I was trying to do is go to this Realupdate directory but even trying to access that directory via cd commands will not work, giving me a access denied. Again I am in elevated command prompt Administrator:X:windowssystem32cmd.exe How can I get to that directory. I just want to delete it now since I have all the files I need. I just want to create a junction point for Users directory linked to the D: drive. I used the following command: mklink "D:Users" C:Users" /JGrant it the D and C are turned around but in Windows Recovery Console it mixes up the drive letters but I know what is the source drive and destination drive. I verified this via the Volume Drive Titles.
I have Dell 15r, which runs on win 7 home basic, i recently started using toshiba hard disk,i have some files in the external hard disk when i try to move them or delete them i will get this kind of error message. Error : 0x80070570 The file or Directory is corrupted and unreadable.
View 1 Replies View Relatedrecently i've been having a problem when trying to move ISO files from one harddrive to another. I've tried with 3 different ISO files and all come up with the same error:"An unexpected error is keeping you from copying the file. If you continue to receive this error, you can use the error code to search for help with this problem.Error 0x80070570: The file or directory is corrupted and unreadable."First time I got this error i just thought something had gone wrong with the download so i deleted the file and downloaded it again. Same problem. This made me think that maybe it was just that download but now I have tried 2 other files and gotten the same error every time. This only happens with ISO files though as in case it was the harddrive or connection issue I tried transferring some other .avi files and they went across without problem.
View 9 Replies View RelatedI have had my system up and running with Windows 7 for at least four or five months. I have four drives in an mATX case. Yesterday, while it was idle, I saw it flash a BSOD and then rebooted. when it restated it displayed the following Error: "No active partition found. Reboot your computer." Which I did several times to no avail. Next, I used the install disk to try to "repair" the partition...seven or ten times, no luck. Also, no drives were listed in the window at repair prompt. So, I pulled all the cables on all the drives but the one containing the system and voilas! here I am writing to you without issue and without three of my drives. I have two other sata drives in addition to my system sata drive. one IDE drive on the system.
View 3 Replies View Relatedi just downloaded dishonored pc game but it comes that unable to execute file in temporary directory setup aborted error 5
View 2 Replies View RelatedI'm running Windows 7 home 64bit processor on my Lenovo laptop. There 3 user profiles. How do I check the last time (not this session) somebody logged into my user profile?
View 2 Replies View RelatedIs it possible to run software on multiple user accounts at same time?Meaning, other user accounts mimic what the main user account does?For example, if I run Calc.exe, multiple 8 by 8, getting 64, and then this is automatically done on all the other user accounts?
View 1 Replies View Related- Windows 7 Pro in a workplace.When a unser logs to a machine for the first time, it takes around 3 minutes to create the profile, it hangs at "Preparing your desktop". After the initial logon, the time is more normal, around 10-25 seconds.What could cause such a long delay to initiate the profile?
View 6 Replies View Related