I have Dell 15r, which runs on win 7 home basic, i recently started using toshiba hard disk,i have some files in the external hard disk when i try to move them or delete them i will get this kind of error message. Error : 0x80070570 The file or Directory is corrupted and unreadable.
View 1 Replies
recently i've been having a problem when trying to move ISO files from one harddrive to another. I've tried with 3 different ISO files and all come up with the same error:"An unexpected error is keeping you from copying the file. If you continue to receive this error, you can use the error code to search for help with this problem.Error 0x80070570: The file or directory is corrupted and unreadable."First time I got this error i just thought something had gone wrong with the download so i deleted the file and downloaded it again. Same problem. This made me think that maybe it was just that download but now I have tried 2 other files and gotten the same error every time. This only happens with ISO files though as in case it was the harddrive or connection issue I tried transferring some other .avi files and they went across without problem.
View 9 Replies View RelatedI am a moron and I messed up the disk partitions on my laptop. I was tryin to increase my Cdisk space by allocating the free disk space from my D. I used this software called "partition magic" and just when everything was going smooth..some error occured and the partition did not take place..to make things worse..I can't acces my D, The error message says "D: is not accessible.The file or directory is corrupted and unreadable."No clue what to do..I NEED to recover my data from my D drive..What should I do?
View 3 Replies View RelatedI got pop up in utorrent says a directory is corrupt, I start to run chkdsk on that drive. In this case in have drive letter E. I click on computer, then go to the drive, right click, properties, tools, check now. It says the drive is need to to forced to dismount. I click on ok. then in computers, the drive just show the letter, not size or disk meter. In the open windows on task bar, I did not see scan disk running, or maybe I accidentally closed because I was switching between several programs.
I thought restart pc the drive will show again, but after restart, the drive does not show up, it says 'E: is not accessible, the file or directory is corrupted and unreadable.' I tried to start pc 2 times, still same. I downloaded Partition Wizard Home Edition (minitool partition wizard home edition 5.2) and running it, it showing my files are still in the drive, but not accessible in windows. I also run chkdsk in recovery environment, but still says disk is corrupt, chkdsk cannot continue.
Up until last friday, my computer worked perfectly fine.Then after i came back from school, i turned on the computer and it went straight to startup repair. I kept receiving messages that said "The file or directory D:Windows is corrupted and unreadable. Please run the chkdsk utility" I let the startup repair work overnight but as i checked today morning, it was STILL going on. I then decided to use the chkdsk /f /r but it did not seem to help. I also tried to install windows again but it kept saying it was corrupted.Currently, i believe that my hard drive is failing(which is sad because i just replaced a failing hard drive about half a year ago that came with this new comp)
View 1 Replies View RelatedI have WD external HD, but to my surprise this evening I could not open it, it only display this message "The file or directory is corrupted and unreadable".
View 2 Replies View RelatedI have IOmega 1 TB hard drive. 2 days ago, my comp restarted suddenly after which my external drive is corrupted.I get the error 'H: is not accessble' The disk structure is corrupted and unreadable.It shows up in the disk management as RAW file system,I have almost 700 GB of important documents, pictures & files that I don't want to lose.Does anybody know of any good recovery software that can help.
View 5 Replies View RelatedWe had an external USB drive with tons of media files on it connected to computer A running Windows 7 Pro SP1. The drive was safely removed and connected to another computer that was running Windows XP Pro 2002 SP3. I was told that the drive was not recognized in XP and that it was disconnected (I cannot say for sure "Safely") and returned to the Windows 7 computer. Once the drive came up I get the following:
K: is not accessible. The disk structure is corrupted and unreadable.
I know every drive fails eventually and I'm not sure how old this drive is. Any utilities to use to try and repair the file structure. I have only tried rebooting the Windows 7 computer and that did not change anything.
I converted an old XP machine to a VHD with disk2vhd. Once imported into virtual pc the machine starts up but fails before booting with the message: missing or corrupted file: system32driverpci.sys
View 1 Replies View RelatedI bought a Transcend USB flash drive in India - 32 GB - unopened packaging - which Transcend later claimed is counterfeit. Using several computers, I cannot access the drive.I cannot format the drive using both W7 and DOS formats on different computers. The format always runs almost to the end and then fails, reporting corrupted directory.I am not trying to recover any data - I only wish to repair (uncorrupt) the directory?
View 7 Replies View Relatedi just downloaded dishonored pc game but it comes that unable to execute file in temporary directory setup aborted error 5
View 2 Replies View RelatedEvery time the computer is turned on or restarted it runs Starup Repair. When i look at the diagnosis it says 'boot critical file c:\ci.dll is corrupt'. I have already tried to restore the computer but i don't have the discs where i have backed up the computer. I have also run a virus scan with Avira and it did pick up 4 viruses and i removed them but the error still occurs.
View 2 Replies View RelatedI have Vista Home Premium 64 bit and I'm trying to upgrade to 7. I bought the college copy so I only have the download, no DVD.
When I get to like 10% of installation I get error 0x80070241, and it says that a file is corrupted or missing and installation cannot continue.
I know everyone hates n00bs who ask questions that have already been answered, and I did google this first (and call Microsoft), but the results I found on google went right over my head and Microsoft was not helpful at all (I shot them off an e-mail thinking I might get better service that way, but they haven't responded yet.)
Anyway, what can I do? I really really want Vista off my computer but it like refuses to die lol.
A few day ago, when I tried to started my laptop (hp probook 4534s), i got disk check. After that when I try to download something i get this error ("The disk structure is corrupted and unreadable") and I cant download it. And when i try to install mozilla firefox i get new 7-zip error ("can not create temp folder archive").
View 1 Replies View RelatedI am installing Windows 7 (Custom installation initiated from Windows XP) but I get the following error message when the installation is on the "Installing updates" step of the installation:
"Setup cannot continue due to a corrupted installation file. Contact the vendor of your Windows installation disc or your system administrator for assistance."
Do you have any idea what the problem may be with the installation? Is there a way to see what file that may be corrupted?
I have tried to burn the DVD in low speed, but the error appears anyway. I have a MSI K8T Neo2-Fir mainboard and the Windows 7 upgrade advisor application says that my hardware is okay for upgrading.
I've got a corrupt file on my TomTom ONE Third Edition. TomTom support has been unhelpful, and Google has let me down for the last 2 hours. I've tried programs like ChkDsk, Move On Boot, Unlocker, and FileASSASSIN.
I am running Windows 7 Ultimate, and the file that needs to be deleted is ttsystem.
I am trying to install Windows 7 32-bit RC on a desktop PC. I have previously used this disk successfully to install the OS on a laptop.
I keep getting an error message to the effect that Windows cannot install required files.
Error code: 0x80070570 Initially I thought that this was due to a flaky DVD drive but I have now installed a different drive and am still getting the same message. I also tried a SATA DVD drive but it seems that the Windows 7 installation process didn't like (have drivers for) this interface
edit:I have previosuly managed to load Windows 7 64-bit RC on this PC but had some problems with stability so thought I would give the 32-bit version a go.
I notice that some people have got around this problem by burning the DVD at slow speeds and by using a USB drive to boot from; since I have successfully installed using this DVD, the former doesn't seem relevant and I don't have an 8GB USB drive available. I will try running MemTest86+ on the system on the off-chance.Any explanations / other suggestions .
ps - I have just downloaded a new copy of Windows 7 32-bit RC, burned it at 1x and have got the same unhelpful error message
I get 0x80070570 error when setup is unpacking
I have read something about it and found some things that can be solutions:No USB plugged in (just tested - doesn't work) No recovery partition (not tested, going to test) 2 GB memory instead of 3 GB
For the latest point I don't know if it will work, because I have 1GB+2GB memory and not 3x1GB. Does it work with 1x2GB? I'm running clean install from upgrade dvd.
Does anyone have other solutions to this problem?
And do the points mentioned above work?
I successfully installed the 32-bit windows 7 on my computer, upgrading it from windows XP. I spent an hour realizing how awesome the new OS is before deciding i needed to reformat to be sure i was rid of all spyware/malware. After trying to do the clean install, I keep getting the "Windows cannot install required files" error right when the install starts "expanding". It goes to 1% and then stops. I am installing this from an ISO off of a 4GB flash drive.Here's what I have tried so far:Redownloading and rewritting the flash drive (several times)Updating the BIOS driversRestarting the installation without a rebootRunning chkdsk on the flash driveNone of these things have worked for me. I know that it has been suggested to set the hard drive (i think..) to SATA or AHCI, but this goes right over my head
View 9 Replies View RelatedWas in the process of backing-up my computer and received the error code that back-up stopped. Details showed error code 0x80070570 was the reason.I did a Google search and came-up with this forum site and I saw a post re the error code but it was referencing it during an install. I was not trying to install anything (even though I have not been able to reinstall Roxio Creator sinceDec) and was wondering if the link (to Uniblue registry software)
View 7 Replies View RelatedWhen installing windows 7 Home Edition 64bit, my computer finishes the "Copying Windows files" in 1 second, and then goes off to the "Expanding Windows files" part. Once it is at 50%(every time), my computer says an error code and a message about corrupt files ect(Error code: 0x80070570). I have been struggling after trying to format my desktop for a clean install of Windows 7 Home Edition 64bit. changing modes from SATA to AHCI, cancelling the install and without rebooting restart the install, and putting down the graphics to 640x480. It has been quite a pain and ruined my weekend and I was hoping that someone else could propose a new solution since nothing has worked. Instead of using a cd, I am using a USB(changing boot priority in the bios to USB, changing the USB to NTFS format ect...), since I currently do not have a SATA CD reader. P.S: The specs of my computer if needed will be posted below:Intel Core i3 540@3.07Ghz eVGA P55v SLI 2x2GB OCZ Platinum DDR3-1600 9-9-9-24 1.35V Dual Channel Palit Sonic GTX 260 Western Digital Caviar Black 500GB 7200RPM 32MB Dual Proc SATA BIOS v02.67?
View 1 Replies View RelatedI always get this error while installing Windows 7 Professional x64 OEM on a system I just built. It always occurs when about 16% done expanding files.
Specs of this system:
Intel Core i3-540
PNY 1333MHz DDR3 2x2gb
EVGA H55V
Seagate Barracuda 7200.12 250GB
LiteOn SATA 24x internal CD/DVD writer
CoolerMaster Elite 300 Case
CoolerMaster Elite 460W PSU
At the time of installation, an error # 0x80070570 occurs on the expanding files stage. This error states that the files are corrupted or missing.
View 3 Replies View RelatedI am building a 64bit system from scratch. At the time of windows 7 installation, after 9% completion, it is giving error# 0x80070570
Any advice will be much appreciable?
We have new HP 635 Laptops that had Win7 64 bit Ultimate loaded on them. With our Volume License agreement we load Win7 Enterprise 64 bit. I downloaded the software from the Microsoft site several times. Have tried to burn the disks at slower speeds. The Laptop Bios will not let me change the settings for the Sata drive so that is not a choice. It get 95% into the Expanding Windows files and stops. I have checked the memory and the hard disk with the Win7 dvd and they were fine. Don't know what to try.
View 1 Replies View RelatedWell, I think it's my computer. Basically, I video'd something the other day on my panasonic camera, and when I went to turn it off, it said something like "Could not save file as speed of SD card is not available" or something like that.. But when I went to put the rest of my videos on my computer that file was on the SD Card, so I tried to add it to my computer... This was when the error code 0X80070570 and it said "The file or directory is corrupted and unreadable... But I tried to play it on Windows Media Player and it plays fine... THe only thing different is on the seek bar thingy it comes up with 00:00 so you can't go forward or backward, but it still plays fine... If possible I would really like to fix the error, because the corrupted video is something that I'd ideally like to have.
View 1 Replies View RelatedI am getting the error code 0x80070570 Everytime I try and install Windows 7. I am trying to do a custom install so it cleans out the computer. I have Windows 7 Pro OEM 32bit. I have the requirements it takes to put Windows 7 on a computer. I have tried two different discs same results. System is custom built, with Gigabit GA-H55M-S2H motherboar, Intel core i3, 4gb Memory, 500gb hdd. It gets past the part of coping files and then comes up with the Error code of 0X80070570. I have tried to install several times using two different discs and allways the same result.
View 5 Replies View RelatedI bought my HP Pavilion dm4 about a month ago and until recently, it had been working great and really fast while on the internet. Then lately, it started to load normal pages at half its speed, taking time to even load google. When playing MMOs like World of Warcraft, I was a lot laggier than i normally am, dropping framerates by 30-40 per second, even though my task manager said nothing else was running in the background. I thought something was wrong and my suspicions were correct after i found my WoW account to be hacked. I managed to recover my account and change the user/pass but my computer was still slow so i suspected that it was a virus.I uninstalled Norton Antivirus because it couldnt pick up on anything and got Sunbelt Vipre to try and solve the issue. Unfortunately, Vipre didn't pick up on anything either. I wanted to try to System Restore to remove any sort of keylogger or virus that was causing my computer to be so slow and hack my accounts. But when I tried to do the restore, picking the nearest restore point, it was stuck at "Initializing System Restore..." for nearly 3 hours. I had to hard reset the computer and try again at a different restore point, but I got the error message, "System Restore did not complete successfully. Your computer's systems files settings were not changed. The file or directory is corrupted and undreadable (0x80070570)." Then after clicking Run System Restore it gives me the error message "There was an unexpected error: Catastropic failure (0x8000FFFF)" I've also tried the following:-CheckDisk in safe mode, using command prompt as admin, and checkdisk at startup (this one took the longest, nearly 4 hours, and when i woke up the next morning i hadnt seen any changes)-Defrag in safe mode and normal (either way it would get stuck on 79% Analysis and then freeze), I managed to get defrag to work after a few resets and after disabling my antivirus/firewall. Still it did not make a difference and I was still unable to System Restore.-SFC using command prompt as adminPlease help as I really cannot afford to buy another computer and other than the fact that it is running at half its speed and cannot system restore, the computer is able to function normally.
View 4 Replies View RelatedBeen getting this error for the past few days. I have tried just about every recommendation I've seen on this error; Ive gone through 8 sticks of RAM, multiple ISO's and burns, USB install, different DVD drives, removing all extra USB devices, 2 video cards, multiple HDD's, canceling the install before it errors out and then restarting, all without luck. Anybody have any other ideas? Using a Maximus IV Extreme Z, no overclock.
View 9 Replies View RelatedAt the file expansion stage, error code 0x80070570 appears and my installation fails. I installed 7048 from a DVD burned image 2 weeks ago and it worked fine. Downloaded 7057 and durned the .iso to DVD and when trying to install to formatted partition this error appeared. Since then I can't re-install 7048 either! This is driving me crazy, I've tried different DVD drives, re-burned the .iso's at slow speed, but no luck.
View 9 Replies View Relatedi try to backup my data to an external usb-disk. as soon as the backup software wants to write to the disk an error 0x80070570 is displayed.
i can access this disk without problem and i also use it for storing the system images. the strange thing is that i managed to do a single backup to this drive yesterday. btw the same error is shown when i want to backup to a dvd-ram.
