i try to backup my data to an external usb-disk. as soon as the backup software wants to write to the disk an error 0x80070570 is displayed.
i can access this disk without problem and i also use it for storing the system images. the strange thing is that i managed to do a single backup to this drive yesterday. btw the same error is shown when i want to backup to a dvd-ram.
I am trying to install Windows 7 32-bit RC on a desktop PC. I have previously used this disk successfully to install the OS on a laptop.
I keep getting an error message to the effect that Windows cannot install required files.
Error code: 0x80070570 Initially I thought that this was due to a flaky DVD drive but I have now installed a different drive and am still getting the same message. I also tried a SATA DVD drive but it seems that the Windows 7 installation process didn't like (have drivers for) this interface
edit:I have previosuly managed to load Windows 7 64-bit RC on this PC but had some problems with stability so thought I would give the 32-bit version a go.
I notice that some people have got around this problem by burning the DVD at slow speeds and by using a USB drive to boot from; since I have successfully installed using this DVD, the former doesn't seem relevant and I don't have an 8GB USB drive available. I will try running MemTest86+ on the system on the off-chance.Any explanations / other suggestions .
ps - I have just downloaded a new copy of Windows 7 32-bit RC, burned it at 1x and have got the same unhelpful error message
I get 0x80070570 error when setup is unpacking
I have read something about it and found some things that can be solutions:No USB plugged in (just tested - doesn't work) No recovery partition (not tested, going to test) 2 GB memory instead of 3 GB
For the latest point I don't know if it will work, because I have 1GB+2GB memory and not 3x1GB. Does it work with 1x2GB? I'm running clean install from upgrade dvd.
Does anyone have other solutions to this problem?
And do the points mentioned above work?
I successfully installed the 32-bit windows 7 on my computer, upgrading it from windows XP. I spent an hour realizing how awesome the new OS is before deciding i needed to reformat to be sure i was rid of all spyware/malware. After trying to do the clean install, I keep getting the "Windows cannot install required files" error right when the install starts "expanding". It goes to 1% and then stops. I am installing this from an ISO off of a 4GB flash drive.Here's what I have tried so far:Redownloading and rewritting the flash drive (several times)Updating the BIOS driversRestarting the installation without a rebootRunning chkdsk on the flash driveNone of these things have worked for me. I know that it has been suggested to set the hard drive (i think..) to SATA or AHCI, but this goes right over my head
View 9 Replies View RelatedWas in the process of backing-up my computer and received the error code that back-up stopped. Details showed error code 0x80070570 was the reason.I did a Google search and came-up with this forum site and I saw a post re the error code but it was referencing it during an install. I was not trying to install anything (even though I have not been able to reinstall Roxio Creator sinceDec) and was wondering if the link (to Uniblue registry software)
View 7 Replies View RelatedWhen installing windows 7 Home Edition 64bit, my computer finishes the "Copying Windows files" in 1 second, and then goes off to the "Expanding Windows files" part. Once it is at 50%(every time), my computer says an error code and a message about corrupt files ect(Error code: 0x80070570). I have been struggling after trying to format my desktop for a clean install of Windows 7 Home Edition 64bit. changing modes from SATA to AHCI, cancelling the install and without rebooting restart the install, and putting down the graphics to 640x480. It has been quite a pain and ruined my weekend and I was hoping that someone else could propose a new solution since nothing has worked. Instead of using a cd, I am using a USB(changing boot priority in the bios to USB, changing the USB to NTFS format ect...), since I currently do not have a SATA CD reader. P.S: The specs of my computer if needed will be posted below:Intel Core i3 540@3.07Ghz eVGA P55v SLI 2x2GB OCZ Platinum DDR3-1600 9-9-9-24 1.35V Dual Channel Palit Sonic GTX 260 Western Digital Caviar Black 500GB 7200RPM 32MB Dual Proc SATA BIOS v02.67?
View 1 Replies View RelatedI always get this error while installing Windows 7 Professional x64 OEM on a system I just built. It always occurs when about 16% done expanding files.
Specs of this system:
Intel Core i3-540
PNY 1333MHz DDR3 2x2gb
EVGA H55V
Seagate Barracuda 7200.12 250GB
LiteOn SATA 24x internal CD/DVD writer
CoolerMaster Elite 300 Case
CoolerMaster Elite 460W PSU
At the time of installation, an error # 0x80070570 occurs on the expanding files stage. This error states that the files are corrupted or missing.
View 3 Replies View RelatedI am building a 64bit system from scratch. At the time of windows 7 installation, after 9% completion, it is giving error# 0x80070570
Any advice will be much appreciable?
We have new HP 635 Laptops that had Win7 64 bit Ultimate loaded on them. With our Volume License agreement we load Win7 Enterprise 64 bit. I downloaded the software from the Microsoft site several times. Have tried to burn the disks at slower speeds. The Laptop Bios will not let me change the settings for the Sata drive so that is not a choice. It get 95% into the Expanding Windows files and stops. I have checked the memory and the hard disk with the Win7 dvd and they were fine. Don't know what to try.
View 1 Replies View RelatedWell, I think it's my computer. Basically, I video'd something the other day on my panasonic camera, and when I went to turn it off, it said something like "Could not save file as speed of SD card is not available" or something like that.. But when I went to put the rest of my videos on my computer that file was on the SD Card, so I tried to add it to my computer... This was when the error code 0X80070570 and it said "The file or directory is corrupted and unreadable... But I tried to play it on Windows Media Player and it plays fine... THe only thing different is on the seek bar thingy it comes up with 00:00 so you can't go forward or backward, but it still plays fine... If possible I would really like to fix the error, because the corrupted video is something that I'd ideally like to have.
View 1 Replies View RelatedI am getting the error code 0x80070570 Everytime I try and install Windows 7. I am trying to do a custom install so it cleans out the computer. I have Windows 7 Pro OEM 32bit. I have the requirements it takes to put Windows 7 on a computer. I have tried two different discs same results. System is custom built, with Gigabit GA-H55M-S2H motherboar, Intel core i3, 4gb Memory, 500gb hdd. It gets past the part of coping files and then comes up with the Error code of 0X80070570. I have tried to install several times using two different discs and allways the same result.
View 5 Replies View RelatedI bought my HP Pavilion dm4 about a month ago and until recently, it had been working great and really fast while on the internet. Then lately, it started to load normal pages at half its speed, taking time to even load google. When playing MMOs like World of Warcraft, I was a lot laggier than i normally am, dropping framerates by 30-40 per second, even though my task manager said nothing else was running in the background. I thought something was wrong and my suspicions were correct after i found my WoW account to be hacked. I managed to recover my account and change the user/pass but my computer was still slow so i suspected that it was a virus.I uninstalled Norton Antivirus because it couldnt pick up on anything and got Sunbelt Vipre to try and solve the issue. Unfortunately, Vipre didn't pick up on anything either. I wanted to try to System Restore to remove any sort of keylogger or virus that was causing my computer to be so slow and hack my accounts. But when I tried to do the restore, picking the nearest restore point, it was stuck at "Initializing System Restore..." for nearly 3 hours. I had to hard reset the computer and try again at a different restore point, but I got the error message, "System Restore did not complete successfully. Your computer's systems files settings were not changed. The file or directory is corrupted and undreadable (0x80070570)." Then after clicking Run System Restore it gives me the error message "There was an unexpected error: Catastropic failure (0x8000FFFF)" I've also tried the following:-CheckDisk in safe mode, using command prompt as admin, and checkdisk at startup (this one took the longest, nearly 4 hours, and when i woke up the next morning i hadnt seen any changes)-Defrag in safe mode and normal (either way it would get stuck on 79% Analysis and then freeze), I managed to get defrag to work after a few resets and after disabling my antivirus/firewall. Still it did not make a difference and I was still unable to System Restore.-SFC using command prompt as adminPlease help as I really cannot afford to buy another computer and other than the fact that it is running at half its speed and cannot system restore, the computer is able to function normally.
View 4 Replies View RelatedBeen getting this error for the past few days. I have tried just about every recommendation I've seen on this error; Ive gone through 8 sticks of RAM, multiple ISO's and burns, USB install, different DVD drives, removing all extra USB devices, 2 video cards, multiple HDD's, canceling the install before it errors out and then restarting, all without luck. Anybody have any other ideas? Using a Maximus IV Extreme Z, no overclock.
View 9 Replies View RelatedAt the file expansion stage, error code 0x80070570 appears and my installation fails. I installed 7048 from a DVD burned image 2 weeks ago and it worked fine. Downloaded 7057 and durned the .iso to DVD and when trying to install to formatted partition this error appeared. Since then I can't re-install 7048 either! This is driving me crazy, I've tried different DVD drives, re-burned the .iso's at slow speed, but no luck.
View 9 Replies View RelatedI have a dell 1525 laptop...and i was tryin to install windows 7 ..but at the file extraction point a blue screen appears with the following error code 0x80070570 ..
View 6 Replies View RelatedI got a original windows 7 ultimate CD and during the upgrade it gives below error code
Windows cannot install required files. The file may be corrupt or missing. Make sure all files required for installation are available, and restart the installation. Error code: 0x80070570
How do i complete to installation.
I have tried to do a system restore to a point previously with another problem, but get the message 'Can't system restore, file or directory is corrupted and unreadable (0x80070570).'
This applies to all restore points available. I have tried System Repair, but that found nothing.
when I want to install my OS (Windows 7 home premium 64 bit - CD bought from store) on my SSD, I get the error 0x80070570 - corrupt files during the "Expanding Window files" process. I have used that CD to install on my previous PC with no problem.Thinking the CD was the problem, I downloaded a ISO and burned it with PowerISO Tried installing and same problem happens.eading on the internet from multiple forums, some mentioned trying with a 2gb ram stick only. Not having a 2gb stick, i still tried removing one of them (4gb sticks).Doing that i managed to complete installation until the "Completing..." part of the install, at which step computer crashed with a BSOD.
Here is a summary of things I have tried:-2 different ISO-Installing on my HDD-Clearing CMOS-Restoring BIOS to default-Trying 1 stick of RAM (4gb)-Transferring SSD on working computer, installed Windows, then transferred to new computer using Sysprep Recently I Flashed my BIOS with the most recent update (Z68BFC15.BST). I managed to install windows and drivers, but when i add my 2nd stick of RAM (total 8gb) computer won't boot (BSOD at windows loading page).Is it hardware problems?
I Have a Pavilion a6457c Desktop that I have been trying to put a copy of win 7 on that i bought from my school and I keep coming up with this error 0x80070570. Unfortunately I don't have a recovery disk or drive, (I wiped it when I first tried the upgrade, I know, stupid move on my part).. what can i do to get this thing working again,
View 5 Replies View RelatedError code: 0x80070570 during installation 7100 x86
View 2 Replies View RelatedI have Dell 15r, which runs on win 7 home basic, i recently started using toshiba hard disk,i have some files in the external hard disk when i try to move them or delete them i will get this kind of error message. Error : 0x80070570 The file or Directory is corrupted and unreadable.
View 1 Replies View Relatedrecently i've been having a problem when trying to move ISO files from one harddrive to another. I've tried with 3 different ISO files and all come up with the same error:"An unexpected error is keeping you from copying the file. If you continue to receive this error, you can use the error code to search for help with this problem.Error 0x80070570: The file or directory is corrupted and unreadable."First time I got this error i just thought something had gone wrong with the download so i deleted the file and downloaded it again. Same problem. This made me think that maybe it was just that download but now I have tried 2 other files and gotten the same error every time. This only happens with ISO files though as in case it was the harddrive or connection issue I tried transferring some other .avi files and they went across without problem.
View 9 Replies View RelatedI have this problem with my Toshiba laptop: Several days ago my com crashed, when I started my computer on the very beginning on start up screen when it says windows is starting I get a 1 second blue screen with some saying and my laptop restarts by it self. So, ok I have Windows 7 Ultimate installation dvd and i tried to install it,everything goes well untill on the second line of the very beginning of windows installation 98% I get this message Error Code: 0x80070570.
I've read some forums people were saying that this could be a RAM problem,so,ok my toshiba have 2 RAMS x 2 Gb..so i taken out 1 tried to install-same error, put in another slot-same error,replaced and putted my other Ram Memory in the slots same again. So,is there any solution how to fix this?i can see in bios that bios is reading my HDD,not sure if its working,does that mean that if BIOS is recognizing my Laptops HDD that works 100%?
If you just want the solution page down .. it's in this blue
New shiny windows 7 disk arrives. ...... doesn't want to install ...
keep getting error message 0x80070570 when Windows 7 is expanding files:
Quote: Windows cannot install required files error 0x80070570
The file may be corrupt or missing.. Make sure all files required for installation are available and restart installation. Spend an hour googling .. people suggest RAM problems .. I know my RAM is good but spend an hour or two running MEMTEST ...
Then I see a lot of people reduced to trying to install from a USB key .... great .... borrow my neighbours 4GB Cruzer, follow instructions, ... and bork it in the process of not installing the OS.
So eventually I call Microsoft and speak to a very nice lady in India who runs me through a dozen or so workarounds for this .. I'm pressing control +F keys left, right and centre, taking out RAM sticks, disabling EVERYTHING in BIOS.
Always the same thing:
Quote: Windows cannot install required files error 0x80070570
The file may be corrupt or missing.. Make sure all files required for installation are available and restart installation. So after maybe two hours on the phone with her she decided to report the issue to the second line team. I'm told they will call me back today as they don't work weekends (all this took place Friday up til now).
EASY SOLUTION:
I don't wait weekends for answers (nor do I usually need to call tech support). One thing we had noticed is that the repair console refused to lauch because it said there was an install in progress. But the support didn't pick up on this and it wasn't until Saturday morning I tried what turned out to be the easiest solution ever.
When you see the error "0x80070570 can't access files" on install click --> Cancel ---> you will be returned to the "Install Now" startup screen and - WITHOUT REBOOTING - just re-start the install.
Second time round it went smooth as clockwork and installed fine. I have not tried to reproduce this error as I just want a working system:
Be interested to know if this easy solution works for anyone else. I informed Microsoft of it when their engineer called today and they are going to look into it. They are aware of the install issue but never heard of this fix before.
such as i wrote in the title i get error 0x80070570 when i try to install Windows 7
this the first time i face this problem because i install Windows 7 many times before on the same computer
the problem start with blue screens when i already have a Windows 7 so such as many people do i backup all my files and format C partition Then when i install Windows 7 i 0x80070570 problem so i format all of my hard disk and again i got this error
i tried alot of Solutions but all of them did not solve the problem
i tried to use system recovery options but it unavailing and it tell me boot Manager is missing or corrupt so i tried many commands like bootsect/nt60 and also no luck
now what can i do to solve this problem , can any one help me please ?
i have built my computer with new parts and the installation stalls returning the errror code: 0x80070570
View 1 Replies View RelatedSo I have spent the last few days troubleshooting the problem, I have tried most of the solutions I have found online, but still I get the 0x80070570 error at 14% of the install process. I have reformatted the hd prior to trying as well.some random observations:I have run hd diagnostics and everything passedI notice that in the BIOS setup utility that there are 3 SATA HDDs listed though I only have the one 'internal one' and no peripheralsI have downloaded and burned (and burned to USB) the .ISO file about five times with the same resultI haven't tried removing RAM because I only have one chip (4 gb) and I assume I cant have 'no' RAM to proceedAs I am sure you can imagine, it is driving me absolutely crazy.
View 8 Replies View Relatedi am receiving error 0x80070570 at "expanding files" in the windows 7 installation at around 30% into it. Its an attempt to install windows 7 via boot-able usb flash drive.now something i should mention is that this is a completely new built computer, i built it a couple of days ago[CODE]
View 3 Replies View RelatedError 0x80070017
keeps coming up when I install my windows 7 disk. I've used two different disks and the same error occurs, though at different levels of completion. I've searched the forums and come to the conclusion that either my memory isn't good for this board, or it is the hard drive that i'm installing to. When I start it hangs at 0% expanded and about two mins later it gets to about 72% expanded and then the error occurs. The first disk i used only got to 39%. I've ran a memory diagnostic and currently have no access to a USB boot disk.
Does anyone know what would cause the following backup error?
The backup was not successful. The error is: Windows Backup encountered a problem while determining additional locations of one of the users included in backup. (0x81000038).