Windows 7 On MAC Boot Camp Partition No Sound?
Jun 11, 2010
I have an audio problem that I can't figure out.I installed Windows 7 on a Boot Camp partition in my 13" Mac Book. The Mac is not a Mac Book Pro. Its an Aluminum Uni-Body Mac Book purchased new in December 2008. The Mac partition has MAC OS 10.5.5 loaded on it. I have been told by several Apple geniuses that there is no such thing as this model so let me clarify that there is. It has no fire wire port and no back lit keys.
The problem is no sound when booted into Windows 7. Nothing out of the speakers and nothing out of the headphone jack. Audio works fine when I am booted into the MAC OS. I have not tried SPDIF as I have nothing to test it with. In Device Manager everything is fine, working normally and enabled. Speakers Properties are all set to default - 16 bit 44.1Khz sampling rate. Both Exclusive Mode boxes are checked. Enhancements are all off, level is up and balance is at 50 % Left/Right.
[code]...
View 3 Replies
ADVERTISEMENT
Aug 23, 2012
I have a Boot Camped Mac Mini with Windows 7. I recently needed to allocate more disk space to it as i only had a gig left, i booted into MacOS and used Disk Utility to make the Mac partition smaller, i rebooted into windows and downloaded software called 'Partition Wizard' from www.partitionwizard.com. I dragged the Windows partition all the way so that it used up all the Unallocated Space, it required a reboot to finsih and when it did it displayed an error such as thistatus:0xc0000255Info: The Windows Boot Configuration Data file is missing required informationI have the Installation Disk and i have tried repairing more than 3 times and it seemed to do nothing, so i tried using the CMD and bootrec.exe and now when i start the repair wizard it says there is no windows partition yet i can still try repairing things (Yet still does not repair anything). I downloaded EasyBCD but im on my Mac partition right now and its an exe, i have no clue how to run that within windows to try and repair the Bootloader. I do however have access to the BOOTCAMP partition through the mac side, and i can access all the files. Is there some way i can repair the bootloader through this?
View 6 Replies
View Related
Aug 9, 2011
I have been using boot camp to use Windows programs for a while now, and just recently, I tried to boot up and it now wants me to set up the computer again.
View 3 Replies
View Related
Apr 9, 2012
as the title itself described, I wanna know if I can install Windows 7 on a apple mac without using boot camp or any virtualization. I meant a clean installation as we do on our desktops and notebooks
View 2 Replies
View Related
Feb 6, 2011
Current state: I have a Dell with Vista HP 64 that hangs alot Near Future State: I fought this problem on my Dell PC / Windows Vista for sometime now and I'm fed up. I'm going to get a iMac and use boot camp to have both Mac OS (Snow Leopard) and Windows 7. Best of both worlds on superior hardware (my and other's opinion, not my point though).Here's my question: I think I'm going to buy Windows 7 Home Premium 64 bit full installation (not upgrade) and use that to "upgrade" my Dell with Vista. Then when I get the iMac, I will use that same product to do a new installation of Windows 7 on the iMac (and decommission the Dell).Is this the right approach? I don't think Windows 7 upgrade will work for the iMac part of the plan. Is this true? Will I be able to "move" Windows 7 full install from Dell to iMac?
View 1 Replies
View Related
Dec 19, 2012
I'm building a new computer. Can I partition the hard disk, copy my laptop HD to boot from one partition and run a new windows 7 pro os from the second partition?
View 5 Replies
View Related
Aug 29, 2012
I'm a long-time reader but new poster. I am currently running Windows 7. I want to install Windows XP onto another disc and have a dual-boot setup. I keep Windows 7 up to date and secure, but for the XP partition, I would rather not have antivirus running or even installed, in order to limit background processes. I will not be logging into any place or making any credit card purchases when booted into Windows XP. It will just be used for surfing, games, etc. Further, if and when XP becomes compromised or buggy, I will simply overwrite the partition with a backup image.
If I use Bitlocker to lock down the Windows 7 partition (with the encryption key on a thumb drive) and boot into Windows XP, am I correct in thinking the XP installation see or can't access the Windows 7 partition? If XP gets compromised, can a virus access or write to the Windows 7 partition?
Is there any other reason why this would not be secure? Can a virus write to the BIOS?
View 4 Replies
View Related
Dec 25, 2012
this is what I did, since I have no CD-ROM, to install Windows 7 I created a partion X: NTFS and set it as the ACTIVE ONE, the put there the Windows 7 installation files, and opened prompt command to type bootsect.exe /n60 X: , next I restarted my computer, and automatically it booted into the Windows 7 setup, I installed Windows 7 on the partition C: and formatted the partition C:, everything installed and after the installation finished, a multiple choice menu appears that reads:[CODE]
View 6 Replies
View Related
Dec 18, 2012
I have Windows 7 ultimate 64-bit installed on DELL desktop (Optiplex 990) i7 Core. I have two HDD: Disk 0 contains the operating system 500GB. and Disk 1 empty 1TB.
I want to make a partition on disk 1 to mirror the operating system partition and keep the remaining for data storage. I tried to do but I had the following error message: "All disks holding extents for a given volume must have the same sector size, and the sector size must be valid."
I tried to attach a screen shot but couldn't.
View 5 Replies
View Related
May 24, 2011
I currently have Windows 7 64 bit installed in two partiions:C: drive and E drive. Everytime I start, windows from the C: partition automatically boots. How do I get the Windows from E drive to boot? Ultimately I'd like to use the windows from E drive (which has all my installed software) and delete the one from C: drive. The problem is that I installed the one on C: drive most recently. (Long story short, I tried to delete and old version of windows unsuccessfully, and had to unmount and reformat the partition.)When I go to System Configuration under the Boot tab, I only see Windows in one partition (C: drive), so it won't allow me to delete that.
View 2 Replies
View Related
Jun 21, 2012
I normally run Windows 7. Today I decided to try out Windows 8 as well. I went into Disk manager and created a partition. I then booted off of my Windows 8 DVD and installed it on that partition. Now, my computer is only booting into Windows 8. What I really want is an option to choose which OS to boot into, but I would really like to be able to get back to Windows 7.
View 3 Replies
View Related
Oct 21, 2009
Last night i completed my installation of Windows 7, on new Harddrive.
The disk is partioned in 3 partitions (C,D,E)
C = WinXP
D = Windows 7
E = Data
I started with Windows 7 installation (on partition D). Last night it was completed.
I then format my partition C: and now I can't boot up to Windows 7.
My installation is on a USB.
What can i do??
View 9 Replies
View Related
Oct 1, 2012
I installed Windows 7 on my second hard drive g: (1st partition drive 1) and Windows set up a dual boot with Windows XP on the C: drive (1st partition drive 0) and Windows 7 on the G: drive (1st partition drive 1). Everything worked fine for months until I decided to dump Windows XP to try out Windows 8. I created an Win 8 installation USB FOB. I deleted the old XP Partition on C: then the install failed and I could not boot, (c: was deleted).No problem (I thought), I just swapped the hard drives to boot off my Windows 7 partition. Surprise! It won't boot either. I tried using partition Wizard to repair the MBR, from another computer. That didn't workThen I created a Windows 7 installation USB FOB (no CD drive on target computer), to see if Windows repair would take care of the problem. It could find no Windows installation. So I selected start up repair, it ran for a few minutes then said it was going to reboot, so I pressed the finish button.[CODE]
View 2 Replies
View Related
Nov 12, 2009
This tutorial describes how to install Windows XP and Windows 7 on the same partition (first tutorial for one partition written).The short concept: Install XP twice and have 7 replace the first installation.Need more testers to confirm it works for everyone and the instructions are clear enough.Requirements: Both Installation discsA Windows XP LiveCD (might work with other OS, but no guarantees)EasyBCD.Install Windows XP normally if you're not already running it.Don't bother installing any drivers or software on it.Start another installation of Windows XP. Choose the same hard drive and leave it unchanged without formatting. When it asks you what to do then choose to install in a different directory "C:Windows.xp".Finish installing that one and only the necessary drivers.afterwards.Install Windows 7 on C: over the regular C:windows. A warning will tell you that it will move the old files to "Windows.old" directory. The good thing is it doesn't touch the Windows.xp directory.Install and run EasyBCD. Go to "Add/Remove Entries" and add an entry of "Windows NT/2k/XP/2k3" type and a name of your choice. (as shown in the attached image)Don't forget the "Save" button.You may also want to adjust the loader timeout from "Change Settings".In C: you will find a (hidden) file "boot.saved". Open it, remove the entry to the "WINDOWS" directory and make the "WINDOWS.XP" your default one (if it's not) and save as boot.ini".Restart and boot from the Windows XP LiveCD (which you should have burned and tested on CD or DVD before starting).Open the Command Prompt (Run "cmd") and enter the following lines in order
[code]...
View 9 Replies
View Related
Jan 10, 2012
I installed Win7 on the same Partition as WinXP. I was in a hurry and forgot totally to partition the HD before I installed, was doing 100 things on the side during the Installation, and noticed my mistake only after the install was complete. Is there any way I can do a Multi boot for those two OS now? The WinXP folder has been renamed to Windows.old, and even with EasyBCD there's no way I can get the Comp to boot into WinXP.
View 2 Replies
View Related
Apr 4, 2012
I recently installed a 90GB Kingston Technology SSD and then created a shadow copy of my previous hard drive (which was 62.4GB), meaning that currently I only have access to this amount of space on the new hard drive.
resize this boot partition to allow me to use all the space currently unallocated?
View 9 Replies
View Related
Sep 19, 2012
So long story short, my current os (w7) is installed on a non-boot partition of a now internal drive that used to be external. This wasn't an issue/I didn't notice because I had another unused internal hdd which DID have an old bootable os partition, and then I'd just choose the correct instance of Windows when that one booted.I have to get rid of the old HDD with the bootable partition. Is there anyway I can change the non bootable my currant OS is on to a bootable partition (ie thru windows, cmd, bios etc)
View 7 Replies
View Related
Jan 8, 2013
My Old HDD crashed, it had windows 7 x64 on a D: logical drive with an extended partition. My old HDD also had two other primary partitions one of which probably had some system/boot files etc,. I do not have a backup of these two primary partitions, however, I do have a paragon backup of my logical drive D: extended partition. I got me a new HDD, created a new NTFS primary partition with a drive letter C:. I then restoed the paragon backup of my windows D: drive on to this new primary C: partition. Now, I am not able to boot windows 7. Seems like I need to create a new system partition with boot files to be able to boot my Win 7.
View 7 Replies
View Related
Sep 7, 2011
Is there a way to install Windows 7 in a different folder than the default Windows and on a different partition than the boot. For example, I have XP installed on my Laptop that has 3 partitions C:, D:, E:. C: is my boot partition and D: is where I have XP install in directory D:OSWINXP and E: where applications are installed and data is store.
I like to install Windows 7 and have C: as the boot drive and install it on D: in the sub directory D:OSWindows or D:OSWindows 7.
View 3 Replies
View Related
Jan 9, 2012
I installed DOS into 2GB FAT 16, then installed Windows 7 Ultimate expecting Windows 7 to install itself in a partition with a drive letter other than C (just as XP had done in a previous dual-boot setting with DOS) But no, Windows 7 has hijacked the C drive letter for itself. How can I stop Windows 7 from "stealing" from DOS, the drive letter C, for itself?
View 5 Replies
View Related
May 1, 2010
I tried resizing my C drive but got an error message. It said something about dynamic discs ??after that when i tried to restart my hp laptop i got this error message:The message on boot states "windows failed to load. A recent hardware or software change may be the cause."The status is "Oxc000000f".The description is "The boot selection failed because a required device is inaccessible"what can i do to fix this problem? i am running check disc like the system suggested, but if it doesn't give me a solution will i need to re install or recover Windows 7 with my back up discs or using HP's system recovery?
View 5 Replies
View Related
Aug 15, 2012
I want to have a boot partition, system partition and have a separate storage partition for all of my files. I am a bit confused about the boot partition/system partition relationship and still haven't found any clear or concise info to tell me how I would go about creating this. I have already partitioned the HDD into three sections and have already installed Win7. The active partition is also the boot AND system partition.
View 4 Replies
View Related
Feb 20, 2013
I have a Dell laptop which came preinstalled with Windows 7. I wanted to create a new partition and put XP on it to allow me to run a piece of older software. I created the partition and managed to install XP on it as planned. XP runs but unfortunately it hasnt found all the drivers for the ethernet and wireless cards so i cannot connect to the internet.Anyway, now i cant boot from the Windows 7 partition. I have had a look around and things seem to suggest downloading a program to restore the Master boot record-however i cant do this as i cannot connect to the internet in xp. My laptop also did not come with windows 7 disks so i cant restore the MBR in this manner either. Is there anyway i can restore the MBR in my current situation? I dont have another computer so cant download anything elsewhere (currently writing this from ipad). Am i able to delete the xp partition and force windows 7 to load instead? Or can i use the xp cd to somehow access Dos and boot windows 7?
View 7 Replies
View Related
Jun 23, 2011
I would like to make my PC dual-boot with Windows 7 Home Premium 64bit version & Linux Ubuntu. I know about Wubi to install Ubuntu within Windows, But would like more space than the 30gb limit that Wubi uses. How do I create an partition with Windows that can be used for a dual-boot. doctorwhovian11-24144041650249291689021989539000 has chosen the best answer to his/her question. Click here to view the answer that was selected.
View 5 Replies
View Related
Sep 12, 2012
i cannot boot my Windows 7 64 bit Dell Studio 1558.Cannot boot to Windows.Error(s)BOOTMGR IS MISSING , CTRL + ALT + DEL TO RESTART. Description:
1. Initally had two partitions .. C and D ..
2. Tried to merge C and D to make C more by using Partiton Wizard.
3. Computer Restarted.
4.BSOD at Starting windows logo
5. Stuck at boot.
6. Launched Windows repair.
7. Unable to do repairs.
8. Dell restore unable to locate present installation. ( "current installation : (Unknown) at Unknown drive)
9. Checked partitions using DISKPART at command prompt.
10. Tried to change active partition . Restarted.
11. BOOTMGR MISSING ERROR. Dont even go to startup repair.
12. DVD DRIVE of LAPTOP NOT WORKING so made Windows Startup repair USB bootable.
13. Now have Access to Recovery Menu.
14. Made Partition Wizard Bootable USB . Now have access to Partition Wizard Also.
15. Tried installing Windows 7 using USB. Got error "installation error. verify windows sources are accessible Windows 7 Instalation Problem - Error Code 0xC0000005.
16. Stuck at boot now.
I checked OS drive in partition wizard bootable , it is intact..Windows installation is there....Every drive is ok but somehow booting not from that drive.I will attach photographs of Partition Wizard Partiton status.
View 2 Replies
View Related
Oct 9, 2011
I was trying to get a dual boot setup of Windows 7 and Ubuntu where I had 1 partition for Windows 7, another for Ubuntu, and a third neutral partition accessible from either OS where I would house all of my data. The problem is, my computer already had 3 partitions set up: Windows 7, the system boot partition, and one called PQService. Because I could not find a tutorial to delete pqservice, I decided to delete my system partition, even though this seemed a little more risky (apparently it was lol.) I used this tutorial: TeraByte Unlimited Knowledge Base to copy the boot files to the windows partition and delete it. I then booted into a Live CD of Ubuntu, and used Gparted to move my Windows 7 partition in order to get rid of the 100MB of unallocated hard drive space. I then attempted to restart my computer into Windows and i got an error saying that windows could not boot because of some recent hardware changes. Is there anyway I could get back into windows without reinstalling it? Do I need to figure out some way to restore my System partition? Is there someway I could get windows to boot without doing either of those?
View 8 Replies
View Related
Mar 10, 2011
Now, I've installed Win 7 (Professional) on the same as XP is installed. When I try to boot from HDD, I only get the XP entries, but can only boot Windows 7 through.
View 2 Replies
View Related
Jun 22, 2010
I have a dual boot scenario currently on an Intel 80GB SSD, with one partition as XP Pro, and the other is Windows 7, split 20GB(XP)/50GB(7).
The XP partition needs to be upgraded to Windows 7 for my wife's work remote access, and it will also include Office 2010 Pro.
Will I run into any issues dual booting into the existing Windows 7 partition after the upgrade, or should I just reinstall our personal Windows 7 OS after the upgrade is installed?
I have other hard drives to use as well if space becomes an issue, but I'd like to keep the existing Windows 7 install without starting from scratch.
View 9 Replies
View Related
Jun 13, 2012
Here is my current hard drive partition setup: [URL]. I want to move my boot partition to the beginning of the hard drive. The partition labeled "Extra HD" can be erased, but I don't want my boot partition to be messed up at all. Is this even possible? I know Windows only lets you install one boot partition per hard drive.
View 1 Replies
View Related
Jul 28, 2011
I'm trying to install a new hard drive and retire my current one to backup and data storage purposes.
The problem is that I've installed Windows 7 on a hard drive with 2 partitions, an old XP partition (D:) and the new W7 partition (C:). At the moment the disk management screen looks like this:
What I am trying to do is delete the D: partition, and then copy/resize the C: partition including Windows 7 installation to my new hard drive (F:)
If I ignore the new hard drive and just try to migrate to a single partition, I can never get it to boot. I tried using Partition Wizard to set the C: as a primary, active partition, copied over the bootmgr and boot directory, then used bootrec /fixmbr and bootrec /fixboot to try to make Windows 7 bootable from just the C:, but it didn't work. All I got was "disk read error" whilst the PC was trying to boot off the C: (this is with all other drives disconnected...).
I could try to migrate to a single bootable partition from a 'dual boot' configuration?? I tried this video's advice and did everything as instructed but got the disk read error problem.
View 8 Replies
View Related
Mar 31, 2010
I have a laptop with twin HDDs and I have Vista on the C: partition on Drive 1. I created a new partition G: on Drive 2 and, while Vista was running, inserted the Win 7 disc and started installation to G:. All went perfectly and I have retained my original partitions with drive letters and labels, plus a new G: partition labeled Win 7. All seems to be working fine.Now I heard from a geeky friend that BOTH OS should be running on C: and that windows has some clever way of making that work. Is this true - and are there any disadvantages continuing installing MANY apps on G:?
View 3 Replies
View Related
