I want to have a boot partition, system partition and have a separate storage partition for all of my files. I am a bit confused about the boot partition/system partition relationship and still haven't found any clear or concise info to tell me how I would go about creating this. I have already partitioned the HDD into three sections and have already installed Win7. The active partition is also the boot AND system partition.
View 4 Replies
I had my friend Dell Laptop. He want me to create a two extra partitions in existing primary partition which is C:The HDD is 1TB in size.One hour ago I had used Dell data backup program and created recovery discs and then formatted the Laptop to factory default. I thought before formatting it will give me options to create a partitions but it did not had any option.
View 6 Replies View RelatedI'm using Compaq Presario CQ40-627TUMy Laptop SpecIntel Dual Core Processor T4400 (2.2GHz, 80Mhz FSB,1 MB L2 Cache)- 2048MB 800MHz DDR2 Memory- 320GB 7200rpm Hard Disk Drive- 14.1' TFT WXGA High-Definition widescreen LCD panel with brightviewtechnologynd i'm using windows 7 Ultimate on boot system partition C, dual boot with linux mint. which mean i got four partition. one for linux mint. one for its swap space. one for windows 7. one for my data storage(movies,drivers,mp3,picture and etc).last few days i try to resize my C partition (120gb) to make it smaller to gain some unallocated spaces and resize the D partition because my D (almost 100gb) (ntfs/primary/data storage) almost full. i use easeus partition master v5.01.
After done resizing and restart i can't see any D partition. so i was worried that my data will disappeared. i try to look for it but there is no Drive D even on the easeus or diskpart. the only drive appears was C Drive.i remove my Linux Mint and its swap (60gb) and thinking that i could get some more free space and do some cmd prompt windows 7 repair fixmbr thing to remove the grub. then i use partition recovery to transfer those missing data from partition D to C Drive. (appears as unformatted)i try to use partition wizard home to resize it back to 300gb. and it works. but i cant make a partition. it will disappear just like that.i also try to use diskpart,command prompt diskpard, and paragon. but also not working. the C drive was shrink but theres no unallocated space and no D drive (the new create partition). i try logical partition,primary,ntfs and fat but also not working. even the unallocated space also gone. i use almost 4 3rd party partitioning software but still got no luck with it.example:i divide 300gb into 2 partition which exist the C partition 150Gb but the other one gone. i wish theres other way than format. i also done many time. doing check disk, partition table doctor, searching for bad sector. but no errors with my hdd.
i got a new hp laptop which already as 3 partitions. C:, Recovery (D) and Local Disk (Q). Since iam very new, i want to know can i take a Backup of the Recovery(D) in DVDs and restore the space (capacity) to C drive? Or is it necessary to have it in the system? When i try to make a partition from C drive, the same old prob of getting Dynamic disk conversion comes up...Now dat i got back all the unallocated partition back to C, how do i create another new partition? I tried checking with other posts but was unable to understand..
View 3 Replies View RelatedI have my HP Laptop which came with Windows Vista as the OS. I want to upgrade to Windows 7 so I bought Windows 7 from my local store.I entered the disc and did boot from CD. It reached to the page where it shows the disk partition. I deleted the partitions and created new one. However, whenever I create the partition, it creates a primary one and gives me error saying Setup was unable to create a new system partition or locate an existing system partition.
View 9 Replies View RelatedA friend has asked me to install Widows 7 on a friends laptop which has XP. The laptop doesn't have a DVD drive (no drive at all) so I've had to stick the installer on a USB stick from disc using a program.The USB boots up fine on the laptop, just like a disc. I formatted 2 partitions (same drive) and tried to install windows 7 but I get this error:"setup was unable to create a new system partition or locate an existing partition"So now, I have someone else's laptop with no OS. The owner is a 70 year old computer illiterate man.i'm planning on trying to install Vista instead and if successful, upgrade to 7. I would have upgraded in the 1st place, but P can't be directly upgraded to 7.
View 6 Replies View RelatedWhen I try to install Windows 7 Home Premium 32bit onto my Hard Drive it says that it can't create a partition on it, so Installation cannot continue.The hard drive was formatted and cleared and ready to go..I'm in the BIOS right now, but keep in mind that this is a Dell Dimension 4600 so the BIOS isn't all that advanced like nowaday computers.
View 6 Replies View RelatedI am unable to install windows 7 as , when I start the install and click on install it shows that setup was unable to create a new partition or locate an existing system partition.I have 2 hard disks , one of size 75 gb & other of 320 Gb..Previously , OS was installed on 320 gb , but i have formatted that drive before installing windows 7...
now my 75 gb hard disk is empty & one drive of 320 gb is also empty..It shows that 320 gb hdd ia on disk 0 & 75 gb on disk 1.I want to install Os in any of the above mentioned HDD.It shows that-> 1. all drives of 320 gb HDD as Logical & 75 gb HDD drives as Primary..
I'm doing a fresh install on windows 7, instead of a disk it's on a thumb drive
I have a 500 GB Partition I want to install windows toI went through setup and formatted the disk when I try to continue with the installation and get this error.
how to create the recoverypatition at the on new installation of windows 7
View 3 Replies View RelatedI installed Windows 7 on a formerly Vista Business computer. Now I would like to know, does a clean installation of Windows 7 automatically create a recovery partition or backup? Or do I need to format the Recovery Drive D(from the Vista installation) and make a backup on that drive (D)?
View 7 Replies View RelatedI have been trying to install windows 7 on my hd and initially started with ubuntu on partition 1 then resized partition to leave unallocated space for windows 7.Now I am installing windows 7 from cd and can't get past 'where do you want to install Windows' page because of error stated in title.I've tried having unallocated space, a ntfs partition, and now have completely wiped the hd of ubuntu's partitions to clean install windows 7. None of the attempts have gotten me past the location of install page.
View 4 Replies View RelatedI have laptop with with following specs; Dell N5110core i74 Gb DDR3 ram500GB Hard isk2769mb GraphicsWhen I bought,it has only single disk drive "C" with registered Window 7 HomePremium,now I want to make partitions without format
View 4 Replies View RelatedI am getting a error during reinstallation of win 7 which is "setup was unable to create a new system partition or locate an existing system partition. See the setup log files for more information." I have win7 DVD for install. I have Dell xps studio 435MT/9100 desktop. I have 2 hard drives(640gb) each.
View 16 Replies View RelatedI'm building a new computer. Can I partition the hard disk, copy my laptop HD to boot from one partition and run a new windows 7 pro os from the second partition?
View 5 Replies View RelatedI have a copy of windows 7 from a friend. (USB, possibly enterprise)It runs well, is official and can be re installed and is verified through the Microsoft site, so the media doesn't seem to be a problem.I was able to install Win7 Ult x64 on my WinVista HomePrem x86, but I went back through to clean the hard drive (it was full, I didn't format before) and after low level formatting I cannot reinstall the OS. The harddrives are completely empty, and I get stuck at "Setup was unable to create a new system partition or locate an existing system partition," after hitting next when you are selecting the HD partition to install on. I tried a couple of things already:
-Installing on another harddrive
-Formatting using Hiren's bootcd
-Using a hard drive with XP installed to see if it is an upgrade and not a full version (no luck, still wouldn't install)
-diskpart > list disk > select disk 0 > list partition > active \ in cmd..I have three hard drives attached to the computer right now, they can't all be broken. T.T
I have windows 7 Home basic installed in my Laptop. When i bought it, it had only two partitions one for c: and one for recovery... i tried creating a partition but when i do so this appears:
And when i click yes on this alert, this appears:
I want to create partition without losing OS and recovery files in d: drive..
previously i have windows xp on my lappy. then i removed it and installed windows 7. but it wasnt restart. then with the help of windows recovery somehow i restared. but some of the drivers are not installing, and showing that system doesnot meet minimum requirments. then i tryed to find the problem. i observed that system reserved partition was not created. so i reinstalled windows.
View 3 Replies View RelatedNot able to create partition in windows 7 Home Basic 64bit,
View 2 Replies View Relatedhow to create windows image bootable partion in my hard drive
View 1 Replies View RelatedI tried to dual boot Fedora 18 with my Windows 7. They are on two different hard drives. Fedora 18 worked but I was unable to boot up Windows 7. Frustrated, I decided to just delete everything from all the hard drives and try to do a clean install of Windows 7 using the USB-DVD Windows tool to make a USB Windows 7 installer. I then got the following error when trying to install Windows onto my hard drive:
"Setup was unable to create a new system partition or locate an existing system partition. See the Setup log files for more information"
I tried unplugging the other hard drives and got the same error. I also went to the command prompt and used Diskpart and did clean all. Still the error shows up. Something that might be useful is that when I did disk list in the command prompt it showed my hard drive but with 0 free space. Not sure if this is useful but the drive I want Windows 7 on is a solid state drive but the one I had Fedora on is a normal hard drive and I had an extra harddrive that I used for storage that is a normal hard drive as well.
I had 32 bit Windows 7 home premium provided by OEM. Recently I purchased Windows 7 professional 64 bit in order to increase my memory.(My system is 64 bit capable) I followed [1]. I am using USB for installation. I booted the system with USB. Then at disk manager I deleted all the partitions(including recovery ) Then I refreshed and click next and I got an error saying setup unable to create system partition.
View 9 Replies View RelatedI want to create a new partition to load Linux on it (on my Windows 7 system). Now I currently have a C-drive(Windows), a D-Drive(80GB) and an E-Drive(400MB). Now how do I create a new partition for Linux, without using the windows cd and booting from it? Can I use Virtual Hard Disk(VHD)?
View 4 Replies View Relatedwhile i am formating my laptop i cant create more than 4 primary partiotion
what is the reason behind that error .
I've done a clean format to my OS . But at the partition creation part , some of my hdd couldn't be used to make a partition of it . I'll give you a screenshot to explain my problem better s you can see after the process tells me that creation of a new partition has been completed i end up seeing this error
View 9 Replies View RelatedI've been trying to set up a 2nd partition to put a 32bit windows 7 on, but I can't.But it's not letting me edit how much I want to shrink my drive by. Even if I manually put in a number, the "Shrink" button is gray and I cannot click on it.
View 2 Replies View Relatedim trying to create 3 accounts each on its on partition in windows7 how can i do that?
View 2 Replies View Relatedi am using lenovo y510 laptop which comes with an hidden OEM partition which can be used for "one key recovery" process to restore original settings or to format the pc without any cd or dvd or usb and it is a very nice feature a laptop can have...
now my question is...
my laptop has vista home basic in its OEM partition...is there anyway to change it to Windows 7...so that it can format Windows 7 whenever i press recovery key ?
or is there anyway to do something like this ?
when I'm formatting a HDD that is completely clean (no partitions or volumes) should I create a partition or some kind of volume to format the drive, which will format the whole drive, I don't know which one to go with.
If partition, what kind, primary extended etc. If volume, what kind of volume RAID, stripe etc
I have an odd problem - I have 2 drives - one SATA one IDE on the motherboard to choose from. Both blank. The install program sees them, apparently can partition them (let's me into advanced options), but when i select either one to install to, gives an error that it cannot create the partition.
View 6 Replies View RelatedI reach my limit and have 3 primary partition but I want to create one more. So is there any software or method to create a primary partition?
View 5 Replies View Related
