I have bought a old(ish) laptop designed for Vista but has no OS on it. I canafford a Windows 7 Professional upgrade disk.My question is can I install Windows 7 off a clean partition without ANY previous version of Windows and activate safely without conflict or invalidating the serial key.
View 4 Replies
I have a W7 upgrade disk which I purchase when W7 was release and my l copy of Windows XP SP2. Is there any way I can just install W7 on a newly formatted harddrive.
Reason:
I have a trojan virus they cannot be deleted, it can only be quaranteen. Unfortunately while quaranteened, it still creates temp files...more than a 100. After trying numerous outlets: Symantec, my product is Syamantec Endpoint Protection., Mcafee on-line, Trend Micro House Call and Web Root Secure anywhere, I am afraid I will have to reformat the drive andi install from scratch.
Downloaded the Student offer. (Pro x64 in my case) made an iso following this guide: Make bootable iso from student d/l Boot from DVD Choose Custom install when prompted. Go to Options, format the hard drive. Skip the CD-KEY Choose to NOT download updates Let the OS install Once done, Go activate Windows with your CD KEY Wait 5 mins. Tadam, Congratulations, your copy is activated.
That was tested on VMWare, after numerous other trials. Going to do that live now!
I have a Toshiba Satellite C655D laptop running Windows 7 Home Premium. Computer was working like a dream and has been for about a year now, when yesterday I booted up after running Windows update, like always, logged on like normal, only to see a blank screen with only my mouse cursor. Neither Ctrl+Alt+Del nor Ctrl+Shft+Esc work to bring up the Task Manager. I am able to boot into Safe Mode just fine, but of course unable to uninstall the Windows updates to the .NET framework.I have tried System Restore several times now, both from the Safe Mode and from the start-up recovery options accessed via F8 upon system startup. From the same menu, I have attempted Startup Repair but alas, Windows does not detect any problems (go figure, right? ).I have ran the Windows Memory Diagnostics Tool to check if my hardware was going bad, and upon completion, it rebooted, once again, to a blank screen after being prompted to log in. Mouse works, nothing else does. Upon pressing Ctrl+Alt+Del I am greeted with the following message after waiting roughly 5 minutes:"The logon process was unable to display security and logon options when CTRL+ALT+DELETE was pressed. If the operating system does not respond, press ESC or restart the computer by using the power switch."^Pressing ESC makes the message disappear along with my mouse, so that I am staring at a completely blank screen.I am on my friend's MacBook Pro right now, I'm really hoping someone can help, but I must admit I am reluctant to think so because someone once came to this board with the seemingly exact same problem and no one here was able to help him.Just to reiterate, I can boot up in Safe Mode, with or without Networking as well as accessing the Command Prompt. That's about all I can do.Edit: Now when I do a System Restore, I get this error message when it restarts (everything else is blank unless I restart in Safe Mode): However, when I try to navigate to this location either via Windows Explorer in Safe Mode or via the Command Prompt, one can clearly see that the location doesn't exist. I am confused.
View 6 Replies View RelatedAn upgrade installed and now the system hangs (could be something else, I don't know, but upgrade installed right before hang)Vaio logo comes up, then repair or start Windows regularly - If start regularly, goes to blank screenIf repair, then the sytem goes to Startup Repair and Searches for problems for hours.Repair, and login as owner, go to system restore, choose a restore point, and click next, system hangs. Don't have a system image or a good backup (My backups always hung.Will make sure I have one from now on)Had memory checked. Did not change, blank screensafe mode hangs on black screen, low res video hangsUsing Windows 7 installation disc (borrowed from a friend), the repair option hangs on "Searching for Windows Installations..." and on the other window, I can see it found my windows installation but I can't get to it, because the "Searching for Windows Installtions..." never stops.
View 1 Replies View RelatedI recently built a new PC and I want to use the Digital River student upgrade to install a legal version of Windows 7. (Currently running the RC)
I have an old XP cd/licence key that I'm no longer using which I want to use to validate the upgrade. However, I can't even install the old XP OS on the new p55 mobo.
Is there any way I can "upgrade"?
Is it possible to upgrade from vista to Windows 7 through safe mode?
View 1 Replies View RelatedYesterday I upgraded my ACER ASPIRE 7535G from vista to Windows 7. All went smoothly until I had to put the ACER cd back in after the installation to update drivers. It seemed to have crashed during this as the screen simply showed my wallpaper and nothing else, so I turned it off.
Now when i turn my laptop on, it powers up normally, with windows 7 logo etc, then the screen goes blank, the start up sound plays and the screen just stays on, but black.
I'm currently in the process of buying a new laptop and one of the ways that I can save money on it is by getting it without an OS installed onto it.. I'm able to get windows 7 off of MSDN for free because my university has some sort of partnership with them or something, but obviously this is just a download and not a disc.
Therefore I was wondering if it is possible (and how is it possible) to install an OS onto an internal blank HDD without having a disc (i haven't downloaded it yet but i'm guessing you download it as a zip or maybe .iso and they send you a key as this is how it worked for other software I've got off of them)
Upgraded Vista to 7. Have 2 directories on the C: drive ($INPACE.~TR and $WINDOWS.~Q) that weren't there before upgrade. Are these old Vista data and do I need them?
View 2 Replies View RelatedI'm trying to install Windows 7 on my PC again, and came to a blank screen after the reboot. I have the PC hooked up to a TV using the S-Video output on my graphics card, and suspect that win 7 is using the DVI port instead. There is no way at the moment that I can use the DVI port because I don't have a monitor that supports it.
is there a way around this so I can use the S-video output for the rest of the installation?
I'm trying to install Windows 7 on a new SSD, my old hard drive crashed. My video card is an onboard ATI Radeon HD 4250. Initial setup works fine, but when the computer reboots it comes back up blank. I'm already running two monitors, one VGA and one DVI, and safe mode doesn't work either, I've tried booting from a flash drive and a dvd with exactly the same results.
View 9 Replies View RelatedI got my hands on a product key for Windows 7 64bit enterprise for my spanking new PC build. How can I go about using it? Do I just burn any Windows 7 64 bit ISO to a blank dvd and install it on my new hardrive? Does it have to be a specific copy?
View 2 Replies View RelatedI've heard many people saying you can install Windows 7 upgrade version straight onto an blank computer (just to be clear on what i'm saying, i mean a brand new computer that has never had an OS installed on it in its lifetime).
View 8 Replies View RelatedSo I formatted my SSD. So there is no Windows on it and I am not able to access windows 7 on it. so I put in my CD went along with the install until it asked me where I want to install it to. Of course I chose my SSD. However it gave m his terror message The selected disk has an MBR partition table. on EFI systems, Windoed cak only be installed on GPT disks."
View 5 Replies View RelatedI'm trying to install Windows 7 Ultimate 64bit onto my blank harddrive via usb that was setup with the microsoft application for doing so.
It adds new windows files to about 80% then give me this error: Code: Windows cannot install required files. The file does not exist. Make sure all the files required for installation are available, and restart the installation. Error code: 0x80070002 Phenom x4 9850
6GB ram
nvidia 9800gt
seagate 7200rpm 750gig baracuda
460W PSU
m2n78-la viola
So I got a new blank laptop in the mail today with no OS and I was curious if I could use the Windows 7 "upgrade" to install windows 7 on my blank laptop?
To fully describe my current situation, here is what I have: A blank laptop no OS. A windows 7 premium CD, with key OEM version. (Already used on my desktop which the mobo recently fried for so I will be without for another 2 weeks or so)
Is there an easy way for me to get Windows 7 on the blank laptop? I'm looking at saving money since the upgrade deal is only $50. Or am I going to have to get buy a new Windows 7 disk?
If that is my only option I'm thinking of using the OEM disk and calling up microsoft explaining I am reinstalling due to virus (but really installing on the blank laptop). Then buy another Windows 7 from neweg, so I won't have to wait to get my laptop set up. (this would be my last resort.
I have an odd problem with my Windows 7 installation. The computer I'm trying to install it on is running Windows XP, and any time I try to boot from the disk (I have it set to be first in the boot sequence), it seems to just skip over the disk altogether and run boot from the hard drive (into Windows XP). I looked into this further, and it turns out that the computer sees the disk as being blank (0 bytes out of 0 total bytes).
When I put it into other computers, it is read fine, and I have even used this disk to install multiple copies of Windows 7 on other computers. The computer that isn't working can read any other disk fine, and has never had DVD-drive related problems. I've even tried copying the files from the Windows 7 disk onto another DVD, as well as a portable USB drive, but those didn't seem to work either (it gave me some error about the disk not being bootable).
I just installed a fresh copy of windows 7, the setup process even took me far enough to create the account, time, homegroup settings ect. It seemed successful. Then it restarts one final time and results in a blank screen after the bios screen flashes. I've tried every setting in the BIOS with no avail. Pressing CTRL ALT DEL at the blank screen just restarts the computer, flashes the bios as usual, and then when you should see the windows loading sign it loads a blank screen with no mouse cursor at all.
I've already tried formatting twice and it results in the same exact issue. The computer was working fine before hand, didn't add any hardware or anything.
When I try to do a clean install of Windows 7 I get the loading files white progress bar you normally get during an installation, it then goes directly to the scrolling progress bar that would normally appear before a Windows startup, and then goes to a blank Windows 7 desktop with only a cursor (that I can move).I have a computer with the following specs:[CODE]I have tried to install with every version I can get my hands on, both 32 and 64 bit. None of them are upgrade versions. I've tried installing on a fresh WD Raptor and an Intel G25 SSD. All other drives have been disconnected. I've moved my memory around and tried with one stick. My mainboard has the latest official BIOS, although there is a new beta.
I ran the Windows 7 compatibility test and didn't see anything that would cause this problem.I have searched the internet and have not been able to find a solution sonstalling Windows XP has never been a problem, just Windows 7, always with the same problem.This is one of the few times when I have not been able to look around a find an existing answer to a problem and I am stumped.
my pc opens in safe mode by itself,i tryed to restore the pc with delldata safe or something like that then the pc restored and format,,now i opens i push start windows normally and opens in safe mode then it writes"Prepearing ur computer for it first use"then it writes cant install or something like this windows 7 cause pc is in safe mode restart the pc"and i restart and again is same thing again and again
View 9 Replies View Relatedmy windows 7 wont install its says starting computer for first use then stops and says it can not complete install due its in safe mode . ive tryed restore it back to factory setting but that dose not work
View 1 Replies View RelatedI'm having problem when i make install windows 7.when the setup is over and the pc restart for the first time windows7, then my screen turn to black and only the logo is appearing down in the corner of the screen..and i was thinking , maybe it want a lot of time to start so i let it for many many hours but it continues to look like that with the black screen and the logo..
So i try to install in another pc and everything gone just perfect!!
WHAT IS THE PROBLEM FOR MY PC? WHAT CA I DO? don't know:
I tried a lot of times to install it, for almost a month every day! what is wrong with my pc? is it real? only mine?
My old HDD was fried so I decided to use my External HDD to boot off. Afterreformatting the drive I have installed it into my laptop and have attempted to install Windows 7 64bit and its all going great until after the starting windows screen and then it just turns black with the cursor. What I have tried so far....- I have reset the BIOS to defalt-Cleared the CMOS- Checked the RAM (even left 1 2gig stick in and tried that?)
View 1 Replies View RelatedPer microsoft I need to do try a repair install from original disk. Is there a difference between running repair install from Windows or booting from original disk then selecting upgrade install? Is one or the other preferred? Directions say both attempt to preserve installed programs, but not all drivers, and both require reinstalling all the 60 or so windows updates released after my disk. so no differences there.
View 9 Replies View RelatedDoes anyone know whether there is a difference in performance between doing a clean install of Windows 7 vs upgrading Vista? Any better stability? I'm just wondering whether it's worth the trouble of the clean install.
View 3 Replies View Relatedthe only way I can accurately portray my predicament is via numbered flow chart:
1. Wake up sleeping computer, nothing happens, starts humming faster and faster, so I pull the plug.
2. Turn on computer, goes through the ASUS screen, then the mother board screen has some weird pixelation on the left scree, like some lines or something. Windows is loading....then black screen forever. do this 1 or 2 more times.
3. Go to System Repair and System Restore. Repair fails and tells me a Boot Driver is failing. Restore fails each time.
4. Hold F1, go to boot menu, hit F8, select Safe Mode. Safe Mode works, fantastic.
5. Do AVG Defrag, Disk Clean, and Disk Repair. Then restart...now I get a blue "Dumping Physical Memory" screen.
6. Go back to Safe Mode, use boot disk, tell it to un/re-install windows.
7. Come back later and find it in Phys Mem dump loop, pop it into Safe Mode again. I then see two Windows 7 OSs to choose from, pick the bottom one. Says it can't complete installation in Safe Mode, restart it normal, Phys Dump loop.
8. I do the same thing for the top Win 7 choice, same thing.
9. I've back up all my files, and have drivers/boots disks for everything I own. How do I wipe my hard drive and start fresh?
I have a machine that's been flakey for about 2 months. It was fine, running Win7 64bit Home Premium just fine for 2 years. I upgraded the video card about 6 months ago and had no problems.Then, about 2 months ago, it would randomly stop responding. Mouse movements still worked, but buttons clicked wouldn't do anything. I could be running a Microsoft Security Essentials scan and it would just not progress. No malware scanners run from DVD found anything. I did the Kaspersky Rescue disc, and the Windows Defender Offline disc. Nothing was found.I assumed my HDD was dying, so I bought a new one (wanted to upgrade anyways). I took out the old HDD and put the new one in. I did a clean install of Win7 from a DVD I burned. The Win7 install goes perfectly. However, after the first login, I get the same problems after about 8-15 minutes. The machine just stops doing anything. The mouse still moves, status bars cycle but nothing completes. I can't open IE, can't kill anything from Task Manager, can't do anything with the mouse or keyboard that actually DOES anything, if that makes sense.
The weird thing is that the machine is perfectly stable in Safe Mode with Networking (other Safe Modes are also stable). It can run for a week straight in Safe Mode, connect to the internet, write word docs, etc. No errors, no warnings, no odd behavior. When I try to then reboot and login to Windows normally, same problems as above.Do I have a strange hardware issue (video card, memory failing, power supply...???) or some BIOS virus that's survived the new HDD and clean install?I'm at my wit's end, and my wife wants me to call Dell, which I don't want to do I'd rather fix this myself. I'm not afraid of formatting or wiping partitions because there's nothing on the HDD.
I have seen a lot on clean installs but all guides are from like 2009. Is clean install still a way to install windows 7 with upgrade disc on a new hdd? since i have a hdd with vista on it and i have the licence how do i install 7 with the licence and a black hdd?
View 9 Replies View Relatedafter searching on microsoft's website, google and finally Tomshardware... I couldnt find anything close to what im experiencing.My computer was working fine, no issues or problems. I decided to do a fresh install because it had been about 1.5 years. Thats where all the trouble started....I have a legal Copy of windows and a Legal CD I bought from a store so piracy isnt an issue.1) I tried to install windows 7 home prem 64 bit and i kept getting a Missing Boot Mgr message. I figured out that when windows was installing it wasnt creating the 100mb partition for system files and what not.2) After fix that, my computer would not boot to desktop unless i had the Windows 7 CD in... I unplugged all other HDD's (2 Storage), Reformated and it worked.
3) Now once windows finished installing, I opened a few basic programs without installing any drivers or updates. Everything worked, left it up and idled for an hour no problems, ran tests on Mem and HDD no problems either. 4) I did my windows updates and it installed after which it prompted me to restart... I did and thats when the problem happens. I takes a very long time to boot into my desktop and once there, I have a 1920x1080 resolution (from 800x600) and i have no Icons, taskbar or anything but my wallpaper... if i press Alt + Ctrl + Del i get a black screen and if i press ESC i get my wallpaper background back...5) I deleted the partition & reformated, and same issue after updates. The comptuer works perfectly fine in safemode and boots to my desktop... It is very weird. I ran Windows repair and I even open CMD Prompt and typed in the commands to fix the boot, fix the MBR and scan the OS, Everything was fix or operational.
After few seconds start screen disappears and is repalced by a Black/Blank screen with only mouse pointer. Mouser is working but there is nothing on screen to click on. Keyboard is working fine too. (checked with NumLock and Caps Lock keys)
Nothing happends beyond this point even after rebooting and repeating above process.
Searched internet for above problem symptoms. Looks like Windows 7 decides default monitor on its own. There is no way to decide it yourself duing installation.
My motherboard has two ports. 1 DVI and 1 analog. I have only 1 Analog monitor and do not plan on buying/having another monitor.
DVI to analog convertor is not available in market to test display from DVI port.
Could somebody please help?
