Windows 7 Installation, Starts Then Nothing But Mouse & Screen?
Nov 22, 2011
I currently have Windows XP SP3 installed on drive CDrive D is empty - Used to have Windows XPDrive E is my data drive.I put the Windows 7 64 Bit DVD in, it boots up and states loading files, then I see the coloured dots make the Microsoft window, then a blue screen with coloured lines and what looks like leaves. The mouse works, but that's where it all stops. I don't see anything else. Do I need to do anything special at this stage to proceed?What I want to do.I want to install Windows Ultimate onto Drive D but keep my Windows XP install as Dual Boot for now. I imagine, the CD would give me options to install like XP used to on drive of my choice, format my D drive and install.
My PCPentium Dual Core E5300 @ 2.60GHZNVIDEA GeForce 8600 GT 512Mb graphics cardGigabyte G31M-ES2L motherboardI could not tell you which ones but 1 of my hard drives is SATA and the other two are the old connection. They are all 80Gig. I think the set up is like this.Hard Drive 1 SATA - Master, DVD SATA - Slaveard Drive 2 Old Connection, Hard Drive 3 - Slave
View 2 Replies
ADVERTISEMENT
Jan 12, 2012
I have tried at least 5 times installing the OS by using Recovery DVD's that I order from HP. I am able to boot from the DVD's and go through the process of Inserting Disc 1, Disc 2, and Disc 3. Once the setup is complete, I am prompted to Click Continue so that the system can restart the computer and continue the windows 7 Installation. It never even starts the installation. It gives me the following screen:
Windows Boot Manager. Windows failed to start. A recent hardware or software change might be the cause. To fix the problem: Insert Your Windows installation disc and restart your computer. Choose your language settings, and then click "Next." Click "Repair your computer." If you do not have this disc, contact your system administrator or computer manufacturer for assistance.
Status: 0xc000000f
Info: The boot selection failed because a required device is inaccessible.
ENTER = Continue
ESC = Exit
If I press Enter I am greeted by another Windows Boot Manager screen.... that says "Choose an operating system to start, or press TAB to select a tool".
Troubleshooting I have done:
- I have tried to install the OS in different ways. i.e. with a formatted HDD, re-installing over error msg, swapped hard drives.
- I also inserted the "Windows 7 Repair disk" (I made the disk from my other windows 7 machine that is also 64-bit)
From there I boot it up, and it detects start up problems and tells me to click restart to fix issues. I restart and cross my fingers to only end up disappointed by the screen above. I have also checked and I do have boot from notebook HDD as my primary boot up device.
View 10 Replies
View Related
Feb 29, 2012
I'm trying to install windows 7 on to my new build but when I get to the language selection the mouse and keyboard stop working and no cursor appears, they both work in bios so I don't know what the issue is.
View 6 Replies
View Related
Mar 15, 2010
installed windows 7 ultimate(tried both 64 and 32 bit) to my pc. but after installation when it reboots for the 1st time, it shows a black screen with the mouse pointer. i waited 1/2 hour but no use.my pc config core2quad q6600, asus P5KVM, 2 gb ddr2 ram, nvidia 9600gt 512mb and 380 gb seagate hd also when i try to boot in safe mode it says that windows have to start normally for the first time.i installed it over xp sp3 by formatting the c drive.i have reinstalled it atleast 6 times but no change.
View 7 Replies
View Related
Sep 26, 2009
I am doing a clean install on a amd 64 bit 4500 with a ati 1gig graphics card, 250g harddrive and i think at least that is what i have. The problem that i am having is that after installing windows 7 it freezes on the initial start up window where it is asking the language to install time and currency format and keyboard.
It took a long time to get to this screen as at first it just hung on what looked like a windows 7 desktop background with no icons. It hung like this for about 10 minutes and now it is stuck on the first install screen. I cant input any information the keyboard is plugged in and I have tried it with a wireless mouse as well as a wired mouse.
View 1 Replies
View Related
Jan 15, 2013
A couple days ago my mouse started to turn off.I thought it was the USB and mouse drivers so I updated them but it was no good.So I deleted the drivers and reinstalled them but that was no good.I checked in the device mannager and there was nothing about the mouse.BTW I'm using a leptop.
View 2 Replies
View Related
Oct 20, 2011
Were working fine yesterday. Today I return home and find computer had mysteriously turned itself on. Mouse not working but keyboard allows me to try to shut down. Taking very long time so shut down with power button.
Now my keyboard and mouse both do not work on Windows login screen. Same for safe mode. Before this, in BIOS, other screens can get to by holding down keys as computer starts, keyboard works.
As Windows loads, can see keyboard illumination switches off. Same for mouse laser. My other USB peripherals (extra HD and wireless thingy) still have lights on. Fairly new computer. Cost me �300 new about 6 months ago.
I tried to 'roll back' Windows - there was only one option - for when I installed Itunes maybe a week ago, but that failed. I chacked inside and outside the case to see if there's any sockets for PS/2 keyboards, but there aren't any.
View 6 Replies
View Related
Aug 27, 2010
I formated all my particions of hdd, now i cant install Windows 7 or xp (by booting cd/dvd), because when system reboots it starts all over again. What should i do?
View 6 Replies
View Related
Jan 10, 2012
I noticed that when I shutdown my computer through windows I can turn my computer on just by holding the right mouse button than the usually start button on the tower. Is this under Windows 7 64 bit home features? Because I can't find anything on google about this feature.
View 5 Replies
View Related
Sep 10, 2011
have a problem with my Toshiba Satellite Pro U400, I recently did a clean install of windows 7 home premium 32bit and when I turn it on the mouse freeze but everything els works but it doesn't unfreeze unless when I turn it off and on then it will work but the problem happens again after I turn if on and off again
View 1 Replies
View Related
May 24, 2010
I started with Windows 7 and when the computer reboots to install Windows XP it starts the installation process then the computer shuts off? What do I do?
View 4 Replies
View Related
Feb 25, 2012
Very strange problem happened after I reinstalled Windows 7. My computer boots and runs fine, no issues. Whenever I turn it on from cold or restart, the screen is off up until Windows starts loading. If I keep pressing DEL during boot, the BIOS comes up on the screen. Exit the BIOS and same, nothing on the screen until windows is loading. I have one PCI-E graphics card going to one monitor, and I tried changing in the BIOS PEG and PCI for the graphics card but with no luck
View 8 Replies
View Related
Jul 9, 2011
The Compaq laptop with windows 7 starts up with a black screen, as soon as I start it up it will start the cooling fan but the screen does nothing but just a black screen. Before this happend, I was playing minecraft and then left it and when I came back the computer had automaticly locked, I tried to put my password in then it would not let me type, no keys would come up. I then put down the laptop lid then when I lifted it up again and it just was a black screen, I tried to startup again but still black screen.
View 3 Replies
View Related
Jan 21, 2011
Windows boots and starts up, but at some point I get a black screen from which I cannot exit unless I reboot. Since my video card has 512MB, and my board's maximum memory is 4GB, I suspected Windows would not have the full 4GB to play with, and, sure enough, the Windows properties screen shows I have 3584 MB available. Also, the POST screen seems to test 3670016 KB, which I believe is the same thing. In fact, even the memory test programs report only 3584 MB memory. I have been running Win 7 x64 for several months on my Gigabyte GA-K8NSC-939 motherboard using 2GB memory (4x512MB). I decided to upgrade to 4GB (4x1GB), the max the board can handle.
Installed and tested using Memtest-86, Memtest86+, and Memscope with several passes of each -- all good. On the other hand, one of the advanced tests for Win Mem Diagnostic failed, but since it was making lots of artifacts on the screen, I suspected it was confusing video memory with RAM. So I thought Windows knows about my memory and vid card and is reserving things apprpriately, but maybe not. I boot and go into Win 7, and enter my password, but some time later the screen goes dark as if it has gone to sleep, except it will not wake up.
Most of the time just before it goes dark, I see several colors on the screen, which make me think it has something to do with the video, and I wonder if the computer is getting confused about which memory it can use for what purpose. I looked in the BIOS for something obvious, but I didn't find anything, except (maybe?) the setting for "Init Display First" which was set to "PCI slot," and which I changed to "AGP," but I don't think that worked. I looked for but did not find something about memory mapping, so maybe that is on already.
View 18 Replies
View Related
Sep 5, 2011
I recently built a computer and today began to install Windows 7. The mouse and keyboard I bought work during BIOS configuration, but not during the OS installation. At all. I have tried other mice and keyboards and nothing works, not wireless or wired mice.
View 3 Replies
View Related
Sep 23, 2012
My problem is why is my Cpu starting but my screen wont start or its black? but somtimes its working and when i restart my pc it wont start again
View 1 Replies
View Related
Jan 18, 2013
I have a brand new computer. It is an HP Compaq Pro 6300. I run Windows 7 Pro.My screen saver and my power settings never kick in. I have searched the internet for answers. Nothing I tried has helped. I had a session with HP tech support, they couldn't figure it out.
View 2 Replies
View Related
Jan 17, 2012
When I start my laptop,after welcome screen before opening the desktop screen there comes blank screen in black colour for about 30 seconds.
However I have
Dell n5110 core i7
4 gb ram
500 gb gard disk
1 gb nvidia graphic card
View 5 Replies
View Related
Aug 22, 2010
I've just gotten done backing up all the data I want backed up, uninstalled iTunes and all of it's components, ran Windows 7 advisor and am ready to proceed with the custom install but I just wanted to make sure that I would be ok using my existing wireless mouse and keyboard during the install. I have a Logitech S510 keyboard and a Logitech LX8 mouse....would I be alright to begin the installation process with these or should I connect hardwired versions instead
View 5 Replies
View Related
Nov 22, 2012
Apart from moving my profile to another disk, what can i do to prevent my mouse getting slow while some bigger setup or file extraction is running? Change location of TEMP files folder to another drive - Microsoft Community
View 1 Replies
View Related
Feb 8, 2011
my computer start giving me blue screen error. It's a recurrent problem, but it happens only when I'm playing games, altough it seens to happen with all games, it happens more often when I'm playing World of Warcraft and Pro Evolution Soccer 2011, since they're the ones I play most. When the system crashes, the blue screen shows no file names but the log when the PC resets shows that BCCode: 7f / BCP1: 0000000D, don't know what it means. My OS is Windows 7 Ultimate 32-bit. I ran out of ideas for solutions, tried an OS reset (I was on XP and formated it to install 7), reinstalled all my drivers and tried all kinds of forums, looking for a solution, but nothing happened.
View 2 Replies
View Related
Jun 26, 2012
I just got a new computer, custom built nothing on either hard drives, i have a 1tb hard drive and a 64 gb SSD drive. I have a brand new windows 7 oem version, I start my computer up and it gets stuck on a screen.
View 8 Replies
View Related
May 23, 2011
I was messing around with the settings trying to get a more clear pricutre, and now the desktop doesn't show any icons, no menu bar, and the background is partially cut out all around (like it's stretched to the original picture size). When I use ctrl alt delete the tv just goes black.The main problem is I can't use the main screen to adjust anything because my friend cracked it bad enough to where I can't make anything out.I have no problems using my friend's 40" tv, so I tried adjusting the resolution to a smaller size, but when I plug it back into the smaller tv it still doesn't work.I think this started happening when I changed some stuff in Asus Utilities Extended Desktop, but disabling that doesn't work.
View 4 Replies
View Related
Feb 12, 2011
The computer i am running has been through a lot of stuff, and this morning it finally gave out on me, It blue screened and now will only start in safe mode, when i run it normally it allowed me to type my password then it freezes while saying welcome. and does not go past there sometimes it will restart or blue screen from there. runs fine though.
View 3 Replies
View Related
Nov 29, 2009
I have a dual screen setup (PC & TV) & just upgraded from mce2005. Whenever mce2005 started up, media center automatically displayed on my tv screen rather than my pc monitor. With Windows 7 it seems to display on my PC monitor at startup, even though I have dragged it onto the tv screen the previous time I used it. Is there a way I can get it to start up on my tv screen but keep my PC monitor as my primary screen? My video card is an nVidia GeForce 7300LE
PS It's also time for a video card upgrade as live TV is very choppy - would people recommend ATI or nVidia?
View 3 Replies
View Related
Jan 9, 2012
i also found the same problem in my dell laptop studio. i installed, my laptop came with window vista , then i installed win 7 ultimate OS, after that i reinstalled win 7 pro OS. and now i am facing the same problem. i.e blank screen on start up sometimes. can any one please tell me that how should i reinstall the my first operating i.e window vista and when i bought laptop i got it without the cd of windows
View 2 Replies
View Related
Oct 7, 2012
but I was given it used from the previous owner and later found out it was refurbished. It is a Gateway NV53A. I have always had issues with BSOD's and Windows errors, and most of them either driver or memory related. I fixed and updated all drivers, but never did anything about memory except maybe some tests and they all came out fine. 3 days ago, I was using my PC just browsing a Web page and suddenly the screen went black. I thought it was the lcd, but I closed the lid to see if it would go into standby mode and it just stood there powered on and frozen... The only way it would react was if I manually turned it off holding power button.
Sometimes it does boot up, sometimes it gets farther than others. What I mean is, sometimes it gets past the Gateway logo and crashes there, sometimes it boots up to to the home screen, and sometimes it doesn't even boot... How far it gets depends on how long the PC has been turned off. Odd I know... Anyways, I found out my motherboard requires ram with 1066mhz fsb whereas the current ram sticks it has installed are 800mhz.... I was told new ram with 1066mhz would fix my issues and allow my PC tu boot and run fine as it always did, but I just wanted to be sure that's my Issue, and I also wanted to know how come the computer ran fine (with the exception of BSOD's and some errors occurring every now and then) before and now suddenly I'm screwed. I'm currently using two 2GB DDR3 Ram memory sticks. The brand and model of each stick is Nanya nt2gc64b88b0ns-cg
View 2 Replies
View Related
Jun 16, 2012
its 1 year 7 months old it starts goes to windows error recovery after choosing start windows normally it then goes to black screen and moveable cursor
View 2 Replies
View Related
Dec 4, 2009
I have a dell vostro 420, and I want to install windows 7 32bit home edition.
I was running xp fine untill a while ago. I was having hard drive problems.
I ended up getting a replacement hard drive, which is now in my PC.
I tried to do a clean install of 7, but the mouse and keyboard froze during install.
I'm able to install xp, which works fine, but would rather be running windows 7!
how can I fix this!?
I did manage to get it up and running eventually on the old hard drive-after turning off and on many many times during install due to mouse/keyboard freezes! and general 'hanging' at points during install
windows 7 then locked up my mouse keyboard after a few seconds or minutes (or froze?)
windows 7 safe mode worked fine.
View 9 Replies
View Related
Dec 8, 2009
So, I'm trying to install Windows 7. The keyboard and mouse seem to work fine until I get to the Windows 7 installation screen. When I'm there the keyboard and mouse are unresponsive. Like, the mouse light and keyboard lights work up until the Windows 7 screen shows up. Anyone know what the problem is? I've had Windows 7 on it previously and had no issues, but wanted to do new clean install.
View 5 Replies
View Related
Apr 11, 2012
yesterday when i was making log out from my computer, there is no log out screen!! just black screen and mouse cursor, and when i did restart again , no logon screen appears or no any thing in screen , just black screen and mouse cursor too.I was tried every thing and no difference :safe modestartup repairrestore to some point (i dont have a point)upgrade windows or reinstall iti think the things maybe was made this poblem are :i was edited userinit.exe value from registry by deleting the comma from the end of its value. i used Windows 7 manager to make some clean and fixes some things on computer.
View 3 Replies
View Related
