I recently installed Windows 7 from a USB drive (16GB) instead of the disc. One of the issues I've encountered after was that in my Win7 boot up, I'm taken to the boot selection menu, which is usually reserved for multi-booting, or crash recovery.The options shown are...- Windows 7 Ultimate- Windows EMS Setupand towards the bottom of the screen some type of diagnostic option. I can't remember off the top of my head.Is there any way I can remove the setup option from this menu? I would like to boot straight into Windows without timing out, or having to select it manually.
I am running an Advent desktop PC and its stats are as follows; Intel Core i5-2310 CPU @ 2.90GHz 8GB RAM Win 7 64 bit.The problem I am having is when ever i boot up the computer it shows the Advent logo-screen where I can access the boot menu etc but then it goes to a black screen with a cursor/underscore flashing in the top left... This screen stays for quite a while and I am not sure if it stops because of a key I have pressed or just because it has run its course but after it disappears the computer goes back to the logo-screen for a moment and proceeds to boot up as normal except slightly slower than usual.It is a relatively new computer and it has no problems running at all once the boot up is complete it is fast and as friendly as ever.
Last night I installed Windows 7 (x64) on a separate partition.
Anytime I had tried this in the past, using Vista, it always detected the Windows XP partition, and gave me a boot menu with "Earlier Version of Windows" option to boot to.
This is not so with Windows 7.
How can I get the boot menu to show both options, to boot to XP or to Windows 7?
i have a toshiba laptop , which has vista and i then managed to dual boot it with windows7 it was working fine , but i then had to restore my vista to factory settings -
i think the bootloader is overwritten im not fully sure - the windows 7 partion is still there when i go on my computer
I have Windows 7 and XP installed on separate partitions of one drive. I also had a 2nd hard drive, for backing up data, which I think has died so I disconnected it. This machine used to automatically boot into Windows 7, but now it goes to XP. There was nothing installed onto the 2nd drive so I have no idea why disconnecting that would change anything. I've checked, and the Windows 7 files are still available on the working hard drive.Previously, if I wanted to boot into XP instead of 7, I would go into the BIOS and change the boot order of the 2 hard drives, and then it would automatically boot into the other OS.One other thing I remember, is that when I had the Windows 7 loaded up, it showed the Windows 7 partition as being the C drive. When I have XP turned on, it shows the Windows 7 partition as being D drive and XP as being in the C drive.
I had installed Mint Linus as a dual boot through ML to try. After carefully removing it per instructions, when I boot I get the Windows Boot Manager, which I never had and don't need as I only have Win 7. How do I get rid of it (extra boot time).
I have Windows XP and Ubuntu Wubi on my PC, and Windows 7 on top of that. Windows Xp is installed on C: and 7 is on another drive. I have formatted the drive on which 7 was installed. But I still get the 7 boot menu at boot. Then after selecting "Earlier version of windows", I get the XP boot menu. I want to remove the 7 boot menu. I think the 7 MBR is installed on C:, so it is not removed.
I'm running Win7 64-bit on a home-built machine. I'm trying to reformat C drive.OK. So, my bios is set to boot only from CD. My keyboard is enabled in the bios. Yet when I use F12 to enter boot menu, hdd is shown as selected. When I scoll down, select CD and hit enter, my machine still boots from hdd. I have used imgburn to burn a new copy of the Win7 DVD in case mine was faulty..
I got this new computer and at some point I went into the boot option to try and install my PC to it's factory settings but when I opened up the boot option it showed something like this but not exactly:
1. MC43689SGDAL7 2. MATSHITADVD-RAM
This is very random and unusual and I have found no fix and as you should know it should look something like this:
1. CD/DVD Drive 2. USB 3. Hard Drive 4. something else
Even in my Bios menu it shows the same thing and I cannot change it so I can't boot from a USB or CD, etc.
i did a terrible mistake. i installed windows 7 first on one drive and then i install windows xp on separate drive. and when i restart there was no boot menu to choose the OS from list only windows xp started straight away. i did not knew about EasyBCD . and i put my windows 7 DVD and run recovery. now i can goto windows 7 but xp is missing again. is there any way i will not install xp from beginning and windows 7 can add boot menu in startup to choose xp or 7.
Everytime I restart the computer it boots into a repair mode,attempts to repair my computer, and then tells me "startup repair cannot repair this computer automatically". Why it's doing this I don't know,the system was working fine an hour ago.The only change I made was to attempt to make my RAID work, I rebooted, entered BIOS and changed my "Sata Operation Mode" to "RAID",then the problems started happening. I tried turning it back, even resetting BIOS defaults, but no go. During the boot up though I turned my comp off during the middle of windows loading, I wonder if that could have caused the problem?I know it's not recommended but it's something I've always done and never had a problem with.I've been trying to access my Advanced boot menu to start windows normally(perhaps it's stuck in some kind of repair cycle?) but pressing f8 does nothing, I've tried a thousand times.
I put in my Windows 7 disk and attempted a repair through there which halfway worked. When I boot up now it gives me two OS options to choose from, Windows and Windows 7 Home Premium (Recovered).The latter one boots up windows fine but all of my files are gone and it's telling me my copy of windows is not genuine! I had the majority of my data so it's not a huge deal to do a clean install but I would like to avoid that if possible.I'm using an asrock 890fx mobo with AMD processor.
So im having issues with my PNY 8gb Flash drive that im trying to use to install 7 onto my desktop. The problem is that whenever I insert it into my computer and try and boot off it, (Clean install btw) even though the bios menus detect the drive when I boot it acts as though it didnt insert. I need my desktop.
I have defined BootMenuPolicy for Windows 7 loader as standard(1) in a multi boot system with Windows 8 and Windows 7 (and other OSs) and set Windows 7 as default loader. System boots directly to Windows 7 - no boot menu is displayed.So what is prohibiting boot manager to display boot menu ?(If bootmenupolicy for Win 7 is set to legacy(0) boot menu is displayed.)
bcdedit output:
Windows Boot Manager -------------------- identifier {bootmgr} device partition=D: description Windows Boot Manager locale en-US inherit {globalsettings}
1. "System reserve" which contains e.g.the Bootmamanger and MBR 2. First Win 7 installation ("main") 3. Second Win 7 installation ("reserve")
When I boot now at first the Bootmanager on the first primary partition is called/started which in turn starts the boot menu. In the boot menu there are currently two entries:
Windows 7 Windows 7
So I cannot distinguish between the "main" and the "reserve" Win 7 installation. How exactly can I modify/rename the two "Windows 7" entries in boot menu? After selecting and booting the actual Windows 7 installation the other Windows 7 installation is visible as a separate partition in WinExplorer:
C: Running Windows 7 D: DVD drive E: Other (non-booted) Windows 7
How can I automatically hide the other Windows 7 installation? The drive E: should be available e.g. for USB sticks or network drives.
I am doing an upgrade from XP to Windows 7. I have done this numerous times with no problems until today. I put in the disc for the upgrade and loaded the Boot Device Menu (F12). Then I selected Onboard or USB CD-ROM Drive and I can hear the CD spinning but it does nothing. It wont load and the 'Onboard or USB CD-ROM Drive' option stays highlighted. I just installed XP doing this exact same method because I installed a new harddrive and I had no problems. It only occurred once I put in the W7 disc.
Is it normal for Windows 7 Home Premium to have multiple boot options at the F8 safe mode menu? (I.e. "Enable boot Logging" "Dosable unsigned drivers" etc etc). I thought there were only three boot options: Safe Mode, Safe Mode with Networking, and Safe Mode with command line..... It seems my safe mode prompt has those three plus all the others.
I'm running Windows 7 Home Premium, 64 bit, on a Gateway, motherboard is EG43M. It is a dual-core Pentium, CPU E5300 @ 2.60GHz.
I have a virus that calls for running Windows Defender Offline. I'm trying to boot my PC from a USB drive to run WDO, but it doesn't work. I've tried pressing F12 on startup to enter the Boot Menu to change it. How do I gain entry to the Boot Menu to change to boot from USB drive?
My pc switches on but doesn't boot. I normally just get a black screen with a flashing underscore in top left corner. I can get into the start up menu and then the boot menu and boot the pc that way. I have on the odd occasion received an error message, something about the keyboard, i cant remember exactly its been a while since i seen that message.
I have an eMachines E528 with an Intel Celeron 900 processor. I got the blue screen of death and was able to use the Windows system repair disk to reinstall windows 7. However, while trying to "update" Windows 7 with the SP1 update through the windows update tool, I got the blue screen of death again. This time I cannot boot the computer. I've tried a recovery disk, a system repair disk, a new clean copy of windows 7, and a Partition Wizard bootable CD. Everytime it gets to the point of loading ANY menu, it freezes up and does nothing for hours. I have spent so much time researching and trying things from other forums, and I have gotten nowhere. get a fresh copy of windows on this computer? or get me into the menu that allows me to restore from a system repair disk? I have even tried an "eRecovery" without even going into Windows by pressing ALT F10 at the logo screen as the computer is booting up, and I still get hung up while the application is trying to load the menu options.
is there a way to arrange my boot menu w/o me having to unplug drivers manually? It is set up to where my back-up 1 tb is the primary boot device, my dvd wr is secondary and my hdd is the 3rd device, so when I start my pc I have to load boot menu and manually select my hdd every time.
Ive just installed Windows 7 beta onto an empty partition in my PC thats running Vista Home Premium x64. If I boot the PC i get no boot menu, it goes straight into Vista. If I put the Windows 7 installation dvd in my drive it goes straight into Windows 7. Both operating systems are working fine but how do I create a boot menu instead of using the installation dvd to start Windows 7?
I was having some trouble trying to disable windows patchguard. I currently running windows 7 but i have windows 8 also. So when i use the program that most people would use to disable the patch manager is not working for me. If there is a second way to doing this or how to have the patchguard show up on the boot menu.
My Husbands Toshiba Satellite P300 running windows 7 professional, will not boot past the black Toshiba screen F2 and F12 do not work it is frozen on the black Toshiba screen so I cannot change the boot menu to reformat.Is there another way to load the windows 7 or my repair disk? My granddaughter tripped over the cord and the computer had a small fall onto carpet but fired up and worked perfectly well, The third time I restarted it froze.
I have been dual booting for about 6 months now with no problems.I installed XP first and then Windows7.When I boot the computer it goes to Windows7.It gives me the option on the screen to choose other operating system which I do.All of a sudden I can't get into XP,it just stays a black screen.So I booted back to 7 and checked the boot menu and only Windows7 is listed,don't know why,it was working fine till now.Is there anyplace on the computer where I can get my original boot menu back.
In the previous O/Ss, you were able to configure the boot menu options in dual boot scenario's by editing the 'boot.ini' this however, is not the case in Windows 7 and past 2000 O/s.
This is because i have an operating systen showing up in my menu that does not exist anymore and i dont want to wipe the O/S (Windows 7) to remove it as i have other O/S that are working fine.
