I am doing an upgrade from XP to Windows 7. I have done this numerous times with no problems until today. I put in the disc for the upgrade and loaded the Boot Device Menu (F12). Then I selected Onboard or USB CD-ROM Drive and I can hear the CD spinning but it does nothing. It wont load and the 'Onboard or USB CD-ROM Drive' option stays highlighted. I just installed XP doing this exact same method because I installed a new harddrive and I had no problems. It only occurred once I put in the W7 disc.
when I turn on my pc I get the follolwing error message "Reboot and select proper boot device or insert boot media in selected boot device and press a key".
I am having a problem starting my PC! I have to start it in the boot menu under the RAID option. If I do not do this a message saying "Reboot and select proper boot device or insert boot media in selected boot device and press a key.." comes up, and just keeps popping up regardless of what I press! I would try using my boot disk but for the life of me I can't find it, and as windows 7 was already installed on this computer when we got it 3 year ago, I can't accurately recall if it came with one!I am no expert on BIOS, but I have read other problems similar to this one, and know that if I don't have the boot disk or the OS disk, I will need to know that at least.I am curious if the (Hard drive) is the issue. The BIOS tells me that anything in parentheses is disabled from corresponding type menu.
I recently received a new laptop. After starting after time with no problems I received a blue screen with Verticle black stripes then it shut off. After attempting to reboot it I receive this error in a black DOS like screen.
"Intel UNDI, PXE-2.1 (built 083) Copyright (C) 1997-200 Intel Corporation This Product is covered by one or more of the following patents: US5,307459, US5,434,872, US5732,094, US6579,884, US6115,776 and US6,327,625 Realtek PCIe FE Family Controller Series v120 (01/26/10) PXE-M0F: ExitingPXEROM.
Reboot and select proper Boot device or Insert Boot Media in selected Boot device press a key"
When it crashes the cursor still moves and sometimes I can move windows around but then it all shuts down and sometimes briefly shows a blue screen of death. On reboot I sometimes get this message and have to reboot again. "Reboot and select proper boot device or insert boot media in selected boot device and press a key"It's a brand new box just built last week but no warranty and I would not even know what part to replace if it's hardware related.I've attached a Hijackthis to the post if it helps but I don't think it's virus related at all.
When left alone..."Reboot and select proper boot device or Insert boot media in selected boot device and press a key"I have a new(ish) cpu that I bought last Christmas, it works great and it has not crashed on me whenever I am using it. However, when I leave it on overnight (usually when it is downloading something big), when I wake up in the morning I am greeted with a black screen with the words:"Reboot and select proper boot device or Insert boot media in selected boot device and press a key"When this happens I simply press the power button a few seconds to turn it off, then turn it on again and it boots normally. (pressing a key only results in the message being repeated)What infuriates me is that it only ever happens when I leave it on overnight so I don't know when and how exactly it occurs but it almost always does. Like I said earler, it never does this when I am using it as it works fine otherwise. It just won't stay on overnight when I need it to.
System info: Windows 7 ultimate x64 (full retail, installed once from scratch) Intel core i7 4200k Nvidia Gtx 560ti 16gb RAM Seagate 500gb hdd for OS, 2Tb samsung and 1Tb seagate hdd for storage (all internal drives; no external drives attached) Connected via hdmi to Pioneer receiver vsx 1121 then to 42" 720p Panasonic Plasma Tv
So im having issues with my PNY 8gb Flash drive that im trying to use to install 7 onto my desktop. The problem is that whenever I insert it into my computer and try and boot off it, (Clean install btw) even though the bios menus detect the drive when I boot it acts as though it didnt insert. I need my desktop.
I am running an Advent desktop PC and its stats are as follows; Intel Core i5-2310 CPU @ 2.90GHz 8GB RAM Win 7 64 bit.The problem I am having is when ever i boot up the computer it shows the Advent logo-screen where I can access the boot menu etc but then it goes to a black screen with a cursor/underscore flashing in the top left... This screen stays for quite a while and I am not sure if it stops because of a key I have pressed or just because it has run its course but after it disappears the computer goes back to the logo-screen for a moment and proceeds to boot up as normal except slightly slower than usual.It is a relatively new computer and it has no problems running at all once the boot up is complete it is fast and as friendly as ever.
Last night I installed Windows 7 (x64) on a separate partition.
Anytime I had tried this in the past, using Vista, it always detected the Windows XP partition, and gave me a boot menu with "Earlier Version of Windows" option to boot to.
This is not so with Windows 7.
How can I get the boot menu to show both options, to boot to XP or to Windows 7?
I got this new computer and at some point I went into the boot option to try and install my PC to it's factory settings but when I opened up the boot option it showed something like this but not exactly:
1. MC43689SGDAL7 2. MATSHITADVD-RAM
This is very random and unusual and I have found no fix and as you should know it should look something like this:
1. CD/DVD Drive 2. USB 3. Hard Drive 4. something else
Even in my Bios menu it shows the same thing and I cannot change it so I can't boot from a USB or CD, etc.
i did a terrible mistake. i installed windows 7 first on one drive and then i install windows xp on separate drive. and when i restart there was no boot menu to choose the OS from list only windows xp started straight away. i did not knew about EasyBCD . and i put my windows 7 DVD and run recovery. now i can goto windows 7 but xp is missing again. is there any way i will not install xp from beginning and windows 7 can add boot menu in startup to choose xp or 7.
i left my computer on in the morning and i come back and see this message reboot and select proper boot device or insert boot media in selected boot device and press a key i just installed windows 7 64 bit yesterday and built the comp a few days ago here are the specs
RAIDMAX HYBRID 2 RX-630SS 630W ATX12V V2.2/ EPS12V SLI Ready CrossFire Ready Modular Modular LED Power Supply G.SKILL Ripjaws Series 8GB (2 x 4GB) 240-Pin DDR3 SDRAM DDR3 1600 (PC3 12800) Desktop Memory Model F3-12800CL9D-8GBRL Western Digital Caviar Blue WD3200AAKX 320GB 7200 RPM 16MB Cache SATA 6.0Gb/s 3.5" Internal Hard Drive -Bare Drive intel core i5-2500k ASUS P8Z68-V LX iHas 124b
I'm busy installing a computer for a friend but we're stuck at an error.This are the computer specs to start with:
Asus P8P67-M Pro Rev 3 1 TB Samsung Spinpoint F3 HD103SJ Intel Core i5 2500K Corsair 8GB 1600 mhz Scythe Mugen 2 rev B GeForce GTX 570 Lian Li Lancool PC-K56 Corsair CX 600W Optiarc AD-72605 DVD RW SATA
The BIOS boot priority is 1# Dvd Player and 2# Harddrive (so it detects both).It's also a SATA harddrive so I don't need to do anything with jumpers.Then when I insert the Windows 7 DVD it outputs the following error:reboot and select proper boot device or insert boot media in selected The PC is new and got build at a store so the only thing I need to do is install the software.
Just installed a new Seagate Barracuda 500 GB replacing an exact model that has failed."Reboot and select proper boot device or insert boot media in selected Boot device and press any key."When I plug the old C drive back in it boots, but the new one won't. What should I do?
My laptop shows the following message when I turn it on- Realtek PCIe FE Family controller Series v1.19(08/10/09) PXE-EGI-Media test failure,check cable PXE-MOF-Exiting PXE ROM
Reboot and select proper boot device or insert boot media in selected boot device and press a key. I am using a Dell Inspiron N5010 with windows 7 OS.
My BIOS boot priority: 1st boot Hard Drive 2nd boot cd/dvd/cd-rw drive 3rd boot USB storage 4th boot Diskette drive 5th boot eSATA 6th boot Network
i left my computer on in the morning and i come back and see this message reboot and select proper boot device or insert boot media in selected boot device and press a key i just installed windows 7 64 bit yesterday and built the comp a few days ago here are the specs
RAIDMAX HYBRID 2 RX-630SS 630W ATX12V V2.2/ EPS12V SLI Ready CrossFire Ready Modular Modular LED Power Supply G.SKILL Ripjaws Series 8GB (2 x 4GB) 240-Pin DDR3 SDRAM DDR3 1600 (PC3 12800) Desktop Memory Model F3-12800CL9D-8GBRL Western Digital Caviar Blue WD3200AAKX 320GB 7200 RPM 16MB Cache SATA 6.0Gb/s 3.5" Internal Hard Drive -Bare Drive intel core i5-2500k ASUS P8Z68-V LX iHas 124b
I just changed my PSU and upgraded my graphics card today. I tried booting it up and it came up with this message "reboot and select proper boot device or insert boot media in selected boot device and press a key."I'm pretty sure I got all the cables in correctly and I only have one harddrive. No externals.By the way, I don't have my windows 7 CD because I let a friend borrow it and I won't be able to get it back for some time. However, I do have a Windows XP CD if that helps in any way.
I am receiving an error message on my Gateway One ZX4300-01e. It continues to ask me to: Reboot and select proper boot device or insert Boot Media in selected boot device and press a key.I bought this computer on ebay. it was a seller refurbished item and does not have a boot recovery disk.
I just put together a PC from scratch and when i start my computer it says: reboot and select proper boot device or insert boot media in selected boot device and press a key.I put in a copy of Windows 7 Home to boot, and it just continues to say that when i restart/press a key.
I'm running Windows 7 Home Premium, 64 bit, on a Gateway, motherboard is EG43M. It is a dual-core Pentium, CPU E5300 @ 2.60GHz.
I have a virus that calls for running Windows Defender Offline. I'm trying to boot my PC from a USB drive to run WDO, but it doesn't work. I've tried pressing F12 on startup to enter the Boot Menu to change it. How do I gain entry to the Boot Menu to change to boot from USB drive?
i have a toshiba laptop , which has vista and i then managed to dual boot it with windows7 it was working fine , but i then had to restore my vista to factory settings -
i think the bootloader is overwritten im not fully sure - the windows 7 partion is still there when i go on my computer
My pc switches on but doesn't boot. I normally just get a black screen with a flashing underscore in top left corner. I can get into the start up menu and then the boot menu and boot the pc that way. I have on the odd occasion received an error message, something about the keyboard, i cant remember exactly its been a while since i seen that message.
I have an eMachines E528 with an Intel Celeron 900 processor. I got the blue screen of death and was able to use the Windows system repair disk to reinstall windows 7. However, while trying to "update" Windows 7 with the SP1 update through the windows update tool, I got the blue screen of death again. This time I cannot boot the computer. I've tried a recovery disk, a system repair disk, a new clean copy of windows 7, and a Partition Wizard bootable CD. Everytime it gets to the point of loading ANY menu, it freezes up and does nothing for hours. I have spent so much time researching and trying things from other forums, and I have gotten nowhere. get a fresh copy of windows on this computer? or get me into the menu that allows me to restore from a system repair disk? I have even tried an "eRecovery" without even going into Windows by pressing ALT F10 at the logo screen as the computer is booting up, and I still get hung up while the application is trying to load the menu options.
I have Windows 7 and XP installed on separate partitions of one drive. I also had a 2nd hard drive, for backing up data, which I think has died so I disconnected it. This machine used to automatically boot into Windows 7, but now it goes to XP. There was nothing installed onto the 2nd drive so I have no idea why disconnecting that would change anything. I've checked, and the Windows 7 files are still available on the working hard drive.Previously, if I wanted to boot into XP instead of 7, I would go into the BIOS and change the boot order of the 2 hard drives, and then it would automatically boot into the other OS.One other thing I remember, is that when I had the Windows 7 loaded up, it showed the Windows 7 partition as being the C drive. When I have XP turned on, it shows the Windows 7 partition as being D drive and XP as being in the C drive.
