I have been dual booting for about 6 months now with no problems.I installed XP first and then Windows7.When I boot the computer it goes to Windows7.It gives me the option on the screen to choose other operating system which I do.All of a sudden I can't get into XP,it just stays a black screen.So I booted back to 7 and checked the boot menu and only Windows7 is listed,don't know why,it was working fine till now.Is there anyplace on the computer where I can get my original boot menu back.
i have an acer aspire notbook with vista home premium original and fully licend by manufacture.. now when i installed windows 7 ultimate and activated it.. the boot menu become like this
windows 7 ultimate (recovered)
windows vista home premium (recovered)
now when i start windows 7 it starts with vista green bar not with windows 7 new logo..
how can i get back the original menu without the word (recovered) , and for sure get the windows 7 logo back .. with the activation validated with it.
well i got a question actually i dont even know if it has anything to do with the topic but, i dont know how , i change the default program for all the programs in the pc , including interent explorer, google chrome and practicly all, the icon also change, it is the one of the default program which i change them all to ... my question is, how do i cange them back to the original program they were?
i was speaking to my brother last nite who was trying to open a website it said he needed Adobe pdf , so he downloaded this and was able to see the site ,however after he noticed that all the desktop icons had adobe signs in them, my question is why did this happen and how does he restore icons back to there original appearance.
How can I convert my programs back to their original state. They are coming up in word pad but they won't open and it says in word p[ad that this program cannot be run in DOS mode
During Startup, i need to click the user image to get it enlarged....and that is irritating to me......I did System Restore, things got normal...but when i installed YOUCAM 5 things became my problem....
I recently added a hard drive to my computer (SSD), and installed Windows 7 x64 onto it. The result being a dual boot system, which by default boots to the SSD, and optionally (by Windows Boot Menu), can be booted to the original drive (standard mechanical drive).
Initial setup went fine, however I decided to customize the Windows Boot Menu, so that logical names could be associated with each operating system instance. To do this I used EasyBCD and I altered the names in the Windows Boot Menu from: Quote:
Windows 7 Windows 7
to... Quote:
Windows 7 - SSD Windows 7 - Standard Drive
Shortly after the modification I noticed that I was no longer able to boot into the original OS. Instead I was being presented with a "Repair Windows" option. Figuring that my EasyBCD "tampering" may have had something to do with the issue I decided to change the names back to "Windows 7" in the Windows Boot Menu. However doing so had no positive impact on boot up of the original OS.
After booting again into the original OS I accepted the "Repair Windows" option, and then left the computer over night to do it's "thing". After completion of the "Repair" the situation has deteriorated -
* Windows doesn't load (the same as before)
* Windows doesn't present a "Repair Windows" option (it did before)
* The computer reboots a short period after the "Starting Windows" screen is presented
As a side note the drive is in good health, and all data on it can be read from within Windows 7 when I boot to the SSD OS.
I recently added a hard drive to my computer (SSD), and installed Windows 7 x64 onto it. The result being a dual boot system, which by default boots to the SSD, and optionally (by Windows Boot Menu), can be booted to the original drive (standard mechanical drive).
Initial setup went fine, however I decided to customize the Windows Boot Menu, so that logical names could be associated with each operating system instance. To do this I used EasyBCD and I altered the names in the Windows Boot Menu from: Quote: Windows 7 Windows 7 to... Quote: Windows 7 - SSD Windows 7 - Standard Drive Shortly after the modification I noticed that I was no longer able to boot into the original OS. Instead I was being presented with a "Repair Windows" option. Figuring that my EasyBCD "tampering" may have had something to do with the issue I decided to change the names back to "Windows 7" in the Windows Boot Menu. However doing so had no positive impact on boot up of the original OS.
After booting again into the original OS I accepted the "Repair Windows" option, and then left the computer over night to do it's "thing". After completion of the "Repair" the situation has deteriorated -
* Windows doesn't load (the same as before)
* Windows doesn't present a "Repair Windows" option (it did before)
* The computer reboots a short period after the "Starting Windows" screen is presented
As a side note the drive is in good health, and all data on it can be read from within Windows 7 when I boot to the SSD OS.
I have Windows 7 on my computer. On the top of an internet screen I used to have the words "File, Edit, View, Favorites, Tools, Help". But for some reason I lost those words. How can I get that toolbar back?
I have a problem with the entries in the start menu. Normaly I have Swedish which is what the system is set to use. But for some reason the entries in the start menu is english now!How can I change that back? Maybe it hapened when I installed and run the program "Advanced System Care" which was suposed to be a good program, but I'm not sure. I didn't help to uninstall it by the way.
For some reason, my start menu has suddenly become ridiculously tall, spanning the entire height of the screen. This image might give a better idea: imgur: the simple image sharer.
I have no idea how or why this happened. I tried searching for the problem, but I can't find a single thing even remotely related. My recent items count is at 0, so it's nothing to do with that. I've already tried fiddling about with the setting for that, but with no success at all. I tried a system restore to before this occurred, but this had absolutely no effect either. It's only affecting this profile, and no others (although, really, the only others are guest or temp accounts).
I watch videos from this site Poker Netcast | Live At The Bike | LABTTheir login is https.Ive been in IT for 15 years and even this has stumped me.When I go to login in IE9 starts looping from the login page to the https page and back to the original page and never ends. I load firefox, same issue. I load Crome, it worked for 1 day then same issue. It used to login in fine last week. It logs in fine on my 2 other PCs and my Kindlefire.I have checked for viruses with Avast and A-Malware Bytes in safe mode - nothing. These 2 pick up 98% of stuff. Personally I dont think its a virusn IE9 - Deleted browsing history, cookies, temp internet files, everything under the Geneeral/Browsing History section. Did a disk cleanup, put the site inthe trusted zone, turned off popup blocker just in case, Cleared SSL state, Reset IE9. Zippo
I am running an Advent desktop PC and its stats are as follows; Intel Core i5-2310 CPU @ 2.90GHz 8GB RAM Win 7 64 bit.The problem I am having is when ever i boot up the computer it shows the Advent logo-screen where I can access the boot menu etc but then it goes to a black screen with a cursor/underscore flashing in the top left... This screen stays for quite a while and I am not sure if it stops because of a key I have pressed or just because it has run its course but after it disappears the computer goes back to the logo-screen for a moment and proceeds to boot up as normal except slightly slower than usual.It is a relatively new computer and it has no problems running at all once the boot up is complete it is fast and as friendly as ever.
Last night I installed Windows 7 (x64) on a separate partition.
Anytime I had tried this in the past, using Vista, it always detected the Windows XP partition, and gave me a boot menu with "Earlier Version of Windows" option to boot to.
This is not so with Windows 7.
How can I get the boot menu to show both options, to boot to XP or to Windows 7?
I got this new computer and at some point I went into the boot option to try and install my PC to it's factory settings but when I opened up the boot option it showed something like this but not exactly:
1. MC43689SGDAL7 2. MATSHITADVD-RAM
This is very random and unusual and I have found no fix and as you should know it should look something like this:
1. CD/DVD Drive 2. USB 3. Hard Drive 4. something else
Even in my Bios menu it shows the same thing and I cannot change it so I can't boot from a USB or CD, etc.
i did a terrible mistake. i installed windows 7 first on one drive and then i install windows xp on separate drive. and when i restart there was no boot menu to choose the OS from list only windows xp started straight away. i did not knew about EasyBCD . and i put my windows 7 DVD and run recovery. now i can goto windows 7 but xp is missing again. is there any way i will not install xp from beginning and windows 7 can add boot menu in startup to choose xp or 7.
I am doing an upgrade from XP to Windows 7. I have done this numerous times with no problems until today. I put in the disc for the upgrade and loaded the Boot Device Menu (F12). Then I selected Onboard or USB CD-ROM Drive and I can hear the CD spinning but it does nothing. It wont load and the 'Onboard or USB CD-ROM Drive' option stays highlighted. I just installed XP doing this exact same method because I installed a new harddrive and I had no problems. It only occurred once I put in the W7 disc.
I'm running Windows 7 Home Premium, 64 bit, on a Gateway, motherboard is EG43M. It is a dual-core Pentium, CPU E5300 @ 2.60GHz.
I have a virus that calls for running Windows Defender Offline. I'm trying to boot my PC from a USB drive to run WDO, but it doesn't work. I've tried pressing F12 on startup to enter the Boot Menu to change it. How do I gain entry to the Boot Menu to change to boot from USB drive?
i have a toshiba laptop , which has vista and i then managed to dual boot it with windows7 it was working fine , but i then had to restore my vista to factory settings -
i think the bootloader is overwritten im not fully sure - the windows 7 partion is still there when i go on my computer
My pc switches on but doesn't boot. I normally just get a black screen with a flashing underscore in top left corner. I can get into the start up menu and then the boot menu and boot the pc that way. I have on the odd occasion received an error message, something about the keyboard, i cant remember exactly its been a while since i seen that message.
I have an eMachines E528 with an Intel Celeron 900 processor. I got the blue screen of death and was able to use the Windows system repair disk to reinstall windows 7. However, while trying to "update" Windows 7 with the SP1 update through the windows update tool, I got the blue screen of death again. This time I cannot boot the computer. I've tried a recovery disk, a system repair disk, a new clean copy of windows 7, and a Partition Wizard bootable CD. Everytime it gets to the point of loading ANY menu, it freezes up and does nothing for hours. I have spent so much time researching and trying things from other forums, and I have gotten nowhere. get a fresh copy of windows on this computer? or get me into the menu that allows me to restore from a system repair disk? I have even tried an "eRecovery" without even going into Windows by pressing ALT F10 at the logo screen as the computer is booting up, and I still get hung up while the application is trying to load the menu options.
I have Windows 7 and XP installed on separate partitions of one drive. I also had a 2nd hard drive, for backing up data, which I think has died so I disconnected it. This machine used to automatically boot into Windows 7, but now it goes to XP. There was nothing installed onto the 2nd drive so I have no idea why disconnecting that would change anything. I've checked, and the Windows 7 files are still available on the working hard drive.Previously, if I wanted to boot into XP instead of 7, I would go into the BIOS and change the boot order of the 2 hard drives, and then it would automatically boot into the other OS.One other thing I remember, is that when I had the Windows 7 loaded up, it showed the Windows 7 partition as being the C drive. When I have XP turned on, it shows the Windows 7 partition as being D drive and XP as being in the C drive.
