Bootmenupolicy=standard For Windows 7 Hides Multi Boot Menu?
Aug 27, 2012
I have defined BootMenuPolicy for Windows 7 loader as standard(1) in a multi boot system with Windows 8 and Windows 7 (and other OSs) and set Windows 7 as default loader. System boots directly to Windows 7 - no boot menu is displayed.So what is prohibiting boot manager to display boot menu ?(If bootmenupolicy for Win 7 is set to legacy(0) boot menu is displayed.)
bcdedit output:
Windows Boot Manager
--------------------
identifier {bootmgr}
device partition=D:
description Windows Boot Manager
locale en-US
inherit {globalsettings}
Installation copiers Multi Boot OS with Multi software?
I have just just purchased some new PC with different configration AMD Phenom II X4 965, Gigabyte 890GLX Motherboard, 4GB RAM, 500GB HDD and 2nd AMD Athalon 635 with Gigbyte 875 Mothboard -4 GB RAM, 500GB HDD.I want to use these machines for Gaming as well as for teaching and for Internet browsing and web site development
What i Did i had Installed Multiple OS Windows XP SP3 32Bit, Windows XP SP2 64 Bit, Windows 2003 server 32 and 64 bit, Windows Vista 32 & 64 Bit, Windows 2008 server 32 and 64 bit , Windows 7 32 and 64 bit.
Now i want to install general softwares like Office, Adobe Master collection cs5 , Autocad, Coral , Visual studio Java, C, SQl Server, Oracle and the list caries on
I want that i dont have to install these software again and again on every software so that the space is not occupied and i can use same program files folder for each and every OS and time is also saved from installing the software.
For that i have seen some installation copiers (backups) which remain in memory before installation and records the information of registry and system files being copied and records and the can again be copied to the different OS.
Is there any ways to do these which installation copier backup is good for doing this . finding such softwares which can copy or backup installation files registries and i can just use the same installers.
I'm setting up my system drive with 3 operating systems:
1) Windows 7 64 bit (for home use) 2) Win XP (for legacy programs) 3) Windows 7 64 bit (for work use)
...in that order on the hard drive. Rather than using Windows own boot manager, I'm using the open source GAG boot manager (which, like lots of third party boot managers, runs before any OS loads so you can pick which OS to run - and then hides the other OS's and their entire partitions until you reboot.) I've done this sort of thing with multiple WinXP loads before, no issues. In fact, this very hard disk used to have three WinXp loads on it (in position 1 and 3 above). I formatted those partitions and replaced them with the Win7 loads, which is when the problem started.Everything worked fine until I added the SECOND load of Win 7 (third on the hard drive, as above). It installs properly, but when I try to run it, it hangs on the "Starting Windows..." screen (and the spinning windows logo just stays spinning infinitely).if I then immediately reboot and run the FIRST load of Windows 7 (which was hidden, worked fine before, and lives on its own separate partition), I get a screen right away saying a problem happened last time I ran it! Which isn't true - the problem happened when I just ran the SECOND load of Windows 7, not the first! Remember, these Win7 loads are totally separate. But for some reason, it thinks there was a problem. It even asks me if I want to enter repair mode. Spooky...Anyway, I do NOT choose to repair and instead just say "run normally". And everything then boots fine. (Of course!) And sure enough, if I shut down and simply choose to run that same first load of Win7 a second time, it again works with no problems reported. BUT... if I then proceed to run the SECOND load of Windows 7, it again hangs on the "Starting Windows..." screen, and - you guessed it - if then try to run the FIRST copy of Win7, it will again report it had a problem last time it was loaded. Which starts the whole thing over again....
I have one HDD C: with Windows 7 64bit and another HDD from my previous dual boot PC with two partitions C: and E:, both winX pro.How is it possible to combine both HDDs, creating a multi boot system having as C: my Windows 7 drive?
Is it possible to run the 3 OS', 7, XP and 98SE via a multi boot setup and if so can anyone advise on how to do this or maybe have a link to a Tutorial showing how it can be done.
Reason i ask is i am looking to play some old school games that you just cant play regardless of Compatibility Mode and other 3rd party apps.
I don't know if this is a define behavior or a known bug, in any case the following are the steps to reproduce it:- Close all foreground applications.- Run Windows Explorer.- Run another applications.- Do the ALT + TAB (or ALT + TAB + SHIFT ) key combinations. A new "window" on the center of your desktop should appear. This window (I don't remember the name) shows all foreground applications actually running. You should see only two applications: Windows Explorer and the other one. Move back on Windows Explorer selecting it.- On Windows Explorer select a file to delete or create an empty one and select it.- Now, click the Canc key button or click on the file and from the popup menu that appears click on Delete menu item.- At this point ,the Windows Explorer Delete Folder dialog should appear, asking you to delete or not the file.- Do not click on the dialog, leave it as it is.- Now, move on to the other foreground application, with the ALT + TAB (or ALT + TAB + Shift) key combinations.
This problem also started today on my system with 64 bit windows. The problem occurs when adding tags or other editing jpg file types in all the graphic programs i have on my machine. The problem only started today and has not been a problem in the last 3 years i have been using windows 7 including betas.
The files attributes are being changed by the operating system during system saves to being a hidden file type when it appears native windows 7 system calls are made, it isn't happening during inital file saves from my camera or scanner. Yes the files are viewable in win exploerer when the show hidden files is check in file and search options and files can be changed back to being standard files by manually changing the attributes but this shouldn't be happening at all. JPG files are not a reserved system file type that are typically hidden my windows to prevent them from being deleted by ignorant system users.
Does anyone know of a way to take several different ISO's (multiple Windows ISO'sUbuntu, Hiren's Boot CD, etc.) and put them onto a flash drive from which I can boot and select one?I've tried several different utilities thus far - unetbootin, YUMI,XBoot - but none have allowed me to successfully add all my images.
I'm attempting to do an upgrade/update install of Windows 7 Professional over Vista Business. Everything checks out with the update advisor, the anti-virus and anti-spyware programs have been turned off (I have, however, left the Windows home-grown firewall on), but shortly after the temporary files have been copied and the setup begins, I received a dialog box saying that an unexpected error has occurred and that I should retry the installation.
My system is multi-boot with the first partition for Windows XP Professional, the second with Vista Business, and the third and fourth with OpenSuse Linux. I'm trying to upgrade/update the Vista partition. SP1 has been installed for Vista, and all of the updates contained in SP2 have also been installed.
I was originally running just XP Pro (and still use as my main OS) on C:. Installed Vista (didn't activate it yet and it's past 30 days) on Drive G:. Installed Ubuntu on D:. Installed Windows 7 RC1 son S: (in that order). When I start my computer, Windows 7 is the Default OS. I can't change the default OS to XP in Windows 7 (it only gives me the option for Vista).
When I start in XP it shows Windows 7 (7 and xp only options) as default and when I try to select XP as default it jumps right back to 7. I'm thinking I may have to activate my Vista and do it through Vista. [all OS run perfectly no issues at all] Thoughts? Ideas?
Is there a way (or tutorial) to create a repair disc for a multi boot Windows 7/Vista on a USB flash drive? In other words would like to be able to use a USB flash drive in an emergency to boot into a multi boot computer using Windows 7/Vista.
I see where there is a way to create a Vista/XP multi boot USB repair disc but not one for Windows 7/Vista multi boot. Evidently the boot files for Vista/XP are different from the boot files for Windows 7/Vista. I have a 4GB flash drive that I would like to use.
FIX (with SavePart, tried other partition utilities and editing MountedDevices to no avail)
Hope this helps someone else with Wrong Drive Letter Problems
Installed Windows 7 RC and all was well with XP Dual Boot.
After some experimenting(BSD,LINUX,etc), Windows 7 would not boot, so popped in the DVD and let Windows 7 repair the boot.
Windows 7 now booted, but when booting XP on E: , it was now assigned the wrong Drive letter D: and would boot to just before the Logon Prompt and hang(same in safe mode.)
After much research and trial (including editing the HKLM/SYSTEM/MountedDevices hive of the XP install from within Windows 7 to change the drive letter) this was the fix.
This particular XP boots from Partition/Drive E: in Windows.0 directory (yeah, i know, been this way for years)
I have a strange problem, I run a 9800GTX+ with a dvi to vga adapter to my monitor and a dvi to HDMI adapter to my onkyo TX-SR507 amplifier which in turn has a hdmi to my LCD TV.
I use the amp for sound from the pc down the hdmi lead.
now if my TV is not on (but the amp is) then windows decides to HIDE my desktop on my monitor with wallpaper... i mean no mouse, no taskbar, nothing... but everything is still there BEHIND wallpaper.. EG: if i press email button on keyboard when i put TV on again outlook will be sitting there on my monitor.
turning my amp off also works.
i have tried CLONING displays but still same thing??
had no problem like this on vista - and i have the newest graphics card drivers.
I am running Windows 7 x64 on an AMD 970. The boot drive is a Corsair CSSD-F120GB3 (Users, ProgramData reside on a separate, standard HDD; this was done correctly at installation).After several hours to 7 days the PC would BlackScreen to a blinking cursor. This happened for months. Eventually, after replacing every other piece of hardware and updating all drivers, swapped out the SSD (copied the image to an older WD 250GB drive).I have run 17 days without a crash.I have run every health check I can on the SSD, but no errors.
Quote: ******************************************************************************* * * * Bugcheck Analysis * * * ******************************************************************************* CRITICAL_OBJECT_TERMINATION (f4) A process or thread crucial to system operation has unexpectedly exited or been terminated.
Anytime I click the Show Desktop button at the bottom-right in Windows 7, it shows me the desktop, BUT my sidebar gadgets all disappear. They all re-appear as soon as I un-minimize anything on my taskbar. Rebooting doesn't change this behavior. If the problem isn't clear, here's more of a step-by-step of what's happening:
-I have a few Google Chrome windows up, let's say. -I *hover* over the Show Desktop button, and it shows my desktop, and my sidebar gadgets are all there. No problem so far. -I *click* on the Show Desktop button, and it shows the desktop, *and* the sidebar gadgets are suddenly gone, as if the sidebar has also been hidden in order to show the desktop. -Let's say I click on the Start menu and open sound recorder...The sidebar gadgets re-appear at this point. Likewise if I restore one of the windows that's minimized on the taskbar.
I tried installing XP and Windows 7 on my laptop and now my computer won't boot at all. I get the message "Disk Read Error. Press CTRL+ALT+DEL to restart" and this just keeps looping the same thing. I can't get it to go far enough into a boot to read a Windows installation disc, I can only access the BIOS. Right before this, I could get XP to load, but when it finished installing and restarted, it would try to run the setup again rather than booting the OS. Extremely lost, and any advice as to get rid of the "Disk Read Error" or a multi-boot once I get past the "Disk Read Error"
I am running an Advent desktop PC and its stats are as follows; Intel Core i5-2310 CPU @ 2.90GHz 8GB RAM Win 7 64 bit.The problem I am having is when ever i boot up the computer it shows the Advent logo-screen where I can access the boot menu etc but then it goes to a black screen with a cursor/underscore flashing in the top left... This screen stays for quite a while and I am not sure if it stops because of a key I have pressed or just because it has run its course but after it disappears the computer goes back to the logo-screen for a moment and proceeds to boot up as normal except slightly slower than usual.It is a relatively new computer and it has no problems running at all once the boot up is complete it is fast and as friendly as ever.
Last night I installed Windows 7 (x64) on a separate partition.
Anytime I had tried this in the past, using Vista, it always detected the Windows XP partition, and gave me a boot menu with "Earlier Version of Windows" option to boot to.
This is not so with Windows 7.
How can I get the boot menu to show both options, to boot to XP or to Windows 7?
i have a toshiba laptop , which has vista and i then managed to dual boot it with windows7 it was working fine , but i then had to restore my vista to factory settings -
i think the bootloader is overwritten im not fully sure - the windows 7 partion is still there when i go on my computer
I have Windows 7 and XP installed on separate partitions of one drive. I also had a 2nd hard drive, for backing up data, which I think has died so I disconnected it. This machine used to automatically boot into Windows 7, but now it goes to XP. There was nothing installed onto the 2nd drive so I have no idea why disconnecting that would change anything. I've checked, and the Windows 7 files are still available on the working hard drive.Previously, if I wanted to boot into XP instead of 7, I would go into the BIOS and change the boot order of the 2 hard drives, and then it would automatically boot into the other OS.One other thing I remember, is that when I had the Windows 7 loaded up, it showed the Windows 7 partition as being the C drive. When I have XP turned on, it shows the Windows 7 partition as being D drive and XP as being in the C drive.
I had installed Mint Linus as a dual boot through ML to try. After carefully removing it per instructions, when I boot I get the Windows Boot Manager, which I never had and don't need as I only have Win 7. How do I get rid of it (extra boot time).
I recently installed Windows 7 from a USB drive (16GB) instead of the disc. One of the issues I've encountered after was that in my Win7 boot up, I'm taken to the boot selection menu, which is usually reserved for multi-booting, or crash recovery.The options shown are...- Windows 7 Ultimate- Windows EMS Setupand towards the bottom of the screen some type of diagnostic option. I can't remember off the top of my head.Is there any way I can remove the setup option from this menu? I would like to boot straight into Windows without timing out, or having to select it manually.
I have Windows XP and Ubuntu Wubi on my PC, and Windows 7 on top of that. Windows Xp is installed on C: and 7 is on another drive. I have formatted the drive on which 7 was installed. But I still get the 7 boot menu at boot. Then after selecting "Earlier version of windows", I get the XP boot menu. I want to remove the 7 boot menu. I think the 7 MBR is installed on C:, so it is not removed.
I'm running Win7 64-bit on a home-built machine. I'm trying to reformat C drive.OK. So, my bios is set to boot only from CD. My keyboard is enabled in the bios. Yet when I use F12 to enter boot menu, hdd is shown as selected. When I scoll down, select CD and hit enter, my machine still boots from hdd. I have used imgburn to burn a new copy of the Win7 DVD in case mine was faulty..
I got this new computer and at some point I went into the boot option to try and install my PC to it's factory settings but when I opened up the boot option it showed something like this but not exactly:
1. MC43689SGDAL7 2. MATSHITADVD-RAM
This is very random and unusual and I have found no fix and as you should know it should look something like this:
1. CD/DVD Drive 2. USB 3. Hard Drive 4. something else
Even in my Bios menu it shows the same thing and I cannot change it so I can't boot from a USB or CD, etc.
i did a terrible mistake. i installed windows 7 first on one drive and then i install windows xp on separate drive. and when i restart there was no boot menu to choose the OS from list only windows xp started straight away. i did not knew about EasyBCD . and i put my windows 7 DVD and run recovery. now i can goto windows 7 but xp is missing again. is there any way i will not install xp from beginning and windows 7 can add boot menu in startup to choose xp or 7.
Everytime I restart the computer it boots into a repair mode,attempts to repair my computer, and then tells me "startup repair cannot repair this computer automatically". Why it's doing this I don't know,the system was working fine an hour ago.The only change I made was to attempt to make my RAID work, I rebooted, entered BIOS and changed my "Sata Operation Mode" to "RAID",then the problems started happening. I tried turning it back, even resetting BIOS defaults, but no go. During the boot up though I turned my comp off during the middle of windows loading, I wonder if that could have caused the problem?I know it's not recommended but it's something I've always done and never had a problem with.I've been trying to access my Advanced boot menu to start windows normally(perhaps it's stuck in some kind of repair cycle?) but pressing f8 does nothing, I've tried a thousand times.
I put in my Windows 7 disk and attempted a repair through there which halfway worked. When I boot up now it gives me two OS options to choose from, Windows and Windows 7 Home Premium (Recovered).The latter one boots up windows fine but all of my files are gone and it's telling me my copy of windows is not genuine! I had the majority of my data so it's not a huge deal to do a clean install but I would like to avoid that if possible.I'm using an asrock 890fx mobo with AMD processor.
So im having issues with my PNY 8gb Flash drive that im trying to use to install 7 onto my desktop. The problem is that whenever I insert it into my computer and try and boot off it, (Clean install btw) even though the bios menus detect the drive when I boot it acts as though it didnt insert. I need my desktop.
